PROTECTED SOURCE SCRIPT
Scalping Suitability Radar

🔍 Scalping Suitability Radar + BUY / SELL / STAND-BY Signals
What this indicator is
The Scalping Suitability Radar is a decision-support indicator designed to help traders avoid low-quality scalping environments and focus only on moments when the market shows:
Instead of forcing trades in slow, choppy, or low-energy markets, this indicator answers one critical question first:
“Is the market even worth scalping right now?”
Only after the market is deemed scalpable does it assist with:
🧠 Core Philosophy
Most losing scalps don’t fail because of bad entries —
they fail because the market conditions were never suitable.
This indicator is built around the idea that:
No setup is better than a forced setup.
🧩 What the indicator evaluates (automatically)
1️⃣ Volatility (ATR % + optional Bollinger Band Width)
2️⃣ Volume (Relative to recent average)
3️⃣ Trend Strength (ADX)
4️⃣ Momentum (MACD + Histogram)
5️⃣ Directional Bias (RSI + optional EMA filter)
🟢🟠🔴 Signal Types Explained
🟢 BUY / SELL
Triggered only when all market conditions are suitable, plus:
These are actionable scalp entries, not predictions.
🟠 STAND-BY (Anticipation Signal)
This is a unique feature designed to help you prepare before the entry fires.
STAND-BY appears when:
Market is already scalpable
MACD line and signal line are very close and converging
RSI is in range or very near range
Momentum is building toward a cross
What it means:
“Conditions are aligning — be ready, but don’t enter yet.”
This is especially useful for:
⚪ NOT SCALPABLE / GRAY BACKGROUND
When the background is gray:
📊 Decision Table (Built for Novice & Advanced Traders)
The on-chart table shows, in real time:
🟢 Green = suitable
🔴 Red = unsuitable
This turns the indicator into a learning tool, not just a signal generator.
⚙️ Suggested Settings by Asset Type
Use these as starting points, not absolutes.
📈 Index Futures / Index CFDs (ES, NQ, DAX)
Timeframes: 30s – 1m
Min ATR %: 0.10 – 0.15
Min BB Width %: 0.20 – 0.30
Volume Multiplier: 1.1 – 1.2
ADX Min: 18 – 22
RSI Buy/Sell: 52 / 48
EMA Filter: ON
🧾 Index Options (0DTE SPX, ES options)
Timeframes: 30s
🪙 Crypto (BTC, ETH, majors)
Timeframes: 1m – 3m
📊 Large-Cap Stocks (AAPL, MSFT, NVDA)
Timeframes: 1m – 5m
🧠 Best Practices
⚠️ Disclaimer
This indicator is provided for educational and informational purposes only.
Always test settings using paper trading or backtesting before using real capital.
What this indicator is
The Scalping Suitability Radar is a decision-support indicator designed to help traders avoid low-quality scalping environments and focus only on moments when the market shows:
- Sufficient volatility
- Adequate liquidity (volume)
- Real momentum
- Meaningful trend strength
- Clear entry timing
Instead of forcing trades in slow, choppy, or low-energy markets, this indicator answers one critical question first:
“Is the market even worth scalping right now?”
Only after the market is deemed scalpable does it assist with:
- BUY / SELL signals
- STAND-BY (anticipation) alerts
- A color-coded decision table explaining why a signal exists (or why you should stay out)
🧠 Core Philosophy
Most losing scalps don’t fail because of bad entries —
they fail because the market conditions were never suitable.
This indicator is built around the idea that:
No setup is better than a forced setup.
🧩 What the indicator evaluates (automatically)
1️⃣ Volatility (ATR % + optional Bollinger Band Width)
- Confirms price is moving enough to overcome:
- Spreads
- Slippage
- Time decay (especially for options)
- If volatility is too low → NO SCALP
2️⃣ Volume (Relative to recent average)
- Ensures liquidity is present
- Prevents entries during thin, slow tape
- Low volume = unreliable signals
3️⃣ Trend Strength (ADX)
- Filters out dead chop and weak direction
- Optional requirement that ADX is rising, not just high
4️⃣ Momentum (MACD + Histogram)
- Confirms energy behind price movement
- Histogram behavior helps anticipate crosses
5️⃣ Directional Bias (RSI + optional EMA filter)
- RSI confirms bullish or bearish pressure
- EMA filter aligns trades with short-term structure
🟢🟠🔴 Signal Types Explained
🟢 BUY / SELL
Triggered only when all market conditions are suitable, plus:
- MACD crossover in the trade direction
- RSI confirms directional bias
- Optional EMA trend alignment
These are actionable scalp entries, not predictions.
🟠 STAND-BY (Anticipation Signal)
This is a unique feature designed to help you prepare before the entry fires.
STAND-BY appears when:
Market is already scalpable
MACD line and signal line are very close and converging
RSI is in range or very near range
Momentum is building toward a cross
What it means:
“Conditions are aligning — be ready, but don’t enter yet.”
This is especially useful for:
- Fast timeframes (30s / 1m)
- Options scalping
- Traders who want to avoid chasing late entries
⚪ NOT SCALPABLE / GRAY BACKGROUND
When the background is gray:
- Volatility, volume, trend, or momentum is insufficient
- Any signals during this period should be ignored
- This is intentional capital preservation
📊 Decision Table (Built for Novice & Advanced Traders)
The on-chart table shows, in real time:
- Each indicator’s current value
- The minimum “good” range
- Color-coded status:
🟢 Green = suitable
🔴 Red = unsuitable
- Helpful notes like:
- “ADX rising”
- “MACD near cross”
- “RSI near LONG range”
- “Stand-by confirmed”
This turns the indicator into a learning tool, not just a signal generator.
⚙️ Suggested Settings by Asset Type
Use these as starting points, not absolutes.
📈 Index Futures / Index CFDs (ES, NQ, DAX)
Timeframes: 30s – 1m
Min ATR %: 0.10 – 0.15
Min BB Width %: 0.20 – 0.30
Volume Multiplier: 1.1 – 1.2
ADX Min: 18 – 22
RSI Buy/Sell: 52 / 48
EMA Filter: ON
🧾 Index Options (0DTE SPX, ES options)
Timeframes: 30s
- Min ATR %: 0.12 – 0.20
- Min BB Width %: 0.25 – 0.40
- Volume Multiplier: 1.2 – 1.4
- ADX Min: 20 – 25
- RSI Buy/Sell: 53 / 47
- STAND-BY: Highly recommended
🪙 Crypto (BTC, ETH, majors)
Timeframes: 1m – 3m
- Min ATR %: 0.15 – 0.30
- BB Width %: 0.30 – 0.50
- Volume Multiplier: 1.1
- ADX Min: 17 – 20
- RSI Buy/Sell: 51 / 49
- EMA Filter: Optional (depends on style)
📊 Large-Cap Stocks (AAPL, MSFT, NVDA)
Timeframes: 1m – 5m
- Min ATR %: 0.08 – 0.12
- BB Width %: 0.15 – 0.25
- Volume Multiplier: 1.2
- ADX Min: 18
- RSI Buy/Sell: 52 / 48
🧠 Best Practices
- Do not trade against gray background
- Use STAND-BY to prepare, not predict
- Combine with:
- Market structure
- Key levels
- Risk management
- One clean trade > ten forced trades
⚠️ Disclaimer
This indicator is provided for educational and informational purposes only.
- This is not financial advice
- It does not guarantee profits or prevent losses
- Markets behave differently across assets, sessions, and regimes
- You are responsible for choosing settings that match:
- Your trading style
- Your risk tolerance
- The specific asset you trade
Always test settings using paper trading or backtesting before using real capital.
สคริปต์ที่ได้รับการป้องกัน
สคริปต์นี้ถูกเผยแพร่เป็นแบบ closed-source อย่างไรก็ตาม คุณสามารถใช้ได้อย่างอิสระและไม่มีข้อจำกัดใดๆ – เรียนรู้เพิ่มเติมได้ที่นี่
คำจำกัดสิทธิ์ความรับผิดชอบ
ข้อมูลและบทความไม่ได้มีวัตถุประสงค์เพื่อก่อให้เกิดกิจกรรมทางการเงิน, การลงทุน, การซื้อขาย, ข้อเสนอแนะ หรือคำแนะนำประเภทอื่น ๆ ที่ให้หรือรับรองโดย TradingView อ่านเพิ่มเติมใน ข้อกำหนดการใช้งาน
สคริปต์ที่ได้รับการป้องกัน
สคริปต์นี้ถูกเผยแพร่เป็นแบบ closed-source อย่างไรก็ตาม คุณสามารถใช้ได้อย่างอิสระและไม่มีข้อจำกัดใดๆ – เรียนรู้เพิ่มเติมได้ที่นี่
คำจำกัดสิทธิ์ความรับผิดชอบ
ข้อมูลและบทความไม่ได้มีวัตถุประสงค์เพื่อก่อให้เกิดกิจกรรมทางการเงิน, การลงทุน, การซื้อขาย, ข้อเสนอแนะ หรือคำแนะนำประเภทอื่น ๆ ที่ให้หรือรับรองโดย TradingView อ่านเพิ่มเติมใน ข้อกำหนดการใช้งาน