เริ่มกันเลย

อินดิเคเตอร์และกลยุทธ์

Holistiq Indicator – Trade Protocol Holistiq Indicator – Trade Protocol is an educational overlay that identifies areas where multiple technical elements converge (candlestick patterns, VWAP, S/R, Fibonacci levels and gaps). It’s designed to help traders visualise confluence and build disciplined trade plans. This public script shows the full source code for transparency and learning. Use responsibly; not financial advice.
อินดิเคเตอร์ Pine Script®
โดย simonzomerdijk
Market Structure Strategy - Level 1This strategy identifies peaks and valleys (local tops and bottoms) in price to construct a dynamic market structure, labeling Higher Highs (HH), Lower Lows (LL), Higher Lows (HL), and Lower Highs (LH). From this evolving structure, the script determines the dominant market regime, which can be: Bull (green) – when price forms new highs and maintains a bullish structure, the strategy favors long entries. Bear (red) – when price forms new lows and confirms a bearish structure, the strategy favors short entries. Range (brown) – when price fluctuates between recent highs and lows, suggesting sideways conditions where no trades are initiated. The transition between these regimes depends mainly on four key parameters. The first parameter controls the lookback period into the past to find the top or bottom. The second controls the period of the looback to the right of the top or bottom. The “Entry Margin” parameter determines how much ranging behavior the model will detect before switching regimes. The 4 parameter select the source to construct the top and bottom, the close the wick, etc. The user can configure the strategy to run long-only, short-only, or both directions, depending on the market or preference. In addition to the core regime logic, the strategy includes several risk and trade management controls that are featured in all my strategies. Four oscillators are also integrated into the logic to detect short-term overbought and oversold conditions. These help the strategy avoid entering or exiting a trade when price has already extended too far in one direction, improving timing and potentially reducing false entries and exits. When overbought or oversold are detected, a red or green dot appears on the chart. The script is designed to be flexible across different assets and timeframes. However, to achieve consistent results, it is important to optimize parameters carefully. A recommended workflow is as follows: Disable the walk-forward option during the optimization phase. Optimize the first main parameter while keeping others fixed. Once a satisfactory value is found, move to the second parameter. Continue the process for subsequent parameters. Optionally, repeat the full sequence once more to refine the results. Finally, activate walk-forward analysis and check the out-of-sample results. This strategy is published as invite-only with hidden source code. Access may be granted upon request for research or evaluation purposes. It is part of a broader collection of technical analysis strategies I have developed, which focus on regime detection and adaptive trading systems. There are five levels of strategy complexity and performance in my collection. This script represents a Level 1 strategy, designed as a solid foundation and introduction to the framework. More advanced levels progressively add greater complexity, adaptability, and robustness. Finally, when multiple strategies are combined under this same framework, the results become more robust and stable. In particular, combining my suite of technical analysis strategies with my macro strategies and alternative data strategies, such as onchain for cryptocurrencies. It creates a multi-layered system that adapts across regimes, timeframes, and market conditions.
กลยุทธ์ Pine Script®
โดย mks17
Whale Breaker — HTF Order Blocks + Market Structure HUDWhale Breaker (Debug Edition) is an advanced Smart Money Concept (SMC) tool designed to project High Timeframe (HTF) order blocks onto your Lower Timeframe (LTF) charts while tracking market structure breaks (BOS / CHoCH). This debug build adds extra transparency: the mini-HUD not only shows HTF trend, last signal, and active order blocks, but also explains why no new block was created (e.g. no HTF BOS, body not found, ATR filter too strict, max-per-side limit). This makes it easier to fine-tune your settings and understand the logic behind the indicator. Key features: - HTF order blocks (e.g. 1h) projected into LTF charts (e.g. 15m) - Automatic right-extension until mitigation (MB) - Mitigation detection: blocks shaded once filled - ATR filter to remove insignificant micro-zones - Per-side cap: limit the maximum active BU/B blocks - Lookback-based pruning for clean charts - BOS/CHoCH arrows on chart (▲ green = bullish, ▼ red = bearish) - Compact HUD with trend, last signal, active OBs, legend, and debug reasons Usage: - Define your HTF (e.g. 1h) and trade entries on the LTF (e.g. 15m). - Wait for a BOS in HTF direction, then target the projected order block. - Stop Loss just beyond the OB, Take Profit at next opposite OB or using a fixed RRR. Note: This is a debugging/educational version to understand order block creation logic. For live trading, consider using the standard Whale Breaker.
อินดิเคเตอร์ Pine Script®
โดย Kammi07
SabinaCounter-trend strategy working only in long. Principle of Operation The strategy is based on market extremes, which serve as both the signals for opening a position and for closing it. These extremes possess data such as Open, High, Low, Close, and others. The length and the shift (positive or negative) of the extremes are also configurable. The extreme Ext is used for closing the position, and the extreme Ent is used for opening the position. Base Order A dedicated percentage of the deposit is specified. If the price crosses the Ent extreme, a long position is opened. Take Profit and Stop Loss The Take Profit level is calculated from the average price. A trailing stop order is present by default, which is set by the Ext extreme. When the price crosses this extreme, the position will be closed if the Take Profit has not yet been reached. Grid of Orders (Averaging) This section allows for enabling or disabling the grid of orders. In the order grid, you can specify the percentage below the base order at which the grid's limit orders should be placed. The grid step is also configurable. The leverage for all orders, including the base order, is set here. The order grid consists of 10 orders, and each order can be assigned its own percentage of the deposit. This gives the strategy greater flexibility compared to a standard DCA (Dollar-Cost Averaging) grid. Information Panel A table displays the historical price drop at a given moment, providing some insight into the potential liquidation level based on the selected leverage. The table also shows the deposit utilization (how much of the deposit is currently tied up).
กลยุทธ์ Pine Script®
โดย Len-in
FVG Zones with Signals█ OVERVIEW "FVG Zones with Signals" is a technical analysis tool that identifies Fair Value Gaps (FVG) on the chart and draws customizable zones in the form of boxes. It is ideal for traders using price action and market structure strategies, helping to identify potential imbalance zones and trading opportunities based on breakout and exit signals. With flexible size filter settings, box styles, and signal options, the indicator ensures clarity and precision on the chart. █ CONCEPTS The indicator is designed to identify potential entry points for trades based on FVG breakouts or retests. For chart clarity, a size filter for FVGs is included, based on a multiplier of the average candle size over a specified period. Why are FVGs important? FVG zones represent areas of market imbalance, often attracting price back to "fill" the gap. Larger gaps (with a higher size multiplier) have a greater chance of being retested, as they indicate deeper imbalances—leaving more unexecuted orders in those zones, which attracts liquidity. Market makers and institutions often return to these levels to "refresh" liquidity before further moves. However, not every large FVG is retested quickly—in strong trends, smaller imbalances may be ignored, and the location (e.g., near swing highs/lows) is critical for retest probability. █ FEATURES - FVG Detection: Identifies bullish and bearish FVGs based on size filters (Candle Size Period and FVG Size Multiplier), with automatic initialization of historical gaps up to 500 candles back. - Customizable Boxes: Draws FVG boxes with adjustable border colors, background gradients, border styles (solid, dashed, dotted), border widths, and transparency for both the background and the 50% FVG midline. - Breakout and Exit Signals: Generates "Break" signals (green upward triangle for breakouts above bearish FVG, red downward triangle for breakouts below bullish FVG) and "Exit" signals (circles for exiting the zone), with options to select signal types (Break, Exit, or Both). A break signal causes the box to disappear, leaving a triangle as a trace of the breakout, which may serve as a signal to open a position. Exit signals (circles) may also indicate entry opportunities but require additional confirmation, such as alignment with the main trend. - Midline: Automatically draws a dashed line at the 50% FVG level with adjustable transparency, aiding in assessing price reactions within the zone. - Box Limitation: Automatically removes old or inactive FVGs after 500 candles to avoid chart clutter. - Alerts: Built-in alerts for all signal types, including price and FVG type descriptions. █ HOW TO USE Add to Chart: Apply the indicator to your TradingView chart via the Pine Editor or Indicators menu. Configure Settings: - FVG Settings: Adjust Candle Size Period (default 20) and FVG Size Multiplier (default 1) to filter out small gaps—higher values generate fewer but more significant FVGs. - Box Settings: Configure colors and styles for bullish (green) and bearish (red) boxes, including background transparency (default 80) and midline transparency. - Signal Settings: Select signal types (Break, Exit, or Both) in Signal Type. Breakout signals appear after a candle closes outside the zone, while exit signals appear when exiting an FVG without a full breakout. - Styling: Customize signal colors (green for buy/up, red for sell/down) and shape sizes. Interpreting Signals: - Break Up Signal: A green triangle below the bar indicates a breakout above a bearish FVG, suggesting potential continuation of an uptrend. - Break Down Signal: A red triangle above the bar indicates a breakout below a bullish FVG, suggesting potential continuation of a downtrend. - Exit Up/Down Signal: A green/red circle indicates an exit from an FVG without a full breakout, which may signal the end of a correction or preparation for a reversal. - FVG Zones: If the price returns to an FVG and fills the gap, it may indicate equilibrium; an unfilled gap often leads to a retest. - Use signals in conjunction with other technical analysis tools for confirmation, such as RSI (to identify overbought/oversold conditions) or MACD (to confirm momentum). Analyze FVGs from higher timeframes—these zones act as stronger imbalance levels and carry greater structural significance. Exit signals (retests without breakouts) tend to be most effective when traded in line with the current trend. █ APPLICATIONS - Price Action Trading: Use FVG zones as dynamic support and resistance levels. In an uptrend, look for buying opportunities in bullish FVGs, where price often tests the gap before continuing. Combining with RSI, MACD, or Fibonacci levels enhances the significance of zones. - Breakout Strategies: Trade based on breakout signals from FVGs. A buy signal after breaking a bearish FVG may indicate a strong upward impulse, especially when supported by a rising MACD or RSI exiting oversold conditions. Larger FVG gaps (higher multiplier) have a greater chance of retest, as they indicate deeper imbalances. █ NOTES - Test the indicator across different timeframes and markets (stocks, forex, crypto) to optimize size filters for your trading style. - The indicator initializes historical FVGs up to 500 candles back, which may slow loading on longer charts. - For best results, use on high-liquidity markets where FVGs are more frequently retested. - In consolidation zones, the indicator may generate more false signals, so additional confirmation is recommended.
อินดิเคเตอร์ Pine Script®
โดย Uncle_the_shooter
Crypto ETFs AUM📘 Description: BTC ETFs AUM Tracker This indicator tracks the Assets Under Management (AUM) and daily inflows/outflows of the main U.S.-listed Bitcoin ETFs, allowing you to visualize institutional capital movement into Bitcoin products over time. It helps traders correlate institutional capital movement with Bitcoin price behavior. 🧩 Overview The script adds up the daily AUM changes from selected Bitcoin ETFs to estimate the total net inflow/outflow of capital into spot BTC funds. It also accumulates those flows over time to display the total aggregated AUM balance, giving you a clearer sense of market direction and institutional sentiment. Two display modes are available: Balance view: plots the cumulative sum of net inflows (total ETF AUM). Inflows view: shows daily inflows (green) and outflows (red) as histogram columns, together with a smoothed moving average line. ⚙️ Inputs Explained Base Settings Base Multiplier (base_multi) – Scaling factor applied to all AUM values. Leave at 1 for USD units, or adjust to display values in millions (1e6) or billions (1e9). Smoothing (c_smoothing) – Period length for the simple moving average used to calculate the smoothed mean inflow/outflow line. Show Balance (showBalance) – When enabled, displays the total cumulative AUM balance (sum of all net inflows over time). Show Inflows (showInflows) – When enabled, displays the daily inflows/outflows as colored columns. ETF Selection You can toggle which ETFs are included in the calculation: BIT (BlackRock) GBTC (Grayscale) FBTC (Fidelity) ARKB (ARK/21Shares) BITB (Bitwise) EZBC (Franklin Templeton) BTCW (WisdomTree) BTCO (Invesco Galaxy) BRRR (Valkyrie) HODL (VanEck) Each switch determines whether the ETF’s AUM and daily flow data are included in the total calculation. 📊 Displayed Values Green Columns → Positive daily net inflows (AUM increased). Red Columns → Negative daily net outflows (AUM decreased). Orange Line → Smoothed moving average of net flows, used to identify persistent inflow/outflow trends. Blue Line (if enabled) → Total cumulative AUM balance (sum of all historical flows). 💡 Usage Notes Works best on daily timeframe, since ETF data is typically updated once per trading day. Not all ETFs have identical data history; missing data points are automatically skipped. The indicator doesn’t represent official fund NAV or guarantee data accuracy — it visualizes TradingView’s public financial feed. You can combine this tool with price action or on-chain metrics to analyze institutional Bitcoin flows. Note: Some ETF data may not be available to all users depending on their TradingView data subscription or market access. Missing values are automatically skipped. 🧠 Disclaimer This script is for educational and analytical purposes only. It is not financial advice, and no investment decisions should be based solely on this indicator. Data accuracy depends on TradingView’s financial data sources and exchange reporting frequency.
อินดิเคเตอร์ Pine Script®
โดย mks17
2
Timebender 369 Time CalculatorOverview The Timebender Digits indicator visualizes rhythmic price cycles by marking confirmed swing highs and lows with dynamically colored numerical stamps. Each number is derived from the sum of the current candle’s hour and minute, reduced to a single digit (1–9), providing a visual “time signature” for each structural turn in market flow. This is a structural-pivot model inspired by LuxAlgo’s swing logic, rebuilt from the ground up in Pine v6 using the Timebender Rulebook framework for flawless compilation and precision label anchoring. Core Features Dynamic Swing Detection: Detects structural highs/lows using ta.pivothigh() and ta.pivotlow(), confirmed after the selected number of bars (len). Digit Logic (1–9): Converts the pivot candle’s timestamp into a reduced digit from 1–9, acting as a symbolic rhythm marker. Phase-Based Coloring: 1-3 → Accumulation (Gray) 4-6 → Manipulation (Green) 7-9 → Distribution (Blue) Floating or Fixed Labels: Option to keep digits visually anchored above/below candles (yloc.abovebar/belowbar) or locked to price (yloc.price) with customizable ATR offset. Clean Visuals: Transparent background, no boxes, no tooltips — just crisp digits that scale smoothly with zoom. Master Toggle: Instantly hide/show all digits without removing the indicator. Inputs & Customization Show Digits on Chart: Enable/disable plotting. Pivot Length: Number of bars used to confirm swings (default 21). Float Above/Below Bars: Switch between floating or price-anchored mode. ATR Offset Multiplier: Adjust spacing when price-anchored. Digit Size: Tiny → Huge (default Large). Color Controls: Customize the Accumulation, Manipulation, and Distribution color palette. Use Cases Visualize time-based rhythm in market structure. Identify cyclical energy between accumulation, manipulation, and distribution phases. Study how market timing aligns with structural swing formation.
อินดิเคเตอร์ Pine Script®
โดย bon_appetrade
Tight Entry Trend Engine Strategy═══════════════════════════════════════ TIGHT ENTRY TREND ENGINE ═══════════════════════════════════════ A breakout-based trend-following system designed to capture explosive moves by entering at precise resistance/support breakouts with minimal entry risk and massive profit potential. ⚠️ LOW WIN RATE, HIGH REWARD SYSTEM ⚠️ This is NOT a high win-rate strategy. Expect 25-35% winners, but when it hits, winners are typically 10X+ larger than losers. ═══════════════════════════════════════ 🎯 WHAT THIS SYSTEM DOES ═══════════════════════════════════════ The Tight Entry Trend Engine identifies powerful breakout opportunities by detecting when price breaks through established trendlines with confirmation from higher timeframe trends: 1. DYNAMIC TRENDLINE DETECTION (3 BANKS) • Automatically draws support and resistance trendlines • 3 separate "banks" capture short-term, medium-term, and long-term levels • Each bank has configurable parameters (required pivot touch count, angle limits, lengths) 2. BREAKOUT ENTRY TIMING • Enters LONG when price breaks ABOVE resistance trendlines • Enters SHORT when price breaks BELOW support trendlines • Entry Alert occurs at the exact moment of breakout = "tight entry" • Stop-loss placed just below/above the broken trendline (configurable) 3. HIGHER TIMEFRAME TREND FILTER • Uses Hull Moving Average (HMA) on higher timeframe for trend following • Auto-adjusts HTF based on your chart timeframe • Optional filters prevent entries against major trend • Optional "overextension" filter avoids buying parabolic moves 4. VOLATILITY-ADAPTIVE RISK MANAGEMENT • Stop-loss calculated using Average True Range (ATR) • Tighter stops = better R:R • Profit targets adjust dynamically with volatility • Breakeven stop moves automatically when in profit • Extended profit targets when far from HTF trend ═══════════════════════════════════════ 📊 HOW IT WORKS (METHODOLOGY) ═══════════════════════════════════════ STEP 1: TRENDLINE FORMATION The system continuously scans for pivot highs and pivot lows to construct trendlines. You control: BANK 1 (Short-Term): - Pivot Length: How many bars to look back for swing points - Min Touches: How many pivots needed to form a line (default: 3) - Max Length: How far back lines can reach (default: 180 bars) - Angle Limits: Maximum steepness allowed for valid trendlines - Tolerance: How close pivots must align to form horizontal lines BANK 2 (Medium-Term): - Slightly longer pivot periods for more significant levels - Captures medium-term trend structure - Default Max Length: 200 bars BANK 3 (Long-Term): - Focuses on major support/resistance zones - Often uses horizontal levels (angled lines disabled by default) - Default Max Length: 300 bars The system draws RESISTANCE lines (red) above price and SUPPORT lines (green) below price. These adapt in real-time as new pivots form. STEP 2: BREAKOUT DETECTION LONG SIGNALS: - Price closes above a resistance trendline - Higher timeframe trend is up (optional filter) - Price not overextended from HTF trend (optional filter) - No position currently open SHORT SIGNALS: - Price closes below a support trendline - Higher timeframe trend is down (optional filter) - Price not overextended from HTF trend (optional filter) - No position currently open The "tight" aspect: Because you're entering right at the trendline break, your stop-loss can be placed very close (just below the broken resistance for longs), creating exceptional risk/reward ratios. STEP 3: POSITION SIZING Choose between: - Fixed $ Risk Per Trade: Risk same dollar amount every trade - % Risk Per Trade: Risk percentage of current equity Position size automatically calculated based on: - Your risk amount - Distance to stop-loss (ATR-based) - Works with stocks, futures, crypto (auto-adjusts for contract multipliers) STEP 4: EXIT MANAGEMENT Multiple exit methods working together: - PROFIT TARGET: Exits when profit reaches 100x your risk - EXTENDED PROFIT: Earlier exit (80R) when very far from HTF trend - STOP LOSS: Fixed ATR-based stop below entry - HTF TREND EXIT: Exits when price crosses below HTF trend with profit - BREAKEVEN PULLBACK: Exits if profit drops below 0.6R after reaching breakeven - PARTIAL PROFITS: Optional - take partial profits at specified R-multiple ═══════════════════════════════════════ 🔧 KEY COMPONENTS EXPLAINED ═══════════════════════════════════════ HULL MOVING AVERAGE (HMA) A smoothed moving average that reduces lag compared to traditional MAs. The system uses HMA on a higher timeframe to determine the dominant trend direction. You can choose: - Auto HTF: System picks appropriate HTF based on your chart timeframe - Manual HTF: You specify the higher timeframe AVERAGE TRUE RANGE (ATR) Measures current market volatility. Used for: - Stop-loss distance (tighter when volatility low) - Profit targets (larger when volatility high) - Position sizing (smaller positions in volatile conditions) - Breakeven trigger distance TRENDLINE ANGLE FILTERING Each trendline bank has angle limits to ensure quality: - Resistance lines: Max downward/upward slope allowed - Support lines: Max downward/upward slope allowed - Angles automatically adjust based on current volatility - Prevents overly steep/unreliable trendlines SENSITIVITY CONTROL One master slider adjusts multiple parameters: - Trendline detection sensitivity - HTF MA length - Exit timing - Auto-adjusts for daily+ timeframes (60% increase) ═══════════════════════════════════════ ⚙️ WHAT YOU SEE ON YOUR CHART ═══════════════════════════════════════ TRENDLINES: ✓ Red resistance lines above price ✓ Green support lines below price ✓ Orange broken lines (past breakouts) ✓ Lines extend to show current levels HTF TREND: ✓ Thick colored line showing higher timeframe trend ✓ Color gradient: Red (bearish) → Orange → Yellow → Green (bullish) ✓ 250-bar smoothed curve for visual clarity ENTRY/EXIT SIGNALS: ✓ Small green dot below bar = Long entry ✓ Small red dot above bar = Short entry ✓ Small red dot above = Long exit ✓ Small black dot below = Short exit OPTIONAL DETAILED LABELS: ✓ Bank number that triggered entry (Bank 1, 2, or 3) ✓ Exit reason (Profit Target, Stop Loss, HTF Exit, etc.) ✓ Partial profit notifications POSITION TRACKING: ✓ Yellow dashed line at entry price (extends right) ✓ Green/red fill showing current profit/loss zone ✓ Lime arrows at top = Currently in long position ✓ Red arrows at bottom = Currently in short position ✓ Gray background = No position (flat) STATS TABLE (Top Right): ✓ Current position (LONG/SHORT/FLAT) ✓ Risk per trade ($ or %) ✓ Entry price ✓ Unrealized P/L in dollars ✓ P/L in R-multiples (how many R's profit/loss) ✓ Average winner/loser R ($ mode) OR CAGR (% mode) ═══════════════════════════════════════ 📈 OPTIMAL USAGE ═══════════════════════════════════════ BEST ASSETS: - NASDAQ:QQQ on 1-hour (reg) chart ⭐ (PRIMARY OPTIMIZATION) - Strong trending stocks: NVDA, AAPL, TSLA, MSFT, GOOGL, AMZN - High volatility tech stocks - Crypto: BTC, ETH - Any liquid asset with clear trends and momentum (GOLD) AVOID: - Low volatility stocks - Ranging/choppy markets - Penny stocks or illiquid assets - Assets without clear directional movement BEST TIMEFRAMES: - PRIMARY: 1-hour charts (optimal for QQQ) - ALSO EXCELLENT: 2H, 4H, 8H - WORKS: 15min, 30min (only momentum leaders, more noise) - WORKS WITH ADJUSTMENTS: 1D, 2D (decrease trendline pivot lengths) ═══════════════════════════════════════ 📊 BACKTEST RESULTS (QQQ 1H (Reg hours), 1999-2024) ═══════════════════════════════════════ The system showed on NASDAQ:QQQ 1-hour timeframe (regular hours): - Total Return: 1,100,000%+ over 24 years - Total Trades: 500+ - Win Rate: ~20-24% (LOW - this is by design!) - Average Winner: 8-15% gain - Average Loser: 2-4% loss - Win/Loss Ratio: 10:1 (winners much bigger than losers) - Profit Factor: 3+ - Max Drawdown: 45-50% - Risk per trade: 3% of capital KEY INSIGHT: This is a LOW WIN RATE, HIGH REWARD system. You will lose more trades than you win, but the few winners are so large they more than compensate for many small losses. IMPORTANT: These are backtested results using optimal parameters on historical data. Real trading results will vary based on: - Your execution and timing - Slippage and commissions - Your emotional discipline - Market conditions during your trading period ═══════════════════════════════════════ 🎓 WHO IS THIS FOR? ═══════════════════════════════════════ IDEAL FOR: ✓ Swing traders comfortable holding winners for longer period ✓ Part-time traders (1H = check 2-3x per day) ✓ Traders seeking exceptional risk/reward ratios ✓ Those comfortable with low win rates if winners are huge ✓ Technical analysis enthusiasts ✓ Breakout traders ✓ Trend followers ═══════════════════════════════════════ 🚀 GETTING STARTED - STEP BY STEP ═══════════════════════════════════════ STEP 1: APPLY TO YOUR CHART - Search "Tight Entry Trend Engine" in indicators - Click to apply to your chart - Trendlines and HTF line will appear immediately STEP 2: CHOOSE YOUR SETTINGS For BEGINNERS - Use These Settings First: 1. Trade Direction & Filters: • ENABLE LONGS: ✓ ON • ENABLE SHORTS: ✗ OFF (start with longs only) • Sensitivity: 1.0 (default) • HTF Trend Entry Filter: ✓ ON (safer entries) • Block Entries When Overextended: ✓ ON (avoid parabolic tops) 2. Position Sizing & Risk: • Position Sizing: "Per Risk" • RISK Type: "$ Per Trade" • Risk Amount: $200 (or 1-3% of your account) 3. Visual Settings: • Show Support Lines: ✗ OFF (unless trading shorts) • Show Detailed Entry/Exit Labels: ✓ ON • Show Stats Table: ✓ ON • Show Entry Line & P/L Fill: ✓ ON 4. Leave everything else at DEFAULT for now STEP 3: UNDERSTAND WHAT YOU SEE When trendlines appear: - RED lines above = Resistance (watch for price breaking UP through these) - GREEN lines below = Support (watch for price breaking DOWN) - When price breaks a red line = Potential LONG entry - When price breaks a green line = Potential SHORT entry The HTF trend line (thick colored): - Green/lime = Strong uptrend (favorable for longs) - Red = Strong downtrend (favorable for shorts if enabled) - Orange/yellow = Transitioning STEP 4: OBSERVE SIGNALS - Small GREEN dot below bar = System entered LONG - Small RED dot above bar = System exited LONG - Check the label to see which "Bank" triggered (Bank 1, 2, or 3) - Watch the yellow entry line and colored fill show your P/L STEP 5: PAPER TRADE FIRST - Use TradingView's paper trading feature - Watch how signals perform on YOUR chosen asset - Understand the win rate will be LOW (20-35%) - Verify that winners are indeed much larger than losers - Test for at least 20-30 signals before going live STEP 6: OPTIMIZE FOR YOUR ASSET (OPTIONAL) If default settings aren't working well: For FASTER signals (more trades): - Reduce Pivot Length 1 to 3-4 - Reduce Max Length 1 to 120-150 - Increase Sensitivity to 1.2-1.5 For SLOWER signals (higher quality): - Increase Pivot Length 1 to 7-10 - Increase Max Length 1 to 250+ - Decrease Sensitivity to 0.7-0.9 For DAILY timeframes: - Increase all Pivot Lengths by 30-50% - Increase all Max Lengths significantly - Sensitivity: 0.6-0.8 ═══════════════════════════════════════ ⚙️ ADVANCED SETTINGS EXPLAINED ═══════════════════════════════════════ TRENDLINE BANK SETTINGS: Each bank (1, 2, 3) has these parameters: - Min Touches: Minimum pivots to form a line - Lower (2) = More lines, earlier detection - Higher (4+) = Fewer lines, higher quality - Pivot Length: Lookback for swing points - Lower (3-5) = Reacts to recent price action - Higher (10+) = Only major swing points - Max Length: How old a trendline can be - Shorter (100-150) = Only recent lines - Longer (300+) = Include historical levels - Tolerance: Alignment strictness for horizontal lines - Lower (3.0-3.5) = Very strict horizontal - Higher (4.5+) = More forgiving alignment - Allow Angled Lines: Enable diagonal trendlines - ON = Catches sloped support/resistance - OFF = Only horizontal levels - Angle Limits: Maximum steepness allowed - Lower (1-2) = Only gentle slopes - Higher (4-6) = Accept steeper angles - Automatically adjusts for volatility ATR MULTIPLIERS: - STOP LOSS ATR (0.6): Distance to stop-loss - Lower (0.4-0.5) = Tighter stops, stopped out more - Higher (0.8-1.0) = Wider stops, more room - PROFIT TARGET ATR (100): Main profit target - This is 100x your risk = 10,000% R:R - Lower (50-80) = Take profits sooner - Higher (120+) = Let winners run longer - BREAKEVEN ATR (40): When to move stop to breakeven - Lower (20-30) = Protect profits earlier - Higher (60+) = Give more room before protecting HIGHER TIMEFRAME: - Auto HTF: Automatically selects appropriate HTF - 5min chart → uses 2H - 15-30min → uses 6H - 1-4H → uses 2D - Daily → uses 4D - HTF MA Length (300): HMA period for trend - Lower (150-250) = More responsive - Higher (400-500) = Smoother, less whipsaw - HTF Trend Following Exit: Exits when crossing HTF - ON = Additional exit method - OFF = Rely only on profit targets/stops - HTF Trend Entry Filter: Only trade with HTF trend - ON = Safer, fewer signals - OFF = More aggressive, more signals - Block Entries When Overextended: Prevents chasing - ON = Avoids parabolic tops/bottoms - OFF = Enter all breakouts regardless ═══════════════════════════════════════ 💡 TRADING PHILOSOPHY & EXPECTATIONS ═══════════════════════════════════════ This system is built on one core principle: "ACCEPT SMALL, FREQUENT LOSSES TO CAPTURE RARE, MASSIVE WINS" What this means: - You WILL lose 65%-75% of your trades - Most losses will be small (1-2R) - Some winners hit 80R+ - Over time, math works in your favour
กลยุทธ์ Pine Script®
โดย trend-wolf
TF weekly System 1 — Weekly Trend Flip Indicator System 1 (Weekly) is a simple trend-following indicator that uses weekly EMAs with ATR filtering to highlight strong directional shifts. 📈 Uses weekly fast & slow EMAs 🧭 ATR filter removes weak or choppy signals 🟢 Bullish regime = fast EMA above slow + ATR margin 🔴 Bearish regime = fast EMA below slow − ATR margin ⚪ Neutral when neither condition is met Works on any chart timeframe, but signals are based on weekly data Ideal for position traders and longer-term swing trading 💡 Tip: Use this indicator to confirm larger trend direction and combine with lower timeframe strategies for entry timing.
อินดิเคเตอร์ Pine Script®
โดย samgeurts
Final trend following weeklySystem 1 — Weekly Trend Flip Indicator System 1 (Weekly) is a simple trend-following indicator that uses weekly EMAs with ATR filtering to highlight strong directional shifts. 📈 Uses weekly fast & slow EMAs 🧭 ATR filter removes weak or choppy signals 🟢 Bullish regime = fast EMA above slow + ATR margin 🔴 Bearish regime = fast EMA below slow − ATR margin ⚪ Neutral when neither condition is met Works on any chart timeframe, but signals are based on weekly data Ideal for position traders and longer-term swing trading 💡 Tip: Use this indicator to confirm larger trend direction and combine with lower timeframe strategies for entry timing.
อินดิเคเตอร์ Pine Script®
โดย samgeurts