เริ่มกันเลย

อินดิเคเตอร์และกลยุทธ์

Trader Jumblo Apex Pro Signal — Confirmed The Trader Jumblo Apex Signal Pro indicator is a precision-based market reversal tool designed to identify potential turning points in price with a strong confirmation logic. Unlike standard momentum or crossover systems, this tool focuses on confirmed reaction zones, allowing traders to anticipate high-probability shifts in market direction. Built with adaptive multi-filter logic and confirmation weighting, it minimizes false signals and only triggers entries under specific structural conditions. The indicator integrates dynamic volatility levels for automatic stop-loss and take-profit projection using a fixed risk-reward calibration (2:4), maintaining consistency and discipline in trade management. Key Features: • Smart confirmation logic for precision entries • Adaptive 2:4 risk-reward framework • Automatic SL/TP projection • Candle-confirmation filtering for stronger setups • Fully compatible with alerts (BUY, SELL, TP, SL) Best used on: 1-5 minute or 15-minute charts for short-term confirmation trading. ⚠️ Note: This tool is optimized for traders who prioritize precision entries over frequent signals. Each signal represents a confirmed market reaction — not a predictive guess. A precision reversal confirmation system designed to catch high-probability turning points with strict entry logic and fixed 2:4 risk-reward control.
อินดิเคเตอร์ Pine Script®
โดย TraderJumblo
Momentum Flow FusionWhat it is Momentum Flow Fusion is a non-repainting momentum-and-money-flow oscillator designed for crypto but robust across all markets and timeframes. It fuses an original dual-wave momentum engine with a composite money-flow score, adds adaptive bands, and optionally gates entries/exits with higher-timeframe confirmation, trend, VWAP proximity, and session filters. What makes it original Momentum without RSI or WaveTrend clones: The oscillator is built from a detrended price base (TP = H+L+C / 3 minus its EMA). That detrended series is normalized by a rolling z-score and mapped through a logistic function into 0–100. Two independent waves (fast/slow) are derived from this base, producing momentum cross and regime signals without borrowing RSI or open-source WaveTrend code. Composite FlowScore (multi-factor money flow): Four clean-room components are independently normalized to 0–100, then combined with user-set weights: MFI (custom): Typical price × volume flows, accumulated over a window and normalized. CMF: Chaikin-style Close Location Value × volume, then mapped from to . OBV-like: Signed cumulative volume (by close-to-close direction), normalized over a rolling min–max. Signed Delta: Hybrid sign (close-to-close with body fallback), normalized by the rolling sum of absolute deltas (scale-invariant). This produces a single FlowScore suitable for capital-in/out regimes that adapts to asset volatility. Adaptive thresholds everywhere: Both the momentum fast wave and FlowScore are surrounded by dynamic bands using rolling mean ± z·stddev, which adjust automatically across regimes rather than relying on fixed levels. MTF gating on entries and exits: With lookahead_off, the same conditions that qualify a trade on the current timeframe must also be true on a higher timeframe (momentum alignment, FlowScore above/below its mean, and optional EMA trend direction). This reduces false positives and prevents repaint artifacts. Practical risk filters: Optional VWAP distance guard (skip extended entries far from session VWAP) and session/weekend filters to align with your venue’s trading hours. All signals can be confirmed on bar close only to avoid intrabar flicker. How it works (concepts) Momentum Waves (0–100) Base series: z = (TP − EMA(TP, baseLen)) normalized by rolling mean/std. FastWave = EMA(z, fastSmooth), SlowWave = EMA(z, slowSmooth). Logistic mapping: WaveN = 100 · (1 / (1 + e^(−scale · Wave))). Signals: Fast crossing above Slow with Fast above its mean-band suggests positive momentum regime; inverse for negative. FlowScore (0–100, weighted) MFI: Sum of positive/negative money flow (TP×Vol) across mfiLen, normalized to 0–100 by pos / (pos+neg). CMF: CLV = (2C − H − L) / (H − L), volume-weighted over cmfLen; mapped to 0–100. OBV-like: Cumulative sign(volume) by close-to-close direction; normalized over rolling min–max. Delta: Volume times hybrid sign (close-to-close, fallback to body sign); normalized by rolling |delta| sum for robustness. FlowScore = weighted average of the four normalized components with user-defined weights (internally normalized to sum to 1). Adaptive Bands Momentum banding: mean ± z·std of FastWave (0–100). FlowScore banding: mean ± z·std of FlowScore (0–100). Bands are used to frame momentum/flow expansions, pullbacks, and mean reversion. Filters and gating Trend: EMAfast > EMAslow (long) or EMAfast < EMAslow (short) on both current TF and HTF (optional). VWAP guard: Reject entries when |Close−VWAP|/VWAP exceeds a threshold (%). Session: Only allow signals within configured hours; optional weekend filter. Confirm-on-close: All entries/exits can be gated to trigger only on confirmed bars. How to use it Long bias setup: FastWave crosses above SlowWave and remains above it. FlowScore > its mean (or above its upper band for aggressive continuation). Optional: EMAfast > EMAslow (trend), VWAP distance within threshold, MTF gating true on HTF. Entry: On the bar close when conditions align (if confirm-on-close is enabled). Exit: Opposite momentum cross (Fast below Slow), FlowScore falling below mean, or trend flip; exits can also be MTF-gated. Short bias setup: Mirror the long logic. Interpreting FlowScore: Sustained readings above its mean signal net capital inflow; below signal outflow. Use adaptive bands to identify expansion (above upper band), consolidation (inside bands), and reversion (pullbacks to mean). Tuning by market/timeframe: Crypto intraday (scalping): baseLen 21–34, fastSmooth 3–5, slowSmooth 8–12, bandZ 1.2–1.5, mtfTf = 60–240. Swing (any market): baseLen 34–55, fastSmooth 5–8, slowSmooth 14–21, bandZ 1.5–2.0, mtfTf = D or W. Flow weights: Increase wDelta and wOBV for perp-heavy or derivatives-driven markets; increase wMFI and wCMF for spot-dominant venues. Alerts: Enable long/short entry/exit alerts to integrate with automation. For the cleanest behavior, keep confirm-on-close enabled. Why it’s closed-source This script implements an original, clean-room momentum oscillator (detrended price → z-score → logistic 0–100 mapping) and an original composite money flow build (MFI/CMF/OBV-like/Delta individually normalized with robust scalers and weighted into a single FlowScore), plus adaptive banding and strict MTF gating on both entries and exits. It does not reproduce open-source WaveTrend/RSI or imported library logic, and it’s engineered to avoid repainting and reduce overfitting through robust normalization and gating. The protected source preserves these design choices and optimization work. Best practices and tips Always evaluate with confirm-on-close to avoid intrabar noise. Use MTF gating in trending environments; consider disabling in very low timeframe scalps where responsiveness is critical. If you get too few signals, reduce bandZ and/or relax the trend/VWAP filters; if too many, raise bandZ and/or tighten the VWAP threshold. Keep weights simple (e.g., 0.4/0.3/0.2/0.1) and adjust slowly. Over-tuning weights to a single asset/timeframe can reduce generalization. Limitations Volume-derived components can behave differently across venues (spot vs derivatives); re-tune weights accordingly. Extremely illiquid symbols or gaps may distort rolling normalizations; widen windows or rely more on momentum waves in those cases.
อินดิเคเตอร์ Pine Script®
โดย starseedmaster1
Elite Entries Pivot Banker PremiumElite Entries Pivot Banker — Breakout Buffer, Zones & TSL What it does **Elite Entries Pivot Banker** is a trend-following entry tool that: 1. Finds fresh **support/resistance pivots** using a configurable lookback. 2. Triggers **buy/sell** only when price **closes beyond** the pivot by a user-defined **Breakout Buffer** (ATR/%, or ticks). 3. Optionally **stamps a zone** from the **previous candle** (wick or body) so you can see the supply/demand area that produced the signal. 4. Manages positions with a **Trailing Stop (TSL)** (ATR/%, or points), including optional **auto break-even after +1R**. It’s designed to cut “touch & reverse” fakes, visualize the origin zone, and keep risk management systematic. --- How to use (quick start) 1. **Add to chart.** Works on regular or Heikin Ashi; the script uses “real” OHLC internally for entries/exits. 2. **Set Lookback (`length`).** * Intraday: start at **150** (range: 100–200). * Swing: start at **200** (range: 150–300). 3. **Choose Threshold Mode & Value.** * *Percent* (default): common range **0.3–0.8%**. * *Points*: handy for futures/indices if you think in points. This defines how far from the pivot a candle must be before it’s even eligible to signal. 4. **Turn on the Breakout Buffer.** * Keep **Require Breakout Close Beyond Pivot** ON. * **ATR** buffer with **0.25–0.50** is a strong baseline; increase on choppy symbols. * For slower charts or FX, try **Percent** (e.g., 0.10–0.25). 5. **Enable Zones (optional).** * **Wick** zones are broader (more forgiving); **Body** zones are tighter (surgical). * Use **Delete Zone When Broken** to auto-clean the chart. * **Use Wick for Zone Break** if you want stricter invalidation (wick penetration kills the zone). 6. **Configure the Trailing Stop (TSL).** * **ATR 14**, **2.0×** (Long/Short) is a classic start. * Turn on **Auto Break-even after +1R** to protect gains on momentum pushes. 7. **Trade the signals.** * **Green triangle** below bar = *Buy*. * **Red triangle** above bar = *Sell*. * If **Show BLOCKED** is enabled, “X” markers show signals that were suppressed only because a TSL trade is already active (to prevent stacking). * **TSL line** (lime for long, red for short) shows your trailing stop; touching it exits (optional exit label shows PnL). --- Inputs (plain-English guide) Pivot Settings * **Support/Resistance Lookback** — how far back to define pivots. Larger = fewer but stronger pivots. * **Track Price** — keeps pivot plots tracking live price. Signal Settings * **Threshold Mode / Value** — minimum distance from pivot before a bar can even qualify. * **Show BLOCKED markers** — visualizes otherwise-valid signals blocked by an active TSL position. * **Signal Label Size** — shape size for the triangles. External Filters (optional) * **Use External Enhancers** — require pivot to be Above/Below a custom series (e.g., MA, HTF close). Useful if you want signals only in the higher-timeframe trend. Breakout Buffer (the key filter) * **Require Breakout Close Beyond Pivot** — ON to reduce false breaks. * **Buffer Mode** — ATR / Percent / Ticks. * **Buffer Amount** — the distance that close must exceed the pivot. Signal Zones * **Create Zone After Signal** — draw a box from the **previous candle** (wick/body). * **Opacity / Extend Right** — cosmetic and readability controls. * **Delete Zone When Broken** — auto-remove once invalid. * **Use Wick for Zone Break** — stricter (wick) vs. lenient (close) break logic. * **Max Zones to Keep** — cap to avoid chart bloat during long replays. Trailing Stop * **Mode** — ATR / Percent / Points. * **ATR Length / Multipliers** — classic 14 / 2.0× each side. * **Percent / Points Trail** — alternatives to ATR. * **Auto Break-even after +1R** — locks stop to entry once move equals the trail distance. * **Show TSL Lines / Exit Labels / Risk Label at Start** — visibility + readouts. * **PnL Display** — Currency / Points / Ticks. * **Label styling & persistence** — pick sizes/colors and whether risk labels persist after exit. --- Suggested presets **Intraday baseline (indices, liquid stocks)** * Lookback: **150** * Threshold: **0.5%** (or 1.0 point on ES/points mode) * Breakout Buffer: **ATR**, **0.35** * TSL: ATR **14**, **2.0×** (both sides), Break-even **ON** * Zones: **Wick**, Delete on Break **ON**, Wick-Break **OFF** **Swing baseline (daily/4H)** * Lookback: **200** * Threshold: **0.5–0.8%** * Breakout Buffer: **ATR**, **0.25–0.35** * TSL: ATR **14**, **2.0×**, Break-even **ON** * Zones: **Body** for cleaner structure, Delete on Break **ON** --- Reading the chart * **Triangles**: entries (green = buy, red = sell). * **TSL lines**: dynamic stops (lime/red). * **Exit labels**: optional PnL marker when stop is hit. * **Zones**: shaded boxes from the *previous candle* that created the signal; auto-extend and optionally auto-delete. --- Alerts included * **Basic Buy Alert** — on confirmed buy signal. * **Basic Sell Alert** — on confirmed sell signal. * **TSL Exit (Long/Short)** — when trailing stop is touched. --- Tips & troubleshooting * Too many fakeouts? → Increase **Breakout Buffer** (e.g., ATR 0.35→0.50) or raise **Lookback**. * Late entries? → Reduce **Threshold** and/or **Breakout Buffer** slightly. * Want fewer overlapping trades? → Keep **TSL gate** ON (default behavior) so new signals are blocked while in a position. * Zone clutter? → Lower **Max Zones to Keep** or enable **Delete Zone When Broken**. --- ## Notes & disclaimer * This is a **research/education** tool. Always forward-test and risk-manage. * For backtests, consider a **strategy** version that mirrors these entries and TSL exits (I can provide one if you want).
อินดิเคเตอร์ Pine Script®
โดย MooreMuzik
Sri Momentum Plus - CTF with adjustable hilineSri Momentum Plus – CTF with Adjustable Hiline Sri Momentum Plus is a refined, multi-timeframe momentum analyzer designed to visualize trend strength and reversals with precision. This tool is an enhanced version of traditional momentum oscillators, incorporating custom timeframe control, dynamic sensitivity, and a user-adjustable baseline (hiline) for flexible visualization and alignment with different trading strategies. ⚙️ Key Features Custom Timeframe (CTF): Analyze momentum from any selected timeframe (from 1-minute to Monthly), independent of the chart’s current timeframe. Adjustable Hiline (Base Offset): Shift the entire momentum structure up or down around your preferred base level. Ideal for aligning multiple indicators or customizing visual zones (e.g., -110, -50, or 0). Dual Momentum Calculation: Uses a blend of fast and slow moving averages to capture both short-term bursts and long-term shifts in momentum. Normalization Options: Choose between Volatility-based or Price-average-based normalization to adapt the indicator’s sensitivity to different market conditions. Smart Coloring: Four-color histogram distinguishes between bullish, bearish, and transitional phases — allowing you to visually detect momentum strength and reversals at a glance. Signal Line Integration: Smooths raw momentum into a clear signal line for trend confirmation and cross-over recognition. 🧩 User Controls Timeframe Selection: Select any timeframe for the momentum calculation, independent of the chart. Sensitivity: Fine-tune how strongly the indicator reacts to price movements. Fast/Slow/Signal Periods: Adjust each period length for faster or slower response. Normalization Method: Choose how momentum is scaled — either by volatility or by average price. Hiline (Base Offset): Move the baseline up or down to align the indicator with your layout or trading framework. 📊 How to Use Use histogram color changes and signal line crossovers to identify potential trend shifts. Adjust the hiline to align with your preferred visual setup or to stack this indicator with other tools. Works well in combination with volume, trend, or oscillator-based indicators for enhanced decision-making. 💡 Best For Traders who use momentum-based strategies (swing, intraday, or positional). Those who prefer custom multi-timeframe analysis to confirm higher-timeframe momentum. Users seeking visual flexibility and clean separation of bullish/bearish momentum phases.
อินดิเคเตอร์ Pine Script®
โดย venkat_27
Index of Civilization DevelopmentIndex of Civilization Development Indicator This Pine Script (version 6) creates a custom technical indicator for TradingView, titled Index of Civilization Development. It generates a composite index by averaging normalized stock market performances from a selection of global country indices. The normalization is relative to each index's 100-period simple moving average (SMA), scaled to a percentage (100% baseline). This allows for a comparable "development" or performance metric across diverse markets, potentially highlighting trends in global economic or "civilizational" progress based on equity markets.The indicator plots as a single line in a separate pane (non-overlay) and is designed to handle up to 40 symbols to respect TradingView's request.security() call limits.Key FeaturesComposite Index Calculation: Fetches the previous bar's close (close ) and its 100-period SMA for each selected symbol. Normalizes each: (close / SMA(100)) * 100. Averages the valid normalizations (ignores invalid/NA data) to produce a single "Index (%)" value. Symbol Selection Modes:Top N Countries: Selects from a predefined list of the top 50 global stock indices (by market cap/importance, e.g., SPX for USA, SHCOMP for China). Options: Top 5, 15, 25, or 50. Democratic Countries: ~38 symbols from democracies (e.g., SPX, NI225, NIFTY; based on democracy indices ≥6/10, including flawed/parliamentary systems). Dictatorships: ~12 symbols from authoritarian/hybrid regimes (e.g., SHCOMP, TASI, IMOEX; scores <6/10). Customization:Line color (default: blue). Line width (1-5, default: 2). Line style: Solid line (default), Stepline, or Circles. Data Handling:Uses request.security() with lookahead enabled for real-time accuracy, gaps off, and invalid symbol ignoring. Runs calculations on every bar, with max_bars_back=2000 for historical depth. Arrays are populated only on the first bar (barstate.isfirst) for efficiency. Predefined Symbol Lists (Examples)Top 50: SPX (USA), SHCOMP (China), NI225 (Japan), ..., BAX (Bahrain). Democratic: Focuses on free-market democracies like USA, Japan, UK, Canada, EU nations, Australia, etc. Dictatorships: Authoritarian markets like China, Saudi Arabia, Russia, Turkey, etc. Usage TipsAdd to any chart (e.g., daily/weekly timeframe) to view the composite line. Ideal for macro analysis: Compare democratic vs. authoritarian performance, or track "top world" equity health. Potential Limitations: Relies on TradingView's symbol availability; some exotic indices (e.g., KWSEIDX) may fail if not supported. The 40-symbol cap prevents errors. Interpretation: Values >100 indicate above-trend performance; <100 suggest underperformance relative to recent averages. This script blends financial data with geopolitical categorization for a unique "civilization index" perspective on global markets. For modifications, ensure symbol tickers match TradingView's format.
อินดิเคเตอร์ Pine Script®
โดย iCD_creator
CPR+PIVOT+HL+EMA_ by Jit'sThe **CPR+PIVOT+HL+EMA_ by Jit's** is a custom Trading View indicator designed especially for **index intraday trading** (like NIFTY, BANKNIFTY, and FINNIFTY). It integrates four powerful analytical components—Central Pivot Range (CPR), Pivot Points, Previous Day High/Low, and 9/15 Exponential Moving Averages (EMA)—to provide traders a comprehensive market structure and trend confirmation tool. Core Components **1. Central Pivot Range (CPR)** The CPR forms the central structure of this indicator. It is derived from the previous day’s **high, low, and close** values: - Pivot (P) = (H + L + C) / 3 - Bottom Central (BC) = (H + L) / 2 - Top Central (TC) = (P - BC) + P These three levels together represent the market’s “value area.” A **narrow CPR** suggests a potential trending day ahead, while a **wide CPR** indicates likely consolidation. **2. Pivot Points & Support/Resistance Levels** The indicator extends beyond CPR by adding **traditional or Fibonacci pivots**, dynamically plotting resistance (R1–R5) and support (S1–S5) zones. These levels assist in spotting breakout levels and intraday reversal zones. **3. Previous Day High and Low (PDH/PDL)** These levels are essential for understanding market context. When price stays **above PDH**, it often signals strong bullish momentum; breaking **below PDL** indicates bearish pressure. Many traders use PDH/PDL along with CPR as key validation points for entries or exits. **4. EMA (9 and 15 periods)** The moving averages provide short-term trend confirmation. - **EMA(9)** captures immediate momentum. - **EMA(15)** represents short-term trend alignment. A crossover of EMA(9) above EMA(15) usually supports a **buy signal**, while the opposite indicates a sell bias. Use Case in Index Trading This indicator setup is highly suited for **index-based intraday trading** because: - CPR gives a bias for the day (bullish/bearish). - PDH/PDL exhibit clear breakout or reversal areas. - EMAs refine timing for entry/exit. - Pivot levels mark precise target and stop zones.
อินดิเคเตอร์ Pine Script®
โดย tv714445
Medium-Term Valuation | MiesOnChartsThis medium-term valuation indicator integrates multiple valuation metrics to assist investors in identifying oversold and overbought market conditions with greater precision. How to Interpret: The indicator employs adaptive standard deviation bands to define extreme market zones. The red band signals a strongly overbought condition, while the green band indicates a significantly oversold condition. How to Apply: Investors can leverage these extreme levels as strategic points for taking profits or implementing dollar-cost averaging (DCA) strategies, optimizing entry and exit decisions in the market. Disclaimer: NOT Financial advice. Past performance is not indicative of future results. No trading strategy can guarantee success in financial markets.
อินดิเคเตอร์ Pine Script®
โดย MiesOnCharts
X-GoldThis indicator visualizes the relationship between Gold’s global strength and the U.S. Dollar Index (DXY) to help traders identify periods of confluence or divergence between the two assets. It combines: # Gold Spread Index (GSI) – the average normalized value of XAU quoted against several major currencies (USD, AUD, CHF, EUR, GBP, and Silver). This helps measure gold’s strength across global markets, not just against the U.S. dollar. # Normalized DXY line – a z-scored and smoothed version of the U.S. Dollar Index for visual comparison. The background highlights confluence zones: 🟢 Bullish Confluence – GSI trending up while DXY trends down 🔴 Bearish Confluence – GSI trending down while DXY trends up ⚫ Neutral / Divergence – both move in the same direction (often signals indecision or ranging conditions) Key Features: # Works on any timeframe # Real-time background color zones for instant trend confluence visualization # Optional alerts for buy/sell/neutral confluence transitions # Clean layout in a separate panel for clear comparison Disclaimer: This script is for educational and analytical purposes only. It does not provide financial advice or guarantee any trading outcomes. Always perform your own analysis before making investment decisions.
อินดิเคเตอร์ Pine Script®
โดย ling7777
Friday’s Close – Futures Weekend AnchorPurpose: This indicator highlights the US futures weekend close price — the exact level where CME markets end trading on Friday at 4:00 PM CT / 5:00 PM ET. It’s designed primarily for crypto traders who want to compare weekend market behavior to the traditional finance (TradFi) close. Why it matters: Crypto trades 24/7, but global liquidity and sentiment still pivot around the Friday futures close. During the weekend, crypto can “drift” relative to traditional markets — this line shows exactly where the week ended for Wall Street, giving you a clean reference point until futures reopen on Sunday evening. Features Precise Friday close capture (CME weekend close minute, not just daily bar) Works on any ticker — especially useful for BTC, ETH, or other crypto assets Adjustable for time zone (New York / Chicago / custom) Option to select prior weeks with weekOffset Draws a single clean line from Friday’s close forward — no clutter, no vertical stitches Optional right-edge label with the close value and timestamp Usage Tips Keep the chart’s timezone in sync with your anchor (America/New_York = 5 PM ET, America/Chicago = 4 PM CT). Use weekOffset = 1 to view last week’s Friday close. Combine with volume, funding, or open interest indicators to see how weekend moves relate to the TradFi close. Ideal for weekend analysis — shows whether crypto is trading rich or cheap vs. the Friday benchmark before futures reopen. Recommended For Crypto traders, analysts, and quant enthusiasts who monitor TradFi–crypto decoupling or weekend premium behavior.
อินดิเคเตอร์ Pine Script®
โดย GeoffGolder
XqKtPvRwSd-StrategyTradingView Pine Script Suite (v4.0) — General Overview Purpose A modular indicator and strategy suite designed for crypto markets, focusing on trend detection, momentum, range visualization, and signal generation. The suite supports popular symbols (BTC, ETH, BNB, SOL, DOGE) and offers flexible visualization and alert options. Main Components - v4.0-indicator: Multi-signal display for monitoring market conditions and trend bias. - v4.0-watch-15m: Watchlist-style indicator with symbol-aware auto-tuning and optional chart timeframe adaptation. - v4.0-strategy: Backtestable strategy using a unified, SuperTrend-based trend determination for entries/exits. - v4.0-range: Range and structure visualization with dynamic lines, zones, and basic breakout cues. - Two Poles.pinescript and fengzi/Two Poles Trend: Low-lag trend and smoothing filters for stability. - supertrend.pinescript: SuperTrend variations used across the suite for direction and stops. - fengzi utilities: - Hann Window FIR Filter: Denoising and smoothing to reduce noise without excessive lag. - Heatmap + Hann Resonance: Visual heat/energy mapping for momentum and resonance cues. - Heatmap Trailing Stop with Breakouts: Trailing stop framework with breakout detection. - Additional modules: super Z, AI JX, v3.2, and 4.0.pinescript (combined or experimental entries). Key Features - Unified Trend Logic: Strategy and visual components rely on a consistent SuperTrend-based direction model, improving clarity and consistency. - Adaptive Timeframe: Option to use the chart’s timeframe; parameters scale from a 15m baseline to maintain relative behavior. - Symbol Auto-Tuning: Default parameter sets are tailored for common crypto symbols; manual overrides are available. - RSI Top/Bottom Hints: Optional dynamic cues for potential peaks in uptrends and troughs in downtrends; can contribute to scoring and alerts. - Visual Customization: Configurable markers (arrows, dots, crosses), colors, line widths, and subtle background highlighting. - Scoring and Clustering: Combines checks into a simplified score and clusters signals to reduce noise. - Alerts: Supports TradingView alerts for entries, exits, and RSI hints. - Compatibility: Designed to compile across common Pine versions and avoid local-scope plotting issues. Basic Usage - Add the indicator or strategy to your chart depending on your goal (monitoring vs. backtesting). - Choose to follow the chart’s timeframe or set a working timeframe manually. - Keep symbol auto-tuning enabled for a balanced default, or adjust parameters to match your preferences. - Toggle optional modules (RSI hints, scoring contribution, visualization) based on your needs. - For strategies, run backtests across your target period and review performance metrics (win rate, drawdown, and trade frequency). Configuration Guidelines - For earlier entries: lower SuperTrend period or multiplier; relax RSI thresholds. - For more conservative behavior: increase SuperTrend period or multiplier; tighten thresholds; use stricter RSI logic. - For cleaner signals: rely on the unified trend and consider limiting trades during extreme volatility or illiquid sessions. Outputs - Trend markers and lines indicating bullish/bearish bias and reversals. - Range drawings with dynamic line coordinates, zones, and visual cues for consolidations and breakouts. - Optional multi-timeframe dashboard-style summaries where applicable. Extensibility - Parameters and defaults can be extended for additional symbols and styles. - Optional weighting or neutrality rules can be added to trend logic if you prefer stricter confirmation. - Additional filters (volatility, session, volume) can be integrated to refine entries and exits. Notes - Not financial advice; backtest thoroughly before using any strategy live. - Performance and signal quality vary by symbol, timeframe, and market conditions; adjust parameters as needed. - Pine version differences may require minor adjustments; keep your environment up to date.
กลยุทธ์ Pine Script®
โดย taozitong
OSOK AMERICANA [TakingProphets]OVERVIEW OSOK is an ICT-inspired execution framework designed to help traders map the interaction between Higher-Timeframe (HTF) liquidity sweeps, qualifying Order Blocks, and Current-Timeframe (CTF) confirmation signals — all within a single, structured workflow. By sequencing an HTF CRT → Order Block → CTF CRT model and integrating IPDA 20 equilibrium context, this tool provides traders with a visual framework for aligning intraday execution decisions with higher-timeframe intent. All plotted elements — sweeps, blocks, open prices, and equilibrium levels — update continuously in real time. ----------------------------------------------------------------------------------------------- Core Concepts (ICT-Based) ----------------------------------------------------------------------------------------------- Candle Range Transition (CRT) Sweeps Bullish CRT → The second candle runs below the first candle’s low and closes back inside its range. Bearish CRT → The second candle runs above the first candle’s high and closes back inside its range. These patterns are frequently associated with liquidity grabs and potential directional shifts. HTF → CTF Alignment -Detects valid HTF CRTs (e.g., Daily CRTs derived from H4 or Weekly CRTs derived from Daily). -Locates a qualifying Order Block within HTF Candle-2 to identify areas of potential interest. -Waits for a modified CRT confirmation on the current timeframe before signaling possible directional bias. IPDA 20 Equilibrium -Plots the midpoint of the daily highest and lowest prices over the last 20 periods. -Provides a visual reference for premium and discount pricing zones. ----------------------------------------------------------------------------------------------- How OSOK Works ----------------------------------------------------------------------------------------------- Step 1 — HTF CRT Check On each new HTF candle, the script scans for a clean CRT formation on the higher aggregation (e.g., H4 → D or D → W). If found, it tags the candles as C1, C2, and C3 and optionally shades their backgrounds for clear visual parsing. Step 2 — HTF Order Block Identification Searches within HTF Candle-2 for a qualifying Order Block using a compact pattern filter. Draws a persistent OB level with clear labeling for context. Step 3 — CTF Confirmation (Modified CRT) Monitors your current chart timeframe for a modified CRT in alignment with the HTF setup: For bullish setups → waits for a bullish modified CRT and close above C1’s high zone. For bearish setups → expects a bearish modified CRT and close below C1’s low zone. Step 4 — Real-Time Maintenance All labels, lines, and background spans update intrabar. If the setup invalidates — for example, if implied targets are exceeded before entry — the layout resets and waits for the next valid sequence. ----------------------------------------------------------------------------------------------- KEY FEATURES ----------------------------------------------------------------------------------------------- HTF CRT Visualization -Optional “×” markers on Daily/Weekly CRT sweeps. -Independent background shading for C1, C2, and C3. Order Block + Open Price Context -Draws HTF Order Block levels and plots C3 Open Price (DOP) for additional directional reference. CTF CRT Execution Cue -Displays a modified CRT on your current timeframe when conditions align with the HTF narrative. IPDA 20 Line + Label -Plots a dynamic midpoint level with an optional label for quick premium/discount context. Optimized Drawing Engine -Lightweight, efficient use of chart objects ensures smooth performance without visual clutter. INPUTS -Higher Timeframe Settings -Toggle markers for Daily/Weekly CRT sweeps. -Enable and color C1, C2, and C3 background spans. -IPDA Display Options -Control visibility, color, and line style for IPDA 20 equilibrium levels. -Sweep, OB, and Open Price Styles -Per-element customization for colors, widths, and labels. ----------------------------------------------------------------------------------------------- BEST PRACTICES ----------------------------------------------------------------------------------------------- Start on H4 or Daily to identify valid HTF CRT formations. Confirm a qualifying OB inside Candle-2. Drop to your execution timeframe and wait for the modified CTF CRT confirmation before acting. Use IPDA 20 equilibrium as a reference for premium vs. discount zones. Combine with your ICT session bias and overall market context for optimal decision-making. ----------------------------------------------------------------------------------------------- Important Notes ----------------------------------------------------------------------------------------------- OSOK is not a buy/sell signal provider. It’s a visual framework for understanding ICT-based execution models. All objects reset automatically when new HTF candles form or setups invalidate. Works on any symbol and timeframe by default, with HTF mapping set to H4 → D and D → W.
อินดิเคเตอร์ Pine Script®
โดย TakingProphets
ACE哥專屬指標這是一款專為加密貨幣與外匯市場設計的多空結構分析指標。 指標核心結合了市場結構、K線反轉訊號、均線節奏與關鍵支撐壓力區間偵測， 可協助交易者在趨勢盤與震盪盤中找到相對安全的進出場點位。 本指標可應用於波段、日內與短線操作，能清楚標示多空轉折區間、結構突破與回測確認點， 特別適合搭配結構延續策略、支撐壓力策略或結構轉換策略使用。 若有興趣了解更多策略應用與交易邏輯，歡迎透過官方社群或課程進一步學習。 This is a long-short structure analysis indicator designed specifically for the cryptocurrency and forex markets. The core of the indicator combines market structure, candlestick reversal signals, moving average rhythm, and key support and resistance zone detection to help traders identify relatively safe entry and exit points in trending and volatile markets. This indicator can be used for swing, intraday, and short-term trading. It clearly identifies long-short turning points, structural breakouts, and backtest confirmation points. It is particularly suitable for use with structural continuation strategies, support and resistance strategies, or structural conversion strategies. If you are interested in learning more about strategy applications and trading logic, please learn more through the official community or courses.
อินดิเคเตอร์ Pine Script®
โดย micolo2100
EGBRisk v1.1011. **Identifies 8 types of bullish engulfing patterns**: - 7 standard EGB types (1️–7️) with different formation conditions (e.g., exact price matches, candle wicks, relative body sizes, etc.). - One special **EGBRisk** type — a more aggressive but flexible engulfing variant. 2. **Works across multiple timeframes simultaneously**: - Detects patterns on three user-defined timeframes (e.g., 30m, 15m, 5m). - Optionally checks for **price zone overlap** between timeframes. 3. **Tracks post-pattern price behavior**: - Detects **downside breakouts** (considered pattern failure — objects are removed). - Marks **retests** of the custom level. - Supports **history mode** to view older patterns. 4. **Additional features**: - Optional **info panel** showing counts of each pattern type. - **"Perfect Mode"** for stricter price-matching conditions. - Customizable line styles, colors, delays, and tolerance settings.
อินดิเคเตอร์ Pine Script®
โดย ascnd
Sessions - [CLEAN SESSION LEVELS UPDATED 2.0 ]s indicator automatically plots high and low levels for all major trading sessions — Asia, London, and New York — helping traders identify key liquidity zones and structure points throughout the day. Designed for precision and clarity, it adapts seamlessly across timeframes and pairs, making it ideal for session-based strategies, sweep setups, and intraday market structure analysis.
อินดิเคเตอร์ Pine Script®
โดย spyput
Harmonic Patterns Pro 1.0 [abusuhil]# Harmonic Patterns Pro 1.0 ## 📊 Professional Harmonic Pattern Detector - All 10 Classical Models **Harmonic Patterns Pro** is a comprehensive, non-repainting indicator that automatically detects and displays all 10 classical harmonic patterns in real-time. Built with precision and professional traders in mind, this indicator helps you identify high-probability reversal zones based on Fibonacci ratios. --- ## ✨ Key Features ### 🎯 10 Harmonic Patterns Supported - **Gartley** - The most common harmonic pattern - **Bat** - High accuracy with tight stop loss - **Butterfly** - Extended pattern with strong reversal potential - **Crab** - Extreme extension pattern (1.618 XA) - **Deep Crab** - Deeper B retracement variant - **Shark** - Unique C point extension pattern - **Cypher** - C extends beyond A, tight stop loss - **AB=CD** - Simple equal-leg pattern - **Alternate Bat** - Bat variation with D beyond X - **Three Drives** - Three equal impulse moves ### 🔒 100% Non-Repainting - Patterns are drawn **only after completion** (candle close) - Once drawn, patterns **stay permanently** on the chart - No future data used - completely reliable for live trading - What you see in history is what you get in real-time ### 🎚️ 5 Sensitivity Levels Choose the detection accuracy that fits your trading style: - **Strict (±2%)** - Highest accuracy, fewer signals - **Medium-Strict (±5%)** - Good balance - **Medium (±8%)** - Recommended for most traders - **Medium-Loose (±12%)** - More patterns detected - **Loose (±18%)** - Maximum pattern detection ### 🎨 Advanced Visual Design - **PRZ Zone**: Automatic Potential Reversal Zone highlighting - **Pattern Fill**: Shaded area between pattern lines for clarity - **XABCD Points**: Clear labeling of all pivot points - **Color Coded**: Green for bullish, red for bearish patterns - **Customizable**: Adjust colors, opacity, line styles, label sizes ### 📈 Complete Trading System - **Entry Signals**: Clear BUY/SELL labels at point D - **3 Profit Targets**: TP1 (38.2%), TP2 (61.8%), TP3 (100% CD) - **Stop Loss**: Automatically calculated and displayed - **Entry Timing**: Option to enter at D or next candle - **Pattern Names**: Each pattern labeled (e.g., "Bullish Bat") ### 🧹 Simplified Mode - Toggle to hide all decorations - Shows only: BUY/SELL signals, targets, and stop loss - Perfect for experienced traders who want a clean chart ### 🚫 Anti-Overlap System - **Minimum Bars Between Patterns** setting - Prevents cluttered charts with overlapping patterns - Ensures only the most recent, valid patterns are displayed - Adjustable from 5 to 50 bars ### 🔔 Smart Alert System - **3 Alert Types**: Buy Signal, Sell Signal, Any Signal - **Signal Tester Compatible**: Works with backtesting tools - **alertcondition()** method for TradingView alerts - Get notified immediately when patterns complete --- ## 🚀 Quick Start Guide ### Recommended Settings (Beginners) ``` ZigZag Length: 12 Sensitivity: Medium PRZ Opacity: 40 Fill Opacity: 30 Entry on Next Candle: false Simplified Mode: false Min Bars Between Patterns: 15 ``` ### For Live Trading ``` Entry on Next Candle: true ← Important! ``` ### For Clean Charts ``` Simplified Mode: true ``` --- ## 📊 Best Practices ### Timeframes - **Best**: 4H, Daily, Weekly - **Good**: 1H, 2H - **Acceptable**: 15m, 30m ### Markets Works on **all markets**: Forex, Stocks, Crypto, Commodities, Indices ### Risk Management - Risk per trade: 1-2% of account - Stop Loss: Use indicator's calculated SL - Profit Targets: Scale out at TP1, TP2, TP3 - Minimum R:R: 1:2 --- ## 🎓 Trading Strategies ### Strategy 1: Conservative - Sensitivity: Strict - Entry on Next Candle: true - Confirm with RSI/MACD ### Strategy 2: Aggressive - Sensitivity: Medium-Loose - Quick entry and exit - Scale out at TP1, TP2 ### Strategy 3: Swing Trading - Sensitivity: Strict - Timeframe: 4H, Daily - Hold to TP3 ### Strategy 4: Multi-Timeframe - Identify pattern on higher timeframe - Enter on lower timeframe pattern --- ## 🔔 Setting Up Alerts 1. Right-click on chart → **"Add Alert"** 2. Condition → **"Harmonic Patterns Pro 1.0 "** 3. Choose: Buy Signal / Sell Signal / Any Signal 4. Click **"Create"** --- ## ❓ FAQ **Q: Does this indicator repaint?** A: No. 100% non-repainting. **Q: What's the best sensitivity setting?** A: Start with "Medium". **Q: How many patterns should I expect?** A: Daily: 1-3/month. 1H: 5-10/week. **Q: Can I use this for backtesting?** A: Yes! Compatible with Signal Tester. **Q: Should I trade every pattern?** A: No. Focus on quality setups. **Q: What's the typical win rate?** A: Beginners: 40-50%, Advanced: 65-75%. --- ## 🎯 Why Choose This Indicator? ✅ **Comprehensive** - All 10 patterns in one ✅ **Reliable** - 100% non-repainting ✅ **Professional** - Clean, customizable design ✅ **Complete** - Entry, targets, stop loss included ✅ **User-Friendly** - Easy to use ✅ **Flexible** - Works on all markets and timeframes --- ## ⚠️ Disclaimer This indicator is a tool for technical analysis and should not be considered financial advice. Trading involves substantial risk of loss. Always use proper risk management and never risk more than you can afford to lose. --- ## 🏆 Final Words **Harmonic Patterns Pro 1.0** combines classical harmonic pattern theory with modern automation. Start identifying high-probability reversal zones today! **Version**: 1.0 | **Author**: | **Last Updated**: October 2025 **Happy Trading! 📊✨** --- --- --- # ═══════════════════════════════════════════════════════════ # 🌟 النسخة العربية | ARABIC VERSION 🌟 # ═══════════════════════════════════════════════════════════ --- --- --- # مؤشر نماذج الهارمونيك الاحترافي 1.0 ## 📊 كاشف احترافي لنماذج الهارمونيك - جميع النماذج العشرة الكلاسيكية **مؤشر نماذج الهارمونيك الاحترافي** هو مؤشر شامل وغير معاد الرسم يكتشف ويعرض تلقائياً جميع نماذج الهارمونيك الكلاسيكية العشرة في الوقت الفعلي. تم بناؤه بدقة ومع وضع المتداولين المحترفين في الاعتبار، يساعدك هذا المؤشر على تحديد مناطق الانعكاس عالية الاحتمالية بناءً على نسب فيبوناتشي. --- ## ✨ الميزات الرئيسية ### 🎯 دعم 10 نماذج هارمونيك - **Gartley (جارتلي)** - النموذج الأكثر شيوعاً - **Bat (الخفاش)** - دقة عالية مع وقف خسارة ضيق - **Butterfly (الفراشة)** - نموذج ممتد مع إمكانية انعكاس قوية - **Crab (السلطعون)** - نموذج امتداد متطرف (1.618 XA) - **Deep Crab (السلطعون العميق)** - نسخة أعمق من السلطعون - **Shark (القرش)** - نموذج فريد بامتداد النقطة C - **Cypher (السايفر)** - C تمتد بعد A، وقف خسارة ضيق - **AB=CD** - نموذج بسيط بأرجل متساوية - **Alternate Bat (الخفاش البديل)** - نسخة من الخفاش مع D بعد X - **Three Drives (الدفعات الثلاث)** - ثلاث حركات دفع متساوية ### 🔒 عدم إعادة الرسم 100% - يتم رسم النماذج **فقط بعد الاكتمال** (إغلاق الشمعة) - بمجرد الرسم، تبقى النماذج **بشكل دائم** على الشارت - لا يتم استخدام بيانات مستقبلية - موثوق تماماً للتداول المباشر - ما تراه في التاريخ هو ما تحصل عليه في الوقت الفعلي ### 🎚️ 5 مستويات حساسية اختر دقة الكشف التي تناسب أسلوب التداول الخاص بك: - **Strict (صارم ±2%)** - أعلى دقة، إشارات أقل - **Medium-Strict (متوسط-صارم ±5%)** - توازن جيد - **Medium (متوسط ±8%)** - موصى به لمعظم المتداولين - **Medium-Loose (متوسط-مرن ±12%)** - اكتشاف المزيد من النماذج - **Loose (مرن ±18%)** - أقصى اكتشاف للنماذج ### 🎨 تصميم مرئي متقدم - **منطقة PRZ**: تمييز تلقائي لمنطقة الانعكاس المحتملة - **تظليل النموذج**: منطقة مظللة بين خطوط النموذج للوضوح - **نقاط XABCD**: تسمية واضحة لجميع نقاط المحور - **ترميز لوني**: أخضر للنماذج الصاعدة، أحمر للنماذج الهابطة - **قابل للتخصيص**: ضبط الألوان، الشفافية، أنماط الخطوط، أحجام الملصقات ### 📈 نظام تداول كامل - **إشارات الدخول**: ملصقات BUY/SELL واضحة عند النقطة D - **3 أهداف ربح**: TP1 (38.2%)، TP2 (61.8%)، TP3 (100% CD) - **وقف الخسارة**: يتم حسابه وعرضه تلقائياً - **توقيت الدخول**: خيار للدخول عند D أو الشمعة التالية - **أسماء النماذج**: كل نموذج مُسمى (مثل "Bullish Bat") ### 🧹 الوضع المبسط - تبديل لإخفاء جميع الزخارف - يعرض فقط: إشارات BUY/SELL، الأهداف، ووقف الخسارة - مثالي للمتداولين ذوي الخبرة الذين يريدون شارت نظيف ### 🚫 نظام منع التداخل - إعداد **الحد الأدنى من الشموع بين النماذج** - يمنع الشارت المزدحم بالنماذج المتداخلة - يضمن عرض النماذج الأحدث والصالحة فقط - قابل للتعديل من 5 إلى 50 شمعة ### 🔔 نظام تنبيهات ذكي - **3 أنواع تنبيهات**: إشارة شراء، إشارة بيع، أي إشارة - **متوافق مع Signal Tester**: يعمل مع أدوات الاختبار الخلفي - طريقة **alertcondition()** لتنبيهات TradingView - احصل على إشعار فوري عند اكتمال النماذج --- ## 🚀 دليل البدء السريع ### الإعدادات الموصى بها (للمبتدئين) ``` ZigZag Length: 12 Sensitivity: Medium PRZ Opacity: 40 Fill Opacity: 30 Entry on Next Candle: false Simplified Mode: false Min Bars Between Patterns: 15 ``` ### للتداول المباشر ``` Entry on Next Candle: true ← مهم! ``` ### للشارت النظيف ``` Simplified Mode: true ``` --- ## 📊 أفضل الممارسات ### الأطر الزمنية - **الأفضل**: 4 ساعات، يومي، أسبوعي - **جيد**: ساعة، ساعتين - **مقبول**: 15 دقيقة، 30 دقيقة ### الأسواق يعمل على **جميع الأسواق**: الفوركس، الأسهم، العملات الرقمية، السلع، المؤشرات ### إدارة المخاطر - المخاطرة لكل صفقة: 1-2% من الحساب - وقف الخسارة: استخدم SL المحسوب من المؤشر - أهداف الربح: خذ أرباح تدريجية عند TP1، TP2، TP3 - الحد الأدنى للمخاطرة/العائد: 1:2 --- ## 🎓 استراتيجيات التداول ### الاستراتيجية 1: المحافظة - الحساسية: Strict (صارم) - الدخول من الشمعة التالية: true - التأكيد مع RSI/MACD ### الاستراتيجية 2: العدوانية - الحساسية: Medium-Loose (متوسط-مرن) - دخول وخروج سريع - أخذ أرباح تدريجية عند TP1، TP2 ### الاستراتيجية 3: السوينج - الحساسية: Strict (صارم) - الإطار الزمني: 4 ساعات، يومي - الاحتفاظ حتى TP3 ### الاستراتيجية 4: متعدد الأطر الزمنية - تحديد النموذج على إطار زمني أعلى - الدخول على نموذج إطار زمني أقل --- ## 🔔 إعداد التنبيهات 1. انقر بزر الماوس الأيمن على الشارت → **"Add Alert"** 2. الشرط → **"Harmonic Patterns Pro 1.0 "** 3. اختر: Buy Signal / Sell Signal / Any Signal 4. اضغط **"Create"** --- ## ❓ الأسئلة الشائعة **س: هل يعيد المؤشر الرسم؟** ج: لا. عدم إعادة الرسم 100%. **س: ما هو أفضل إعداد للحساسية؟** ج: ابدأ بـ "Medium" (متوسط). **س: كم عدد النماذج المتوقعة؟** ج: يومي: 1-3 شهرياً. ساعة: 5-10 أسبوعياً. **س: هل يمكنني استخدامه للاختبار الخلفي؟** ج: نعم! متوافق مع Signal Tester. **س: هل يجب أن أتداول كل نموذج؟** ج: لا. ركز على الإعدادات عالية الجودة. **س: ما هو معدل الربح النموذجي؟** ج: المبتدئون: 40-50%، المتقدمون: 65-75%. --- ## 🎯 لماذا تختار هذا المؤشر؟ ✅ **شامل** - جميع النماذج العشرة في مؤشر واحد ✅ **موثوق** - عدم إعادة الرسم 100% ✅ **احترافي** - تصميم نظيف وقابل للتخصيص ✅ **كامل** - الدخول، الأهداف، ووقف الخسارة مشمولة ✅ **سهل الاستخدام** - سهل الاستخدام ✅ **مرن** - يعمل على جميع الأسواق والأطر الزمنية --- ## ⚠️ إخلاء المسؤولية هذا المؤشر هو أداة للتحليل الفني ولا ينبغي اعتباره نصيحة مالية. التداول ينطوي على مخاطر كبيرة للخسارة. استخدم دائماً إدارة المخاطر المناسبة ولا تخاطر أبداً بأكثر مما يمكنك تحمل خسارته. --- ## 🏆 الكلمة الأخيرة **مؤشر نماذج الهارمونيك الاحترافي 1.0** يجمع بين نظرية نماذج الهارمونيك الكلاسيكية والأتمتة الحديثة. ابدأ في تحديد مناطق الانعكاس عالية الاحتمالية اليوم! **الإصدار**: 1.0 | **المطور**: | **آخر تحديث**: أكتوبر 2025 **تداول موفق! 📊✨**
อินดิเคเตอร์ Pine Script®
โดย abusuhil
GC FCR OR5 (Webhook Alerts V1)⚡ FCR OR5 (Fair Value Gap + Opening Range 5-Min Strategy) Timeframe: 1-minute chart (uses 5-minute Opening Range reference). Core Concept: The FCR strategy trades breakouts and reversals that form immediately after the first 5-minute Opening Range (09:30 – 09:35 ET) — combining structural momentum (Fair Value Gaps) with confirmation beyond key OR levels. ⸻ 🧩 Logic Summary 1. Define the Opening Range (OR5) • From 09:30 – 09:35 ET, the script records the high and low. • Once that window closes, the OR is locked in for the day. 2. Detect a Displacement Fair Value Gap (FVG) • A 3-bar pattern (bar -bar ) that leaves a clean price gap, signaling impulsive movement. • FVG size must meet a minimum ATR or tick threshold (filters out noise). 3. Confirm Direction • Wait for price to retrace into the FVG (fills partially). • Then require a bar to close outside the gap and beyond the OR high/low, confirming momentum. • Optional safety logic cancels the setup if price invalidates the FVG before confirmation. 4. First-Candle Rule (FCR) Filters • No trades before the first 1-minute candle after 9:30 closes. • Only the first valid setup per day can trigger (optional). 5. Trade Entry • Enter long if a bullish FVG confirms above OR high. • Enter short if a bearish FVG confirms below OR low. 6. Risk Parameters • Default Stop Loss = 100 ticks, Take Profit = 175 ticks. • 1 trade per day (if enabled). ⸻ 📈 Behavior • Works best on structured days with clean OR expansion (Tues/Wed/Fri historically). • Avoids chop via ATR & FVG filters. • Captures first directional move after the opening range resolves. • Typical trade duration: 10–45 min. • Average win rate: ~60–65 %, Profit Factor ≈ 1.7–1.8 in recent tests.
อินดิเคเตอร์ Pine Script®
โดย GC_88
8AM # 9AM CRM Trading Model - Complete Beginner's Guide ## BEFORE YOU START **Important:** This strategy only works during market open hours (9:00 AM - 12:00 PM EST for NAS100/SPX). Do not trade outside these hours. **Risk Warning:** Start with a demo account first. Trade 2-4 weeks on demo before risking real money. --- ## STEP 1: SET UP YOUR TRADINGVIEW CHART 1. Open TradingView 2. Search for **NAS100** (Nasdaq 100 Index) 3. Click the **5-minute (5m)** timeframe button at the top Your chart should now show: - Blue dotted lines (8AM candle range) - Orange dotted lines (key level) - Small SWEEP triangles when price breaks levels --- ## STEP 2: UNDERSTAND THE SETUP The indicator shows a **4-step checklist** in the top-right HUD (Heads Up Display): **STEP 1: 8AM Range Set** - The indicator automatically captures the 8:00-9:00 AM candle's high and low - You should see two faint blue dotted lines - Status will say "SET" when ready - Nothing to do here - it's automatic **STEP 2: Key Level Found** - The indicator finds the nearest swing low or high (support/resistance) - You'll see a faint orange dotted line - Status will say "FOUND" when ready **STEP 3: Turtle Sweep** - Price must break ONE end of the 8AM range - You'll see a small blue triangle labeled "SWEEP" appear below the candle - This means price swept the low (bullish setup) or swept the high (bearish setup) **STEP 4: Confirmations** - The indicator looks for: - IFEG (bullish or bearish imbalance) - Order Block (reversal candle pattern) - Status shows YES or NO for each --- ## STEP 3: WAIT FOR THE SIGNAL Keep watching the **HUD on the right side**. It will show: ``` WAITING FOR SETUP STEP 1: 8AM Range Set: SET STEP 2: Key Level Found STEP 3: Turtle Sweep: NO STEP 4: Confirmations - IFEG: NO - Order Block: NO WHEN ALL 4 ✓ → TRADE ``` When **ALL FOUR steps show YES**, the indicator will: 1. Draw a **HUGE triangle** on the chart saying "BUY NOW" or "SELL NOW" 2. Draw three bold lines: - **WHITE line** = Entry price - **RED dashed line** = Stop loss - **GREEN line** = Take profit 3. Update the HUD with your trade numbers --- ## STEP 4: PLACE YOUR TRADE When you see the BUY NOW or SELL NOW signal: **For a LONG (BUY) trade:** 1. Look at the **WHITE line** = Your entry price 2. Look at the **RED dashed line** = Your stop loss (where to cut losses) 3. Look at the **GREEN line** = Your take profit (your target) Check the **HUD** for exact numbers: - Entry Price: - Stop Loss: - Take Profit: - Risk: - Reward: - R:R Ratio: **On your broker (MT4/MT5 or whatever you use):** 1. Click BUY/SELL 2. Set Entry = Entry Price from indicator 3. Set Stop Loss = SL price from indicator 4. Set Take Profit = TP price from indicator 5. Click TRADE **For a SHORT (SELL) trade:** Same steps but click SELL instead of BUY --- ## STEP 5: MANAGE YOUR TRADE Once you're in the trade: 1. **Let it run** - Don't move your stop loss or take profit 2. **Watch for price to hit your targets:** - If price hits the GREEN line first → You WIN (take profit hits) - If price hits the RED line first → You LOSE (stop loss hits) - If price breaks the WHITE line lower → Exit manually 3. **Don't hold past noon EST** - This strategy stops working after market lunch 4. **Close any open trades by 12:00 PM EST** --- ## IMPORTANT RULES **DO THIS:** - Only trade between 9:00 AM and 12:00 PM EST - Use a 5-minute chart - Follow the exact entry/SL/TP levels from the indicator - Start with 1 lot/contract on demo - Keep a trading journal (write down every trade) - Risk no more than 2% of your account per trade **DON'T DO THIS:** - Don't move your stop loss (moving stops = losing strategy) - Don't ignore the indicator signals and "feel" your way in - Don't trade outside the 9AM-12pm window - Don't use a 1-hour or 15-minute chart (must be 5-min) - Don't trade on demo for just 2 days then go live - Don't risk more than 2% per trade --- ## REAL EXAMPLE **9:15 AM EST - Price sweeps 8AM low, IFEG forms, Order Block confirmed** Your indicator shows: ``` ACTIVE TRADE - LONG Entry: 24,865.50 Stop Loss: 24,820.00 Take Profit: 24,920.00 Risk: 45.50 pts Reward: 54.50 pts R:R Ratio: 1:1.2 ``` You place trade: - BUY 1 contract at 24,865.50 - Stop at 24,820.00 (if wrong, you lose 45 points) - Target 24,920.00 (if right, you gain 54 points) **Result:** Price goes to 24,920 and your take profit hits. You WIN 54 points. --- ## DEMO ACCOUNT TESTING CHECKLIST Before trading real money, complete this on demo: - Trade for 5 trading days minimum - Execute at least 10 trades - Win rate is 50% or better - Each loss is smaller than each win (following your R:R) - You didn't miss any signals - You stuck to the rules (no moving stops, proper timeframe, etc) - You made more money than you lost overall If you don't meet these criteria, keep practicing on demo. Don't go live yet. --- ## COMMON MISTAKES NEW TRADERS MAKE **Mistake 1: Wrong Timeframe** - Using 1h or 15m instead of 5m chart - Result: Misses setups or generates false signals **Mistake 2: Moving Stop Loss** - Indicator says SL at 24,820, but you move it to 24,800 to "give it room" - Result: You get stopped out randomly **Mistake 3: Trading Outside Hours** - Trading at 12:30 PM or 2:00 PM - Result: Strategy stops working, you lose money **Mistake 4: Ignoring the Signal** - Indicator says BUY, but you "feel" like it won't work - Result: You miss winners or take trades you shouldn't **Mistake 5: Not Using Stop Loss** - "I'll just watch it and exit if it goes bad" - Result: One bad move and you're down $500 before you can react --- ## WHAT TO EXPECT **Week 1:** You'll find the indicator confusing. That's normal. Watch 5+ setups. **Week 2:** You'll start to understand when setups are forming. **Week 3-4:** You should see some winning trades. Others will hit stop loss. This is normal. **After 4 weeks:** You should have enough demo data to decide if this strategy works for you. --- ## FINAL ADVICE 1. **Trade small first** - 1 lot on demo, then 1 lot on live 2. **Keep a journal** - Write down entry, stop, target, result for every trade 3. **Don't expect 100% win rate** - Even good strategies win 50-60% of trades 4. **Focus on following the rules** - Not on making money fast 5. **Ask yourself:** Am I following the indicator exactly, or am I guessing? The traders who make money follow the system. The traders who lose money ignore it and trade on "feel." Which trader will you be?
อินดิเคเตอร์ Pine Script®
โดย claudecurry23
7 Min KillZoneBefore using this indicator, make sure you have EMA lines 8, 11, 13, and 21 turned on. All four EMAs must be lined up in bullish direction (stacked upward) — this is very important for confirmation. Only when all EMAs align bullishly should you use this indicator for entries. ⸻ 🧠 How it works 1️⃣ When it runs: • Scans only 3:00–6:30 AM New York time (London Kill Zone). • Designed specifically for Gold (XAUUSD) and NASDAQ (NQ/NDX). • Works best on 7-minute or higher timeframes (≥7m). 2️⃣ What it looks for: • Candle A: bearish. • Candle B: bullish or doji (any size). • Candle C: bullish and body larger than Candle A’s body. 3️⃣ When it triggers: • After Candle C closes, if the three-candle pattern is valid and EMAs are bullishly aligned. 4️⃣ What happens: • Only Candle C is highlighted bright green — a visual cue for a bullish entry setup. • Candles A and B remain normal. ⸻ 🎯 Purpose This indicator is made only for bullish entries. It helps you spot strong continuation setups during the London session, especially when price aligns with bullish EMA structure. Simple, clean, and powerful — designed to keep your focus on momentum in the right direction.
อินดิเคเตอร์ Pine Script®
โดย sergeytsypan
Verified Price Action (Revention)Welcome to Verified Price Action (VPA), an all-in-one market analysis suite designed to transform you from a signal-follower into a market reader. Instead of providing simple "buy" or "sell" arrows that lack context, VPA uses a unique "cockpit" approach to give you a holistic view of the market's state, empowering you to make more intelligent trading decisions. The core of this indicator is the Volatility Catalyst Engine, a purely reactive strategy that identifies high-probability momentum continuations. It's built on the principle that the market alternates between balance (consolidation) and imbalance (a decisive move). VPA helps you identify this shift and act only after the new direction has been verified. The VPA Strategy: How It Works This indicator doesn't predict; it reacts. It waits for a specific sequence of price action to unfold before alerting you to a potential opportunity. Market Pause (The Anchor Bar): The script first identifies a period of volatility contraction—an Anchor Bar. This is a small, indecisive candle where the market is pausing and building energy. Volatility Expansion (The Catalyst Bar): Next, it waits for a strong, impulsive Catalyst Bar to break out from the Anchor Bar's range. This explosive move reveals the market's chosen direction. Momentum Confirmation: Finally, the script looks for immediate follow-through on the next candle to verify the breakout's strength. Only when this full sequence is complete does the dashboard update to a "CONFIRMED" state. Key Features The VPA Cockpit Dashboard: The heart of the indicator. A dynamic status panel tells you exactly where we are in the VPA sequence: Searching...: Looking for favorable, trending market conditions. Anchor Detected: A volatility contraction has been found. Pay attention. Bullish/Bearish Catalyst!: A breakout has occurred. Get ready. CONFIRMED LONG/SHORT: The breakout has been verified. Interactive Trend Ribbon: This is more than just a moving average ribbon. It not only displays the current trend direction but also ignites to a bright, vibrant color on a Catalyst Bar, giving you an immediate visual cue that a significant move is underway. Built-in Market Filters: The VPA engine automatically checks for a Trending Regime and aligns with Higher-Timeframe Consensus, ensuring you are only analyzing setups that are flowing with the broader market current. Dynamic Liquidity Targets: Automatically plots key buy-side and sell-side liquidity levels based on recent swing points, helping you identify potential targets. OB/OS Pressure Gauge: A sleek meter at the bottom of the chart provides a consensus view of multiple oscillators, helping you gauge market exhaustion at a glance. How to Use This Indicator Check the Environment: First, look at the "Overall Bias" and "Market Regime" on the dashboard. The ideal setup occurs in a "TRENDING" market where your intended direction matches the higher-timeframe bias. Wait for the "Catalyst!": Monitor the "VPA Status." When it changes to Anchor Detected, it's time to watch closely. The moment it updates to Bullish Catalyst! or Bearish Catalyst! (and the ribbon ignites), you have a potential setup in play. Make Your Decision on "Confirmed": The final CONFIRMED LONG/SHORT status on the dashboard is your cue that the strategy's conditions have been fully met. Use this information, along with your own analysis, to manage your trade. This tool was built to help the community trade with more context and confidence. Enjoy!
อินดิเคเตอร์ Pine Script®
โดย Revention