เริ่มกันเลย

Volume Weighted Average Price (VWAP)

SMA VWAP BANDS [qrsq]Description This indicator is used to find support and resistance utilizing both SMA and VWAP. It can be used on lower and higher time frames to understand where price is likely to reject or bounce. How it works Rather than using the usual calculation for the VWAP, instead this script smooths the volume first with the SMA and then respectively calculates the smoothed multiplication of high, low and close price with the volume individually. These values are then divided by the smoothed volume to find individual VWAP's for each of the sources. The standard deviations of these are calculated, resulting in an upper, lower and middle band. It is essentially VWAP bands with some smoothed calculations in the middle. How to use it I like to use the bands for LTF scalping as well as HTF swings. For scalping: I tend to use either the 5m or 15m TF I then set the indicator's TF to 1m I will take a scalp based on the bands confluence with other PA methods, if price is being either supported or rejected. For swings: I tend to use a variety of TFs, including: 30m, 1H, 4H, D I then set the indicator's TF to "Chart" I will take a swing based on the bands confluence with other PA methods, if price is being either supported or rejected. I also tend to use them on perpetual contracts as the volume seems to be more consistent and hence results in more accurate support and resistance.
อินดิเคเตอร์ Pine Script®
โดย qrsq
5
Point of Control V2 The genesis of this project was to create a POC library that would be available to deliver volume profile information via pine to other scripts of indicators and strategies. This is a republish of an invite only script to open access This is the indicator version of the library function. A few points of significance: - Allows the choice of reset of the study period, day/week or bars. This is simple enough to expand to other conditions - Bar count resets starting from the beginning of the data set (bar index =0) vs bars back from the end of the data set - A 'period' in this context is the time between resets - the start of the POC (eg. start of Day or Week) until it resets (for example at the beginning of a next day or week) - Automates the determination of the increment level rather than the user specifying ticks or price brackets - Does not allow for setting the # of rows and then calculating the implied price increment levels - When a period is complete it is often useful to look back at the POCs of historical periods, or extend them forward. - This script will find the historical POCs around the current price and display them rather than extend all the historical POC lines to the right - This script also looks across all the period POCs and identifies the master POC or what I call the Grand POC, and also the next 3 runner up POCs This indicator is also available as a library. BINANCE:BTCUSDT NSE:NIFTY OANDA:XAUUSD NASDAQ:AAPL TVC:USOIL
อินดิเคเตอร์ Pine Script®
โดย JohnBaron
31
VWAP + EMA Analysis [Joshlo]Overview and Use Case VWAP Analysis gives the possibility to combine multiple time frames of VWAP along with a triplet of exponential moving averages. This can provide insight into potential scalp, swing and longer term trades, depending on your time frame. The use of this indicator with it's setup is based off the the Scalp Setup Alerts provided by Roensch Capital. The primary use for this script is to help with intraday scalp set ups. Using the Daily VWAP, turned on by default, we can look for price to respect and bounce from one of the VWAP lines (support or resistance) back toward equilibrium, we can also look for price to bounce off of equilibrium and move back toward VWAP support or resistance. The chart attached shows AMD bouncing off of the Daily time frame VWAP Resistance level multiple times (see yellow boxes), often with confirmation given by an increase in volume which is often far higher than the average volume. In many of these cases a short position could've been opened or put option could have been placed with a profitable outcome. Every line projected onto the chart via this indicator has the potential to create support or resistance as well as causing 'hang ups', meaning price loses it's momentum, slows down and hangs out in the particular area. This is shown on the chart within the green box. Chart walkthrough - See attached chart After a rejection off of the Daily VWAP Resistance line (depicted by the white circle), price starts to move back toward Daily VWAP Equilibrium. In order to reach this line, price needs to move through the 20EMA (white) and 50EMA (purple), the Weekly VWAP Resistance (red circles) and the 200EMA (orange). All of these lines are a part of this single indicator. The 20EMA seems to offer little resistance but follows the price on it's move, offering some resistance to a volatile move upward. Initially upon contact with the 50EMA, price hangs up and bounces above and below the line whilst finding support on the Weekly VWAP Resistance at the same time. This causes a 'hang up' or sideways movement for around 20 minutes of trading. A potential trade may have entered at the white circle with a VWAP Resistance rejection and exited upon contact with the 50EMA in anticipation of multiple EMAs and support / resistance lines converging which is known to cause price movement to slow. Eventually with an increase in volume, price breaks below the 20EMA (white), 50EMA (purple) and the Weekly VWAP Resistance level (red circles). Price then finds support on the 200EMA (orange), although there was potential for the price to fall to the Daily VWAP Equilibrium (solid blue). As the Red VWAP lines tend to act more often as resistance as opposed to support (price is rarely above these lines for extended periods), the trade from earlier may have profited more by awaiting contact with the 200EMA before exiting, taking the assumption that the Weekly VWAP Resistance was more likely to act as resistance than support. A period of consolidation in the green box, around the Weekly VWAP Resistance, 20EMA, 50EMA and with support from the 200EMA eventually resulted in another break out where the price came back up to the Daily VWAP Resistance. Prior to the end of this trading day, there were two more opportunities for scalp setups based off of the price showing consistent rejections off the Daily VWAP Resistance back down to the 50EMA. In the final example, price breaks above the Daily VWAP Resistance but quickly rejects off of the Monthly VWAP Resistance. For examples where the VWAP Resistance or Support or broken, it can help to look at an indicator such as the RSI to look for bullish divergence or bearish divergence. Just as this example shows bounces and rejection off of VWAP Resistance, the same applies around the Equilibrium and Support VWAP lines. The perfect scenario would be to find a ticker where there has already been two or three bounces off of one of these levels, with the goal of taking the trade on the next bounce and either using a percentage price target or technical price target based off of the EMAs or VWAP lines. If there are EMAs close in the direction you want to take the trade, there is a higher chance of hang ups and reversals, so a clear run is the more desired trade set up. You can also look for these indicator lines to stack up in order to form a stronger support and resistance. For example the 200EMA and Daily VWAP Equilibrium being close to each other may suggest it would take more of an effort to break both of these levels, but one by itself may break more easily. Indicator Setup In the settings for the indicator, almost everything you might want to change can be done from the Input tab. The three options for VWAP (daily, weekly and monthly) allow for analysis on multiple time frames. Daily is turned on as standard. Standard Deviation Multiplier is set to 2 as standard, this effects the distance of the VWAP support and resistance from the equilibrium line. This seems to be a level that works well with finding support and resistance lines, however if there is excessively high or low volume, occasionally the lines can be thrown off. You can adjust this level if required to find a 'sweet spot' where price likes to reject or find support. The colors for all VWAPs can be adjusted via the Inputs tab, however if you'd like to change the type of line these are depicted as, this can be done from the Styles tab. The 3 EMAs (20, 50 and 200) can be toggled on or off and also have their color changed. The style of the lines can be adjusted from with the Styles tab if required.
อินดิเคเตอร์ Pine Script®
โดย Joshlo
VWAP With EMAFor those who want the classic Volume Weighted Average Price and Ema on the same overlay. This script utilizes the same protocols as the VWAP and EMA you currently use. Just frees up an indicator space. KEEP UP TO DATE Are you a college student or graduate? Join College Town Trade discord for helpful community specializing in trading stocks, options, and crypto. Our staff consists of a group of college students with 10+ years of combined experience. Collectively we have profited and made well above an average yearly salary while being in college. The community aspect is everything and the team always listens and appreciates feedback. We all earn and learn together. There are free trials in place in order for you to see what it’s all about. These are in place so we can gain your trust and show transparency! I look forward to seeing you in the community advBtBjDhk
อินดิเคเตอร์ Pine Script®
โดย sraomberts
3
VWAP With EMA Overlay (Adjustable Anchor)For those who want the classic Volume Weighted Average Price and Ema on the same overlay. This script utilizes the same protocols as the VWAP and EMA you currently use. Just frees up an indicator space. KEEP UP TO DATE Are you a college student or graduate? Join College Town Trade discord for helpful community specializing in trading stocks, options, and crypto. Our staff consists of a group of college students with 10+ years of combined experience. Collectively we have profited and made well above an average yearly salary while being in college. The community aspect is everything and the team always listens and appreciates feedback. We all earn and learn together. There are free trials in place in order for you to see what it’s all about. These are in place so we can gain your trust and show transparency! I look forward to seeing you in the community advBtBjDhk
อินดิเคเตอร์ Pine Script®
โดย sraomberts
Chart VWAP█   OVERVIEW This indicator displays a ​Volume-Weighted Average Price anchored to the leftmost visible bar of the chart. It dynamically recalculates when the chart's visible bars change because you scroll or zoom your chart. If you are not already familiar with ​VWAP, our Help Center will get you started. The typical ​VWAP is designed to be used on intraday charts, as it resets at the beginning of the day. Our Rolling ​VWAP , instead, resets on a rolling time window. You may also find the VWAP Auto Anchored built-in indicator worth a try. █   HOW TO USE IT Load the indicator on an active chart (see the Help Center if you don't know how). By default, it displays the chart's ​VWAP in orange and a simple average of the chart's visible close values in gray. This average can be used as a companion to the ​VWAP, since both are calculated from the same set of bars. The script's settings allow you to hide it. You may also use the script's settings to enable the display of the chart's OHLC (open, high, low, close) levels and the values of the high and low. These are also calculated from the range of visible bars. You can complement the high and low lines with their price and their distance in percent from the chart's latest visible close . You can use the levels to quickly identify the distances from extreme points in the visible price range, as well as observe the visible chart's beginning and end prices. █   NOTES FOR Pine Script™ CODERS This script showcases three novelties:  • Dynamic recalculation on visible bars  • The VisibleChart library by PineCoders  • The new `anchor` parameter of ta.vwap() Dynamic recalculation on visible bars This script behaves in a novel way made possible by the recent introduction of two new built-in variables: chart.left_visible_bar_time and chart.right_visible_bar_time , which return the opening time of the leftmost and rightmost visible bars on the chart. These are only two of many new built-ins in the `chart.*` namespace. See this blog post for more information, or look up them up by typing "chart." in the Pine Script™ Reference Manual . Any script using chart.left_visible_bar_time or chart.right_visible_bar_time acquires a unique property, which triggers its recalculation when traders scroll or zoom their chart, causing the range of visible bars to change. This new capability is what makes it possible for this script to calculate its ​VWAP on the chart's visible bars only, and dynamically recalculate if the user scrolls or zooms their chart. This script is just a start to the party; endless uses for indicators that redraw on changes to the chart will no doubt emerge through the hands of our community's Pine Script™ programmers. The VisibleChart library by PineCoders The newly published VisibleChart library is designed to help programmers benefit from the new capabilities made possible by the fact that Pine Script™ code can now tell when it is executing on visible bars. The library's description, functions and example code will help programmers make the most of the new feature. This script uses three of the library's functions:  • `PCvc.vVwap()` calculates a ​VWAP for visible bars. ​​​​ • `PCvc.​avg()` calculates the average of a source value for visible bars only. We use it to calculate the average close (the default source).  • `PCvc.chartXTimePct(25)` calculates a time value corresponding to 25% of the horizontal distance between visible bars, starting from the left. The new `anchor` parameter of ta.vwap() Our script also uses this new `anchor` parameter to reset the ​VWAP at the leftmost visible bar. See how simple the code is for the VisibleChart library's `vVwap()` function. Look first. Then leap.
อินดิเคเตอร์ Pine Script®
โดย TradingView
19
VWAP and previous VWAP for Support & Resistance for D W MI overhauled my old multi timeframe VWAP script to make the VWAP OC-Check work for all timeframes. Now only one function is used to calculate the 3 preset VWAPs. Previous VWAPS = the price where the last session closed sometimes work as Support and Resistance. The OC-Check Mode theory examines if the VWAP from the Open is above or below the VWAP from Close and if price is above or below normal VWAP (HLC3). This way we have 4 states: Red = Strong Downtrend Orange = Weak Downtrend Blue = Weak Uptrend Green = Strong Uptrend As always it is just a theory - nothing is set in stone regarding any indicator.
อินดิเคเตอร์ Pine Script®
โดย MartinWeb
14
MTF EMASMulti time frame EMA This script will plot the configured EMAS on the current time frame (CTF) and also the same EMAS on a higher time frame (HTF). Hard coded according: * 5m EMAS will be plotted on TF bellow 5m * Daily EMA will be plotted on TF above 5m and bellow 1D * Weekly EMA will be plotted on daily TF * Monthly EMA will be plotted on weekly TF This configuration give us the opportunity to watch EMA support/resistance from HTF on the CTF
อินดิเคเตอร์ Pine Script®
โดย JoaoKunha
1
VWAP Suite█ OVERVIEW This indicator is an attempt to bring all VWAP functionalities under one umbrella suite, the existing VWAPs are great and this was made to provide all functionalities. (pending more updates as well) █ FEATURES Multiple VWAPs MTF Individual Band configuration Previous vwap closes Date tracking of previous closes MTF Options Enabling the other VWAPS with any timeframe will allow the user to use the "VWAP Anchor" setting to choose what HTF Vwap to be displayed "Prev Close" This setting enables all historical closes to be displayed with extension "Track Dates" Can be used to keep date information of 2 previous closes and further back █ HOW TO USE IT The indicator is quite straight forward in its application, as you would expect of a normal VWAP. At the top of the settings pane the indicator has some functionality that would control the VWAPs globally, e.g. disabling show bands disables all bands for all the VWAPs. Each VWAP has individual settings that can be controlled such as coloring, which bands enabled, previous closes, labelling... █ SUGGESTION My suggestion for clarity is to use 1 VWAP with bands, and a 2nd with no bands + Previous close enabled at a higher timeframe █ LIMITATIONS OF PINE (Please read) I see many users going on different indicators with MTF in mind and trying to use it for LTF data e.g. 1hour chart, and selecting 5min in chart settings. This is not recommended by the team themselves and should be noted for use always use HTF: www.tradingview.com To understand how to use VWAP please refer to some education that can be found for free online Heres an example of a trader using the tool himself: www.youtube.com █ Future Updates: Previous Close Line extensions Previous Highs and Lows of VWAP mapped out for users Suggestions Welcome!
อินดิเคเตอร์ Pine Script®
โดย spacemanbtc
7
󠀠Neo Matrix What is NeonMoney Indicator? NeonMoney Indicator is a trend following indicator which gives strong support and resistance indications with some moving averages. Description After the long research of 2 years along with 100’s of indicators & oscillators we have created this wonderful indicator which can avoid signals in a choppy market & gives perfect signal to buy and sell at a right time with high winning probability and higher reward to risk. Main part of this indicator is timeframe period that is it shifts from one to another pivots , vwap and MAs tf automatically which helps in top down analysis. This indicator is made with Vwap , MA, cpr and fibonacci pivots calculations. It can be useful to trade every market like in crypto, forex, commodities and as well as stock market . To use this indicator trader must have basic understanding of candle pattern and chart pattern identification studies with moving averages retrenchments. This indicator works well & gives better results if you have moving average retrenchment knowledge. When candles are retrenching specific moving average line then also sometimes traders get confuse whether to enter with moving average direction / favor or not. So, to come out from this confusion this indicator is very useful. Because it gives signal in moving average favors and target at pivot levels. So ultimately traders gain some confident on his/her trade that he/she is in the right side of the market. Another advantage of this indicator is in some of the criteria it gives fix signal in-between the candle formation & once signal is given then it will not change. About uses instruction and components. Time frame – 1m, 3m , 15m, 1H, 4H, DailyTF Components: Vwap , MAs, CPR , and Fibonacci Pivots . Dotted line - Vwap Straight gray line and zone - CPR Curvy Gray lines - MAs Colorful lines - Fibonacci pivots
อินดิเคเตอร์ Pine Script®
โดย NeonMoney
Donchian Anchored Vwap + HandoffsIn this script I try to incorporate Brian Shannon's Anchored VWAP hand off system into an automated initial anchoring system using Donchian Highs and Lows. I have also added an average of all the hand-off vwaps. Higher values in "Donchain Lookback" will display longer term sentiment and vice versa. *Credit to trader dysrupt for their 'Anchored VWAP Hand-off' script
อินดิเคเตอร์ Pine Script®
โดย elScipio
2
Automated Anchored VWAPThis was reasonably easy to put together and I can't find one that does this in the Library and I've been wanting one. Of course, the drawing tool is just fantastic, but sometimes it can be forgotten as new pivots emerge. What you'll find elsewhere in the Library is a nice variety of fancier methods for determining an anchor point with labels, lines, timestamps and standard deviations. This is just a simple script to pull the Anchored VWAP off of the most recent pivot and update that as new pivots become defined. I wanted it to be really portable so it could easily work into other things you're working on while also keeping the chart reasonably clean. The way this functions is as follows: A new pivot is found and VWAP is calculated from it. At that point the prior aVWAP is no longer tracked and it picks up from the new pivot . Of course this means that the plot doesn't generate until the pivot is actually confirmed, which in turn means that the plot doesn't reach back to the pivot , it begins based on whatever "right bars" period you end up choosing. I kind of like it that way, because you have your eyes on the one that matters until the new one matters. The downside is that it doesn't track old pivots . The old aVWAP might still be in play. But if you track all of the old one's you'll have a 100 lines on your chart and no one wants that. I recommend when you look back and think the old one is still in play, use the drawing tool to keep it on the chart. Otherwise, let the script do the work for you. Hope its helpful. Let me know what you think should be done to make it better.
อินดิเคเตอร์ Pine Script®
โดย kurtsmock
22
JxModi CamarillaAddition to the Camarilla Pivots, This script will allow user to Add 4+1 more Indicators -EMA-9/20/50/200 & VWAP . As well EMA can be change. All the Support(L) and Resistance(H) levels can be enabled / disabled from settings. It will allow to select multiple combinations of support(L) & Resistance(H) levels across levels at any of the Time-frames individually and combined. All EMA & VWAP Indicators can be can be enabled / disabled from settings. Camarilla pivots Support(L) & Resistance(H) levels Can be Changed for any of the Time frames.
อินดิเคเตอร์ Pine Script®
โดย jxmodi
1
Big Snapper Alerts R3.0 + Chaiking Volatility condition + TP RSI//@version=5 // // Bannos // #NotTradingAdvice #DYOR // Disclaimer. // I AM NOT A FINANCIAL ADVISOR. // THESE IDEAS ARE NOT ADVICE AND ARE FOR EDUCATION PURPOSES ONLY. // ALWAYS DO YOUR OWN RESEARCH // // Author: Adaptation from JustUncleL Big Snapper by Bannos // Date: May-2022 // Version: R1.0 //Description of this addon - Script using several new conditions to give Long/short and SL levels which was not proposed in the Big Snapper strategy "Big Snapper Alerts R3.0" //" //This strategy is based on the use of the Big Snapper outputs from the JustUncleL script and the addition of several conditions to define filtered conditions selecting signal synchrones with a trend and a rise of the volatility. //Also the strategy proposes to define proportional stop losses and dynamic Take profit using an RSI strategy. // After delivering the temporary ong/short signal and ploting a green or purple signal, several conditions are defined to consider a Signal is Long or short. //Let s take the long signal as example(this is the same process with the opposite values for a short). //step 1 - Long Definition: // Snapper long signal stored in the buffer variable Longbuffer to say that in a close future, we could have all conditions for a long // Now we need some conditions to combine with it: //the second one is to be over the Ma_medium(55) //and because this is not selective enough, the third one is a Volatility indicator "Chaikin Volatility" indicator giving an indication about the volatility of the price compared to the 10 last values // -> Using the volatility indicator gives the possibility to increase the potential rise if the volatility is higher compared to the last periods. //With these 3 signals, we get a robust indication about a potential long signal which is then stored in the variable "Longe" //Now we have a long signal and can give a long signal with its Stop Loss // The Long Signal is automatically given as the 3 conditions above are satisfied. // The Stop loss is a function of the last Candle sizes giving a stop below the 70% of the overall candle which can be assimilated to a Fibonacci level. Below this level it makes sense to stop the trade as the chance to recover the complete Candle is more than 60% //Now we are in an open Long and can use all the mentioned Stop loss condition but still need a Take Profit condition //The take profit condition is based on a RSI strategy consisting in taking profit as soon as the RSI come back from the overbought area (which is here defined as a rsi over 70) and reaching the 63.5 level to trigger the Take Profit //This TP condition is only active when Long is active and when an entry value as been defined. //Entry and SL level appreas as soon as a Long or short arrow signal does appears. The Take profit will be conidtioned to the RSI. //The final step in the cycle is a reinitialization of all the values giving the possibility to detect and treat any long new signal coming from the Big Snapper signal.
กลยุทธ์ Pine Script®
โดย Batosbados
18