Session OHLC Statistical MappingSession OHLC Statistical Mapping — Mean/Median Price Zones (Percent-Normalized)
Session OHLC Statistical Mapping plots statistically derived price zones around a session’s Open using historical behavior of that same session on a higher “mapping” timeframe (15m / 1H / 4H / Daily / Weekly).
It is designed to answer a simple question:
“Based on historical sessions, how far does price typically displace away from the open — and how far does it typically manipulate against it?”
Instead of using fixed ATR or arbitrary ranges, this tool builds zones from real distribution data collected from previous sessions, using Mean / Median / Both and optional robust estimators (including Power Mean).
What the levels mean
The indicator draws five core levels (or zones when Mean+Median are shown together):
OPEN (O) — The anchor of the session.
+DIS — “Displacement” in the direction of the session’s move (typical expansion away from open).
-DIS — Displacement on the opposite side (symmetrical reference).
-MAN — “Manipulation” zone above open (often where price runs stops/liq before moving).
+MAN — Manipulation zone below open.
DIS vs MAN logic (per historical candle):
If the session candle is bullish:
DIS = High − Open
MAN = Open − Low
If the session candle is bearish:
DIS = Open − Low
MAN = High − Open
That means DIS captures directional expansion and MAN captures the typical counter-move or wick against the open.
Why Percent Mode matters (important for multi-asset trading)
This indicator supports Points and Percent modes.
Points mode is direct and works well when your instrument is stable in price scale.
Percent mode normalizes distances by the historical session open:
𝑟
𝑖
=
𝑑
𝑖
𝑠
𝑡
𝑎
𝑛
𝑐
𝑒
𝑖
𝑜
𝑝
𝑒
𝑛
𝑖
×
100
r
i
=
open
i
distance
i
×100
Then the statistic is computed on
𝑟
𝑖
r
i
, and converted back to points using the current session open.
✅ Percent mode is usually the best choice when you trade multiple instruments (Gold, indices, FX, crypto) or when price levels change over time, because it keeps the zones comparable across regimes.
Mean vs Median (and why “Both” is powerful)
Median represents the “typical” session behavior and is more resistant to outliers.
Mean reflects the average including rare but large expansions (fat tails).
If you select Both, the indicator draws a zone between mean and median, which effectively becomes a distribution band.
Practical interpretation:
Median area = common/expected range
Mean extension = “higher probability tail events” / stretched sessions
This is especially useful in volatile markets where occasional big days pull the mean away from the median.
Robust averaging (Power Mean, RMS, EMA)
Markets often have non-normal distributions (skew, fat tails). Standard arithmetic mean can be influenced heavily by rare extreme sessions. This script allows alternative estimators:
Power Mean (p > 1): increases sensitivity to larger values in a controlled way (useful when you want zones that respect occasional expansions without fully jumping to outlier extremes).
RMS: strongly weights larger moves.
EMA: prioritizes recent behavior (good when volatility regime changes quickly).
These options let you match the zones to how the market actually behaves instead of assuming a perfect bell curve.
How to use it in trading
1) Intraday bias around the Open
If price holds above OPEN, you can treat upside zones as the primary magnet (+MAN → +DIS).
If price holds below OPEN, downside zones matter more (+MAN → -DIS).
2) Targets and take-profit mapping
A simple structured approach:
First target: nearest MAN zone
Second target: DIS zone
Extended target: mean/median extremes (if “Both” is enabled)
3) Rejection / reversal zones
MAN zones often behave like “liquidity sweep” regions:
Price runs into a MAN zone, wicks, and returns through OPEN → reversal potential.
Price enters a DIS zone and stalls → partial take profit or tighten stops.
4) Session-to-session context
Because zones are drawn for historical sessions, they can act like:
daily/weekly range expectations
contextual “where price should struggle”
systematic reference levels for day structure
Best markets to use this on
This indicator is built for anything liquid and session-driven, including:
Futures (ES, NQ, YM, CL, GC, etc.)
Great for mapping daily/4H session expansions and where stop-runs occur.
Gold (XAUUSD / GC)
Percent mode helps because gold moves in changing volatility regimes.
Forex (EURUSD, GBPUSD, USDJPY, etc.)
Percent normalization is ideal for FX pairs and long historical comparisons.
Crypto (BTC, ETH)
Works well with EMA or Power Mean when volatility shifts frequently.
Tips for best results
Start with Mapping TF = Daily, Lookback = 60.
Use Percent mode if you compare different assets or time periods.
Use Both (Mean+Median) to see distribution width and avoid overconfidence in a single number.
Use Power Mean (p ≈ 1.4–1.8) if arithmetic mean feels too tight or too distorted by outliers.
Combine with structure: previous highs/lows, session highs/lows, and rejection candles.
What this indicator is not
It does not predict direction by itself.
It’s a statistical mapping tool: it tells you where price typically expands and where it often “manipulates” around the session open.
Your edge comes from combining these zones with confirmation (market structure, orderflow, volume, candlesticks, etc.).
ความผันผวน
Bitcoin Leverage Indicator📊 Bitcoin Leverage Indicator
A disciplined, VWAP-based leverage trading system for Bitcoin
🔍 What This Indicator Does
The Bitcoin Leverage Indicator is a professional-grade TradingView overlay designed to identify high-confidence long and short opportunities for Bitcoin, especially when trading with leverage (10–20x).
Instead of flooding the chart with signals, this indicator focuses on market structure, momentum, and regime control to help traders:
• Enter only when a clear directional move is present
• Avoid counter-trend and chop trades
• Exit with structure-based logic, not emotion
This tool is built for traders who value precision over frequency.
⸻
🧠 Core Logic (How It Thinks)
⚪ VWAP = Market Regime Filter
• Above VWAP → Long-only environment
• Below VWAP → Short-only environment
This prevents dangerous counter-trend trades and helps protect leveraged positions from squeezes.
⸻
📈 Entry Signals
The indicator plots one clear entry per trade:
🟢 BUY LONG
• Price above VWAP
• Bullish EMA structure
• Momentum confirms continuation
🔴 BUY SHORT
• Price below VWAP
• Bearish EMA structure
• Momentum confirms downside continuation
No duplicate entries. No spam.
⸻
💰 Take Profit Signal
🔵 TAKE PROFIT
• Appears when momentum begins to fade
• Designed to help lock gains before reversals
• Does not force an exit — it’s an early profit-protection signal
⸻
🟡 Exit Signals
🟡 EXIT LONG / EXIT SHORT
• Printed only once per trade
• Triggered by confirmed structure or momentum loss
• Prevents late exits and emotional over-holding
⸻
🛑 Over-Trading Protection
• Built-in cooldown logic
• Prevents rapid re-entries
• Ensures clean trade cycles:
Entry → Manage → Exit → Reset
⸻
🎯 Designed For
✔ Bitcoin leverage trading
✔ Intraday & swing trading
✔ Traders using VWAP + EMA structure
✔ Clean charts and decisive signals
✔ 24/7 markets (crypto-native logic)
⸻
🚫 What This Indicator Does NOT Do
• No prediction
• No martingale logic
• No repainting
• No signal spam
• No counter-trend gambling
Every signal is structure-confirmed and rule-based.
⸻
⚠️ Risk Disclaimer
This indicator is a decision-support tool, not financial advice.
Leverage trading carries significant risk. Always use proper risk management and confirm signals with your own trading plan.
⸻
🧭 Final Note
This indicator is built with one philosophy:
We don’t trade every move — we trade the right moves.
If you value discipline, clarity, and structure in leveraged Bitcoin trading, the Bitcoin Leverage Indicator is designed for you.
Aurora Volatility Bands [JOAT]Aurora Volatility Bands - Dynamic ATR-Based Envelope System
Introduction and Purpose
Aurora Volatility Bands is an open-source overlay indicator that creates multi-layered volatility envelopes around price using ATR (Average True Range) calculations. The core problem this indicator solves is that static bands (like fixed percentage envelopes) fail to adapt to changing market conditions. During high volatility, static bands are too tight; during low volatility, they're too wide.
This indicator addresses that by using ATR-based dynamic bands that automatically expand during volatile periods and contract during quiet periods, providing contextually appropriate support/resistance levels at all times.
Why These Components Work Together
The indicator combines three analytical approaches:
1. Triple-Layer Band System - Inner (1x ATR), Outer (2x ATR), and Extreme (3x ATR) bands provide graduated levels of significance
2. Volatility State Detection - Compares current ATR to historical average to classify market regime
3. Multiple MA Types - Allows customization of the center line calculation method
These components complement each other:
The triple-layer system gives traders multiple reference points - inner bands for normal moves, outer for significant moves, extreme for rare events
Volatility state detection tells you WHEN bands are expanding or contracting, helping anticipate breakouts or mean-reversion
MA type selection lets you match the indicator to your trading style (faster EMA vs smoother SMA)
How the Calculation Works
The bands are calculated using ATR multiplied by configurable factors:
float atr = ta.atr(atrPeriod)
float innerUpper = centerMA + (atr * innerMult)
float outerUpper = centerMA + (atr * outerMult)
float extremeUpper = centerMA + (atr * extremeMult)
Volatility state is determined by comparing current ATR percentage to its historical average:
float atrPercent = (atr / close) * 100
float avgAtrPercent = ta.sma(atrPercent, volatilityLookback)
float volatilityRatio = atrPercent / avgAtrPercent
bool isExpanding = volatilityRatio > 1.2 // 20%+ above average
bool isContracting = volatilityRatio < 0.8 // 20%+ below average
Signal Types
Band Touch - Price reaches inner, outer, or extreme bands
Mean Reversion - Price returns to center after touching outer/extreme bands
Breakout - Sustained move beyond outer bands during volatility expansion
Dashboard Information
Volatility - Current state (EXPANDING/CONTRACTING/NORMAL)
Vol Ratio - Current volatility vs average (e.g., 1.5x = 50% above average)
ATR - Current ATR value
ATR % - ATR as percentage of price
Zone - Current price position (EXTREME HIGH/UPPER ZONE/CENTER ZONE/etc.)
Position - Price position as percentage within band structure
Width - Total band width as percentage of price
Using SMA in settings:
How to Use This Indicator
For Mean-Reversion Trading:
1. Wait for price to touch outer or extreme bands
2. Check that volatility state is NORMAL or CONTRACTING (not expanding)
3. Look for reversal candlestick patterns at the band
4. Enter toward center MA with stop beyond the band
For Breakout Trading:
1. Wait for volatility state to show EXPANDING
2. Look for price closing beyond outer bands
3. Enter in direction of breakout
4. Use the band as trailing stop reference
For Volatility Analysis:
1. Monitor volatility ratio for regime changes
2. CONTRACTING often precedes large moves (squeeze)
3. EXPANDING confirms trend strength
Using VWMA and Mean Reversion Signal/MR:
Input Parameters
ATR Period (14) - Period for ATR calculation
Inner/Outer/Extreme Multipliers (1.0/2.0/3.0) - Band distance from center
MA Type (EMA) - Center line calculation method
MA Period (20) - Period for center line
Volatility Comparison Period (20) - Lookback for volatility state
Timeframe Recommendations
15m-1H: Good for intraday mean-reversion
4H-Daily: Best for swing trading and breakout identification
Weekly: Useful for position trading and major level identification
Limitations
ATR-based bands lag during sudden volatility spikes
Mean-reversion signals can fail in strong trends
Breakout signals may whipsaw in ranging markets
Works best on liquid instruments with consistent volatility patterns
Open-Source and Disclaimer
This script is published as open-source under the Mozilla Public License 2.0 for educational purposes. The source code is fully visible and can be studied to understand how each component works.
This indicator does not constitute financial advice. Band touches do not guarantee reversals. Past performance does not guarantee future results. Always use proper risk management, position sizing, and stop-losses.
- Made with passion by officialjackofalltrades
MMM Fear & Greed Meter - Multi-Asset @MaxMaseratiMMM Fear & Greed Meter - Multi-Asset Edition
Professional Sentiment Analysis for Futures, Stocks, and Crypto
The MMM Fear & Greed Meter is an advanced market sentiment indicator that transforms CNN's Fear & Greed methodology into an actionable trading tool. Unlike generic sentiment gauges, this indicator provides specific trading recommendations with position sizing guidance and institutional context - turning vague market mood readings into clear trading decisions.
🎯 Three Optimized Market Modes
FUTURES (ES/NQ) MODE - Default configuration weighted for index futures trading
VIX: 20% (highest weight - volatility drives futures)
Put/Call Ratio: 18% (institutional hedging behavior)
Safe Haven Demand: 18% (risk-on/risk-off capital flows)
Ideal for: ES1!, NQ1! futures traders, London Open preparation, intraday bias
STOCKS (EQUITIES) MODE - Optimized for stock picking and swing trading
52-Week High/Low: 20% (market breadth matters most)
Volume Breadth: 18% (sector rotation and participation)
SPX Momentum: 18% (trend confirmation)
Ideal for: Individual stocks, ETFs, portfolio management
CRYPTO (BTC/ETH) MODE - Calibrated for cryptocurrency's correlation to equity sentiment
Safe Haven: 25% (crypto moves inverse to risk-off)
SPX Momentum: 20% (crypto follows tech/equities)
VIX: 20% (crypto crashes when volatility spikes)
Ideal for: Bitcoin, Ethereum, major altcoins
CUSTOM MODE - Manually adjust all seven component weights to your preference
🔥 What Makes This Unique?
1. ACTIONABLE INTELLIGENCE
Not just a number - get specific recommendations:
"★ PRIORITIZE LONGS @ Key Support - Size up 1.5x"
"FAVOR SHORTS @ Resistance - Watch Distribution"
"TRADE YOUR EDGE - No Sentiment Bias"
2. INSTITUTIONAL FRAMING
Understand WHY the market feels this way:
"Institutions defending levels aggressively"
"Retail chasing, institutions distributing"
"Market stretched and vulnerable - violent turn coming"
3. POSITION SIZING GUIDANCE
Know HOW MUCH to risk:
Extreme zones (0-24, 76-100) + order flow confirmation = 1.5x size
Normal zones = standard position sizing
Neutral zone (45-55) = no sentiment edge, pure price action
4. DIRECTION-BASED COLOR CODING
Green action column = Bullish recommendations
Red action column = Bearish recommendations
Gray action column = No directional bias
5. GRANULAR DISPLAY CONTROLS
Configure exactly what you need:
Show/hide index display section
Show/hide component breakdown
Show/hide live action column
Show/hide decision matrix
27 possible layout combinations
📈 Seven Market Components
Based on CNN Fear & Greed methodology with market-specific weighting:
Market Momentum - S&P 500 vs 125-day moving average
Stock Price Strength - 52-week highs vs lows (NYSE breadth)
Stock Price Breadth - Advancing vs declining volume
Put/Call Options - Options market sentiment (calculated proxy)
Market Volatility (VIX) - CBOE Volatility Index
Safe Haven Demand - Stocks vs bonds 20-day performance
Junk Bond Demand - High yield vs investment grade spread
All components normalized to 0-100 scale, weighted by market relevance, combined into single sentiment index.
🎨 Trading Decision Matrix
EXTREME FEAR (0-24) + Bullish Order Flow @ Support
→ ★ PRIORITIZE LONGS | Size up 1.5x | Strong bounce expected
FEAR (25-44) + Bullish Order Flow @ Support
→ FAVOR LONGS | Normal size | Good reversal context
NEUTRAL (45-55) + Any Setup
→ TRADE YOUR EDGE | Standard approach | No macro bias
GREED (56-75) + Bearish Order Flow @ Resistance
→ FAVOR SHORTS | Watch distribution | Fake breakouts likely
EXTREME GREED (76-100) + Bearish Order Flow @ Resistance
→ ★ AGGRESSIVE SHORTS | Size up 1.5x | Rapid reversals expected
💡 How To Use
Daily Workflow (Recommended):
Check indicator once per morning (pre-session)
Note the sentiment zone and action recommendation
Apply bias filter to your technical setups throughout the day
Size up positions at extremes when order flow confirms
For Futures Traders:
Use bar close mode (default) for stable daily bias
However, try and test live candle option , it might give you early insights
Check before London Open (6:00 AM ET)
Combine with order flow analysis (Body Close, sweeps, institutional levels)
For Stock Traders:
Use for sector rotation decisions
Extreme Fear = buy quality at your edge support level
Extreme Greed = trim positions, raise cash
For Crypto Traders:
Crypto mode captures equity risk sentiment spillover
VIX spikes = crypto dumps (size shorts)
Safe haven demand = BTC correlation tracking
🔧 Technical Details
Data Sources: Universal TradingView symbols (SP:SPX, TVC:VIX, TVC:US10Y, AMEX:HYG, AMEX:LQD, INDEX breadth data with fallback proxies)
Calculation: Seven components normalized over 252-day period, weighted by market mode, combined into 0-100 composite index
Accuracy: 85-90% zone correlation to CNN Fear & Greed Index (zones matter more than exact numbers for trading bias)
Update Frequency: User-controlled - bar close (stable) or live (real-time)
Compatibility: Works on any chart timeframe (recommend daily for bias context)
🎓 Best Practices
DO:
Use as bias filter for your existing strategy
Check once per session for daily context
Size up at extremes with order flow confirmation
Pay attention to ZONES (Extreme Fear/Greed) not exact numbers
Combine with technical analysis and price action
DON'T:
Use as standalone entry/exit signals
Overtrade or force setups when neutral
Ignore price action because sentiment contradicts
Check constantly (designed for daily bias, not tick-by-tick)
Expect exact CNN number match (focus on zones)
🏆 Who Is This For?
Futures Traders - ES/NQ intraday traders needing daily bias context
Stock Traders - Equity swing traders and stock pickers
Crypto Traders - BTC/ETH traders following equity risk sentiment
Position Traders - Anyone wanting institutional sentiment context
Systematic Traders - Adding sentiment filter to mechanical systems
📚 Based On CNN Fear & Greed Methodology
This indicator builds upon CNN Business's proven Fear & Greed Index framework, enhancing it with:
Market-specific component weighting (Futures/Stocks/Crypto)
Actionable trading recommendations with position sizing
Institutional market context and framing
Flexible display options for different trading workflows
Universal data compatibility for all TradingView users
Atilla Bollinger Squeeze EMA Intelligence PanelIndicator Description (English)
Atilla – Bollinger Squeeze + EMA Intelligence Panel is a trend-following and breakout-detection indicator designed to help traders avoid fake signals and emotional overtrading.
This indicator combines Bollinger Band Squeeze logic, EMA structure analysis, and trend intelligence filters to identify:
Low-volatility squeeze zones
Real trend expansions
EMA-based continuation vs. fake reversals
🔍 Core Features
Bollinger Band Squeeze Detection
Identifies extreme volatility compression
Highlights potential breakout zones
Differentiates between tight squeeze and normal consolidation
EMA Intelligence System
EMA slope and stretch analysis
Detects when EMA is trending, flat, or overstretched
Helps filter false EMA cross signals
Trend Context Awareness
Designed to work with trend-following strategies
Avoids signals during choppy, sideways markets
Supports EMA-based systems (9–21, 8–13, 21–50, etc.)
Noise Reduction
Prevents entering trades during low-quality market conditions
Focuses on momentum-backed moves only
🎯 Who Is This Indicator For?
Trend traders
EMA crossover traders
Breakout traders
Traders who want to avoid fake moves and stop hunts
Traders who prefer confirmation over prediction
⚠️ Important Notes
This indicator is not a buy/sell signal generator
Best used as a confirmation and filtering tool
Works especially well on 15m, 30m, and 1H timeframes
Always use proper risk management
🧠 Trading Philosophy
“The goal is not to trade more,
but to trade only when the market is ready.”
If you want, I can also:
write a shorter minimalist description
add a professional disclaimer
optimize wording for TradingView Popular Scripts
On Chart ATR DisplayShows the ATR (Average True Range) on the chart.
Can position in different places
Can change the period from 30 to 1 days
Apex ICT: Proximity & Delivery FlowSimple Description: This indicator is a specialized ICT execution tool that automates the identification of Order Blocks, Fair Value Gaps, and Changes in State of Delivery (CISD). Unlike standard indicators that clutter the screen, this script uses a Proximity Logic Engine to ensure you only see tradeable levels. It automatically purges old data (50-candle CISD limit) and deletes mitigated zones the moment they are breached, leaving you with a clean, institutional-grade chart.
MU CHAI [Platinum Logic + Labels]MU CHAI
This script is developed as a technical analysis assistance tool designed to identify potential trade setups using advanced volatility and trend logic. It aims to streamline the analysis process by visualizing market structure and risk management parameters.
Key Features:
📊 Trend Analysis: Identifies potential Long & Short scenarios based on market momentum.
📐 Risk Management: Automatically calculates a recommended Stop Loss (SL) based on market volatility (ATR) and Trend Strength (ADX) to adapt to changing market conditions.
🎯 Reward Planning: Projects a Take Profit (TP1) level at a 1.5 Risk-to-Reward ratio relative to the dynamic SL.
🧲 Liquidity Zones (Magnet): Highlights potential price targets based on pivot structures and historical liquidity areas.
⚠️ IMPORTANT DISCLAIMER:
For Educational Purposes Only: This indicator is strictly a tool for technical analysis and educational use. It is NOT a signal service or a "get rich quick" scheme.
No Financial Advice: The information provided by this script does not constitute financial advice, investment recommendations, or a solicitation to buy or sell any assets.
Risk Warning: Trading financial markets (especially Gold/XAUUSD) involves a high level of risk and may not be suitable for all investors. You could lose some or all of your invested capital.
No Guarantees: Past performance of this indicator does not guarantee future results. Market conditions can change rapidly.
User Responsibility: All trading decisions are made solely by the user. The author assumes no liability for any losses incurred while using this tool.
MU CHAI [Platinum Logic System]TITAN CAPITALTH
This script is developed as a technical analysis assistance tool designed to identify potential trade setups using advanced volatility and trend logic. It aims to streamline the analysis process by visualizing market structure and risk management parameters.
Key Features:
📊 Trend Analysis: Identifies potential Long & Short scenarios based on market momentum.
📐 Risk Management: Automatically calculates a recommended Stop Loss (SL) based on market volatility (ATR) and Trend Strength (ADX) to adapt to changing market conditions.
🎯 Reward Planning: Projects a Take Profit (TP1) level at a 1.5 Risk-to-Reward ratio relative to the dynamic SL.
🧲 Liquidity Zones (Magnet): Highlights potential price targets based on pivot structures and historical liquidity areas.
⚠️ IMPORTANT DISCLAIMER:
For Educational Purposes Only: This indicator is strictly a tool for technical analysis and educational use. It is NOT a signal service or a "get rich quick" scheme.
No Financial Advice: The information provided by this script does not constitute financial advice, investment recommendations, or a solicitation to buy or sell any assets.
Risk Warning: Trading financial markets (especially Gold/XAUUSD) involves a high level of risk and may not be suitable for all investors. You could lose some or all of your invested capital.
No Guarantees: Past performance of this indicator does not guarantee future results. Market conditions can change rapidly.
User Responsibility: All trading decisions are made solely by the user. The author assumes no liability for any losses incurred while using this tool.
BOS/CHoCH Impulsive Move Detector #12Updated exit logic to measure at candle close vs candle wicks. Added session PnL/hr and implemented a FAST identifier that tracks impulse moves >= 10% <=3 hrs.
Jake's Candle by Candle UpgradedJake's Candle by Candle Upgraded
The "Story of the Market" Automated
This is not just another signal indicator. Jake's Candle by Candle Upgraded is a complete institutional trading framework designed for high-precision scalping on the 1-minute and 5-minute timeframes.
Built strictly on the principles of Al Brooks Price Action and Smart Money Concepts (SMC), this tool automates the rigorous "Candle-by-Candle" analysis used by professional floor traders. It moves beyond simple pattern recognition to read the "Story" of the market—Context, Setup, and Pressure—before ever allowing a trade.
The Philosophy: Why This Tool Was Built
Most retail traders fail for two reasons:
Getting Trapped: They enter on the first sign of a reversal (H1/L1), which is often an institutional trap.
Trading Chop: They bleed capital during low-volume, sideways markets.
This tool solves both problems with an Algorithmic Discipline Engine. It does not guess. It waits for the specific "Second Leg" criteria used by institutions and physically disables itself during dangerous market conditions.
Key Features
1. The Context Dashboard (HUD)
A professional Heads-Up Display in the top-right corner keeps you focused on the macro picture while you scalp.
FLOW: Monitors the 20-period Institutional EMA. (Green = Bull Flow, Red = Bear Flow). You are prevented from trading against the dominant trend.
STATE: A built-in "Volatility Compressor." If it says "⚠️ CHOP / RANGE", the algorithm is disabled. It protects you from overtrading during lunch hours or low-volume zones.
SETUP: Live tracking of the Al Brooks leg count. It tells you exactly when the algorithm is "Waiting for Pullback" or "Searching for Entry."
2. Smart "Trap Avoidance" Logic (H2/L2)
This tool uses the "Gold Standard" of scalping setups: The High 2 (H2) and Low 2 (L2).
It ignores the first breakout attempt (Leg 1), acknowledging it as a potential trap.
It waits for the pullback and only signals on the Second Leg, statistically increasing the probability of a successful trend resumption.
3. Volatility-Adaptive Risk Management
Stop calculating pips in your head. The moment a signal is valid, the tool draws your business plan on the chart:
Stop Loss (Red Line): Automatically placed behind the "Signal Bar" (the candle that created the setup) based on strict price action rules.
Take Profit (Green Line): Automatically projected at a 1.5 Risk-to-Reward Ratio.
Smart Adaptation: The targets expand and contract based on real-time market volatility. If the market is quiet, targets are tighter. If explosive, targets are wider.
4. The "Snap Entry" Signal
The BUY and SELL badges are not lagging. They are programmed with "Stop Entry" logic—appearing the exact moment price breaks the structure of the Signal Bar, ensuring you enter on momentum, not hope.
How to Trade Strategy
Check the HUD: Ensure FLOW matches your direction and STATE says "✅ VOLATILE".
Wait for the Badge: Do not front-run the tool. Wait for the BUY or SELL badge to print.
Set Your Orders: Once the signal candle closes:
Place your Stop Loss at the Red Line.
Place your Take Profit at the Green Line.
Walk Away: The trade is now a probability event. Let the math play out.
Technical Specifications
Engine: Pine Script v6 (Strict Compliance).
Best Timeframes: 1m, 5m.
Best Assets: Indices (NQ, ES), Gold (XAUUSD), and high-volume Crypto (BTC, ETH).
NY Open Candle IndicatorThe NY Open Candle Indicator identifies significant opening range activity at the New York stock market open.
It highlights the 09:30–09:45 EST 15-minute candle when its range (high - low) exceeds a user-defined percentage of the daily ATR (default 25%).
- Bullish wide-range candles are colored green
- Bearish wide-range candles are colored red
A small table displays:
- Current Daily ATR
- The threshold value (user % of ATR in price terms)
An alert condition is included — create an alert for "Wide NY Open Range Detected" to get notified when a qualifying candle closes.
Perfect for traders watching opening range breakouts, volatility expansion, or momentum at the NY open.
Requirements:
- Use on 15-minute timeframe
- Set chart timezone to America/New_York
Enjoy!
Opening Candle Continuation SamBerg_Opening Candle Continuation is a New York session–based trading indicator designed to structure the open and identify high-probability continuation moves.
The script builds an Opening Window from the NY open (default 9:30–16:00, configurable) and plots:
Opening High / Low levels
Optional Midline (HL2)
A real-time opening range box with directional context
Clean breakout continuation signals above or below the opening range
Key features
Configurable opening window length (5–120 minutes)
Optional close confirmation, minimum range filter, and ATR filter
Directional bull / bear window shading
Edgeful 30-minute follow-through statistics by weekday (optional)
Compact info table with opening range metrics
Optional NY Session VWAP
Fully customizable colors and display controls
Designed for intraday index futures and equities, this tool helps traders stay aligned with the session structure and avoid low-quality trades near the open.
Educational and analytical tool only. Past performance does not guarantee future results.
777 mean reversion engineA guy asked his librarian if they had any books on "paranoia." She leaned in and whispered, "They're right behind you." He hasn't been back to the library since.
Wolf 2.v1 [Trend & Pullback]Wolf 2.v1 — Trend & Pullback Trading Indicator
//You can disable the Pullback signals in the settings. I will continue improving and updating the indicator over time. The Trend logic is already working perfectly.
Wolf 2.v1 is a trend-following indicator with optional pullback entries, designed for clean trend trading and structured risk management.
How it works:
• The main trend is detected using a 6-EMA ribbon (EMA 30–60)
• Trend Buy appears when all EMAs align upward
• Trend Sell appears when all EMAs align downward
Pullback logic (PB Buy / PB Sell):
• Pullback signals appear only after a confirmed trend signal
• PB trades are taken strictly in the direction of the active trend
• Price must pull back toward selected EMAs and remain above (or below) EMA60
• Optional risk-reward filter (RR ≥ 2) for higher-quality setups
• Pullback signals can be enabled or disabled in the settings
• Each new PB signal automatically removes previous PB levels to keep the chart clean
Trade visualization:
• Automatic Entry, Stop-Loss, and up to 4 Take-Profit levels
• Separate SL logic for Trend and Pullback trades
• Clear BUY / SELL and PB labels directly on the chart
Extras:
• Multi-Timeframe trend dashboard
• Non-repainting signals
• Suitable for Forex, Gold, and Crypto markets
Best used on M15–H1 timeframes during strong trends.
Quantum RCI FusionDescription:
Overview: The Quantum Momentum Engine Quantum RCI Fusion is a sophisticated momentum oscillator designed to solve the #1 problem of classic indicators: false signals in sideways markets. At the core of this script is the Rank Correlation Index (RCI), a powerful statistical tool based on Spearman’s correlation. Unlike RSI or Stochastic which only look at price levels, the RCI evaluates the "quality" of a trend by measuring the temporal correlation of price ranks.
This script is not just a line drawing: it is a complete trading ecosystem that fuses three RCI timeframes, volatility filters, and a real-time Risk Management simulation.
🛠 How It Works: The "Fusion" Logic
The strength of this indicator lies in the synergy between its components. It is not a simple mashup, but a filtered logical system:
Triple RCI Engine (Fast, Mid, Slow):
Fast (13) & Mid (18): These generate the Crossover signal for precise entry timing.
Slow (30) - The "Trend Shield": The true innovation. It acts as a directional shield; if the baseline is bullish, the script protects Long positions by ignoring premature exit signals, allowing you to ride the full trend.
HMA Smoothing: Raw price data passes through a Hull Moving Average before the RCI calculation. This drastically reduces market "noise" without sacrificing the responsiveness typical of the RCI.
Intelligent Filters (Anti-Whipsaw):
ADX Integration: Signals are blocked if the ADX is below the threshold (default 20), preventing trading in flat/ranging markets.
Momentum Impulse: Requires a minimum variation (Delta) in the RCI to confirm that the move has real drive and is not just random fluctuation.
🛡 Risk Management & Simulation
Since timing is useless without risk management, Quantum RCI Fusion includes a Dashboard and sophisticated exit logic:
Multiple Exits:
Take Profit / Stop Loss: Based on dynamic ATR multipliers.
Shield Break: Safety exit if the underlying trend (Slow RCI) changes direction.
Emergency: Immediate close if momentum sharply reverses across the zero line.
Live Dashboard: Monitors Win Rate, virtual PnL, and Trade Status (Long/Short/Scanning) in real-time directly on the chart, removing the need for external backtesters.
🚀 How to Use It
Setup: Add the script to a separate pane below your price chart.
Entry Signals:
LONG (Green Triangle): RCI Fast crosses Mid upwards + Oversold Zone (< -80) + ADX > 20 + Bullish Shield.
SHORT (Red Triangle): RCI Fast crosses Mid downwards + Overbought Zone (> 80) + ADX > 20 + Bearish Shield.
Customization:
Scalping: Reduce RCI lengths (e.g., 8/12/20) and disable the "Trend Shield" for quick entries and exits.
Swing Trading: Keep defaults and use the ATR Trailing logic to manage positions on H4 or Daily timeframes.
⚖️ Notes & Credits
Originality: This script enhances the standard RCI by implementing Array-based calculations (optimized for Pine v6), proprietary HMA smoothing, and unique "Trend Shield" logic.
Open Source: The code is released under the MPL 2.0 license. Credits to the Pine community for the foundational mathematical formulas of Spearman's correlation.
Disclaimer: The statistics shown in the dashboard are simulations based on live data and do not guarantee future profits. You are responsible for your own trading decisions.
🖼 Instructions for the Publication Chart (Preview)
To ensure your script gets approved and attracts users, follow these steps for the cover image:
Symbol: Use a volatile and liquid asset, e.g., BTCUSD or XAUUSD (Gold), on a 1H or 4H timeframe.
Clean Layout: Remove all other indicators from the chart (no Moving Averages on price, no Bollinger Bands). The focus must be solely on your script in the bottom pane.
Visualization:
Ensure the Dashboard (stats table) is clearly visible and does not obscure the most recent candle.
The chart should show at least one clear BUY and one clear SELL signal, ideally with the exit icons (the "X" or flags) visible to demonstrate the exit logic.
Weekly ATR 8W Contraction (35%)to identify the reduction in average true range of the stock . there by identifying the compression
ORB with Range Context📌 What This Indicator Does
This indicator plots the Opening Range (OR) — the high and low established during a user-defined session window at market open — and provides context on the range's significance by comparing it to recent volatility.
After the opening range session completes, the indicator displays:
• ORB High and Low as horizontal reference levels
• Optional Midline (often acts as intraday support/resistance)
• Target projections at customizable multiples when breakout occurs
• Range Quality classification (Narrow / Normal / Wide)
🔬 How It Works
Step 1: Opening Range Capture
During the session window (default: 09:15–09:20 IST for Indian markets), the indicator tracks the highest high and lowest low. These become the day's Opening Range boundaries.
Step 2: Range Quality Analysis
This is where this indicator differs from standard ORB tools. It compares today's range to the instrument's Average True Range (ATR) and classifies it:
• NARROW — Range is less than 0.5× ATR
Interpretation: Price compression. The market opened in a tight range relative to recent volatility. Compression often precedes expansion — breakouts from narrow ranges can be more directional.
• NORMAL — Range is between 0.5× and 1.2× ATR
Interpretation: Typical opening behavior. Standard breakout expectations apply.
• WIDE — Range is greater than 1.2× ATR
Interpretation: The market opened with unusual volatility — possibly due to gaps, news events, or overnight developments. Wide ranges may indicate that much of the day's move has already occurred.
Step 3: Breakout Detection
A breakout is confirmed when price closes beyond the ORB High or Low (not just wicks through). The indicator tracks the first breakout direction each day.
Step 4: Target Projection
On confirmed breakout, targets are calculated using the ORB range as the measurement unit:
• Target 1 = Breakout Level ± (Range × 1.0)
• Target 2 = Breakout Level ± (Range × 1.5)
• Target 3 = Breakout Level ± (Range × 2.0)
⚙️ Settings Guide
Opening Range Settings
• ORB Session Window — Time window for capturing the range. Default: 0915-0920 (first 5 min for NSE/BSE) or 0915-10:00(first 45 mins for NSE/BSE. US Markets: 0930-0935 or 0930-0945.
• Show Midline — Toggle the range midpoint display
Target Projection
• Target 1/2/3 (x Range) — Multipliers for profit targets. Default values (1.0, 1.5, 2.0) follow classical ORB methodology.
Range Quality Analysis
• ATR Period — Lookback for ATR calculation (default: 14)
• Narrow Threshold — Ranges below this ATR multiple are classified as narrow (default: 0.5)
• Wide Threshold — Ranges above this ATR multiple are classified as wide (default: 1.2)
📈 How to Use This Indicator
1. Apply to an intraday chart (1-min to 5-min recommended)
2. Wait for the ORB session to complete — levels appear after the time window ends
3. Check Range Quality in the info panel
4. Watch for breakout confirmation — price must close beyond ORB High or Low
5. Use projected targets for trade management
💡 Practical Tips
• Narrow Range Days: Often produce cleaner breakout trades. Tight opening suggests indecision that typically resolves directionally.
• Wide Range Days: If range exceeds 1.5× ATR, consider whether the instrument has already made its daily move.
• Midline Usage: After breakout, the midline often acts as a pullback level for re-entry or confirmation.
📊 Why Range Quality Matters
Most ORB indicators plot static levels without context. A 100-point range on NIFTY might be significant on a quiet day but trivial on a volatile day.
By normalizing against ATR, this indicator answers: "Is today's opening range tight or loose relative to what this instrument normally does?"
This helps traders:
• Calibrate profit expectations
• Assess risk appropriately
• Avoid mechanical trading without market context
🔔 Alerts Available
• ORB Bullish Breakout
• ORB Bearish Breakout
• Target 1 Hit
• Target 2 Hit
⚠️ Notes
• Works on intraday timeframes only
• Best suited for liquid instruments with defined opening sessions
• Range Quality is contextual guidance, not a standalone signal
• Always use appropriate risk management
ADR% Ext MAThis indicator is designed for aggressive short-term momentum swing traders who want to filter out "dead money" and avoid chasing extended stocks. It helps you objectively measure velocity (ADR%) and risk (Extension from 50MA) to identify the hottest setups before they become overextended.
The core philosophy behind this script is simple:
Velocity: We only want stocks that move fast enough to reward us quickly.
Safety: We want to enter near the "launchpad" (50SMA), not when the move is already stretched.
Timing: We want to ensure the stock hasn't already used up its daily fuel.
Key Features
1. ADR% (Average Daily Range %)
Concept: Measures the velocity of the stock.
Function: Calculates the average daily percentage move over a set period (default 20 days).
Logic: If a stock's ADR is too low (e.g., < 3%), it is considered "dead money" and ignored. The indicator highlights the background in BLUE only when the ADR% meets your minimum threshold.
2. Extension from 50 SMA (measured in ATR)
Concept: Measures how stretched the price is from its trend baseline.
Function: Calculates the distance between the Close and the 50 SMA, expressed as multiples of ATR.
Logic: High momentum plays require a base. If the price is extended more than 4x ATR from the 50 SMA, the risk/reward is skewed (rubber band effect). The blue highlight turns off if the price is too extended.
3. Daily Range Used (Intraday Timing)
Concept: Measures how much of the expected daily move has already happened today.
Function: Compares the current day's range (High - Low) against the ATR.
Display: Used: ATR x 0.50 means the stock has only moved 50% of its average range. If it exceeds 1.0 (100%), the text turns RED, warning you that the move might be exhausted for the day.
Visual Guide
Blue Background Highlight: The "Green Light" zone. It appears only when:
ADR% is high enough (High Momentum).
Price is above 50 SMA (Up Trend).
Price is NOT overextended (Safe Entry Zone).
Dashboard Box (Top Right):
ADR: Shows the raw velocity percentage.
Ext: Shows extension from 50SMA in ATR multiples. (Turns RED if > 4.0).
Used: Shows intraday range consumption. (Turns RED if > 1.0).
MA: Displays the 50 SMA value.
Settings
ADR Length & Threshold: Customize the lookback period and minimum % required (Default: 3%).
Extension Limit: Set the maximum ATR multiple allowed from the 50 SMA (Default: 4x).
Visuals: Customize text size and box position.
Disclaimer: This tool is for educational purposes and trend analysis only. Always manage your risk.
BB6-MTF-OverlayBB6-MTF-Overlay (Multi-Bollinger Bands, MTF, Overlay)
BB6-MTF-Overlay is a Bollinger Bands overlay indicator that lets you display up to 6 independent BB sets on a single chart, with full MTF (higher timeframe) support.
It’s designed for fast multi-timeframe context—so you can see where price is relative to higher-timeframe BB levels (middle / ±1σ / ±2σ / ±3σ) while trading your current timeframe.
Key Features
Up to 6 Bollinger Band sets displayed simultaneously (overlay)
Per BB set: choose Local (current TF) or MTF (higher TF via security)
Per BB set: Gaps ON/OFF
ON: values may appear only at HTF update points (discontinuous)
OFF: HTF values are filled across lower TF bars (step-like)
Per BB set: Confirmed Bars Mode ON/OFF
ON: uses confirmed HTF values (minimizes repainting)
OFF: follows the in-progress HTF bar (useful for discretionary trading)
Per BB set: toggle visibility for Middle / ±σ1 / ±σ2 / ±σ3 independently
Custom sigma multipliers (e.g., 1.5σ, 0.6σ) for fine tuning
Separate switches for Calculation ON/OFF and Display ON/OFF
Turn off calculations to reduce load, or hide plots only
Typical Use Cases
Use higher timeframe (4H/D/W) BB middle and ±1σ as “structure walls” while executing on lower timeframe
Combine real-time tracking (e.g., 15m BB with Confirmed OFF) with stable HTF anchors (e.g., Daily/Weekly with Confirmed ON)
Keep ±2σ/±3σ OFF by default and enable them only when you need to check range expansion or extremes
Default Preset (Initial Settings)
BB1: 15m MTF (Confirmed Bars Mode OFF)
BB2: 4H MTF (Confirmed Bars Mode OFF)
BB3: Daily MTF (Confirmed Bars Mode ON)
BB4: Weekly MTF (Confirmed Bars Mode ON)
BB5: Monthly MTF (Confirmed Bars Mode ON)
BB6: Calculation OFF / Display OFF
For all active BB sets: σ1 ON by default, σ2 & σ3 OFF by default
Notes
With MTF + Confirmed OFF, band values will move until the higher timeframe bar closes (intended for discretionary use).
If the chart looks too busy, disable unused BB sets or turn off σ2/σ3.
📌 BB6-MTF-Overlay（ボリンジャーバンド6本・MTF対応・Overlay）
BB6-MTF-Overlay は、最大6セットのボリンジャーバンドを同時にチャート上へ重ねて表示できる、MTF（上位足参照）対応のBollinger Bandsインジケーターです。
🕒 15分／4時間／日足／週足／月足など、複数時間軸のボリンジャーを1つのチャートで確認できるため、環境認識（上位足の位置関係）＋現在足の判断をスムーズに行えます。
✨ 主な特徴
📈 最大6本のボリンジャーバンドを同時表示（Overlay）
🔁 各BBごとに Local（現在足） / MTF（上位足） を選択可能
🧩 各BBごとに ギャップON/OFF（上位足更新点のみ表示／階段状に埋める表示）を切替
✅ 各BBごとに 確定足モードON/OFF
ON：上位足確定値（リペイント最小）
OFF：進行中の上位足にも追随（裁量補助向け）
🎚️ 各BBごとに ミドル／±σ1／±σ2／±σ3 を個別に表示ON/OFF
🔧 σ値は自由入力（例：1.5σ、0.6σ など微調整可）
⚙️ 計算ON/OFFと表示ON/OFFを分離
表示だけ消す／計算ごと止めて軽くする、の両方に対応
🧠 想定する使い方（例）
🧱 上位足（4H/日足/週足）のミドル・±1σを「壁」として見て、今の足（5分/15分）での反発・抜けを判断
🏃 「15分BB（確定足OFF）」でリアルタイム追随しつつ、「日足/週足（確定足ON）」で大局の位置を固定して確認
🔍 σ2・σ3は普段OFF、必要なときだけONにしてレンジ幅・伸び代を確認
🧾 デフォルト設定（初期状態）
1️⃣ BB1：15分MTF（確定足モードOFF）
2️⃣ BB2：4時間MTF（確定足モードOFF）
3️⃣ BB3：日足MTF（確定足モードON）
4️⃣ BB4：週足MTF（確定足モードON）
5️⃣ BB5：月足MTF（確定足モードON）
6️⃣ BB6：計算OFF／表示OFF
🎛️ 初期表示は全BB共通で「1σのみON（2σ・3σはOFF）」
⚠️ 注意事項
🔄 MTFで「確定足モードOFF（追随）」を使用する場合、上位足が確定するまで値が動くため、見え方が変化します（裁量補助向け）。
🧹 表示本数が増えるとチャートが混み合うため、必要なBBだけ表示ONにする運用がおすすめです。
