เริ่มกันเลย

การวิเคราะห์แนวโน้ม

Supertrend + MACD + HMAIndicator Description: Supertrend + MACD + HMA General Summary It is a composite technical indicator that combines three analysis tools to generate buy and sell signals in institutional trading. It uses confirmation from multiple indicators to increase the precision of market entries. Components 1. Supertrend (ST) Function: Identifies the main market trend (bullish or bearish) Parameters: ATR Length 10, Factor 3.0 Visualization: Green line = Bullish trend Red line = Bearish trend Semi-transparent green/red background that fills the area according to direction How it works: Uses ATR (Average True Range) to calculate dynamic support and resistance bands 2. MACD (Moving Average Convergence Divergence) Function: Measures price momentum and direction Parameters: Fast 18, Slow 144, Signal Smoothing 9 Components: MACD Line (orange): Difference between two EMAs Signal Line (purple): EMA of the MACD Histogram (green/red columns): Difference between MACD and its signal Green = Positive histogram (bullish momentum) Red = Negative histogram (bearish momentum) 3. HMA 100 (Hull Moving Average) Function: Identifies support/resistance level and price direction Parameters: Length 100 Visualization: Blue thick line Characteristics: Less lag than traditional moving averages Price > HMA = Bullish trend Price < HMA = Bearish trend Signal Logic 🟢 BUY SIGNAL Generated when ANY of these conditions is met: Total Confluence: MACD positive (histogram > 0) Price above HMA 100 Supertrend in Bullish mode Supertrend Change: Supertrend changes from Bearish to Bullish MACD remains positive Price above HMA Price Crossover: Price crosses above HMA (at candle close) Supertrend is in Bullish mode MACD is positive 🔴 SELL SIGNAL Generated when ANY of these conditions is met: Total Confluence: MACD negative (histogram < 0) Price below HMA 100 Supertrend in Bearish mode Supertrend Change: Supertrend changes from Bullish to Bearish MACD remains negative Price Crossover: Price crosses below HMA (at candle close) Supertrend is in Bearish mode MACD is negative Important Features ✅ Single Signal Per Type Once a BUY is generated, no other BUY is generated until a SELL appears Avoids multiple entries in the same direction ✅ Crossover Detection The indicator generates signals at candle close when price crosses HMA Allows capturing quick market moves ✅ Trend Changes Detects when Supertrend changes direction Provides early exits from the market ✅ Automatic Alerts Push notifications when BUY or SELL is generated Ideal for automated trading
อินดิเคเตอร์ Pine Script®
โดย julioperez75955
Moving Average Channel Breakout (No Repaint) This indicator creates a channel using two simple moving averages: SMA of highs (upper line) and SMA of lows (lower line). How it works: - When a candle closes above the upper channel line, the following candles turn green (bullish trend) - When a candle closes below the lower channel line, the following candles turn red (bearish trend) - The trend color remains until a breakout in the opposite direction occurs Anti-repaint: This indicator does NOT repaint. The candle color is determined at the open, based on the previous candle's close. Once a candle opens with a color, that color never changes. Breakout strategy: - Candle opens green → Long entry signal - Candle opens red → Short entry signal The signal and entry moment are perfectly synchronized at the candle open, making it ideal for systematic breakout strategies.
อินดิเคเตอร์ Pine Script®
โดย Pedro_Romao
HMA 34 Dual-Fractal Projections - VdubusVdubus MacD Divergence Trend Break Signal Generator :Here:- HMA 18 Dual-Fractal Projections Overview The HMA 18 Dual-Fractal Projections is a technical analysis tool designed to identify market structure and potential breakout patterns by analyzing the pivots of a Hull Moving Average (HMA). Unlike standard trendline indicators that struggle to balance "big picture" trends with immediate price action, this indicator utilizes a Dual-Fractal approach. It simultaneously calculates two separate timelines—Macro and Micro—to visualize both the dominant channel and the developing chart patterns (such as wedges or triangles) in real-time. Visual Guide The indicator plots three key elements on the main chart: The HMA Line (Blue): A smooth, fast-acting moving average (default length 34) that serves as the baseline for all calculations. Macro Structure (Solid, Thick Lines): Red (Solid): Major Resistance. Green (Solid): Major Support. Purpose: Identifies the long-term trend channel. These lines react slowly and filter out noise. Micro Structure (Dashed, Thin Lines): Red (Dashed): Immediate Resistance. Green (Dashed): Immediate Support. Purpose: Identifies the short-term market structure. These lines react quickly to show forming wedges, triangles, or flags. How It Works The indicator applies a "Pivot High/Low" algorithm directly to the HMA data rather than raw price data. This filters out candle wicks and volatility, ensuring lines are drawn based on established momentum shifts. Layer 1 (Macro): Uses a large "Lookback" period (default 44 bars) to find significant peaks and valleys. It connects the most recent major pivot to the previous one, projecting a line forward to show where the major trend channel lies. Layer 2 (Micro): Uses a small "Lookback" period (default 10 bars) to find local peaks and valleys. This allows you to see how price is behaving within the larger channel. Settings & Configuration HMA Settings HMA Length: The length of the Hull Moving Average. Default: 34 (Matches the "visually pleasing" setting from recent testing). Note: Set to 18 for a faster, more reactive baseline (scalping). Layer 1: Macro (Big Channel) Macro Lookback: Determines how many bars must pass before a peak is confirmed. Default: 44. High values find broad, established channels. Max Macro Lines: How many historical lines to keep on the chart. Default: 1 (Keeps the chart clean, showing only the current structure). Extend Macro Lines: Projects the lines infinitely to the right to predict future support/resistance zones. Layer 2: Micro (Current Pattern) Micro Lookback: A lower sensitivity setting to catch immediate structure. Default: 10. Low values will pinpoint the exact boundaries of small wedges or flags forming right now. Trading Strategy & Interpretation 1. The "Squeeze" (Wedge Identification) This is the primary use case. Look for scenarios where the Macro Lines (Solid) are wide/parallel, but the Micro Lines (Dashed) are rapidly converging (pointing towards each other). This indicates that while the main trend is intact, momentum is compressing. A breakout is imminent where the dashed lines intersect. 2. Trend Channels When both Solid and Dashed lines are roughly parallel and sloping in the same direction, the trend is healthy and strong. Price is respecting both the short-term and long-term momentum. 3. Divergence / Early Reversal Warning If the Macro Line is sloping UP, but the Micro Line starts sloping DOWN (crossing inside), it indicates a loss of momentum and a potential reversal before the price actually breaks the major trendline. =========================================================================== 2. Micro/Macro Cross Alert A new input, Enable Micro/Macro Cross Alert, has been added under the "Alerts & Features" section. This alert condition is triggered when the momentum of the Micro Structure exceeds the momentum of the Macro Structure, which is a high-probability signal for a breakout: Bullish Alert: The Micro High (dashed red line) crosses above the Macro High (solid red line). Bearish Alert: The Micro Low (dashed green line) crosses below the Macro Low (solid green line). To set up the actual alert on your chart: Right-click on the chart. Select "Add alert on HMA 34 Dual-Fractal Projections". In the Condition dropdown, select the indicator's name. For the main alert criteria, choose "Any alert()". Select your preferred alert actions (e.g., notification, email).
อินดิเคเตอร์ Pine Script®
โดย vdubus
Wick to Body Ratio TableHello, I'm Gomaa if don't know me and if you want to know more about me follow me on my social media accounts which my propose to teach people "How To Learn". Use this link so you can find me: linktr.ee Overview The "Wick to Body Ratio Table" is a comprehensive analytical tool designed to provide traders with detailed insights into candle structure and price movement dynamics. This indicator breaks down each candle into its component parts and displays real-time statistics in an easy-to-read table format. What It Does This indicator analyzes the current candle and displays four key metrics for each component: Ratio to Body - How large each wick is compared to the candle body Percentage of Total - What portion of the entire candle each component represents Move Percentage - The actual price movement as a percentage from the opening price Component breakdown - Upper wick, body, lower wick, and totals Key Features Real-Time Analysis: Updates automatically with every price tick on the current candle Works seamlessly across ALL timeframes (1 second to monthly charts) No lag or delay in calculations Comprehensive Metrics: Upper Wick: Shows rejection from higher prices and selling pressure Closed Body: Displays the actual price change from open to close (bullish=green, bearish=red) Lower Wick: Indicates rejection from lower prices and buying pressure Total Wick: Combined wick analysis for overall volatility assessment Whole Candle: Complete range from high to low with total movement percentage Visual Design: Color-coded rows for easy identification Clear headers for each metric column Positioned at top-right of chart (non-intrusive) Professional table format with borders and proper spacing How to Interpret the Data Ratio to Body Column: A ratio of 2.0x means that component is twice the size of the body N/A appears for doji candles (when body = 0) Higher ratios indicate stronger rejection or indecision % of Total Column: Shows what percentage each part contributes to the whole candle All percentages always add up to 100% Helps identify if price spent more time in wicks or body Move % Column: Calculated from the opening price Shows actual volatility during the candle period Example: 0.5% body with 3% total candle = high volatility but little net movement Trading Applications 1. Rejection Analysis: Long upper wicks at resistance = strong selling pressure Long lower wicks at support = strong buying pressure Wick-to-body ratios above 2:1 suggest significant rejection 2. Volatility Assessment: Compare body move % to whole candle move % Large difference indicates choppy price action Small difference indicates trending movement 3. Candle Patterns: Identify doji, hammer, shooting star patterns quantitatively Measure strength of pin bars and rejection candles Compare current candle structure to historical patterns 4. Market Sentiment: Body % > 70% = strong directional movement Wick % > 60% = indecision and rejection Balanced distribution = consolidation Settings & Customization Table position can be modified in the code (top_right, top_left, bottom_right, bottom_left) Colors can be adjusted for different components Text size can be changed (size.small, size.normal, size.large) Decimal precision can be modified in the str.tostring() functions Best Practices Use on higher timeframes (15m+) for more reliable signals Combine with support/resistance levels for context Look for extreme ratios (>3:1) for high-probability setups Monitor the move % to gauge true volatility vs. net movement Technical Details Written in Pine Script v5 Zero division protection built-in Handles all edge cases (gaps, doji, extreme wicks) Lightweight and efficient (minimal CPU usage)
อินดิเคเตอร์ Pine Script®
โดย gomaa199910
🚦 Divergence Indicator for The Saty PO by TenAMTraderTenAM’s Traffic Light Divergence Indicator for The Saty Phase Oscillator Overview: This tool is designed to automatically detect regular and hidden divergences on price using data sourced from The Saty Phase Oscillator. Divergences are displayed directly on the chart using a simple traffic-light visual system: 🟢 Bullish Divergence 🔴 Bearish Divergence 🟡 Hidden Divergence These markers highlight potential points of interest—not trade signals—based on the momentum behavior of the underlying oscillator relative to price. How to Use: Add The Saty Phase Oscillator to your chart. Then load “TenAM’s Traffic Light Divergence Indicator for The Saty Phase Oscillator.” IMPORTANT, In the indicator settings → Indicator Source, make sure you select: Saty Phase Oscillator → Phase Oscillator Set the indicator to plot on price (Settings → Style → "Overlay/Price"). Adjust detection preferences: Enable Regular, Hidden, or both divergence types. Configure Left and Right Pivot Lookbacks. Recommended starting point: Right = 3, Left = 1. Optimal values vary by timeframe and market—backtesting is encouraged. Modify the Max Lookback Range (default: 60) and Min Lookback Range (default: 0) to refine how far back divergence scanning occurs. Interpretation: These are not buy or sell signals. They simply highlight areas where momentum and price behavior diverge, helping you evaluate potential entry opportunities or exhaustion zones. Legal Disclaimer: This indicator is for informational and educational purposes only. It does not constitute financial advice, investment advice, or a recommendation to buy or sell any security. Trading involves significant risk, and past performance does not guarantee future results. Users are fully responsible for their own trading decisions and outcomes. The creator of this script assumes no liability for any losses or damages arising from its use.
อินดิเคเตอร์ Pine Script®
โดย TenAM_Trader
ProCrypto OI Candles (auto symbol) — by ruben_procryptoProCrypto OI Candles (Auto Symbol) visualizes Open Interest in a clear and intuitive way by converting OI data into candles and a smooth trendline. The script automatically detects the correct OI symbol based on the chart you are viewing, so there is no need to manually change OI tickers when switching between assets. 🔹 Key Features Automatic Symbol Detection The indicator automatically selects the appropriate Open Interest data source for the asset on your chart (BTC, SOL, ADA, DOGE, etc.). OI Candles Open Interest is displayed as candles to show whether market participation is increasing or decreasing on each bar. Multi-exchange Support Users can choose OI data from Binance, Bybit, or OKX. Any combination is supported. Smooth OI Trendline An optional EMA-based OI line provides a clear view of the underlying trend in trader activity. Delta Bars (optional) Highlights whether Open Interest expanded or contracted within the candle. 🔹 How to Interpret OI Typical relationships between price and OI: Price ↑ + OI ↑ → Trend continuation likely New positions entering the market. Price ↑ + OI ↓ → Short squeeze / weak move Shorts closing, not new longs opening. Price ↓ + OI ↑ → New shorts entering Often signals bearish pressure. Price ↓ + OI ↓ → Longs closing Can indicate capitulation or consolidation. These concepts help traders understand the strength or weakness behind a price move. 🔹 Inputs Choose exchange(s) for OI data Adjust candle opacity Enable/disable OI line Smoothing length for OI line Optional delta bars Range lookback for line offset All settings are customizable to suit different styles of analysis. 🔹 Notes Some assets may not have Open Interest data available on all exchanges. The indicator uses standard TradingView data sources via request.security(). No trading signals are generated; this script is a visualization tool only. 🔹 Author Created by ruben_procrypto for traders who analyze liquidity, Open Interest, and market participation.
อินดิเคเตอร์ Pine Script®
โดย Ruben_ProCrypto
NY 9:30-9:35 High/Low Range📘 Script Description This script automatically identifies and plots the high and low of the 5-minute candle formed between 9:30 AM and 9:35 AM New York time, which corresponds to the opening of the U.S. equity market. The goal is to provide a clear reference level for intraday volatility, directional bias, and breakout levels. 🔍 Function Overview ■ 1. Detects the 9:30–9:35 NY Time Candle The script converts chart timestamps into New York session time and automatically captures the 5-minute candle that forms between: NY 9:30:00 → NY 9:35:00 ■ 2. Automatically Draws Horizontal Lines After identifying the high and low of this candle, the script draws: High line → Red Low line → Blue Lines start exactly at the 9:30 timestamp Lines extend 3 hours into the future (until NY 12:30) Lines do not extend beyond 3 hours (prevents unwanted diagonal lines or lines from previous days) ■ 3. Label Display at NY 20:00 The script places a label at New York 20:00, marking: “9:30 High” for the high line “9:30 Low” for the low line This allows you to instantly identify the key reference levels at the end of the trading day. ■ 4. Auto-Removal at NY 20:00 At NY 20:00, both the lines and the labels are automatically deleted. No old lines remain on the chart, ensuring clarity and accuracy for each new trading day. 🎯 Purpose and Use Cases This script is highly useful for: Determining intraday direction after the NY open Tracking volatility spikes at the U.S. equity market open Identifying breakout levels Using high/low as dynamic support and resistance throughout the day Understanding market context during economic events or high-impact sessions The 9:30–9:35 range is one of the most watched price zones in global markets, often serving as the day’s initial liquidity sweep. 📝 Key Features Accurate New York time conversion Clean horizontal lines (no previous-day diagonal lines) Labels positioned clearly at NY 20:00 No unnecessary visuals—simple and effective Lightweight script with minimal chart impact
อินดิเคเตอร์ Pine Script®
โดย taka_fx7676
Session Dynamics & Pivot Overlay (Arjo)## **OVERVIEW** The **Session Dynamics & Pivot Overlay (Arjo)** is a visual analysis tool that displays session-based price ranges, anchored volume-weighted averages, daily pivot levels, and smoothed trend conditions on the chart. It highlights how price interacts with custom sessions, midpoint levels, and dynamic ranges, providing a structured visual layout that helps users observe market behavior over time without implying any form of prediction or trading signal. ## **CONCEPTS** This indicator incorporates several widely used analytical concepts: - **Session Ranges:** Identifies user-defined time windows and visually displays their high, low, and midpoint behavior throughout the session. - **VWAP (Morning Session):** Shows volume-weighted average price calculations for a defined morning period, assisting with visual comparison between price and weighted averages. - **Daily Pivot Levels:** Displays R1–R2, S1–S2, central pivot, and associated levels derived from prior daily price data. - **Trend Smoothing:** Uses SuperSmoother filtering and an additional EMA to highlight whether the smoothed trend is rising or falling. - **EMA + ATR Bands:** Plots a 20-period EMA with upper and lower ATR-derived bands to help visualize short-term price displacement relative to average true range. All of these elements are presented solely for structural and comparative chart analysis. ## **FEATURES** - **Custom Session Visualization:** Automatically draws session boxes, capturing the evolving high, low, and midpoint throughout the defined intraday window. - **Dynamic Midline Calculation:** A midpoint line is updated continuously during the session to visually anchor price within the session’s range. - **Morning Session VWAP:** Displays a dedicated VWAP line for the morning window with adjustable source and configuration options. - **Daily Pivot Lines:** Automatically plots pivot, BC/TC, R1–R2, and S1–S2 levels with customizable colors, widths, and line styles. - **Trend-Responsive Pivot Display:** Optionally toggles visibility of R2 or S2 depending on the direction of the smoothed trend. - **EMA + ATR Zones:** Renders a 20-EMA and ATR-based support/resistance zone using filled regions for enhanced visual clarity. - **Full Customization:** Multiple color, transparency, line-style, and display options allow users to adapt the presentation to their charting preferences. - **Overlay Compatible:** Designed to work directly on price charts without obstructing candles or other overlays. ## **HOW TO USE** Users can interact with the indicator entirely through the settings panel: - Adjust session timings to match preferred market hours or custom internal zones. - Enable or disable the display of pivot levels, VWAP, or the ATR/EMA zone. - Customize colors and line styles to improve visibility according to the chart background or personal preference. - Observe how price behaves relative to the session box, midpoint, VWAP, and pivot levels for contextual understanding. - Utilize the smoothed trend condition to see when the indicator chooses to display certain pivot extensions. These elements help users interpret chart structure, volatility, and intraday behavior in a visually organized manner. ## **CONCLUSION** The ** Session Dynamics & Pivot Overlay (Arjo) ** indicator offers a consolidated view of session structure, pivot levels, VWAP, and smoothed trend conditions. Its purpose is to improve visual clarity and assist users in understanding market context without issuing directives or trade suggestions. It functions as an educational tool that enhances chart interpretation and supports structured analysis. --- ## **DISCLAIMER** This indicator is for educational and visual analysis purposes only. It does not provide trading signals, financial advice, or guaranteed outcomes. Users should conduct their own research and consult a licensed financial professional when necessary. All trading decisions are solely the responsibility of the user. Happy Trading (Arjo)
อินดิเคเตอร์ Pine Script®
โดย ARJO_2019
FX OSINT - Institutional Midnight Intelligence For ForexFX OSINT — Institutional Midnight Intelligence For Forex See Your FX Charts Like an Intelligence Briefing, Not a Guess If you’ve ever stared at EURUSD or GBPJPY and thought: Where is the real liquidity? Is this move sponsored by smart money or just noise? Am I buying into premium or discount? …then FX OSINT is designed for you. FX OSINT (Forex Open Source Intelligence) treats the FX market the way an analyst treats an investigation: Collect open‑source signals from price, time, and volatility. Map out liquidity, structure, and sessions in a repeatable way. Present them in a clean, non‑cluttered dashboard so you can read context quickly. No rainbow spaghetti. No 12 indicators stacked on top of each other. Just structured information, midnight visuals, and a clear read on what the market is doing right now. Why FX OSINT Exists Many FX traders run into the same problems: Overloaded charts – multiple indicators fighting for space, none talking to each other. Signals with no context – arrows that ignore structure, sessions, and liquidity. Tools not tuned for FX – generic indicators that don’t care what pair you are on. FX OSINT brings this together into one FX‑focused framework that: Understands structure : BOS/CHOCH, swings, and trend across multiple timeframes. Respects liquidity : sweeps, order blocks, and FVGs with controlled visibility. Reads volatility & ADR : how far today’s range has developed. Knows the clock : London, New York, and key killzones. Scores confluence : a 0–100 engine that summarizes how much is lining up. FX OSINT is built for traders who want structured, institutional‑style logic with a disciplined, midnight‑themed UI —not flashing buy/sell buttons. 1. Midnight Dashboard — Top‑Right Intelligence Panel This panel acts as your compact “situation room”: CONFLUENCE — 0–100 score blending trend alignment, volatility regime, sessions, liquidity events, order blocks, FVGs, and ADR context. REGIME — Low / Building / Normal / Expansion / Extreme, driven by ATR relationships, so you know if you’re in chop, trend, or expansion. HTF / MTF / LTF TREND — Higher‑, medium‑, and current‑timeframe bias in one place, so you see if you are trading with or against the larger flow. ADR USED — How much of today’s typical range has already been consumed in percentage terms. PIP VALUE — Approximate pip size per pair, including JPY‑style pairs. Everything is bold, legible, and color‑coded, but the layout stays minimal so you can: Look once → understand the context. 2. Structure, BOS, CHOCH — Smart‑Money‑Style Skeleton FX OSINT tracks swing highs and lows, then shows how structure evolves: Trend logic based on evolving swings, not just a moving average cross. BOS (Break of Structure) when price expands in the direction of trend. CHOCH (Change of Character) when behavior flips and the market structure changes. Labels are selective, not spammy . You don’t get a tag on every minor wiggle—only when structure meaningfully shifts, so it’s easier to answer: "Are we continuing the current leg, or did something actually change here?" 3. Liquidity Sweeps, Order Blocks & FVGs — The OSINT Layer FX OSINT treats liquidity as a key information layer: Liquidity sweeps — Detects when price spikes through recent highs/lows and then snaps back, flagging potential stop runs. Order blocks — The last opposite candle before a displacement move, drawn as controlled boxes with limited lifespan to avoid clutter. Fair Value Gaps (FVGs) — Three‑candle imbalances rendered as precise zones with a cap on how many can exist at once. Under the hood, boxes are managed so your chart does not become a wall of old zones: // Draw Order Blocks with overlap prevention if isBullishOB and showOrderBlocks if array.size(obBoxes) >= maxBoxes oldBox = array.shift(obBoxes) box.delete(oldBox) newBox = box.new(bar_index , low , bar_index + obvLength, high , border_color = bullColor, bgcolor = bullColorTransp, border_width = 2, extend = extend.none) array.push(obBoxes, newBox) Box limits keep the number of zones under control. Borders and transparency are tuned so you still see price clearly. You end up with a curated liquidity map , rather than a chart buried under every level price has ever touched. 4. Volatility, ADR & Sessions — Time and Range Intelligence FX OSINT runs a Volatility Regime Analyzer and an ADR engine in the background: Volatility regime — Five states (Low → Extreme) derived from fast vs. slow ATR. ADR bands — Daily high/mid/low projected from the current daily open. ADR used % — How far today’s move has traveled relative to its typical range. On the time side: Asia, London, New York sessions are softly highlighted with a single active background to avoid overlapping colors. Killzones (e.g., London and New York opens) can be emphasized when you want to focus on where significant moves often begin. Together, this helps you answer: "What time is it in the trading day?" "How stretched are we?" "Is expansion just starting, or are we late to the move?" 5. ICT‑Style Add‑Ons — BOS/CHOCH, Premium/Discount, and Confluence For modern FX / ICT‑inspired workflows, FX OSINT includes: BOS / CHOCH labels — Clear structural shifts based on swings. Premium / Discount zones — 25%, 50%, 75% levels of the daily range, so you know if you are buying discount in an uptrend or selling premium in a downtrend. Confluence score — A single number summarizing how many conditions line up in the current context. Instead of replacing your plan, FX OSINT compresses your checklist into the chart: Structure Liquidity Session / Time Volatility / ADR Higher‑timeframe alignment When these agree, the dashboard reflects it. When they don’t, it stays neutral and lets you see the conflict. How To Use FX OSINT FX OSINT is not a signal bot. It is an information engine that organizes context so you can apply your own plan. A typical workflow might look like: Start on higher timeframes (e.g., H4/D1) to form directional bias from structure, volatility regime, and ADR context. Move to intraday timeframes (e.g., M15/H1) around your chosen sessions (London and/or New York). Look for confluence : HTF / MTF / LTF trends aligned. Price in discount for longs or premium for shorts. Recent liquidity sweep into a meaningful OB or FVG. Confluence score at or above a level you consider significant. Then refine entries using BOS/CHOCH on lower timeframes according to your own risk and execution rules. FX OSINT aims to make sure you do not enter a trade without seeing: Where you are in the day (ADR and sessions). Where you are in the volatility cycle (regime). Who currently appears in control (structure and trend). Which liquidity was just targeted (sweeps and zones). Design Choices and Scope FX OSINT was designed around a few clear constraints: FX‑focused — Logic and filters tuned for FX majors, minors, exotics, and metals. It is intended for FX markets, not for every possible asset class. Open‑source — The full Pine Script code is available so you can read it, learn from it, and adapt it to your own workflow if needed. Clear themes — Two main visual styles (e.g., dark institutional “midnight” and a lighter accent variant) with a focus on readability, not visual noise. Chart‑friendly — Panels use fixed areas, session highlights avoid overlapping, and boxes are capped/pruned so the chart remains usable. FX OSINT is for only Forex pairs, not anything else! Hope you enjoyed and remember your Open Source Intelligence Matters 😉! -officialjackofalltrades
อินดิเคเตอร์ Pine Script®
โดย officialjackofalltrades
Trend Tracer [AlgoAlpha]🟠 OVERVIEW This tool builds a two-stage trend model that reacts to structure shifts while also showing how strong or weak the move is. It uses a mid-price band (from the highest high and lowest low over a lookback) and applies two Supertrend passes on top of it. The first pass smoothens the basis. The second pass refines that direction and produces the final trail used for signals. A gradient fill between the two trails uses RSI of price-to-trail distance to show when price is stretched or cooling off. The aim is to give traders a simple way to read trend alignment, pressure, and early turns without guessing. 🟠 CONCEPTS The script starts with a mid-range basis. This is the average of the rolling highest high and lowest low. It acts as a stable structure reference instead of raw close or typical price. From there, two Supertrend layers are applied: • The first Supertrend uses a shorter ATR period and lower factor. It reacts faster and sets the main regime. • The second Supertrend uses a slightly longer ATR and higher factor. It filters noise, waits for confirmed continuation, and generates the signal line. The interaction between these trails matters. The outer Supertrend provides context by defining the broader regime. The inner Supertrend provides timing by flipping earlier and marking possible shifts. The gradient fill uses RSI of (close − supertrend value) to display when price stretches away from the trail. This shows strength, exhaustion, or compression within the trend. 🟠 FEATURES Bullish and bearish flip markers placed at recent highs/lows Rejection signals off the trend tracer line Alerts for bullish and bearish trend changes 🟠 USAGE Setup : Add the script to your chart. Timeframe is flexible; lower timeframes show more flips while higher ones give cleaner swings. Adjust Length to change how wide the basis range is. Use the two ATR settings and factors to match the volatility of the market you trade. Read the chart : When the refined trail (stv_) sits above price the regime is bearish; when below, it is bullish. The wide trail (stv) confirms the larger move. Watch the gradient fill: darker colors appear when price is stretched from the trail and lighter colors appear when the move is weakening. Flip markers ▲ or ▼ highlight the first clean shift of the refined trail. Settings that matter : Increasing the Main Factor slows main-trend flips and filters chop. Increasing the Signal Factor delays the timing trail but reduces noise. Shortening Length makes the basis more reactive. ATR periods change how sensitive each Supertrend pass is to volatility.
อินดิเคเตอร์ Pine Script®
โดย AlgoAlpha
10
Unchased Wick Detector and ReversalsThis indicator can be used to track unchased wick from previous pivot points. The idea is to visualise liquidity cluster and grab before a potential reversal. Unchased wick Visual: - White lines are protected highs or lows. - Gray lines are previous wicks where prices have passed through and where the prices did not reverse. Reversal window: Reversal window parameters define a period range (a min and a max bars) where the reversal is valid. The idea is that the reversal must be done in the couple bars right after the wick is chased (this event should stay short in time but you can adjust the period as you wish). By default the default, the window 1-5 bars (e.g., daily, during 1-5 days). Green color indicates a grab from a low and a reversal to the upside. Red color indicates a grab from a high and a reversal to the downside. Disclamer: Of course this indicator can lead to false reversal signals and must be combined with other data and must be careful to use it alone for opening any position. This indicator is a Alpha version let me know if any problem.
อินดิเคเตอร์ Pine Script®
โดย Wised123
1
Compression / ExpansionI created this Indicator to warn of compression and expansion so I could find the best area to trade I use it In conjunction with VWAP works on any timeframe and any asset where there is Volume The Indicator produces a Letter C at the Start of Compression and a Letter E at the Start of Expansion you can change the settings to your liking On the chart my Expansion is in Red and compression is is Blue use In Conjunction with your favorite Indicators for Confluence
อินดิเคเตอร์ Pine Script®
โดย boption4mzrj
Copper_to_Gold_Ratio by Zeche Cu/Au Ratio – LINES + LABELS is a clean, macro-oriented indicator built around the Copper/Gold price ratio — a well-known gauge of economic strength, market sentiment, and shifts between risk-taking and risk-aversion. The script calculates: the 120-day SMA of the Copper/Gold ratio the standard deviation over the same period the ±1σ, ±1.5σ, and ±2σ deviation bands automatic labels on the last bar for maximum clarity The design is minimalistic and visually optimized so users can quickly understand where the current ratio sits relative to long-term norms. The deviation zones help highlight moments when the market transitions into RISK-ON or RISK-OFF behavior. How to interpret the signals: Above +2σ → RISK-OFF environment (defensive tone, macro stress) Below −2σ → RISK-ON environment (increased risk appetite) ±1σ bands represent normal cyclical movements The SMA acts as the long-term equilibrium level
อินดิเคเตอร์ Pine Script®
โดย zeche13
SR & POI Indicator//@version=5 indicator(title='SR & POI Indicator', overlay=true, max_boxes_count=500, max_lines_count=500, max_labels_count=500) //============================================================================ // SUPPLY/DEMAND & POI SETTINGS //============================================================================ swing_length = input.int(10, title = 'Swing High/Low Length', group = 'Supply/Demand Settings', minval = 1, maxval = 50) history_of_demand_to_keep = input.int(20, title = 'History To Keep', group = 'Supply/Demand Settings', minval = 5, maxval = 50) box_width = input.float(2.5, title = 'Supply/Demand Box Width', group = 'Supply/Demand Settings', minval = 1, maxval = 10, step = 0.5) show_price_action_labels = input.bool(false, title = 'Show Price Action Labels', group = 'Supply/Demand Visual Settings') supply_color = input.color(color.new(#EDEDED,70), title = 'Supply', group = 'Supply/Demand Visual Settings', inline = '3') supply_outline_color = input.color(color.new(color.white,75), title = 'Outline', group = 'Supply/Demand Visual Settings', inline = '3') demand_color = input.color(color.new(#00FFFF,70), title = 'Demand', group = 'Supply/Demand Visual Settings', inline = '4') demand_outline_color = input.color(color.new(color.white,75), title = 'Outline', group = 'Supply/Demand Visual Settings', inline = '4') bos_label_color = input.color(color.white, title = 'BOS Label', group = 'Supply/Demand Visual Settings') poi_label_color = input.color(color.white, title = 'POI Label', group = 'Supply/Demand Visual Settings') swing_type_color = input.color(color.black, title = 'Price Action Label', group = 'Supply/Demand Visual Settings') //============================================================================ // SR SETTINGS //============================================================================ enableSR = input(true, "SR On/Off", group="SR Settings") colorSup = input(#00DBFF, "Support Color", group="SR Settings") colorRes = input(#E91E63, "Resistance Color", group="SR Settings") strengthSR = input.int(2, "S/R Strength", 1, group="SR Settings") lineStyle = input.string("Dotted", "Line Style", , group="SR Settings") lineWidth = input.int(2, "S/R Line Width", 1, group="SR Settings") useZones = input(true, "Zones On/Off", group="SR Settings") useHLZones = input(true, "High Low Zones On/Off", group="SR Settings") zoneWidth = input.int(2, "Zone Width %", 0, tooltip="it's calculated using % of the distance between highest/lowest in last 300 bars", group="SR Settings") expandSR = input(true, "Expand SR", group="SR Settings") //============================================================================ // SUPPLY/DEMAND FUNCTIONS //============================================================================ // Function to add new and remove last in array f_array_add_pop(array, new_value_to_add) => array.unshift(array, new_value_to_add) array.pop(array) // Function for swing H & L labels f_sh_sl_labels(array, swing_type) => var string label_text = na if swing_type == 1 if array.get(array, 0) >= array.get(array, 1) label_text := 'HH' else label_text := 'LH' label.new(bar_index - swing_length, array.get(array,0), text = label_text, style=label.style_label_down, textcolor = swing_type_color, color = color.new(swing_type_color, 100), size = size.tiny) else if swing_type == -1 if array.get(array, 0) >= array.get(array, 1) label_text := 'HL' else label_text := 'LL' label.new(bar_index - swing_length, array.get(array,0), text = label_text, style=label.style_label_up, textcolor = swing_type_color, color = color.new(swing_type_color, 100), size = size.tiny) // Function to check overlapping f_check_overlapping(new_poi, box_array, atr) => atr_threshold = atr * 2 okay_to_draw = true for i = 0 to array.size(box_array) - 1 top = box.get_top(array.get(box_array, i)) bottom = box.get_bottom(array.get(box_array, i)) poi = (top + bottom) / 2 upper_boundary = poi + atr_threshold lower_boundary = poi - atr_threshold if new_poi >= lower_boundary and new_poi <= upper_boundary okay_to_draw := false break else okay_to_draw := true okay_to_draw // Function to draw supply or demand zone f_supply_demand(value_array, bn_array, box_array, label_array, box_type, atr) => atr_buffer = atr * (box_width / 10) box_left = array.get(bn_array, 0) box_right = bar_index var float box_top = 0.00 var float box_bottom = 0.00 var float poi = 0.00 if box_type == 1 box_top := array.get(value_array, 0) box_bottom := box_top - atr_buffer poi := (box_top + box_bottom) / 2 else if box_type == -1 box_bottom := array.get(value_array, 0) box_top := box_bottom + atr_buffer poi := (box_top + box_bottom) / 2 okay_to_draw = f_check_overlapping(poi, box_array, atr) if box_type == 1 and okay_to_draw box.delete( array.get(box_array, array.size(box_array) - 1) ) f_array_add_pop(box_array, box.new( left = box_left, top = box_top, right = box_right, bottom = box_bottom, border_color = supply_outline_color, bgcolor = supply_color, extend = extend.right, text = 'SUPPLY', text_halign = text.align_center, text_valign = text.align_center, text_color = poi_label_color, text_size = size.small, xloc = xloc.bar_index)) box.delete( array.get(label_array, array.size(label_array) - 1) ) f_array_add_pop(label_array, box.new( left = box_left, top = poi, right = box_right, bottom = poi, border_color = color.new(poi_label_color,90), bgcolor = color.new(poi_label_color,90), extend = extend.right, text = 'POI', text_halign = text.align_left, text_valign = text.align_center, text_color = poi_label_color, text_size = size.small, xloc = xloc.bar_index)) else if box_type == -1 and okay_to_draw box.delete( array.get(box_array, array.size(box_array) - 1) ) f_array_add_pop(box_array, box.new( left = box_left, top = box_top, right = box_right, bottom = box_bottom, border_color = demand_outline_color, bgcolor = demand_color, extend = extend.right, text = 'DEMAND', text_halign = text.align_center, text_valign = text.align_center, text_color = poi_label_color, text_size = size.small, xloc = xloc.bar_index)) box.delete( array.get(label_array, array.size(label_array) - 1) ) f_array_add_pop(label_array, box.new( left = box_left, top = poi, right = box_right, bottom = poi, border_color = color.new(poi_label_color,90), bgcolor = color.new(poi_label_color,90), extend = extend.right, text = 'POI', text_halign = text.align_left, text_valign = text.align_center, text_color = poi_label_color, text_size = size.small, xloc = xloc.bar_index)) // Function to change supply/demand to BOS if broken f_sd_to_bos(box_array, bos_array, label_array, zone_type) => if zone_type == 1 for i = 0 to array.size(box_array) - 1 level_to_break = box.get_top(array.get(box_array,i)) if close >= level_to_break copied_box = box.copy(array.get(box_array,i)) f_array_add_pop(bos_array, copied_box) mid = (box.get_top(array.get(box_array,i)) + box.get_bottom(array.get(box_array,i))) / 2 box.set_top(array.get(bos_array,0), mid) box.set_bottom(array.get(bos_array,0), mid) box.set_extend( array.get(bos_array,0), extend.none) box.set_right( array.get(bos_array,0), bar_index) box.set_text( array.get(bos_array,0), 'BOS' ) box.set_text_color( array.get(bos_array,0), bos_label_color) box.set_text_size( array.get(bos_array,0), size.small) box.set_text_halign( array.get(bos_array,0), text.align_center) box.set_text_valign( array.get(bos_array,0), text.align_center) box.delete(array.get(box_array, i)) box.delete(array.get(label_array, i)) if zone_type == -1 for i = 0 to array.size(box_array) - 1 level_to_break = box.get_bottom(array.get(box_array,i)) if close <= level_to_break copied_box = box.copy(array.get(box_array,i)) f_array_add_pop(bos_array, copied_box) mid = (box.get_top(array.get(box_array,i)) + box.get_bottom(array.get(box_array,i))) / 2 box.set_top(array.get(bos_array,0), mid) box.set_bottom(array.get(bos_array,0), mid) box.set_extend( array.get(bos_array,0), extend.none) box.set_right( array.get(bos_array,0), bar_index) box.set_text( array.get(bos_array,0), 'BOS' ) box.set_text_color( array.get(bos_array,0), bos_label_color) box.set_text_size( array.get(bos_array,0), size.small) box.set_text_halign( array.get(bos_array,0), text.align_center) box.set_text_valign( array.get(bos_array,0), text.align_center) box.delete(array.get(box_array, i)) box.delete(array.get(label_array, i)) // Function to extend box endpoint f_extend_box_endpoint(box_array) => for i = 0 to array.size(box_array) - 1 box.set_right(array.get(box_array, i), bar_index + 100) //============================================================================ // SR FUNCTIONS //============================================================================ percWidth(len, perc) => (ta.highest(len) - ta.lowest(len)) * perc / 100 //============================================================================ // SUPPLY/DEMAND CALCULATIONS //============================================================================ atr = ta.atr(50) swing_high = ta.pivothigh(high, swing_length, swing_length) swing_low = ta.pivotlow(low, swing_length, swing_length) var swing_high_values = array.new_float(5,0.00) var swing_low_values = array.new_float(5,0.00) var swing_high_bns = array.new_int(5,0) var swing_low_bns = array.new_int(5,0) var current_supply_box = array.new_box(history_of_demand_to_keep, na) var current_demand_box = array.new_box(history_of_demand_to_keep, na) var current_supply_poi = array.new_box(history_of_demand_to_keep, na) var current_demand_poi = array.new_box(history_of_demand_to_keep, na) var supply_bos = array.new_box(5, na) var demand_bos = array.new_box(5, na) // New swing high if not na(swing_high) f_array_add_pop(swing_high_values, swing_high) f_array_add_pop(swing_high_bns, bar_index ) if show_price_action_labels f_sh_sl_labels(swing_high_values, 1) f_supply_demand(swing_high_values, swing_high_bns, current_supply_box, current_supply_poi, 1, atr) // New swing low else if not na(swing_low) f_array_add_pop(swing_low_values, swing_low) f_array_add_pop(swing_low_bns, bar_index ) if show_price_action_labels f_sh_sl_labels(swing_low_values, -1) f_supply_demand(swing_low_values, swing_low_bns, current_demand_box, current_demand_poi, -1, atr) f_sd_to_bos(current_supply_box, supply_bos, current_supply_poi, 1) f_sd_to_bos(current_demand_box, demand_bos, current_demand_poi, -1) f_extend_box_endpoint(current_supply_box) f_extend_box_endpoint(current_demand_box) //============================================================================ // SR CALCULATIONS & PLOTTING //============================================================================ rb = 10 prd = 284 ChannelW = 10 label_loc = 55 style = lineStyle == "Solid" ? line.style_solid : lineStyle == "Dotted" ? line.style_dotted : line.style_dashed ph = ta.pivothigh(rb, rb) pl = ta.pivotlow (rb, rb) sr_levels = array.new_float(21, na) prdhighest = ta.highest(prd) prdlowest = ta.lowest(prd) cwidth = percWidth(prd, ChannelW) zonePerc = percWidth(300, zoneWidth) aas = array.new_bool(41, true) u1 = 0.0, u1 := nz(u1 ) d1 = 0.0, d1 := nz(d1 ) highestph = 0.0, highestph := highestph lowestpl = 0.0, lowestpl := lowestpl var sr_levs = array.new_float(21, na) label hlabel = na, label.delete(hlabel ) label llabel = na, label.delete(llabel ) var sr_lines = array.new_line(21, na) var sr_linesH = array.new_line(21, na) var sr_linesL = array.new_line(21, na) var sr_linesF = array.new_linefill(21, na) var sr_labels = array.new_label(21, na) if ph or pl for x = 0 to array.size(sr_levels) - 1 array.set(sr_levels, x, na) highestph := prdlowest lowestpl := prdhighest countpp = 0 for x = 0 to prd if na(close ) break if not na(ph ) or not na(pl ) highestph := math.max(highestph, nz(ph , prdlowest), nz(pl , prdlowest)) lowestpl := math.min(lowestpl, nz(ph , prdhighest), nz(pl , prdhighest)) countpp += 1 if countpp > 40 break if array.get(aas, countpp) upl = (ph ? high : low ) + cwidth dnl = (ph ? high : low ) - cwidth u1 := countpp == 1 ? upl : u1 d1 := countpp == 1 ? dnl : d1 tmp = array.new_bool(41, true) cnt = 0 tpoint = 0 for xx = 0 to prd if na(close ) break if not na(ph ) or not na(pl ) chg = false cnt += 1 if cnt > 40 break if array.get(aas, cnt) if not na(ph ) if high <= upl and high >= dnl tpoint += 1 chg := true if not na(pl ) if low <= upl and low >= dnl tpoint += 1 chg := true if chg and cnt < 41 array.set(tmp, cnt, false) if tpoint >= strengthSR for g = 0 to 40 by 1 if not array.get(tmp, g) array.set(aas, g, false) if ph and countpp < 21 array.set(sr_levels, countpp, high ) if pl and countpp < 21 array.set(sr_levels, countpp, low ) // Plot SR var line highest_ = na, line.delete(highest_) var line lowest_ = na, line.delete(lowest_) var line highest_fill1 = na, line.delete(highest_fill1) var line highest_fill2 = na, line.delete(highest_fill2) var line lowest_fill1 = na, line.delete(lowest_fill1) var line lowest_fill2 = na, line.delete(lowest_fill2) hi_col = close >= highestph ? colorSup : colorRes lo_col = close >= lowestpl ? colorSup : colorRes if enableSR highest_ := line.new(bar_index - 311, highestph, bar_index, highestph, xloc.bar_index, expandSR ? extend.both : extend.right, hi_col, style, lineWidth) lowest_ := line.new(bar_index - 311, lowestpl , bar_index, lowestpl , xloc.bar_index, expandSR ? extend.both : extend.right, lo_col, style, lineWidth) if useHLZones highest_fill1 := line.new(bar_index - 311, highestph + zonePerc, bar_index, highestph + zonePerc, xloc.bar_index, expandSR ? extend.both : extend.right, na) highest_fill2 := line.new(bar_index - 311, highestph - zonePerc, bar_index, highestph - zonePerc, xloc.bar_index, expandSR ? extend.both : extend.right, na) lowest_fill1 := line.new(bar_index - 311, lowestpl + zonePerc , bar_index, lowestpl + zonePerc , xloc.bar_index, expandSR ? extend.both : extend.right, na) lowest_fill2 := line.new(bar_index - 311, lowestpl - zonePerc , bar_index, lowestpl - zonePerc , xloc.bar_index, expandSR ? extend.both : extend.right, na) linefill.new(highest_fill1, highest_fill2, color.new(hi_col, 80)) linefill.new(lowest_fill1 , lowest_fill2 , color.new(lo_col, 80)) if ph or pl for x = 0 to array.size(sr_lines) - 1 array.set(sr_levs, x, array.get(sr_levels, x)) for x = 0 to array.size(sr_lines) - 1 line.delete(array.get(sr_lines, x)) line.delete(array.get(sr_linesH, x)) line.delete(array.get(sr_linesL, x)) linefill.delete(array.get(sr_linesF, x)) if array.get(sr_levs, x) and enableSR line_col = close >= array.get(sr_levs, x) ? colorSup : colorRes array.set(sr_lines, x, line.new(bar_index - 355, array.get(sr_levs, x), bar_index, array.get(sr_levs, x), xloc.bar_index, expandSR ? extend.both : extend.right, line_col, style, lineWidth)) if useZones array.set(sr_linesH, x, line.new(bar_index - 355, array.get(sr_levs, x) + zonePerc, bar_index, array.get(sr_levs, x) + zonePerc, xloc.bar_index, expandSR ? extend.both : extend.right, na)) array.set(sr_linesL, x, line.new(bar_index - 355, array.get(sr_levs, x) - zonePerc, bar_index, array.get(sr_levs, x) - zonePerc, xloc.bar_index, expandSR ? extend.both : extend.right, na)) array.set(sr_linesF, x, linefill.new(array.get(sr_linesH, x), array.get(sr_linesL, x), color.new(line_col, 80))) for x = 0 to array.size(sr_labels) - 1 label.delete(array.get(sr_labels, x)) if array.get(sr_levs, x) and enableSR lab_loc = close >= array.get(sr_levs, x) ? label.style_label_up : label.style_label_down lab_col = close >= array.get(sr_levs, x) ? colorSup : colorRes array.set(sr_labels, x, label.new(bar_index + label_loc, array.get(sr_levs, x), str.tostring(math.round_to_mintick(array.get(sr_levs, x))), color=lab_col , textcolor=#000000, style=lab_loc)) hlabel := enableSR ? label.new(bar_index + label_loc + math.round(math.sign(label_loc)) * 20, highestph, "High Level : " + str.tostring(highestph), color=hi_col, textcolor=#000000, style=label.style_label_down) : na llabel := enableSR ? label.new(bar_index + label_loc + math.round(math.sign(label_loc)) * 20, lowestpl , "Low Level : " + str.tostring(lowestpl) , color=lo_col, textcolor=#000000, style=label.style_label_up ) : na
อินดิเคเตอร์ Pine Script®
โดย doctorUnlocker
Structure Breakout - Buy Sell IndicatorStructure Breakout - Buy Sell Indicator 📈 OVERVIEW: A minimalist indicator that identifies market structure breakouts using swing point analysis. Displays clear blue buy arrows and red sell arrows when price breaks key swing levels. 🔧 HOW IT WORKS: 1. Identifies swing highs and lows using configurable lookback period 2. Triggers BUY signal (blue arrow) when price closes above previous swing high 3. Triggers SELL signal (red arrow) when price closes below previous swing low 4. Uses clean visual arrows without cluttering the chart ⚙️ KEY FEATURES: • Clean, uncluttered visual signals • Customizable sensitivity period • Blue arrows for buy signals (below bars) • Red arrows for sell signals (above bars) • No lagging repainting • Works on all timeframes 🎯 TRADING APPLICATIONS: • Swing trading entries • Breakout confirmation • Trend continuation signals • Support/resistance breaks ⚡ SETTINGS: • Structure Detection Period (default: 20) - Adjust sensitivity of swing detection ⚠️ RISK DISCLAIMER: This is an educational tool. Always use proper risk management. Past performance does not guarantee future results.
อินดิเคเตอร์ Pine Script®
โดย ChandraBose2002
3
Trend Step Channel [BigBeluga]🔵 OVERVIEW Trend Step Channel identifies directional bias by forming a dynamic volatility-based step channel. It detects trend shifts when candle lows close above the upper band (bullish) or when candle highs drop below the lower band (bearish). A step-style midline tracks the trend evolution, while an integrated dashboard shows price positioning percentages across multiple timeframes. 🔵 CONCEPTS ATR-Based Channel — The indicator constructs upper and lower channel boundaries using ATR distance around a single adaptive trend line, providing automatic scaling with volatility. Trend Direction Logic — • Low above upper band → uptrend confirmation. • High below lower band → downtrend confirmation. Step Trend Line — A reactive midline that locks onto price swings, stepping upward or downward as new trend confirmations occur. Channel Width — Defines the total volatility range around the midline; a wider channel smooths market noise, while a narrower one reacts faster. Price Position Ratio — Calculates the relative position of the close within the channel, from 0% (bottom) to 100% (top). 🔵 FEATURES Volatility-Adaptive Channel — Expands and contracts dynamically to match market volatility, maintaining consistent distance scaling. Configurable MA Source — Choose from SMA, EMA, SMMA, WMA, or VWMA as the base smoothing method. Color-Coded Step Line — • Green indicates an uptrend. • Orange indicates a downtrend. Channel Fill Visualization — Semi-transparent fills highlight active volatility zones for clear trend identification. Price Position Label — Displays a “<” marker and percentage at the channel edge showing how far the current close is from the lower or upper band. Multi-Timeframe Dashboard — • Displays alignment across 1H–5H charts. • Each cell shows an arrow (↑ / ↓) with price % positioning. • Cell background color reflects bullish or bearish bias. Real-Time Updating — The channel, midline, and dashboard refresh dynamically every bar for continuous feedback. 🔵 HOW TO USE Trend Confirmation — • Bullish trend forms when candle low closes above the upper band. • Bearish trend forms when candle high closes below the lower band. Trend Continuation — Maintain bias while the step line color remains consistent. Volatility Breakouts — Sudden candle breaks outside the band suggest new directional strength. Dashboard Alignment — Confirm trend consistency across multiple timeframes before entering trades. Entry Planning — In uptrends, consider entries near the lower band; in downtrends, focus on upper-band rejections. Price Position Insight — Use the % label to judge whether price is extended (near 100%) or compressed (near 0%) within the channel. 🔵 CONCLUSION Trend Step Channel delivers a precise, volatility-driven view of trend structure using ATR-based boundaries and a step-line framework. The integrated dashboard, color-coded channel, and live positioning metrics give traders a complete picture of market direction, trend strength, and price location within evolving conditions.
อินดิเคเตอร์ Pine Script®
โดย BigBeluga
7
Auto Reaction Zones (XAUUSD) ✅ Auto Reaction Zones (XAUUSD) OANDA:XAUUSD Auto Reaction Zones (XAUUSD) is an advanced supply & demand mapping tool designed to detect high-probability reaction zones using price impulses, volatility filters, market structure, and adaptive confirmation logic. This indicator automatically identifies strong bullish and bearish reaction bases formed before impulsive movements, then plots dynamic demand and supply zones that help traders anticipate future reactions, reversals, or continuation points. 🔍 Core Features ▪ Automatic Supply & Demand Zone Detection Identifies zones based on structural breakout impulses using ATR-based thresholds, volume confirmation, and validated base levels. ▪ Adaptive Confirmation Distance (ADR-Based) The zone becomes active/confirmed only after price moves a configurable number of points. A unique 3-case ADR logic adjusts the required confirmation distance based on current market volatility: Case 1: Low ADR → smaller confirmation required Case 2: Moderate ADR → medium confirmation Case 3: High ADR → higher confirmation (more filtering) This ensures stronger zones in high-volatility conditions (e.g., XAUUSD). ▪ Smart Zone Management Automatic extension until tested or consumed Optional lifetime limits (bars or days) Auto-delete unconfirmed zones if price violates them too early Hide tested or consumed zones for a cleaner chart ▪ Adjustable Zone Size Filtering Option to enforce a minimum or maximum zone size, useful for cleaning noise and ultra-small reaction levels. ▪ ADR-Based Zone Spacing Filter Prevents the creation of zones that are too close to each other. Different spacing rules for same-direction and opposite-direction zones. ▪ Multi-Timeframe Mode Overlay zones detected from higher timeframes directly onto your current chart. ▪ Directional Bias (EMA Filter) Optionally restrict long/short zones based on EMA trend alignment. ▪ Real-Time Alerts Receive alerts when price touches any active zone or only fresh zones. 🎯 Why This Indicator Is Different Unlike typical supply/demand indicators that print every swing, Auto Reaction Zones focuses on: Only strong reaction bases Only valid impulse-generated levels Only zones confirmed by price movement Only zones that respect volatility and minimum spacing rules This results in cleaner charting, fewer false zones, and far more reliable reaction levels, especially on volatile instruments like XAUUSD. ⚠️ Disclaimer This tool is not financial advice. Always combine zone analysis with broader market context and risk management.
อินดิเคเตอร์ Pine Script®
โดย Devil2171
Multi-Pivot Plotter//================================================================================ //📌 Manual Pivot Plotter (4 Sets: P, R1–R3, S1–S3) // - Up to 4 indices // - Each index: Name + P/S/R values // - One shared Style block: colors, visibility, line width (applies to all indices) // - Lines start at 00:00 UTC+8 and extend a few bars // - Labels at line end or start, with optional "Index Name" and price value //================================================================================
อินดิเคเตอร์ Pine Script®
โดย Raj7rader
Crypto Anchored VWAP (Swing High/Low)Crypto Anchored VWAP (Swing High/Low) This indicator provides an automatic Anchored VWAP system designed specifically for highly volatile assets such as cryptocurrencies (ETH, BTC, SOL, etc.). Unlike traditional AVWAP tools that require manual date input, this script automatically anchors VWAP to the most recent swing high and swing low, making it ideal for real-time trend tracking and intraday/4H structure analysis. How It Works The script detects local swing lows and swing highs based on user-defined swing length. When a new swing point appears, an Anchored VWAP is initialized from that specific candle. As price evolves, the AVWAP dynamically becomes: A trend boundary A fair-value line A mean-reversion attractor Traders can use these levels to identify: Trend continuation Breakout confirmation Mean reversion pullbacks Overextended expansions Included Features ✔ Auto-Anchored VWAP from swing low ✔ Auto-Anchored VWAP from swing high ✔ Standard deviation bands (1σ) for volatility context ✔ Designed for Crypto 4H / 1H / 15m ✔ Works on any asset & any timeframe How To Use 1. Trend Direction Price above Swing-Low VWAP → Bullish bias Price below Swing-High VWAP → Bearish bias 2. Trade Setups Break → Retest → Hold above AVWAP = Trend continuation long Reject from AVWAP / σ band = Mean-reversion short setup AVWAP zone → High probability liquidity reaction 3. Volatility Bands Price touching +1σ = extension Price returning to 0σ = mean reversion Price breaking −1σ = trend weakening Inputs Swing Length: determines sensitivity of swing high/low detection (Default: 5) Best Use Cases ETH 4H trend following BTC structure shifts Altcoin volatility filtering Identifying institutional "cost basis" zones Confirming breakouts / fakeouts Notes This is not a trading system by itself but a structural tool meant to help traders understand trend and value location. Always combine AVWAP with market structure, volume, and risk management. Disclaimer This script is for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any asset. Use at your own discretion.
อินดิเคเตอร์ Pine Script®
โดย Veigar