Martingale Grid BotMartingale Grid Bot (MGB)
The strategy is designed to test grid trading with a possible increase in the size of each subsequent order based on the martingale principle. The strategy itself does not contain any trade decision logic and is fully driven by external signals coming from indicators used on the chart. A new grid of orders is created when an entry signal is received, provided that there is no active grid.
❗ Warning
Trading with leverage and martingale involves increased risk. This strategy is a rather rough tool and is intended for testing purposes only. The author is not responsible for any possible discrepancies between the strategy results and real trading.
Settings
Direction - Trading direction. Possible values: Long and Short.
Entry Signal Source - Source of the entry signal that initiates the creation of a new order grid. If one of the price sources (open, high, low, close, etc.) is selected, a new grid will be created automatically after the previous grid is fully closed.
Start Time - Date and time when the strategy starts operating. Marked on the chart with a vertical dashed line.
No Repainting Mode - A mode intended to reduce discrepancies between historical and real-time strategy behavior (repainting).
Enabled — a new grid is created only after the bar is closed. The first order can be filled no earlier than on the next bar.
Disabled — in real-time, a new grid can be created immediately upon receiving a signal or after the previous grid is closed by take profit or stop loss.
❗ Attention
For correct real-time operation, recalculation on every tick must be enabled in the strategy settings.
GRID
Grid Depth % - The depth of the order grid, specified as a percentage of the closing price at the moment the grid is created.
Orders Count - The number of orders in the grid. The first order is placed at the current closing price at the time of grid creation.
Martingale Multiplier - Position size multiplier. Each subsequent order in the grid will be increased by this factor. The size of the first order is defined in the strategy settings.
Leverage - Leverage multiplier for margin trading. Used to check available funds when creating grid orders. It is recommended to use it together with the margin parameters in the strategy settings.
Take Profit % - Calculated on each strategy update based on the average entry price. If none of the grid orders have been filled yet, the take-profit level for the first order is displayed on the chart.
Stop Loss % - Calculated from the price of the first grid order and does not change during the strategy operation. Orders whose price exceeds the stop-loss level will be automatically canceled.
TABLE
Show Table - Controls the display of the table with all orders of the current grid. If there is no active grid, no order data is displayed. Text and background colors are determined automatically based on the chart background color.
Order Size - Determines how the grid order size is displayed: in contracts or in currency.
Table Size - Font size in the table.
Timezone - Used to correctly display the order fill time relative to the chart time. The order fill time (status: filled) can be seen by hovering over the corresponding status cell in the table.
VISUAL
Long Entry - Color of the dotted lines representing grid orders when trading long. Also defines the color of the vertical line indicating the strategy start time.
Short Entry - Color of the dotted lines representing grid orders when trading short. Also defines the color of the vertical line indicating the strategy start time.
Take Profit - Color of the solid line representing the take-profit level.
Stop Loss - Color of the solid line representing the stop-loss level.
Strategy
High Breakout PRO - Huy Hoang Trader
# High Breakout PRO - Huy Hoang Trader - Strategy Description
## 🚀 Overview
**High Breakout PRO** is a professional-grade Trend Following strategy designed to capture major market moves while strictly managing risk. Built on the core philosophy of "Price Action Breakouts," this script enhances the classic Donchian Channel breakout method with modern risk management tools like the **Hybrid Exit** and **EMA Trend Filter**.
This strategy is optimized for **Gold (XAUUSD)**, **Bitcoin (BTC)**, and **Major Stocks (AAPL, AMZN)** on **H4 and Daily** timeframes.
## 💎 Key Features
1. **Trend Filter (EMA):** Only takes long positions when the price is above the 200-period EMA. This filters out counter-trend noise and significantly improves winning probability.
2. **Hybrid Exit Mechanism ("Holy Grail"):** A unique dynamic trailing stop that combines:
* **Price Structure:** Uses the lowest low of the last Y bars (Donchian Support).
* **Volatility:** Uses ATR-based trailing (Chandelier Exit logic).
* *Logic:* The system automatically chooses the **tighter** (higher) stop level between the two, ensuring you lock in profits rapidly during strong volatility while giving the trade room to breathe during accumulation.
3. **Professional Visuals:** A refined "Wealth & Earth" themes (Gold/Silver/Brown) specifically designed to reduce eye strain and provide clear, professional signal visibility without chart clutter.
## 🛠 Strategy Logic
### entry rules
* **Breakout:** Price closes above the Highest High of the last `X` bars (Default: 20).
* **Trend Confirmation:** Closing Price > EMA 200 (Configurable).
### Exit Rules
* **Dynamic Stop Loss:** The trade is closed when price breaches the **Hybrid Trailing Stop**.
* The Trailing Stop never moves down. It only moves up as price increases.
* It effectively adapts to both slow-grinding trends and explosive spikes.
## ⚙️ Best Settings (Recommended)
* **Timeframe:** H4 (Swing Trading) or Daily (Position Trading).
* **Entry Period (X):** 20
* **Exit Period (Y):** 10
* **Trend Filter:** ON (EMA 200)
* **Risk Management:** Hybrid Mode (ATR Multiplier 3.0)
## ⚠️ Disclaimer
This strategy follows trends. It may experience drawdowns during choppy/sideways markets. Always use proper risk management (position sizing) and backtest on your specific asset before live trading.
---
*Developed by Antigravity. Empowering traders with institutional-grade tools.*
Contact for work: www.facebook.com
T.S.T PRO (JakDongJung Collection)Overview
The is a high-performance trend-following strategy designed to capture major market moves while filtering out "noise" and false breakouts. It utilizes a sophisticated Triple Supertrend engine combined with multiple analytical layers—Volume, Momentum (ADX), Volatility (BBW), and Multi-Timeframe (HTF) analysis—to ensure high-probability entries.
Core Entry Logic
1. Triple Supertrend Alignment: The strategy confirms a trend only when three Supertrends with different sensitivities (Fast, Medium, Slow) align in the same direction.
2. Median Filter: To prevent entering at the very top or bottom of a local spike, the price must be positioned relative to the Median Supertrend line.
3. Strategic Filters (Optional):
- Volume Filter: Ensures the move is backed by sufficient market participation.
- ADX Filter: Confirms trend strength to avoid weak or exhausting trends.
- Volatility (BBW) Filter: Uses Bollinger Band Width to ensure the market is in an active expansion phase.
- HTF Trend Filter: Syncs the current timeframe trades with a higher time frame (e.g., Daily) to ensure you are trading with the "Big Picture" trend.
Advanced Money Management
This strategy is built with professional risk management at its core:
- 4 Sizing Modes: Choose between Risk % of Equity, Fixed Capital Amount, % of Equity, or Fixed Quantity.
- Dual Stop-Loss Modes: * Supertrend Mode: Dynamically tracks the Median Supertrend line.
- Fixed Mode: Locks the SL at entry based on ATR multiplier or fixed percentage.
- Execution Flexibility: Choose between "Real-Time Touch" (instant SL) or "On Close" (confirmed bar) for exit execution.
Profit Taking & Protection
- 5-Stage Take Profit: Scale out of positions systematically. Each TP level can be set via ATR Multiplier or Fixed Percentage.
- Automatic Break-Even: Once Take Profit 1 (TP1) is hit, the strategy automatically moves the Stop Loss to the entry price, securing a "risk-free" trade.
Visual Analytics
- Dynamic Visuals: Clearly displays your active Stop Loss, Entry Price, and all 5 Take Profit levels on the chart.
- Performance Table: Includes an integrated Monthly Performance Table to track your strategy's historical returns, drawdown, and consistency directly on the UI.
Recommended Settings
- Timeframes: 1H, 4H, and Daily (D) timeframes are recommended for the best trend-following results.
- Assets: Highly liquid assets such as Major Crypto Pairs (BTC, ETH) and Major Forex pairs.
- Optimization: While the default settings are robust, users are encouraged to adjust the Supertrend factors and ATR multipliers based on the specific volatility of their chosen asset.
Disclaimer
This script is for educational and backtesting purposes only. Past performance does not guarantee future results. Trading involves significant risk, and it is highly recommended to test the strategy thoroughly on a demo account before live deployment.
Binary Options Strategy 1-5-15-30-90 Sec & Min [TradingFinder]🔵 Introduction
Market behavior is not defined by randomness, but by order positioning, structural pressure, and directional imbalance. Every expansion or rejection in price is the result of how the market distributes orders around critical structural areas. These reactions become visible only when price reaches zones where participation and exposure are at their highest.
Price naturally migrates toward areas of unfinished business, levels where previous moves left behind unfilled orders or weak structure. When these areas are reached, the market often produces a temporary structural violation, creating the appearance of continuation while internally transitioning to the opposite side.
These brief violations are not failures of structure; they are transitional events. Their purpose is to exhaust one side of the market, absorb remaining orders, and prepare price for a directional response. Once this process is complete, price tends to react sharply as balance is restored and a new directional phase begins.
Reactions frequently originate from price inefficiencies and institutional positioning zones, where rapid movement previously occurred without sufficient interaction. When price revisits these areas after a structural trap, it often delivers decisive and controlled responses.
This screener is designed to detect these transition moments, when structural pressure, order absorption, and directional intent align. By isolating these conditions across multiple symbols, it converts complex market mechanics into clear, actionable structural signals, allowing traders to focus on moments where price behavior reflects intention rather than noise.
Bullish Signal :
Bearish Signal :
🔵 How to Use
This screener is built to identify structural reaction points where the market completes a directional phase and begins a new one. Instead of tracking price continuously, it scans for moments when pressure, exhaustion, and response converge at key structural locations.
The output of the screener should be treated as a filter, not a final decision. Each flagged symbol highlights a scenario where price behavior suggests a potential directional response. Traders are expected to confirm context, execution timing, and risk parameters on the chart before entering a position.
🟣 Long Setup
A bullish scenario is detected when price transitions from a downward phase into an area where sell pressure weakens and absorption occurs. This typically happens after price extends below recent structural lows, reaching a zone where downside continuation becomes inefficient.
In this region, price often shows signs of failed continuation. The market temporarily pushes lower but lacks follow-through, indicating that selling interest is being absorbed. Shortly after, price stabilizes and begins to react upward from a structurally sensitive area.
When the screener identifies this sequence, downward expansion, structural failure, and upward reaction, it flags the symbol as a potential long opportunity.
This condition reflects a shift from distribution to accumulation, where downside momentum is exhausted and buying pressure starts to dominate. For execution-based strategies, the optimal entry usually occurs shortly after the market confirms the reaction and begins to move away from the structural zone.
🟣 Short Setup
A bearish scenario is detected when price advances into an area where buy pressure becomes overstretched and upward continuation loses efficiency. This often occurs after price trades above recent structural highs, entering a zone where aggressive buying is met with strong opposing interest.
In these areas, price frequently produces a temporary expansion higher followed by hesitation or rejection. The inability to sustain movement above the level signals that buying momentum is being absorbed and that the market is preparing for a directional shift.
When the screener detects upward extension followed by structural weakness and downside response, it flags the symbol as a potential short opportunity.
This setup represents a transition from accumulation to distribution, where control shifts from buyers to sellers. The most effective execution window typically appears immediately after price confirms rejection and starts moving away from the upper structural zone, as reactions tend to be fast and decisive once the transition completes.
🔵 Settings
Swing Period : Determines how many candles are used to identify structural turning points such as swing highs and swing lows. Higher values increase accuracy but reduce the number of signals.
Signal Type : Specifies the type of signal generated by the indicator. The option All shows every signal, Main Signal displays only the primary one, and Alternative Signal produces a secondary signal that appears one candle after the main signal for additional confirmation.
Candle Pattern : Enables candle pattern logic for reversal confirmation. When active, the indicator issues a signal only when a valid candle formation confirms the market reaction.
Candle LookBack Check : Verifies that the last few candles move in the opposite direction of the signal to be generated. This condition acts as a confirmation filter, ensuring that the signal appears only after a clear counter-move in price.
Last Candle Direction : Considers the direction of the most recent candle in the analysis. It helps determine whether the final candle moves with or against the current trend.
Last Candle Shadow Ratio : Sets the ratio between the last candle’s wick and body to refine confirmation accuracy. Higher values require longer wicks, indicating stronger rejection and a more reliable reversal pattern.
Table on Chart : This setting enables or disables the on chart screener table. When enabled, the table displays signal status, correlation information, and symbol data directly on the chart. When disabled, the chart remains clean with no table overlay.
Number of Symbols : This option controls how many symbol pairs are displayed in the screener table. Users can choose between four or six pairs depending on screen size and personal preference.
Table Size : This setting adjusts the visual scale of the screener table. Smaller sizes are suitable for minimal layouts, while larger sizes improve readability when monitoring multiple pairs simultaneously.
Table Mode : This setting offers two layout styles for the signal table.
Basic mode displays symbols in a single vertical column, using more vertical space and providing straightforward readability.
Extended mode arranges symbols in pairs side by side, optimizing screen space with a more compact and efficient layout.
Table Position : This option defines where the screener table is placed on the chart. The table can be positioned in any corner or central area to avoid overlapping with price action or other indicators.
🔵 Conclusion
Markets move through a continuous cycle of expansion, exhaustion, and response. Understanding this cycle requires more than observing price direction; it demands recognizing where pressure builds, where it fails, and where control shifts from one side of the market to the other.
This screener is designed to isolate those moments of transition. By filtering symbols based on structural interaction, absorption, and reaction, it highlights situations where price behavior reflects intentional movement rather than random fluctuation. Instead of reacting to every candle or chasing momentum, traders can use this tool to focus on selective, high-quality scenarios where directional probability improves due to completed structural processes.
The true value of this screener lies in its ability to reduce noise, compress complex market mechanics into actionable signals, and support disciplined decision-making. When used with proper context and risk control, it becomes a powerful framework for identifying moments when the market reveals its next directional phase.
Consistency with this approach comes not from frequency, but from patience, confirmation, and a clear understanding of how price transitions between phases. Those who learn to wait for these transitions gain a significant advantage in reading and responding to market behavior.
Levels HunterDescription
Levels Hunter (Fussion) is an advanced technical indicator for TradingView created for fast intraday and scalping traders operating on 1 min, 3 min, and 5 min charts. It integrates automatic pivot detection, trend evaluation with EMA, volume-weighted VWAP, and RSI momentum, while also tracking All-Time High/Low levels in real-time.
Unlike basic indicators that only draw simple averages or isolated levels, Levels Hunter delivers clear, filtered conditions based on a confluence of technical signals — including LONG/SHORT alerts, on-chart pivot placements, and a real-time data dashboard. This makes it a powerful tool for traders seeking objective entry signals and contextual market insights without noise.
Key Features:
Auto detection of higher timeframe pivot highs and lows relative to your working chart.
Trend measurement via optimized EMA per timeframe.
Entry signals filtered through RSI and EMA cross logic.
VWAP level plotted for real-time price positioning.
Visual ATH/ATL lines with labels for historic extremes.
Dynamic on-screen dashboard showing technical data in real time.
Configurable alerts for pivot detection and confirmed signals.
Commercial Value:
Levels Hunter does not repaint confirmed levels or signals, giving traders confidence to act on validated technical information.
Overview
Levels Hunter is designed to filter high-quality trade entries using multiple technical confirmations rather than delivering single noisy signals. The strategy’s backbone uses higher timeframe pivots, EMA trend confirmation, VWAP price position, and RSI momentum filters to generate reliable signals.
Long Entry Conditions
Enter a LONG trade when all the following are true:
New bullish pivot detected — shows recent buying pressure.
Price crosses above the EMA — confirming a bullish trend shift.
RSI < 50 on crossover — suggests entry before momentum peaks.
Price above the VWAP — confirms volume-supported strength.
💡 Multiple condition agreement reduces false entries and improves timing.
Short Entry Conditions
Enter a SHORT trade when all the following are true:
New bearish pivot detected — shows dominant selling pressure.
Price crosses below the EMA — confirms bearish trend direction.
RSI > 50 at crossunder — signals continuation momentum prior to reversal.
Price below the VWAP — indicates volume-backed price decline.
Additional Filters
Only trade in the direction supported by both EMA and VWAP alignment.
Avoid trading during high-impact news that trigger erratic volatility.
Ensure the active pivot signal is still valid (remaining pivot bars shown in the table).
Trade Management
Stop Loss:
Place just below recent pivot for LONGs, or just above for SHORTs.
Take Profit:
Use prior pivot levels, ATH/ATL if relevant, or fixed reward targets (e.g., 1.5x, 2x your risk).
Cut early if:
The price breaks the opposite pivot level or RSI turns sharply against the trade without supportive price action.
Quick Execution Example
A new bullish pivot forms.
Price crosses above EMA with RSI < 50.
Price sits above VWAP.
Enter LONG at confirmation candle close.
Place SL under pivot.
Take profit at next resistance or ATH level.
ORB + Smart Level Manager [FINAL V9.2 - CD Universal Cycle]Professional Intraday Level Manager for Indian Indices:
Overview Index Smart Levels is a comprehensive technical suite designed for Nifty 50, Bank Nifty, and Sensex traders. Unlike standard pivot indicators, this script uses a mathematical "ladder" logic and multi-timeframe ORB analysis to identify high-probability institutional support and resistance zones.
🚀 Key Features Bulletproof Stability Logic (6HR Auto-Hold):
Engineered to handle special trading sessions (like Muhurat or Budget days). The script locks strikes to the previous settlement price and only "flips" to new data 6 hours after market close (09:30 PM IST), ensuring your levels remain static and updates the revised settlement price reliable during live trading.
Mathematical T & L Series Ladders:
Uses ORB to project dynamic "Target" (T) and "Level" (L) series support/resistance lines. Sure targets. Shows only current day.
Hybrid Option Cross-Plotting:
Automatically detects the correct ATM strike for both CALL and PUT, which will decide the market moving levels and shown as dashed reference lines. This concept works most efficiently.
Smart Market Status Table:
A real-time dashboard tracking Trend (Day/2H/1H/15M), RSI, ADX Trend Strength, SMC (Break of Structure), and Momentum in one compact view. It will show in first 15 mins, whether the market is trending bullish/bearish or Range.
📖 How to Use Opening Range:
Watch for price action relative to ORB. Mostly MID lines will confirm the direction, if the first 15 mins is above MID then it may be bullish then watch for the Targets and if the first 15 mins is below MID then it may be bearish then watch for the negative Targets. Side ways, refer to day trend status in the market status table for trending or range.
Ladder Targets:
Use the T-Series for short-term scalp targets and the L-Series for major intraday reversals. if the Target lines been broken strongly then it will reach next target for sure except, if L series lines are not before the target lines. Even market can go multiple targets, this script will automatically show the next targets/levels.
Cross-Plot Confirmation:
Use the dashed purple/red/green lines to see where the market is trapped or finding strength. If any Low has been broken then it has high probability to reach or break the high.
Quantum Ribbon Pro - BacktesterQuantum Ribbon Pro - Backtester
Official backtesting tool for the Quantum Ribbon Pro indicator.
Test the indicator's performance with historical data across any market and timeframe.
📋 What Is This?
A backtesting tool designed to validate Quantum Ribbon Pro signals through historical analysis.
Use it to:
Test signals on historical data
Evaluate risk management settings
Assess signal quality across different markets
Test entry/exit strategies before live trading
⚙️ Features
Signal Generation
- Trending signals with EMA + momentum confirmation
- Ribbon Bounce signals for pullback entries
- Signal Sensitivity control (1-10)
- Signal Cooldown system
- Confidence scoring (1-8 scale)
Signal Filters
- TP RSI Confirmation (all 5 ribbon pairs must align)
- Higher Timeframe Filter (15min to Weekly)
- S/R Auto-Detection (only trade at key levels)
- Quantum Range Filter (avoid choppy markets)
- Trading Hours Filter (restrict to specific sessions)
- Weekend alerts toggle
S/R Auto-Detection
- Automatic Support/Resistance detection via pivot points
- Longs only near support, shorts only near resistance
- Adjustable strength: Weak/Normal/Strong
- Customizable touch zone (0.1-5.0%)
- Optional visual zones display
Exit Management
- Ribbon Flip Exit (exits when ribbon flips against position)
- Adjustable flip sensitivity (1-5)
- Automatic position closure on reversal
Stop Loss Methods
- ATR-based (adapts to volatility)
- Fixed percentage (0.5-10%)
- Swing points (recent highs/lows with buffer)
- Adjustable distance: Tight/Normal/Wide
Take Profit System
- Single target: 1.5R / 2R / 3R
- Partial Take-Profits (enabled by default):
- TP1: 50% @ 1.5R
- TP2: 30% @ 2R
- Final: 20% @ 2.5R
- Break-even stop (triggered after TP1, TP2, or custom R:R)
Risk Management
- Position sizing
- Realistic commissions
- Slippage modeling
- Max drawdown tracking
- Win rate & profit factor metrics
Alerts
- Entry alerts (Long/Short)
- Entry @ S/R alerts (when S/R filter active)
- TP1/TP2 hit alerts
- Break-even move alerts
- Message formats: Simple/Detailed/JSON/Custom
- Template system with placeholders ({{ticker}}, {{entry}}, {{stop}}, {{tp}}, {{direction}}, {{confidence}}, {{atr}}, {{rr}})
- Webhook-ready JSON format
Customization
- Ribbon settings (custom EMA ranges and pair widths)
- Alert message templates
- Session-based trading hours
- Weekend trading control
🚀 Quick Start
Add the backtester to your chart with price action
Default Settings
Signal Settings:
- Signal Sensitivity: 5
- S/R Auto-Detection: Optional
- Ribbon Flip Exit: Optional
Risk Management:
- Stop Method: ATR
- Stop Distance: Normal (2.0x ATR)
- Take Profit: 2R
Partial Take-Profits: Enabled
- TP1: 50% @ 1.5R
- TP2: 30% @ 2R
- Final: 20% @ 2.5R
Review Results
Check win rate, profit factor, and max drawdown in the strategy report
💡 Usage Notes
Testing Approach:
Start with default settings
Test on your market/timeframe
Adjust based on results
Validate across multiple time periods
⚠️ Important
Past performance doesn't guarantee future results.
Validate on multiple markets and timeframes.
Use proper position sizing.
SPY Quant ML + Session Filter Strategy [CocoChoco]S&P 500 Quant: Machine Learning & Mean Reversion (Session-Filtered)
Overview
This is a professional-grade quantitative strategy designed specifically for the S&P 500. It combines classical statistical mean reversion (Z-Score) with a modern Machine Learning filter and rigorous institutional-grade risk management.
The strategy is optimized for traders who prioritize high win rates and capital preservation, specifically avoiding the "gap risk" associated with holding positions overnight.
Core Methodology
1. Statistical Entry (The Z-Score Engine)
The strategy identifies "oversold" conditions in a bullish context. It calculates the Z-Score of the price relative to its 20-period Mean (SMA). By default, it looks for a -1.2 Standard Deviation extension, signaling a high-probability "dip" ripe for a snap-back to the mean.
2. Trend & ML Filters
To avoid "catching a falling knife," the strategy uses two layers of confirmation:
Trend Filter: Only takes Long positions when the price is above the 200-period SMA, ensuring we only buy dips in a confirmed uptrend.
ML Correlation Filter: A Machine Learning-inspired module that analyzes the correlation between RSI and Volatility (ATR). It only permits entries when market internal dynamics suggest a reversal is technically "healthy."
3. Institutional Risk Management
This script is built for "safety-first" automation:
Hard Stop Loss: Fixed at 1.5% to protect against sudden market shocks.
Active Trailing: A dual-trigger trailing stop. It activates once the price touches the 20 SMA (The Mean) OR once a trade reaches a 0.50% profit threshold. This ensures near-winners are protected and large runners are captured.
Intraday Circuit Breaker: Includes a Max Daily Drawdown (2%) limit. If hit, the script automatically closes losing positions and halts trading for the day, while allowing winning positions to continue.
Key Features
Session-Specific: Tailored for the US Trading Session (UTC/NY times).
Zero Overnight Risk: Automatically flattens all positions before the market close (16:00 NY Time).
Holiday Intelligence: Hard-coded logic for US Market Holidays and Early Closes (2026–2028), ensuring the bot doesn't get stuck in illiquid holiday markets.
Hourly Entry Cap: Limits entries to one per hour to prevent over-concentration during a single price leg.
How to Use
Timeframe: I suggest you use it on the 5-minute or 1-hour timeframe for optimal results.
Instrument: Designed for the S&P 500, but highly effective on SPY, IVV, and ES (Futures).
Pyramiding: Designed to handle up to 3 concurrent positions, allowing the strategy to scale into a move as the Z-Score deepens.
Automation Ready
This script is fully compatible with webhook-based automation tools. All signals (Entry, SL, Trail, Market Close, and Daily Limit) are clearly labeled in the Alert comments for seamless execution. I haven't tasted it though. This is not financial advice. Please perform your own tests and manage your risk.
Disclaimer
Past performance does not guarantee future results. This script is a tool for quantitative analysis and should be used as part of a broader diversified trading plan.
ATR-Based Z-Score (with Signal Line)The ATR-Based Z-Score is an advanced, volatility-normalized oscillator designed to identify extreme price deviations more reliably than the standard Z-Score.
By replacing the traditional Standard Deviation with the Average True Range (ATR) in the denominator, this indicator eliminates the "volatility paradox" where rapid price spikes cause standard oscillators to prematurely return to zero, even as the price continues to crash.
Why this version is superior
In a classic Z-Score calculation:
Z = (Price - SMA) / (Standard Deviation)
A sudden impulsive price drop causes the Standard Deviation to explode. Because you are dividing by a rapidly increasing number, the Z-Score often "rises" while the price is still falling.
The ATR-Based Solution:
Z = (Price - SMA) / ATR
By using a long-period ATR as the denominator, the volatility measure remains stable and "clean." This ensures that the indicator’s troughs align much more accurately with actual price bottoms, staying in the oversold territory until the momentum truly shifts.
Key Features
Volatility Cleaning: The ATR-normalization prevents the indicator from "flattening out" during impulsive price movements.
Integrated Signal Line: A customizable Moving Average of the Z-Score values helps filter noise and confirms entry/exit points.
Independent Periods: You can set the Price MA (responsiveness) and the ATR (volatility baseline) separately to fine-tune the indicator to different timeframes.
How to Trade with it
1. Mean Reversion (Buy the Dip / Sell the Rip)
Long: Wait for the Z-Score to drop below a significant level (e.g., -10.0). Enter when the Z-Score crosses back above its Signal Line.
Short: Wait for the Z-Score to rise above +10.0 and enter when it crosses below the Signal Line.
2. Breakout Trading
A strong push of the Z-Score beyond the +/- 7.0 levels can indicate a powerful trend breakout.
In this case, the Signal Line crossover serves as an effective Exit Signal, telling you that the initial momentum of the breakout is fading.
Summary
✅ This indicator is designed for traders who find standard oscillators too "nervous" during volatile periods. By decoupling price deviation from immediate variance spikes, the ATR-Based Z-Score provides a rock-solid foundation for identifying true market extremes and high-probability reversal points.
# TLADe Quantum Field Ladder - ES/SPX/SPYìA proprietary visualization of market structure through the lens of field dynamics.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
WHAT THIS INDICATOR DOES
This indicator introduces a fundamentally different approach to GEX visualization.
Rather than showing discrete price levels, the Quantum Field Ladder reveals the continuous force fields that shape price movement — mapping where price is naturally attracted (MAGNETS) and where it faces resistance (WALLS).
What you see:
• Gradient Fields — smooth visual zones showing influence decay from center
• MAGNETS (Cyan) — attractor zones where price tends to gravitate
• WALLS (Magenta) — repulsor zones where price faces friction
• Field Width — the effective range of each level's influence
• Intensity Gradient — stronger fields appear more saturated
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
THE QUANTUM APPROACH
Traditional GEX analysis treats levels as binary: price either reaches them or doesn't.
The Quantum Field model recognizes that gamma exposure creates force gradients — continuous zones of influence that extend beyond exact strike prices. Each level acts like a gravitational body, with influence that fades with distance.
This model is based on proprietary research into how dealer hedging flows create measurable "field effects" in price action:
▸ MAGNETS (Attractors)
Zones where balanced positioning creates price stability.
Price tends to drift toward these levels during low-volatility regimes.
▸ WALLS (Repulsors)
Zones of concentrated one-sided exposure.
Price experiences friction and often reverses at these boundaries.
The gradient visualization shows where influence is strongest (center) and where it fades (edges) — giving you a more intuitive read on market structure.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
KEY FEATURES
▸ Ticker Switcher
Select ES, SPX, or SPY directly in settings.
Data converts automatically. One script, three instruments.
▸ Max Levels Control
Display 5 to 30 quantum fields based on your preference.
Reduce clutter or see the full picture.
▸ Gradient Visualization
Smooth linefill gradients show field intensity decay.
Adjust smoothness and scale to match your style.
▸ Rich Tooltips
Hover for details: Lagrange boundaries (L↑/L↓), field width, GEX values.
▸ Color Customization
Adjust Magnet and Wall colors, transparency levels.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
HOW TO READ THE FIELDS
Each field represents a zone of market influence:
• Cyan/Teal gradient = MAGNET (price attractor)
• Pink/Magenta gradient = WALL (price repulsor)
• Denser gradient = stronger influence
• Wider field = larger zone of effect
• Center line = exact strike level
The key insight: price doesn't just "touch" levels — it enters fields of influence.
Watch how price behaves as it approaches field boundaries, not just centers.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
PRO TIP: FIELD CONFLUENCE
The most significant zones occur when multiple fields overlap:
• Magnet + Magnet = Strong attractor (price magnet)
• Wall + Wall = Hard boundary (likely reversal)
• Magnet + Wall = Transition zone (watch for breakout or rejection)
Combine with the TLADe GEX Dashboard for complete analysis:
Fields show WHERE influence exists, traditional levels show exact strikes.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
ABOUT THE DATA
The fields shown use a static snapshot for demonstration.
For current session data with live Quantum Field calculations, export fresh scripts from the TLADe terminal at tradelikeadealer.com
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
RELATED
► TLADe GEX Dashboard — Traditional GEX levels with histogram profilehttps://it.tradingview.com/script/pl7cjJzJ/
━━━━━━━━━━━━━━━━━━━━━━━━━━━━
DISCLAIMER
This tool is for informational and educational purposes only.
It does not constitute financial advice. Trading involves significant risk.
The Quantum Field model is a proprietary visualization framework — past structure does not guarantee future behavior.
BEP Level by Jitendra
BEP Level Indicator "Break-Even Zone"
Overview Summary of This Indicator
Options Break-Even (BEP) indicator that calculates and plots Call & Put BEP levels using real option premiums.
It helps option sellers identify the true no-profit / no-loss price zone directly on the chart.
This indicator is ideal for NIFTY, BANKNIFTY, SENSEX, BANKEX, and NSE stocks.
Dynamically builds ATM option symbols (CE & PE)
Fetches option premiums from NSE / BSE
Calculates Call BEP & Put BEP
Displays forward-only or historical BEP levels
Highlights the BEP trading zone
Triggers alerts when price enters the BEP zone
Key Features
Accurate Options BEP Calculation
Uses real CE & PE option premiums
Supports Daily / Weekly / Monthly BEP
Manual ATM Strike & Expiry control
BEP Zone visualization
Forward-only clean BEP levels
Historical BEP tracking (optional)
Alert when price enters BEP zone
Designed for option sellers & range traders
How BEP Is Calculated
Call BEP = ATM Strike + Call Premium
Put BEP = ATM Strike − Put Premium
Between Call BEP & Put BEP
Price inside zone → Option sellers break even
Price outside zone → One side starts losing
Premium source can be selected as:
Previous period close
Today’s open
Live premium
Supported Instruments
Fill Right Option Expiry Dates in Setting
NIFTY
BANKNIFTY
SENSEX (BSX)
BANKEX (BKX)
NSE Stocks
Display Modes
Only Next BEP
Shows forward-projected BEP levels only
Best for live trading
Clean & clutter-free view
Next + Historical
Displays past BEP levels
Optional shaded BEP zone
Useful for analysis & back testing
ATM & EXPIRY SETTING
Premium Data Retrieval (Core Logic)
Previous Period Close
request.security(symbol, tf, close )
Current Period Open
request.security(symbol, tf, open)
Live Premium
request.security(symbol, timeframe.period, close)
Data Flow Summary
Chart Symbol
↓
Instrument Detection
↓
Prefix + Expiry + Strike
↓
Option Symbol (CE / PE)
↓
request.security()
↓
Premium Selection
↓
BEP Calculation
Data Safety & Performance Considerations
Uses dynamic_requests=true to allow runtime symbol creation
No loops → avoids request limit issues
Premiums are fetched only for:
One Call option
One Put option
Optimized for real-time usage
Thanks
TradingView Community
House Rules SuperTrend Strategy (ATR-Based, Non-Repainting)📝 DESCRIPTION
Overview
The House Rules SuperTrend Strategy is a clean, rule-based trading strategy built using Pine Script® v6.
It is designed for transparent backtesting, non-repainting signals, and simple trend-following execution across all markets and timeframes.
This strategy uses TradingView’s built-in SuperTrend indicator, which is derived from Average True Range (ATR), to identify trend direction changes and generate long and short trades.
How the Strategy Works
Long Entry
A long position is opened when the SuperTrend flips from bearish to bullish
This confirms a potential upward trend shift
Short Entry
A short position is opened when the SuperTrend flips from bullish to bearish
This confirms a potential downward trend shift
Exits
Positions are closed when either:
The opposite SuperTrend signal appears, or
The ATR-based Stop Loss or Take Profit is reached (if enabled)
All signals are calculated on confirmed candle closes only, ensuring accurate and fair backtesting.
Risk Management
Optional ATR-based Stop Loss
Optional ATR-based Take Profit
Position sizing based on percentage of equity
Commission included for realistic performance results
All parameters are user-adjustable from the settings panel.
Backtesting & Transparency
This is a strategy, not an indicator
No repainting
No future data usage
No hidden filters
No lookahead bias
Fully compatible with TradingView’s Strategy Tester
Users are encouraged to test different symbols, timeframes, and parameter values to suit their trading style.
Recommended Use
This strategy can be used on:
Cryptocurrencies
Forex
Stocks
Indices
Futures
It performs best in trending market conditions and may underperform during low-volatility or ranging markets.
Disclaimer
This script is provided for educational and research purposes only.
It is not financial advice. Always test and validate strategies before using them in live trading.
V7 BOOM SNIPER PRO P2 free trial🔥 V7 BOOM SNIPER PRO (P1 & P2)
I’ve published two advanced TradingView indicators on my profile, built to help traders analyze the market more clearly and avoid weak entries.
🔹 Clear trend and market structure
🔹 High-quality entry zones with controlled risk
🔹 Smart filtering to reduce false signals
🔹 Supply & Demand, Order Blocks, and Break & Retest logic
🔹 Suitable for scalping, intraday, and swing trading
🔹 Works across all markets and timeframes
You’re welcome to test the indicators directly on my TradingView page and explore how they behave on real charts.
this is part 2
Binary Options Signals Provider M1-H4 [TradingFinder]🔵 Introduction
Binary Options trading is highly sensitive to timing, precision, and short-term price reactions. Unlike other trading styles, entries in binary markets must be executed at exact moments when price behavior, momentum, and liquidity conditions align within a very limited time window.
This Screener is designed to generate Binary Options trading signals based on pure price action analysis, market structure, and liquidity behavior rather than lagging indicators. The signals are not random alerts; they are produced only when price reacts at critical decision points defined by supply and demand zones.
The core logic focuses on how price behaves when it reaches areas of concentrated orders, where liquidity absorption or injection typically leads to fast directional moves. These reactions are evaluated through candlestick structure, momentum shifts, and false breakout behavior, which are essential for short-duration binary setups.
By combining order blocks, Fair Value Gaps, imbalances, and breaker structures with strict candlestick confirmation, this indicator identifies high-probability Long and Short Binary Options signals suitable for short-term expirations across multiple timeframes.
Rather than predicting the market, the indicator reacts to real-time order flow and liquidity interaction, making it a structured and disciplined tool for traders who rely on precise execution in Binary Options environments.
Long Signal :
Short Signal :
🔵 How to Use
The first step is to identify valid structural zones such as order blocks, Fair Value Gaps, imbalances, or breaker structures. These zones represent areas where order flow has previously shown a strong directional response and where future reactions are likely to occur.
Once a zone is identified, the indicator continuously monitors price behavior as it approaches and interacts with that area. A signal is generated only when price reaches a valid zone, liquidity behavior becomes evident, and a confirming candlestick structure forms in alignment with the expected direction.
This approach ensures that Binary Options signals are issued only during moments of active market participation, where short-term directional moves have the highest probability of success.
🟣 Long Signal
A Long Binary Options signal is generated when price reaches a validated demand zone, such as a bullish order block, an unfilled bullish Fair Value Gap, a lower-structure imbalance, or a bullish breaker.
As price enters the demand area, the indicator evaluates whether sell-side liquidity is being absorbed. This is reflected through changes in candlestick structure and momentum behavior.
Confirmation occurs when bullish price action patterns form, including structures such as :
Pin Bars with long lower wicks
Bullish Engulfing patterns
Rejection candles
False breakouts of local lows
Short-term momentum continuation after liquidity sweep
When these conditions align within or near the demand zone, the indicator issues a Long signal, indicating a high-probability bullish reaction suitable for Binary Options execution with short expirations.
🟣 Short Signal
A Short Binary Options signal is generated when price reaches a validated supply zone, such as a bearish order block, a bearish Fair Value Gap, an upper-structure imbalance, or a bearish breaker.
In these areas, price often collects buy-side liquidity above nearby highs before reversing. The indicator monitors this behavior and waits for clear bearish confirmation through candlestick structure and momentum shift.
Bearish confirmation patterns include :
Pin Bars with long upper wicks
Bearish Engulfing patterns
Rejection candles
Indecision followed by strong bearish displacement
False breakouts of local highs
Once price confirms rejection or liquidity exhaustion within or near the supply zone, the indicator generates a Short signal, highlighting a short-term bearish opportunity optimized for Binary Options trading.
🔵 Settings
Last Candle in Signal Direction: When On, a signal is issued only if the last candle moves in the direction required by the signal.
Signal in Nearly Zone : When enabled, the signal becomes valid even if the candle is near the zone rather than strictly inside it. When disabled, only signals formed inside the zone are allowed.
Table on Chart : This setting enables or disables the on chart screener table. When enabled, the table displays signal status, correlation information, and symbol data directly on the chart. When disabled, the chart remains clean with no table overlay.
Number of Symbols : This option controls how many symbol pairs are displayed in the screener table. Users can choose between four or six pairs depending on screen size and personal preference.
Table Size : This setting adjusts the visual scale of the screener table. Smaller sizes are suitable for minimal layouts, while larger sizes improve readability when monitoring multiple pairs simultaneously.
Table Mode : This setting offers two layout styles for the signal table.
Basic mode displays symbols in a single vertical column, using more vertical space and providing straightforward readability.
Extended mode arranges symbols in pairs side by side, optimizing screen space with a more compact and efficient layout.
Table Position : This option defines where the screener table is placed on the chart. The table can be positioned in any corner or central area to avoid overlapping with price action or other indicators.
🔵 Conclusion
Binary Options trading requires precise timing, disciplined execution, and a clear understanding of short-term market behavior. This indicator is built on the principle that high-quality binary signals emerge not from prediction, but from real-time price reactions at key liquidity zones. By combining supply and demand analysis with structural elements such as order blocks, Fair Value Gaps, imbalances, and breaker structures, the indicator filters out random price movements and focuses only on moments when the market is actively responding to order flow.
Signals are generated exclusively when price reaches a validated zone, liquidity behavior becomes evident, and a confirming candlestick forms at the correct location. This structured process helps reduce emotional or impulsive entries and maintains consistency in execution. Rather than acting as a standalone decision-maker, the indicator functions as a confirmation and timing tool, assisting traders in identifying high-probability Long and Short Binary Options setups across multiple timeframes while remaining aligned with the underlying mechanics of price and liquidity.
สคริปต์แบบชำระเงิน
Price Action ICT SMC - Crypto Lidya (Pro)ONE CHART. ONE FLOW.
Rule-based PA + ICT + SMC — not “signals,” a system.
This product isn’t built to stack more drawings on your chart. It’s built to clarify context and enforce the same decision flow across any market and timeframe.
First direction & location (Premium/Discount – PD), then structure (CHoCH/BOS), followed by liquidity (sweeps/pools), and finally execution zones (OB/BB/FVG/BPR).
All inside one framework, driven by one consistent logic.
What it actually solves:
- “What’s happening?” → answered with market structure.
- “What matters?” → filtered by liquidity and PD positioning.
- “Where’s the trade idea?” → defined as an area, via OB/BB + FVG/BPR confluence.
- “Why is my chart a mess?” → fixed with Limit to Nearest: it prioritizes and displays only the most relevant levels closest to price.
- “When do I act?” → handled through a structured alert flow (Confirm / Created / Retest / Touch events).
Bottom line: This isn’t a toy that sprays “signals” everywhere. It’s a professional, market-structure-first engine that builds a disciplined workflow: Structure + Liquidity + Confirmation → one decision flow.
Note: To try the full Pro feature set for free, use Price Action ICT SMC – Crypto Lidya (Lite), which is already published on TradingView.
Lite includes the same tools and logic as Pro, but it only works on DOGE, TSLA, and EURUSD charts - making it the best way to test the workflow before upgrading.
1.) PA • Performance is the module that controls speed and chart clarity from one place.
Analysis and drawings run within the selected number of bars, preventing unnecessary historical clutter.
- Smoother experience: Reduces load in multi-module workflows (OB/FVG/BPR/Structure, etc.).
- Cleaner chart: Highlights the current flow and cuts visual noise.
- Controlled scope: Only as much history and objects as you actually need.
📌 Before/After visual placeholders:
Before: Higher bar count → denser drawings/labels
After: Optimized bar count → cleaner, more readable flow
2.) ICT • Bias Dashboard is a top-down directional context panel built on market structure (not indicators).
It summarizes your selected timeframe stack in one table, so you can align direction at a glance without jumping between TFs.
- Structure-based bias: Shows ▲ UP / ▼ DOWN / N/A derived from swing structure (HH+HL vs LL+LH), not moving averages.
- TF Stack control: Configure up to 6 timeframe slots and set Swing Type per slot (Extreme/Major/Medium/Minor) to match your style.
- Reason column (optional): Turn on Show Bias Reason to display the logic behind each bias in plain text.
- Active TF row: Highlights the current chart timeframe context inside the dashboard for instant alignment.
- Visual-only panel: Designed as a clean decision aid (doesn’t change detections/alerts).
One glance bias dashboard → faster, cleaner top-down confirmation
3.) SMC • Labels & EQ Pools is a structure + liquidity labeling layer designed to keep your chart clean, readable, and actionable.
It prints HH/HL/LH/LL on confirmed pivots and marks EQH/EQL as liquidity pools—so you spot key targets and traps instantly.
- Structure labels: Fast HH/HL/LH/LL read for trend and shifts.
- EQ Pools: Flags equal highs/lows (EQH/EQL) as high-interest liquidity zones.
- Advanced controls: Balanced (auto tolerance via ATR%/Median Spread) or Manual (tick-precision) to fit any market/timeframe.
- Anti-clutter modes: Filter labels by BOS/CHoCH context to show only what matters.
This screenshot shows SMC • Labels & EQ Pools in action with the Advanced tolerance controls.
Confirmed pivots are labeled as HH/HL/LH/LL, while equal highs/lows are flagged as EQH/EQL liquidity pools for instant target recognition.
4.) SMC • Liquidity Sweep • Core & Sources is the liquidity-engine that tracks key pools and flags true sweep / stop-hunt events inside your PA + ICT + SMC workflow.
It supports 3 liquidity types in one feed: EQH/EQL, Swing High/Low (BSL/SSL), and Previous Day High/Low (PDH/PDL).
- 3-source liquidity feed: Toggle EQ pools, swing pools, and PDH/PDL to match your model.
- Sweep tolerance control: Build sweep bands from EQ Tolerance or ATR% for consistent hit/confirm logic.
- Clean LIQ visualization: Draw open liquidity as Lines or Zones (execution bands).
📌 Before/After visual placeholders:
Liquidity Level Display:
Before: Display = Lines → horizontal LIQ levels (minimal, fast read)
After: Display = Zones → LIQ execution bands (tolerance-based boxes)
Limit to Nearest (Liquidity Pools):
Before: OFF → more pools drawn (history-based), higher visual density, Status = Dual
After: ON → only the nearest pools around price (N/2 above + N/2 below), Status = Active
4.1) SMC • Liquidity Sweep • Setup is the confirmation layer that turns a liquidity sweep into a clear, rule-based LIQ SETUP label.
It evaluates the sweep against the LIQ main level (lvl) and its execution band (tol), then prints the setup on the next candle open after confirmation (within the selected Lookback).
Preset-driven workflow: Pick the confirmation strictness that fits your style.
- Quick: Wick hits the outer band, then closes back to the main level (lvl) (fastest, minimal rules).
- Textbook: Same reclaim close to lvl plus opposite candle color (cleaner confirmation).
- Strict: 2-candle confirm (Reclaim + Follow-Through) with stronger rejection rules (highest selectivity).
- All: Any preset can trigger; the label prints the preset name (priority: Strict > Textbook > Quick).
This chart shows SMC • Liquidity Sweep • Setup in action with the Textbook preset enabled.
The script tracks Swing BSL/SSL liquidity, detects the sweep, and prints LIQ SETUP labels only after confirmation—turning stop-hunts into clean, rule-based execution context (reclaim + follow-through).
5.) SMC • Market Structure is the structural backbone of the system. It defines the valid trend, the valid shift, and the valid break—so every Liquidity/OB/FVG/BPR event is interpreted in the correct context.
- BOS / CHoCH engine: Prints continuation (BOS) vs reversal (CHoCH) from confirmed swing structure.
- Structure Scope: Locks analysis to the exact structure layer you trade (macro → micro), preventing “wrong-layer” signals.
- Swing Type: Controls pivot strictness—Minor for responsiveness, Major/Extreme for higher-quality structure.
📌 Swing Type — Before/After visual placeholders:
Before: External Swing Type = Major + Structure Scope = External → Higher-order structure is tracked; BOS/CHoCH prints are selective and represent macro structural shifts.
After: External Swing Type = Major + Structure Scope = Internal → The macro swing anchor is preserved, while BOS/CHoCH is evaluated on the internal execution layer for earlier, more responsive confirmation.
6.) SMC • CHoCH is the structure-turning-point marker produced by the Swing Structure engine. It prints the first meaningful break against the current structure direction (Change of Character) and lets you control whether it’s shown and how the break is confirmed.
- Show CHoCH: Hides/shows only the visuals (the structure engine can still keep its state for the system flow).
- CHoCH Confirm Mode: Defines what counts as a valid break (Close / Wick / Body, plus combined rules for stricter or more responsive confirmation).
6.1) SMC • CHoCH • Style controls the on-chart presentation of CHoCH so the structure read stays clean and consistent.
- Line color / width / style
- Label size / alignment (left–center–right) / text
- Label background & text colors
6.2) SMC • CHoCH • Bar Colors optionally paints candles based on the direction of the last confirmed CHoCH—purely visual, not a logic filter.
- ON: Bars reflect the active CHoCH regime (Up/Down) using your chosen colors.
- OFF: Bars remain in the chart’s native colors.
Bar coloring is ON → candles adopt the last confirmed CHoCH direction color (Up/Down) for instant regime clarity.
7.) SMC • BOS prints Break of Structure when price confirms a continuation break in the active structural direction. It’s the textbook “trend-maintenance” break—used to validate continuation and anchor the next liquidity/zone logic.
- BOS logic: Continuation break only (not reversal).
- Confirm mode: Defines what qualifies as a valid break (based on your break confirmation setting).
- Workflow role: Provides the structural “green light” for continuation setups.
7.1) SMC • BOS • Style controls how BOS is presented on-chart to keep the structure read clean and consistent.
- Line style: Color / width / line type
- Label style: Size / text / alignment
- Label colors: Background + text colors
8.) SMC • FVG • Core detects and draws Fair Value Gaps (Imbalance) as textbook 3-candle inefficiencies, and keeps the focus on active (unmitigated) gaps.
- Show FVG: Enables FVG detection + plotting.
- Limit to Nearest: Shows only the nearest active FVGs around price for a clean chart.
- FVG History Count: Sets how many active FVG boxes stay visible (balanced above/below price).
8.1) SMC • FVG • Filters removes noise by enforcing a minimum FVG size threshold.
- Mode: Percent / ATR / Ticks / Absolute
- Minimum Value: Threshold value for the selected mode
- ATR Length: Used only when Mode = ATR
8.2) SMC • FVG • Style controls the visual standard of active FVG zones.
- Fill / Border: Active FVG box colors
- Box Text: Optional label inside the box
- Text Color: Label color
9.) SMC • BPR • Core detects and plots Balanced Price Ranges (BPR) by pairing opposing inefficiencies into a single, actionable zone.
It’s the textbook “balance area” used to map premium/discount reaction zones after displacement.
- BPR logic: Forms a BPR when bullish/bearish imbalances overlap into one balanced range.
- Active zone focus: Keeps the chart centered on relevant, tradable BPRs (not endless history).
- Workflow role: A clean execution zone for reactions, mitigations, and continuation entries—read together with structure + liquidity.
10.) SMC • Zones • OB/BB/SD Shared is the shared rule layer that standardizes how zones are built, filtered, and labeled across Order Blocks (OB), Breaker Blocks (BB), and optional Supply/Demand (S/D) tagging.
- Zone Refinement: Defines zone bounds from the source candle (Body / Wick) or adds a Mean Threshold line inside the zone for textbook mean-reference execution.
- Zone Quality Filter + Tightness: A preset quality gate (Balanced / High Quality / Strict) with a single 1–5 Tightness control to tighten/loosen all thresholds together; BB inherits from OB, so this setting upgrades both.
- Overlap Pruning: When same-side zones overlap beyond a minimum ratio, the engine keeps the stronger zone and removes the weaker to prevent stacking.
- Supply/Demand Tagging: Converts OBs into S/D with Off / Simple / Strength+Context; Strength+Context requires a minimum Strength % and can enforce FVG confluence and/or Liquidity-sweep context.
📌 Before/After visual placeholders:
Before: When the Zone Overlap Threshold is set high, OB + BB zones can stack within the same price band, increasing visual density.
After: When the Zone Overlap Threshold is set low (e.g., 0.2), overlapping OB + BB zones within the same price band are pruned into a cleaner, single-zone output per area. (The pruning logic keeps the stronger zone; if equal, it keeps the most recent.)
Before: With Zone Quality Filter (OB/BB) = No Filter, the engine plots all detected OB/BB candidates, so lower-grade zones can remain on-chart and increase visual density.
After: With Zone Quality Filter (OB/BB) = Balanced, the engine applies a quality gate and suppresses weaker candidates—keeping a cleaner set of zones focused on higher-grade structure.
11.) SMC • Zones • OB (Order Block) detects textbook bullish/bearish Order Blocks and plots them as actionable institutional zones, standardized by the shared refinement + quality rules.
- Bullish / Bearish OB: Built from confirmed structure breaks using the source candle (Body/Wick refinement).
- Mitigation tracking: Updates zone state as price revisits the block (retest/mitigation flow).
- Strength % (0–100): Calculated on a fixed Source → Break window with a weighted model (volume, impulse, body/wick quality, continuity), capped at 100.
- Nearest-first clarity: Limit-to-Nearest keeps OBs focused around current price.
- Alerts: Fully integrated with Any alert() flow: OB Created, OB Retest, and optional OB + FVG Confluence (when enabled, it takes priority over “OB Created” on the same bar).
- Strength % (0–100): Calculated on a fixed Source → Break window with a weighted model:
• 35% directional volume dominance
• 25% impulse (leg range normalized by volume-weighted average candle range)
• 20% source candle body quality (body/range)
• 10% wick quality
• 10% directional continuity (same-direction closes)
12.) SMC • Zones • BB (Breaker Block) marks textbook breaker zones formed when an Order Block is invalidated and flipped into a structured retest level. BBs follow the shared refinement + quality rules, so zone geometry stays consistent across OB/BB.
- Bullish / Bearish BB: Created on OB invalidation → breaker flip (continuation/retest framework).
- Retest / mitigation tracking: BB state updates as price interacts with the zone.
- Nearest-first clarity: Limit-to-Nearest keeps only the most relevant BBs around current price.
- Alerts: Integrated with Any alert() flow: BB Created and BB Retest (First Clean Touch).
- Strength % (0–100) — BB-specific: Starts by inheriting the originating OB Strength. On the invalidation break, it can add a Displacement Break bonus (body-dominant candle closing near the extreme). After creation, strength becomes dynamic: repeated retests apply stepwise decay (from the 2nd touch onward), while the first clean rejection can add a one-time bonus.
13.) PRO USER • SMC • IDM (Inducement) marks the textbook inducement (IDM) point—where price “baits” participation, then takes internal liquidity before the real move.
It highlights the internal liquidity level (the inducement) and flags the setup once that liquidity is taken and followed by a valid shift in structure/flow (per your confirmation settings).
- IDM level mapping: Defines inducement at the internal swing layer (the liquidity price typically raids first).
- Context-first signal: IDM is treated as a prerequisite filter—liquidity first, then structure/continuation logic.
- Execution clarity: Turns “random spikes” into a readable sequence: Induce → Take Liquidity → Shift → Execute.
- Alerts: Integrated into the Any alert() flow for IDM events (IDM mapped / taken / confirmed, depending on your enabled triggers).
Before: IDM (Inducement) is disabled — no inducement mapping is applied, so the chart keeps the standard zone/structure output as-is.
After: IDM (Inducement) is enabled (Internal • Wick Only • Link Window = 30 • Min Separation = 10) — internal inducement is tracked and the on-chart output becomes more selective, prioritizing zones that remain relevant under the IDM workflow.
14.) PRO USER • ICT • PD Range (Premium/Discount) maps the current dealing range and prints the Premium / Discount framework with EQ (midpoint).
It’s the textbook ICT filter that answers one question first: “Is price offering premium (sell-side) or discount (buy-side)?”
- PDH / PDL + EQ: Defines the range high/low and the equilibrium midpoint for clean PD context.
- Range source control: Choose the PD source (your selected timeframe/range basis) to keep PD aligned with your model.
- PD filter for zones: Zones can be evaluated by PD position (premium vs discount) so execution stays context-correct.
- Clean display: Optional shading/lines so PD context is visible without chart clutter.
Before: PD Range is disabled, so zones are displayed without Premium/Discount context and PDH/PDL/50% levels are not shown.
After: PD Range is enabled (Mode: OB+FVG, PD Source TF: 1D) and PDH/PDL/50% is displayed with Premium / Midpoint / Discount markers—so zones are read and validated by PD positioning.
15.) PRO USER • ICT • Displacement marks the textbook impulsive expansion that drives price away from balance and typically precedes imbalance (FVG) and structure confirmation. It standardizes “real displacement” by filtering candles through body/range strength and range-threshold rules.
- Displacement detection: Flags expansion candles where body dominance and range strength meet the selected thresholds (e.g., range vs ATR / percent).
- Confirmation role: Treats displacement as the “commitment leg” that validates structure intent before zones are prioritized.
- Workflow integration: Strengthens the read of FVG / OB / IDM by anchoring them to a qualified impulsive leg.
- Display & alerts: Optional displacement markers/labels and alert hooks for displacement events (when enabled).
16.) PRO USER • ICT • Killzones (Sessions) maps the key ICT dealing windows on your chart, so you can align execution with the sessions where liquidity and displacement most commonly appear.
- Session windows: Plots the selected killzones as on-chart time blocks (clean, standardized session boundaries).
- Session focus: Keeps your workflow anchored to high-activity periods—ideal for sweep → displacement → entry sequences.
- Visual control: Optional shading, labels, and minimal display modes to avoid chart clutter.
- Model alignment: Use killzones as a timing filter on top of Structure / Liquidity / PD context.
This screenshot shows ICT Killzones (Sessions) configured in a NY Open–only workflow.
The blue session shading marks the active dealing window, and Strict outside-session behavior keeps the chart focused by gating key SMC events.
With the session filter enabled (CHoCH/BOS/Sweeps/IDM toggles), the script prioritizes structure + liquidity signals inside the killzone, where displacement and raids are statistically more common—so zones like OB / FVG are read with clean timing context.
17.) Outputs • Alerts is the single “Any alert()” output layer that consolidates the system’s key events into one alert stream (fired once per bar close).
- Master switch: Enable/disable all script alerts without affecting visuals.
- Event routing: Select exactly what gets reported (CHoCH/BOS Confirm, IDM Break, Liquidity Sweep, Sweep→CHoCH/BOS, OB/BB Created + first clean retest, FVG/BPR Created + first clean touch).
- De-dup logic: When a more specific event exists on the same bar, the generic line is suppressed (e.g., Sweep→CHoCH/BOS).
- Spam control: Optional Alert Cooldown (Bars) + Minimum Liquidity Tier (Alerts) gate for liquidity-based events.
After setting up the alert, the flow works like this: on the left, you create a TradingView alert by selecting the indicator and choosing “Any alert() function call” (Any Alert) as the condition.
When an enabled event triggers, an alert entry appears on the right in the Alerts panel, and the message clearly shows the event name and direction.
Options Astra Strategy with Greeks by PoojaOptions Astra Strategy with Greeks by Pooja
Options Astra Strategy with Greeks by Pooja is a rule-based intraday options analysis system designed specifically for option premium charts.
The script combines price action logic, trend structure, and option-specific Greeks insights into a single, organized framework.
Instead of relying on a single indicator, this strategy uses multiple confirmation layers to identify potential BUY and SELL opportunities while filtering out low-quality market noise.
All calculations and signals are generated only after candle confirmation, helping reduce premature or repaint-like behavior.
The script is intended for educational and analytical use, allowing traders to visually study market behavior, trend alignment, and option sensitivity in real time.
🎯 Purpose of the Strategy
The primary purpose of Options Astra Strategy with Greeks is to help traders:
Understand directional bias in option premiums
Identify high-probability trend continuation or reversal zones
Analyze trades with the help of Delta, Gamma, Theta, Vega, IV behavior
Maintain structured decision-making instead of emotional or impulsive entries
This strategy is built to support traders who want:
A systematic framework rather than random signals
Clear visual structure for entries, trend shifts, and exits
Better awareness of option characteristics, not just price movement
⭐ Key Features
🎯 Option Trading Modes
Supports Option Buying, Option Selling, and Both-side trading
Traders can restrict signals based on their preferred trading style
Helps avoid unnecessary opposite-side signals during focused trading
🎛️ Separate Control: Signals vs Strategy
Independent control for visual signals and strategy execution
Users can analyze signals without enforcing automated trade logic
Useful for discretionary traders and educational analysis
🔀 Dual Strategy Engine
Built-in two independent strategies working together
Signals are generated only when multi-condition alignment is confirmed
Reduces false signals during uncertain market phases
📊 Option Greeks Dashboard (Integrated)
Real-time visualization of Delta, Gamma, Theta, Vega, and IV behavior
Helps understand option sensitivity beyond price movement
Designed for option premium analysis, not just index direction
🛑 Dual Stop Loss System
Supports Swing-based Stop Loss and Candle-based Stop Loss
User can switch methods based on market structure
Stop Loss visualization remains consistent for clarity
🎯 Target & Target Hit Visualization
Automatic target projection lines
Clear Target Hit and Stop Loss Hit labeling on chart
Helps review trade outcomes visually without manual marking
⚖️ Risk Management Controls
Adjustable Risk–Reward Ratio
Minimum stop-loss distance protection
Designed to encourage pre-defined risk planning
🔄 Trend Reverse Protection (TCE)
Built-in Trend Change Exit logic
Closes trades when an opposite confirmed trend appears
Helps reduce exposure during sudden reversals
⏰ Force Exit Mechanism
Optional time-based force exit
Designed for intraday traders to avoid:
Gap-up / Gap-down risk
Overnight option exposure
Particularly useful near market close
[/list}
🚧 Fake Breakout & Sideways Market Filters
Uses ADX, ATR, slope, and structure-based filters
Designed to avoid:
Low-momentum moves
Sideways and choppy conditions
Filters can be enabled or disabled individually
📈 Built-in Trend Tools
Integrated EMA, VWAP, and Supertrend
No need to add external indicators
Clean chart with internally managed calculations
🔁 Oscillator + Non-Oscillator Combination
Combines RSI-based logic with price & trend filters
Helps balance momentum and structure
Avoids over-dependency on a single indicator type
🧩 Optional Supertrend & RSI Filters
Supertrend and RSI filters can be toggled ON/OFF
Allows adaptation to different market environments
Suitable for both aggressive and conservative setups
⚖️Dynamic Stop Loss Trailing Through Trend Reversal
This strategy includes a dynamic stop-loss trailing mechanism based on trend reversal detection rather than fixed price movement.
When the trade is active, the system continuously monitors trend direction and structure
If a confirmed trend reversal is detected against the open position, the strategy exits the trade automatically
This exit acts as a dynamic trailing stop, adapting to changing market conditions instead of relying on static stop-loss levels
🔔 Alerts & Automation
BUY / SELL alerts on confirmed candles only
Webhook compatible
Suitable for Telegram, Tradetron, and automation
📢 Optional Telegram alerts can be used for personal signal notifications. This feature is informational and does not imply trade execution or profit guarantees.
🌟 Why This Strategy Is Unique
Most trading tools rely on a simple combination of indicators but Option Astra Strategy is made with different logics and 2 Strategies combo with oscillators and non oscillators.
Options Astra Strategy with Greeks is designed differently.
It combines multiple independent logics instead of a single signal source
Focuses on decision structure, not prediction
Integrates option Greeks behavior with price and trend logic
Includes trend protection, risk controls, and exit discipline in the same framework
This approach is intended to help traders stay systematic and consistent, especially during emotionally challenging market conditions.
The goal is not to increase trading frequency, but to improve trade quality and clarity.
👤 Suitable For
This script may be suitable for traders who:
Trade intraday options on premium charts
Prefer rule-based analysis over discretionary guessing
Want to understand option behavior (Greeks & IV) alongside price action
Use defined risk management and fixed trading plans
Want a clean, all-in-one system without stacking many indicators
Trader who want Advanced Setup which can help in Risk Management, Discipline and Psychology control etc,
Regular Option Buyers, Option Sellers or Both.
🔒 Why Invite-Only
Internal state tracking
Reset logic
Independent signal engines
Option-specific intelligence architecture
Source protected to preserve originality
⚠️ Disclaimer
For educational and analytical purposes only.
No financial advice or profit guarantees.
All signals are rule-based and non-predictive.
Option Greeks are formula-based analytical estimates.
Past or real-time signals do not imply future performance.
All trading decisions and risk management are the user’s responsibility.
gva8kاستراتيجية الاستاذ حسين محمد التي تعتمد على الفلك الخامس
للتفاصيل عن المؤشر تابع قناة التليكرام
قناة التليكرام
حساب الانستا
--------------------------------------------------------------------
Hussein Mohammed’s strategy based on the Fifth Astrology Cycle
For more details about the indicator, follow the Telegram channel:
Telegram Channel
Instagram Account
LANDRAID BTC 1d Strategylandraid BTC 1d chart strategy
base on 1day support and resistance
high win rate and high P&N
some imortant indicators are WR ， MACD , EMA200 , EMA60 ， MA20
[MIT]Momentum No2Indicator Designed for Medium-to-Long-Term Trend Traders
A dynamic channel indicator that integrates an adaptive bandwidth algorithm with a volatility-based trailing stop mechanism, automatically adjusting channel width and stop levels across varying market volatility environments.
Key Features:
Channel width intelligently expands or contracts based on real market volatility, preventing overly tight bands in ranging markets or excessively wide bands in trending markets
Built-in intelligent trailing stop with clear visual dynamic protection levels, helping traders capture trends while effectively controlling drawdowns
Clean interface featuring distinct bullish/bearish background coloring + minimalistic entry arrows for at-a-glance readability
Particularly effective on ETH, BTC, DOGE at the 1-hour timeframe for identifying high-probability structural breakouts
Best Used For:
Finding low-risk pullback or breakout entries during trending phases
Early confirmation of regime shifts from range-bound to trending conditions
Serving as a powerful filter or confirmation tool in multi-factor or discretionary trading systems
为中长线趋势交易者设计的动态通道指标，融合了自适应上下带宽算法与波动率止损机制，能够在不同市场波动环境下自动调整通道宽度与止损位置。
核心特点：
通道宽度随市场真实波动强度智能伸缩，避免在震荡市过于收窄或趋势市过于宽松的问题
内置智能止损，提供视觉化的动态保护位参考，帮助捕捉趋势的同时有效控制回撤
清晰的多空背景色 + 极简进场箭头，画面干净，一目了然
适合 ETH BTC DOGE 1小时级别寻找高确定性结构突破
适用场景：
趋势行情中寻找低吸/突破机会
震荡转趋势的早期确认
作为多因子/主观交易的辅助过滤工具
OrangePulse v3.0 - Advanced Multi-Strategy DCA Bot
OrangePulse v3.0 is a comprehensive automated trading system featuring four distinct strategies designed for various market conditions: Mean Reversion, Trend Pullback, Breakout, and High-Frequency Scalping.
💼 Core Features:
- Multiple Algorithms: Switch between Trend-following and Counter-trend strategies.
- Unlimited DCA: Highly customizable Safety Order ladder with exponential volume and step scaling.
- Professional Risk Management: Advanced Trailing Take Profit (3-stage), Stop Loss, and Emergency SO logic.
- Platform Integration: Built-in webhook dispatchers for automated execution.
- Advanced Visualization: Real-time status dashboard and interactive chart levels.
This is a protected, invite-only script. It is designed for traders who require a robust, automated framework for managing complex trading positions without emotional bias.
🔗 How to get access:
Due to House Rules, I cannot provide direct links or pricing here. If you are interested in using this script or have any questions about its functionality, please send me a Private Message (PM) or check the "Identity" section in my profile.
⚠️ Disclaimer: Trading involves significant risk. This script is a tool to assist in decision-making and does not guarantee profits.
OrangePulse v3.0 Lite - Educational DCA StrategyThis open-source script is a simplified version of the OrangePulse algorithm, designed for educational purposes to demonstrate the power of Dollar Cost Averaging (DCA) and Mean Reversion.
📈 Strategy Logic:
The script uses a combination of Bollinger Bands and RSI (Relative Strength Index) to identify potential mean reversion opportunities.
- Entry: Triggered when price pushes below the lower Bollinger Band while RSI is in oversold territory.
- Management: Utilizes up to 3 Safety Orders (DCA) to improve the average entry price during pullbacks.
🎯 Features:
• Customizable Volume Scale and Step Scale for Safety Orders.
• Visual AVG price line and TP/SL levels.
• Time-window filter for backtesting.
• Real-time Status Table for position monitoring.
This script is shared in the spirit of open-source development on TradingView. It is intended to help traders understand how automated position building and risk management work in volatile markets.
Check my profile status/bio for more information on our project.
⚠️ Disclaimer: For educational purposes only. Past performance does not guarantee future results.
ASC Trio Trader SignalASC Trio Trader Strategy — Description for TradingView
Short Description:
ASC Trio Trader is a powerful trading strategy combining Bollinger Band Breakouts with SuperOscillator trend confirmation to generate precise buy and sell signals. Ideal for traders seeking trend-following signals with reduced noise and clear entry/exit points.
Strategy Logic:
Bollinger Band Breakouts
Uses a configurable SMA (default 55) and standard deviation (default 1.0) to calculate upper, middle (basis), and lower bands.
Buy signal is considered when price closes above the upper band.
Sell signal is considered when price closes below the lower band.
SuperOscillator Confirmation
Trend momentum is confirmed using a SuperOscillator (green/red candles).
Buy signal triggers only when BB breakout + above middle line + green SuperOscillator.
Sell signal triggers only when BB breakout + below middle line + red SuperOscillator.
Signal Lock / Unlock Mechanism
Prevents repeated signals during strong trends.
Once a buy is triggered, the next buy will not occur until price closes below the middle line.
Once a sell is triggered, the next sell will not occur until price closes above the middle line.
Auto Exit
Positions are automatically closed when an opposite signal occurs.
Features:
One-click strategy: Ready for backtesting in TradingView.
Dynamic Bollinger Bands: Middle line changes color based on price relative to bands.
Visual signals: Clear buy (green) and sell (red) arrows plotted on chart.
Customizable inputs: SMA length, standard deviation multiplier, source, and backtest range.
Color-coded bars: Highlights market direction for easy trend identification.
Backtest window: Allows you to test the strategy over a custom date range.
Default Inputs:
Input Default
Source Close
SMA Length 55
Std Dev Multiplier 1.0
Color Bars True
Backtest Range 01-01-2018 to present
How to Use:
Add the strategy to any chart.
Use default inputs or customize SMA and Std Dev based on asset volatility.
Enter trades when arrows appear (green for buy, red for sell).
Monitor automatically managed exits or use additional risk management.
Notes:
Designed for trend-following markets; works best in volatile stocks, crypto, and commodities.
Not based on volume or fundamentals; consider using additional indicators for confirmation.
Always apply proper risk management.
DkS Market Structure Breakout Strategy Crypto & ForexDkS Market Structure Breakout Strategy Crypto & Forex
🔍 Overview
DkSPro – Universal Market Analysis is a structure-based trading strategy designed for Crypto and Forex markets, focused on trend alignment, breakout confirmation, and volume validation.
This strategy is built to filter low-quality trades, avoid ranging conditions, and reduce false breakouts by requiring multiple layers of confirmation before any trade is executed.
It is intended for scalping and intraday trading, prioritizing consistency and risk control over trade frequency.
🧠 Strategy Logic (How It Works)
DkSPro follows a sequential decision process, not a single-indicator signal:
Trend Bias (EMA Structure)
A fast and slow EMA define the directional bias.
Long trades are only allowed during bullish EMA alignment.
Short trades are only allowed during bearish EMA alignment.
This prevents counter-trend and ranging-market entries.
Market Structure & Breakout Validation
The strategy identifies recent swing highs and lows.
Trades are triggered only after a confirmed breakout of structure, not during consolidation.
This avoids early entries and false momentum moves.
Volume Confirmation
Volume must exceed its moving average by a defined multiplier.
This ensures participation and filters out low-liquidity breakouts.
Volume thresholds adapt depending on the selected trading mode.
Momentum Confirmation (RSI)
RSI is used strictly as a momentum filter, not as a standalone signal.
It confirms that price movement aligns with the breakout direction.
Risk Management (Mandatory)
Every position includes a predefined Stop Loss and Take Profit.
Position sizing is based on a fixed percentage of equity, keeping risk per trade within sustainable limits.
All conditions must align simultaneously; otherwise, no trade is executed.
⚙️ Trading Modes
SAFE Mode
Stronger volume and RSI thresholds
Fewer trades, higher selectivity
Designed for risk control and consistency
AGGRESSIVE Mode
Slightly relaxed filters
Higher trade frequency during strong momentum
Intended for experienced users only
📊 Markets & Assets
This strategy has been actively used and tested on:
🟢 Crypto (Binance / Binance.US)
SOL-USDT
XRP-USDT
Other high-liquidity pairs (BTC, ETH)
Crypto mode benefits from stronger volume confirmation to adapt to higher volatility.
🔵 Forex
Major pairs such as EURUSD, GBPUSD, USDJPY
Optimized for liquid markets with lower relative volume
The same structural logic applies to both markets, with volume behavior naturally adapting to each asset class.
⏱ Recommended Timeframes
Crypto: 5m – 15m
Forex: 15m – 1H
Lower timeframes (1m) are not recommended due to noise and unreliable volume behavior.
🧪 Backtesting & Settings Transparency
Default strategy properties are intentionally conservative to reflect realistic conditions:
Initial capital: $20,000
Position size: 2% of equity
Commission: 0.08%
Slippage: 1 tick
Fixed Stop Loss and Take Profit on every trade
Backtests should be performed on sufficient historical data (ideally 6–12 months) to ensure a statistically meaningful sample size (100+ trades).
📈 Originality & Usefulness
DkSPro is not a simple indicator mashup.
Each component serves a specific role in a layered confirmation system:
EMAs define direction
Structure defines timing
Volume validates participation
RSI confirms momentum
Risk management controls exposure
Removing any layer significantly reduces signal quality. The strategy is designed as a complete decision framework, not a signal generator.
⚠️ Important Notes
This script is an analysis and execution tool, not financial advice.
Market conditions change, and no strategy performs well in all environments.
Users are encouraged to backtest, forward test, and adjust position sizing according to their own risk tolerance.
🧩 Version Notice
This publication represents a consolidated and refined version of an internal experimental script.
No parallel or duplicate versions are intended.
All future improvements will be released exclusively using TradingView’s Update feature.
🇪🇸 Descripción en Español (Resumen)
DkSPro es una estrategia basada en estructura de mercado, diseñada para Crypto y Forex, que combina tendencia, ruptura de estructura, volumen y control de riesgo.
Solo opera cuando todas las condiciones se alinean, evitando rangos, falsas rupturas y sobreoperar.
Ha sido utilizada en Binance con pares como SOL-USDT y XRP-USDT, así como en Forex, siempre con gestión de riesgo fija y condiciones realistas.
