EMA Scalper Pro BY FS and Grok
- Main Configuration (Inputs)
When adding the indicator, you'll see a settings panel divided into groups. Here's the key ones and recommendations for your setup (60x on BTC at open):
EMA Configuration:
"EMA Fast Period" (default 7): Fast EMA for momentum. Lower for faster signals (e.g., 5-9).
"EMA Slow Period" (default 25): Slow EMA for trend. Increase for more stable trends (e.g., 20-30).
"Show EMAs" (true): Displays blue (fast) and orange (slow) lines. Turn off if the chart is cluttered.
Candle Patterns:
"Confirmation Candles" (default 2): Bars to check patterns (e.g., hammer, engulfing). Increase to 3-4 for fewer false signals.
"Enable Patterns" (true): Activates bullish/bearish pattern filter. Useful for signal confirmation.
Market Structure:
"Pivots Lookback" (default 5): Bars to detect higher highs/lower lows. Adjust to 3-7 for BTC volatility.
"Show Labels" (true): Draws "Uptrend" (green) or "Downtrend" (red) on pivots.
"Filter by Trend" (true): Buy signals only in uptrend, sell in downtrend. Enable to avoid counter-trend trades.
Volume Confirmation:
"Volume MA Length" (default 14): Period for volume average. Lower for sensitivity.
"Z-Score Threshold" (default 2.0): Threshold for spikes. Lower to 1.5 for more signals.
"Enable Volume Confirmation" (true): Requires volume spike for signals.
Liquidity Zones:
"Minimum Reaction ($)" (default 400): Minimum move for a zone. Adjust based on BTC volatility.
"Max Zones to Show" (default 20): Limit of boxes (green for buy/low, red for sell/high).
"Zone Width (x ATR)" (default 0.5): Width based on volatility. Increase for wider zones.
"Show Liquidity Zones" (true): Draws horizontal boxes.
"Enable Alerts" (true): Alerts when entering a zone (e.g., "Price entered Liquidity Buy Zone").
Order Blocks Detection:
Similar to liquidity: "Minimum Reaction" (400), "Max" (20), "Width" (0.5), "Show" (true), "Alerts" (true).
Boxes: Lime for bull (support), fuchsia for bear (resistance).
Fair Value Gaps Detection:
"Minimum Gap ($)" (default 50): Minimum gap for FVG.
"Max FVGs" (20): Limit of boxes (teal for bull, maroon for bear; gray if mitigated).
"Show FVGs" (true): Draws gaps.
"Enable FVG Alerts" (true): When entering (e.g., "Price entered Bullish FVG").
"Enable FVG Mitigation Alerts" (true): When filling gap (e.g., "Bullish FVG Mitigated").
Higher TF Table: "Show Table" (true): Displays table with EMA crosses on 5m, 15m, etc. (TF, Dir: Bullish/Bearish, Bars since cross).
Recommendation for your setup: Keep defaults to start. On 1m/5m, enable all filters for precision in 60x. Test in demo before live.
- How to Interpret the Indicator on the Chart
EMA Lines: Blue (fast), orange (slow). Bullish cross (blue over orange) = potential buy; bearish = sell.
Confirmed Crosses: Green cross below (buy), red above (sell), offset to align with candle.
Trend Labels: "Uptrend" green on highs, "Downtrend" red on lows. Indicates structure (HH/LL).
Liquidity Zones: Extended horizontal boxes. Green (buy/support), red (sell/resistance). Expect reactions (bounce/break) when touched.
Order Blocks: Lime boxes (bull/support), fuchsia (bear/resistance). Areas where accumulated orders can cause reactions.
FVGs: Teal boxes (bull/imbalance up), maroon (bear/imbalance down). Unfilled gaps; gray if mitigated (gap closed).
Final Signals: Green triangle below (buy), red above (sell). Combines everything: cross + patterns + trend + volume.
Higher TF Table: In top-right. Shows for 5m-D: TF, Dir (Bullish green/Bearish red), Bars (since last cross). Useful to align with larger trends.
- Alerts and Notifications
Set up alerts in TradingView: Right-click on the indicator > "Add alert".
Signals: "Buy Signal" or "Sell Signal" when triangle appears.
Zones: When entering box (e.g., "Price entered Liquidity Buy Zone").
OB/FVG: Similar, plus mitigation (e.g., "Bullish FVG Mitigated" when gap fills, signaling potential continuation).
- How to Use in Trading (Tips for Your Setup)
Timeframe: 1m/5m for scalping at open (9:30 AM ET, influenced by traditional markets).
Strategy: Wait for signal (triangle) near zone/OB/FVG, with volume and trend aligned. In 60x, use stops at ATR (e.g., 1-2x ATR) and takes at 1:2 ratio. Low exposure (3-5 min/trade).
Risk: Always backtest (in TradingView) and use 1-2% capital per trade. Not financial advice; combine with your analysis.
Customization: Disable filters for more signals, but increases risk. For volatile BTC, lower reaction/gap thresholds.
Moving Averages
Multiple indicator for futures in scalping"Multiple indicator with:
EMA 8, 20, 50, 100, 200
Bollinger Bands
Daily, weekly, and monthly OHLC
Fibonacci pivot points R1R2R3/S1S2S3
VWAP
It works very well for futures, to see where to enter and exit, and to get positioned. I mostly use it on the Nasdaq and DAX, where the price constantly bounces in the areas marked by this indicator. It’s only for scalping, ideal on a 1-minute chart."
GK V2 Zero-Lag trend Ribbon GK Zero-Lag Trend Ribbon V2 is the same as version 1 but with a trend ribbon to help identify the trend. Designed to help keep traders aligned with clean market direction, it uses a Zero-Lag EMA based trend ribbon with adaptive volatility bands to clearly identify bullish and bearish trends wile filtering out noise with signal prints. The ribbon dynamically changes colour to show trend bias, and GK BUY / GK SELL only print on confirmed trend flip- one clean signal per trend no clutter
Predictive ZLEMA NavigatorThis is an advanced trend-following indicator that combines Zero-Lag Exponential Moving Averages (ZLEMA) with predictive crossover analysis to identify high-probability trade entries with exceptional timing precision.
Key Features:
1. Zero-Lag Technology
Utilizes ZLEMA calculation to eliminate the inherent lag found in traditional EMAs
Provides faster response to price movements while maintaining smooth trend identification
Default periods (34/89) align with Fibonacci sequence for natural market rhythm detection
2. Predictive Crossover System
Unique algorithm forecasts upcoming Golden Cross and Death Cross events before they occur
Displays estimated bars until next crossover, giving traders advance preparation time
Helps avoid late entries by signaling trend changes up to 200 bars in advance
3. Visual Direction Arrows
Color-coded projection arrows show the momentum trajectory of both fast and slow ZLEMAs
Adjustable projection length allows customization for different trading timeframes
Instantly identifies whether trends are strengthening or weakening
4. Multi-Layer Signal Confirmation
Clear crossover points marked with circles and confirmation ticks
Dynamic fill coloring between MAs for instant trend bias recognition
Bullish signals (green/blue) and bearish signals (orange/red) prevent confusion
Performance Characteristics:
Strengths:
Reduced Whipsaws: ZLEMA's lag reduction minimizes false signals in ranging markets
Early Detection: Predictive algorithm provides 10-50 bar advance warning of trend changes
Versatile Application: Works across all timeframes (1-minute to daily) and asset classes
Visual Clarity: Clean interface prevents information overload while maintaining comprehensive data
Optimal Use Cases:
Swing trading on 4H-Daily timeframes
Trend confirmation for breakout strategies
Portfolio rotation timing based on momentum shifts
Works exceptionally well on trending assets (crypto, indices, trending stocks)
Trading Approach:
Enter long on Golden Cross confirmation with upward direction arrows
Exit or reverse on Death Cross with downward momentum projection
Use prediction labels to scale into positions before actual crossover
Combine with volume analysis for enhanced confirmation
Built-in Alert System: Automated notifications for both bullish and bearish crossovers ensure you never miss a trading opportunity.
This indicator bridges the gap between reactive and predictive trading, giving you the speed of ZLEMA with the foresight of trend projection analysis.
DISCLAIMER: This information is provided for educational purposes only and should not be considered financial, investment, or trading advice.Happy Trading
Multi-Filter Slope Master Pro CareCAdvanced EMA Slope Analyzer with Smart Filters
Key Features:
🔍 Core Analysis
Tracks slopes of 3 EMAs (9, 20, 50)
Multiple slope calculation methods
Requires price + slope confirmation for signals
🛡️ Smart Filters
Multi-timeframe trend confirmation
Volume-based signal weighting
Trading session restriction
📊 Visual Dashboard
Interactive data tables (multiple layouts)
Real-time trend strength histogram
Color-coded signal markers
Customizable themes & positions
📈 Output
Individual EMA signals (Bullish/Bearish/Neutral)
Combined trend strength score
Overall market bias indicator
Chart alerts for signal changes
Purpose: Identify high-probability trend movements by filtering out noise through multiple confirmation layers.
AIO Master Suite: Moving Averages & OscillatorsThe AIO Master Suite: Moving Averages & Oscillators is a comprehensive technical analysis toolkit designed to solve the most common problem traders face: chart clutter. By consolidating over 25 different Moving Average types and a vast array of Oscillators into a single indicator, this tool allows traders to monitor complex market data without sacrificing screen real estate.
Instead of stacking multiple oscillator panes that compress your price chart, this script calculates values in the background and displays them in a customizable, floating dashboard. Simultaneously, it allows for the plotting of up to 20 independent Moving Averages directly on the chart, featuring both classical and advanced adaptive algorithms.
Key Features
1. The Moving Average Engine (Chart Overlay)
This script includes a robust engine capable of rendering up to 20 simultaneous Moving Averages. Each slot is fully independent, allowing you to select the Type, Length, Source, and Color.
We have included a mix of Classical, Adaptive, and Geometric averages to suit any trading style:
Classical : SMA, EMA, WMA, RMA.
Adaptive:
KAMA (Kaufman Adaptive): Adjusts to market noise.
FRAMA (Fractal Adaptive): Uses fractal geometry to dynamically adjust the smoothing period based on price dimension changes.
JMA (Jurik Moving Average): A low-lag, low-noise smooth curve (custom implementation).
VIDYA (Variable Index Dynamic Average): Adjusts volatility using Chande Momentum Oscillator.
Low-Lag/Smooth:
Hull MA (HMA): Reduces lag while improving smoothing.
Zero-Lag EMA (ZLEMA): Removes lag by tracking the difference between price and a standard EMA.
Tilson T3: A smooth, low-lag moving average.
Super Smoother: Uses a 2-pole Butterworth filter for superior noise reduction.
Other Types:
ALMA (Arnaud Legoux), McGinley Dynamic, LSMA (Least Squares), Geometric MA, Triangular MA, and Median.
2. The Oscillator Dashboard (Data Table)
Rather than plotting lines, the script computes the raw values and signal components of popular oscillators and presents them in a clean table. This is ideal for "at-a-glance" confluence checking.
Supported Oscillators include:
Momentum : RSI, Stochastic, Stoch RSI, Williams %R, Momentum, CCI, Ultimate Oscillator.
Trend & Volume: MACD (displays Line, Signal, and Histogram values), ADX (with DI+ and DI-), Aroon (Up/Down), Vortex.
Market Strength : CMF (Chaikin Money Flow), MFI (Money Flow Index), ATR (Average True Range).
Advanced: Fisher Transform, TRIX, Connors RSI, CMO, and TSI.
How It Works
Calculations: All indicators are calculated using standard and advanced mathematical formulas derived from their original authors (e.g., John Ehlers for Fisher/Super Smoother, Jurik for JMA).
Display Logic: The script utilizes Pine Script's table library. It dynamically checks which indicators you have enabled in the settings. If an indicator is disabled, it is removed from the calculation pipeline to optimize script performance.
Adaptive Logic: For adaptive averages like FRAMA and KAMA, the script analyzes price volatility or fractal dimension over the user-defined lookback period to automatically tighten or loosen the smoothing factor.
How to Use
Trend Identification: Enable your preferred Moving Averages (e.g., a 50/200 EMA pair) to visualize the main trend direction on the chart.
Confluence Scanning: Use the Dashboard to check the state of oscillators without scrolling down. For example, you can quickly see if RSI is above 70 (Overbought) while simultaneously checking if the MACD Histogram is ticking down.
Customization: Open the settings to toggle specific MAs or Oscillators on/off. You can also change the position of the dashboard (e.g., Top Right, Bottom Left) to fit your screen setup.
Settings
Global MA Params: Controls specific variables for complex MAs (e.g., JMA Phase/Power, ALMA Offset/Sigma).
Moving Averages: 20 individual slots to toggle visibility, select type, and set length/color.
Oscillators: Individual toggles and length settings for every oscillator listed above.
Table Settings: Control the visibility and position of the data dashboard.
Disclaimer
This tool is for informational and educational purposes only. It provides technical data based on mathematical formulas and DOES NOT constitute financial advice. Past performance of any indicator does not guarantee future results. Always manage your risk.
EMA Slope Checker Pro CareCAn enhanced momentum analysis indicator that measures the rate of change of key EMAs (9, 20, 50) with a fully customizable data table. It provides real-time slope calculations, visual trend direction arrows, and a professional-grade information panel that can be positioned, resized, and color-customized to match any trading background or screen layout.
Perfect for momentum traders who need quick, at-a-glance EMA slope information with maximum visibility and customization options.
OTM Adaptive Kalman CloudOTM • Adaptive Kalman Cloud — User Guide
OTM • Adaptive Kalman Cloud is a trend + momentum visual tool built around two Adaptive Kalman filters (Fast & Slow). It prints a directional cloud that reacts quickly when the market shifts, but stays smooth enough to keep you out of chop.
What it shows
Fast Kalman = short-term direction / impulse
Slow Kalman = trend baseline / structure bias
Cloud = the “state” of the market (trend vs reversal vs chop)
How to read it
Bullish state
Cloud is bull color
Fast is above Slow (or Fast slope is rising if using slope mode)
Best trades: pullbacks into the cloud + continuation
Bearish state
Cloud is bear color
Fast is below Slow (or Fast slope is falling)
Best trades: pullbacks into the cloud + continuation
Transition / reversal
Cloud flips color after Fast/Slow relationship changes
Treat first flip as warning, confirmation comes from structure/liquidity (your SMC tool)
Settings that matter (don’t overcomplicate it)
1) Lengths
Fast (8–13): quicker signals, more noise
Slow (21–55): cleaner bias, fewer flips
Typical: 8 / 21 (fast scalps) or 13 / 34 (cleaner trend)
2) Color Mode
Fast>Slow: best for trend bias (simple + reliable)
Fast Slope: more responsive, can flip earlier in chop
3) Timeframe + Wait for Close
Set a higher TF (ex: 1H) to use it as bias
Turn on Wait for timeframe closes to stop HTF repaint-style flicker
4) Cloud Thickness
Thickness Mult is visual only (makes the cloud easier to see)
Doesn’t change the Kalman calculation—just visibility
5) Spread (Visual Helper)
Spread is visual only to separate lines when volatility is low
Use ATR spread for most markets
Best way to use it (simple rules)
Only trade in the cloud direction
Entries: wait for price to pull back into/near the cloud, then continue
Exits: when cloud flips against you OR momentum dies and structure breaks
Combine with your SMC: use the cloud as bias, SMC as entry trigger
Recommended presets
Gold / BTC (5m–15m)
Fast 8, Slow 21
Color mode: Fast>Slow
Thickness: 1.6–2.2
Spread: ATR, 14, amount 0.10–0.25 depending on volatility
Moving Averages 20, 50, 150, 200This indicator plots four commonly used Simple Moving Averages on the price chart: 20, 50, 150, and 200.
It is designed to help traders easily identify short-term, medium-term, and long-term trend direction, as well as key crossover events.
Features:
SMA 20 (purple) – short-term momentum
SMA 50 (greenish) – intermediate trend
SMA 150 (yellow) – long-term bias
SMA 200 (orange) – major trend direction
Visual crossover markers for:
SMA 20 / SMA 150
SMA 50 / SMA 200
The indicator uses Pine Script® v6 and is fully compatible with the latest TradingView platform.
All moving average lengths can be customized in the settings.
This script is intended for trend analysis and confirmation and can be used across all markets and timeframes.
TA Confluence Scanner v2.9 | Mint_Algo📘 TA Confluence Scanner
Introduction
The TA Confluence Scanner is a multi-factor trend system designed to filter market noise and identify high-probability trade setups. By combining adaptive algorithms (KAMA) with Price Action methodologies (SMC, Breakouts, Fractals), this indicator operates on the principle of Confluence : a signal is only valid when multiple independent tools agree on the direction.
Instead of relying on a single lagging indicator (like just MA fast and slow crossover), this script acts as a "Scanner," evaluating the market state through Volatility, Trend Structure, and Equilibrium.
───────────────────────────────────────────────────
Important Note
To make this "Plug & Play," I have included optimized presets in the settings for different timeframes (1m/15m-1h/4h-1D) and trading styles (Scalper, Intraday, Swing, Investor) tested on symbols:
FX:EURUSD
IG:NASDAQ
BITSTAMP:BTCUSD
BINANCE:ETHUSD
CAPITALCOM:US500
OANDA:XAUUSD
NASDAQ:AAPL
NASDAQ:TSLA
BUT default settings already include a good preset which excludes most of the noise and grabs the trend better (fewer entries, but quality is higher).
Check the presets at the bottom 👇
───────────────────────────────────────────────────
Core Features
Adaptive Trend Filter (KAMA): Adjusts to market volatility to distinguish between chop and true trends.
SMC Equilibrium (EQ) Fans: A three-tiered dynamic structure (Fast, Medium, Slow) for trailing stops and targets.
Confluence Counter: Visually displays the strength of a signal (e.g., "Strong 4/6") based on how many factors align.
Re-Entry Logic: Identifies low-risk entry points within an existing trend.
Automated S/R & Breakouts: Detects key pivot levels and structural breaks.
───────────────────────────────────────────────────
Settings & Components Breakdown
1. KAMA (Primary Trend Filter)
The backbone of the system. It calculates the Efficiency Ratio (ER) of price movement.
How it works: If the ER is high (strong trend), KAMA follows price closely. If ER is low (ranging), KAMA flattens out to prevent false signals.
Tuning:
Fast (ER ~100/5/60): For Scalping.
Smooth: Default settings are optimized for a balance between lag and noise reduction.
2. SMC Equilibrium (EQ Structure)
Based on the HL2 formula (High+Low / 2), this creates a "fan" of three lines:
EQ1 (Fast): The aggressive line. Used for early exits or scalping stops.
EQ2 (Medium): The baseline trend structure.
EQ3 (Slow): The major trend container. Used for position trading.
Usage: Use these lines to gauge how far price has deviated from its "fair value."
3. Breakout & Internal Trend
Lookback Period: Defines the range for a valid breakout. A lower lookback (e.g., 10) gives earlier signals but more noise; a higher lookback (e.g., 20-30) confirms significant structural breaks.
Internal Trend: A simplified SMA check to ensure immediate momentum aligns with the macro trend.
4. Signal Strength (The Confluence Meter)
The indicator counts active signals from: KAMA, Internal Trend, S/R, FVG, Breakout, and EQ.
Strong Signal: When the count hits your threshold (e.g., 4/6 ). This suggests a high-probability reversal or breakout.
Medium Signal (Triangles): These appear when the trend is active but not all filters align. These are excellent continuation/re-entry points.
───────────────────────────────────────────────────
How to Trade (Strategy Guide)
🎯 The Entry
Wait for a Strong Signal (Large Label). This confirms that volatility, structure, and momentum have aligned.
Conservative: Wait for the candle to close.
Aggressive: Enter on the breakout of the KAMA line.
🔄 Re-Entry & Continuation
Markets rarely move in a straight line.
Scenario: You missed the initial "Strong" entry, or you took profit and want to re-enter.
The Signal: Look for the small Triangles (Medium signals). These often appear after a pullback when price resumes the main trend.
Logic: If the main KAMA trend is still green/red, but the "Strong" signal isn't firing, a Triangle indicates a safe place to add to a position.
⚠️ Pyramiding & Risk Management (Advanced)
The EQ Lines (Fast/Medium/Slow) are designed for a tiered position management strategy:
Entry: Open position (e.g., 0.03 lots).
First Take Profit: When price extends far beyond EQ1 (Fast) , lock in partial profits.
Trailing Stop: Move your Stop Loss to trace the EQ2 (Medium) line.
Trend Riding: Hold the "Runner" portion of your position until price closes back under EQ3 (Slow) or the KAMA line.
Tip: Use William Fractals (Period 2) to pinpoint exact swing highs/lows for tightening stops.
───────────────────────────────────────────────────
Presets & Optimized Settings
To make this "Plug & Play," I have included optimized presets in the settings for different trading styles.
(If you don't see some parameters, that means they are turned off in trading mode)
⚡ SCALPER (1m - 5m)
KAMA:
ER: 100
Fast Length: 15
Slow Length: 30
FVG:
Size %: 0.01
Trend Detection:
Length: 20
Breakout:
Lookback Period: 10
S/R Detection:
Pivot Length: 10
Tolerance: 0.3
SMC EQ:
Default: 10
EQ1: 10
EQ2 (Main): 30
EQ3: 120
Signal Strength:
Strong: 4
Medium: 3
📊 INTRADAY (15m - 1H)
KAMA:
ER: 100
Fast Length: 5
Slow Length: 30
Trend Detection:
Length: 100
Breakout:
Lookback Period: 30
S/R Detection:
Pivot Length: 20
Tolerance: 0.5
SMC EQ:
Default: 10
EQ1: 10
EQ2 (Main): 40
EQ3: 80
Signal Strength:
Strong: 4
Medium: 3
📈 SWING (4H - 1D)
KAMA:
ER: 30
Fast Length: 4
Slow Length: 30
Trend Detection:
Length: 50
Breakout:
Lookback Period: 20
S/R Detection:
Pivot Length: 30
Tolerance: 0.7
SMC EQ:
Default: 10
EQ1: 10
EQ2: 50
EQ3 (Main): 60
Signal Strength:
Strong: 4
Medium: 3
💼 INVESTOR (4H - 1D+)
KAMA:
ER: 30
Fast Length: 5
Slow Length: 10
Trend Detection:
Length: 100
Breakout:
Lookback Period: 50
S/R Detection:
Pivot Length: 30
Tolerance: 0.7
SMC EQ:
Default: 10
EQ1: 10
EQ2: 50
EQ3 (Main): 100
Signal Strength:
Strong: 4
Medium: 3
───────────────────────────────────────────────────
Notes
FVG (Fair Value Gaps): Optional. Enable if you trade volatile assets like Crypto/Gold where imbalances are common.
Support/Resistance: The built-in Pivot system is optional. Disable it if you prefer drawing your own levels to keep the chart clean.
Recommended Pairing:
For best results, pair this with a momentum oscillator like RSI to detect the range regime of a trend. Or DI+ and DI- (when it crosses over each other, that means the "range of possible" regime change of a trend).
───────────────────────────────────────────────────
Disclaimer:
This tool is for informational purposes only. "Confluence" increases probability but does not guarantee results. Always manage your risk.
EMA Cross Pro v2.0
An indicator that generates trade signals based on EMA crosses and automatically displays multiple stop-loss/take-profit lines. Also includes a higher timeframe trend filter.
Main Features
【1. EMA Cross Signals】
Generates entry signals when Fast EMA (default 7) crosses Standard EMA (default 16).
・Golden cross → Long signal (green ▲ "L")
・Death cross → Short signal (red ▼ "S")
【2. Higher Timeframe Trend Filter】
Determines trend direction using a timeframe 4x larger than the current one, displayed in the top-right panel.
Example: 5-second chart references 20-second, 15-minute chart references 1-hour
【3. SL/TP Lines (4 lines)】
・SL1 (red): EMA cross price (average of both EMAs)
・SL2 (blue): Stop-loss at a set % away from SL1
・TP1 (orange): First take-profit target calculated by ATR × multiplier
・TP2 (purple): Trailing take-profit that follows price extremes
【4. Break-Even Function】
When price reaches TP1, SL1 automatically moves to entry price (BE).
Parameter Settings
【EMA Settings】
・Fast EMA: Short-term EMA period
・Standard EMA: Long-term EMA period
【Risk Management Settings】
・SL2 Offset: Offset % from SL1
・TP1 ATR Multiplier: TP1 = SL1 ± (ATR × this multiplier)
・TP2 Position Ratio: Position between SL1 and extreme price (%)
Information Panel Guide
The top-right table displays:
・HTF Trend: Higher timeframe trend direction (BULLISH/BEARISH)
・Position: Current position status
・SL2/SL1/TP1/TP2: Each price level
・High/Low: Highest/lowest price during position
・Diff from SL1: Difference from SL1 to current price (with P&L %)
Recommended Usage
1. Taking only signals aligned with the higher timeframe trend may improve win rate
2. Use SL2 as your actual stop-loss and TP1 as your minimum profit target
3. After TP1 is reached, SL moves to BE, then trail toward TP2
---------------------------------------------------------------------------------------------------------------------
EMAクロスを基にしたトレードシグナルと、複数のストップロス/利益確定ラインを自動表示するインジケーター。上位足トレンドフィルターも搭載してます。
主な機能
【1. EMAクロスシグナル】
Fast EMA（デフォルト7）とStandard EMA（デフォルト16）のクロスでエントリーシグナルを生成します。
・ゴールデンクロス → ロングシグナル（緑の▲「L」）
・デッドクロス → ショートシグナル（赤の▼「S」）
【2. 上位足トレンドフィルター】
現在の時間足の4倍の上位足でトレンド方向を判定し、右上パネルに表示されます。
例：5秒足なら20秒足、15分足なら1時間足を参照
【3. SL/TPライン（4本）】
・SL1（赤）: EMA交差価格（2つのEMAの平均値）
・SL2（青）: SL1から一定%離れたストップロス
・TP1（オレンジ）: ATR × 倍率で計算した最初の利確目標
・TP2（紫）: 極値に連動するトレーリング利確
【4. ブレークイーブン機能】
価格がTP1に到達すると、SL1が自動的にエントリー価格（BE）に移動します。
パラメータ設定
【EMA設定】
・Fast EMA: 短期EMA期間
・Standard EMA: 長期EMA期間
【リスク管理設定】
・SL2 Offset: SL1からのオフセット%
・TP1 ATR Multiplier: TP1 = SL1 ± (ATR × この倍率)
・TP2 Position Ratio: SL1と極値の間の位置（%）
情報パネルの見方
右上のテーブルに以下が表示されます：
・HTF Trend: 上位足のトレンド方向（BULLISH/BEARISH）
・Position: 現在のポジション状態
・SL2/SL1/TP1/TP2: 各価格レベル
・High/Low: ポジション中の最高/最低価格
・Diff from SL1: 現在価格とSL1の差（損益%表示付き）
推奨される使い方
1. 上位足トレンドと同方向のシグナルのみを採用すると勝率が上がる可能性があります
2. SL2を実際のストップロス、TP1を最低利益目標として活用
3. TP1到達後はBEに移動されるため、その後はTP2を目指してトレーリング
Combined Advanced Trading BlueprintCombined Advanced Trading Blueprint
This all-in-one institutional trading suite integrates market structure, volume analysis, and automated target projection. It is designed to find high-probability "Blueprints" by combining PVSRA (Price, Volume, Storage, Resistance, and Support) with dynamic Fibonacci and ATR-based risk management.
🚀 Key Modules
1. Institutional Inflection Zones (Supply & Demand)
Identifies where major market participants are entering.
Supply & Demand: Automatically draws zones at key swing highs and lows.
IZ (Inflection Zones): Real-time labels marking the median of these zones.
BOS (Break of Structure): When a zone is breached, it transforms into a BOS line to signal trend continuation or reversal.
2. PVSRA & Vector Zones
The core of institutional volume analysis.
Climax Volume (Red/Green): Bars with volume >= 200% of average. These mark exhaustion or massive entry.
High Volume (Violet/Blue): Bars with volume >= 150% of average.
Automated Zones: The script draws boxes around these high-volume candles. Price returning to these zones often sees a sharp reaction.
3. Trader Daddy Intelligence
An automated layer for objective target setting.
Auto-Fibonacci: Dynamically calculates the current swing range and plots 0.236, 0.382, 0.5, 0.618 (Golden), 0.786, and extensions.
Volume Gaps (FVG): Detects Fair Value Gaps (FVGs) where price moved too fast. These acts as "magnets" that the market usually returns to fill.
ATR Targets: Dynamic Take Profit (TP1, TP2, TP3) and Stop Loss (SL) lines that adjust based on current market volatility.
4. Confluence Ribbon System
A multi-layered moving average and channel system.
The Ribbon: Uses 8 EMA (Red), 21 EMA (White), 34 EMA (Blue), 50 SMA (Orange), and 200 SMA (Dark Orange).
Keltner Channels: Three standard deviation bands to identify overbought/oversold conditions.
RSI Triggers: A fast 2-period RSI detects "stretches" outside the Keltner bands for precise entry timing.
VWAP: Includes anchored VWAP for Session, Weekly, and Monthly trends.
🎨 Visual Guide & Color Legend
Price Targets (Trader Daddy)
Green Dashed Lines: Take Profit levels (TP1, TP2, TP3).
Red Solid Line: ATR-based Stop Loss.
Cyan/Blue Labels: Fibonacci retracement levels. The Blue level often acts as a major institutional target or "Take Profit" area in a trending market.
Market Zones
Cyan Boxes: Active Demand (Buy) zones.
Grey/White Boxes: Active Supply (Sell) zones.
Purple/Fuchsia Areas: Vector Zones (High institutional volume).
🛠 How to Trade the Blueprint
Locate the Zone: Wait for price to enter a Supply/Demand box or a Purple Vector Zone.
Check the Market State: Look at the top-right info label to see if the trend is Bullish, Bearish, or Neutral.
Wait for Confluence: Look for an 8/21 EMA crossover or an RSI "Circle" trigger near the Keltner bands.
Execute: Use the ATR-generated TP and SL lines to manage your risk automatically.
TheStockmarketStory ULTIMATEEMA/MA PIVOT POINTS all in one with supertrend and vwap with color customisations
TheStockmarketStory ULTIMATEEMA/MA PIVOT POINTS all in one with supertrend and vwap with color customisations
AlKa mAMoving Averages
Slope of Moving Averages as Strength Factor
Always In as Strength Factor
Band of Mean with buy and sell zones, lines or highlight.
Moving Averages Lens - Algoat_Alpha// ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
// █ Algoat_Alpha || TREND SYSTEM v2.0 █
// ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
█ INTRODUCTION
Welcome to the Algoat_Alpha MA Lens.
Moving Averages are the backbone of technical analysis, but a cluttered chart with random lines is useless. We built the MA Lens to strip away the noise and tell you exactly who is controlling the market.
This is not just a set of lines; it is an educational overlay that helps you understand market psychology at a glance—from high-frequency scalpers to long-term institutional investors.
█ WHAT DOES IT DO?
The MA Lens projects 6 key institutional moving averages onto your chart with zero configuration required. It color-codes the market structure, provides Smart Tooltips for education, and includes a built-in Alert System so you never miss a move.
█ KEY FEATURES
1. 🧠 Smart Tooltips (Interactive Learning) Hover over any label to see exactly what that Moving Average represents.
Example: Hover over the MA 10 to see "The Scalper's Pulse" – identifying high-frequency liquidity zones.
Understand why price is reacting at specific levels, rather than just guessing.
2. 🔔 Integrated Alert System Stop staring at the screen. We have included robust alert functionality directly in the script.
Crossover Alerts: Get notified instantly when price crosses key institutional levels (like the 200 MA).
Momentum Shifts: Set alerts for when short-term trends (MA 10/20) realign, allowing you to catch the breakout early.
3. 🎯 The "Lens" View (6-Layer Analysis) We automatically plot the most respected levels in trading:
MA 10 & 20: Short-term momentum (Scalpers & Day Traders).
MA 50: The "Swing Trader's Line."
MA 100, 150, 200: Major institutional support/resistance zones.
█ HOW TO USE
Add to Chart: Apply the script to any timeframe.
Read the Trend:
If price is above the Yellow/Red lines (MA 150/200), the long-term trend is Bullish.
If price is holding the Blue/Green lines (MA 10/20), momentum is strong.
Set Alerts:
Click the "Alert" button in TradingView, select this indicator, and choose your preferred condition (e.g., "Price Crossing MA 200") to get notified on your phone or desktop.
█ BOOST & SHARE
OzCobbs MACD-CCI with DivergenceOzCobbs MACD-CCI with Divergence combines the most useful behaviour of MACD and CCI into a single adaptive indicator, designed to highlight true momentum extremes rather than fixed, arbitrary levels.
This tool is built for traders looking for a Goldilocks solution, not too simple, not over-engineered, just enough structure to reveal when market behaviour becomes abnormal.
Instead of static overbought or oversold zones, both MACD and CCI use statistically derived outlier bands that automatically adjust to the instrument, timeframe, and volatility regime. This makes extremes meaningful, comparable, and consistent across markets.
The indicator can be used in two ways:
Merged mode, where MACD and CCI are overlaid into one cohesive view of momentum and stretch.
Split mode, by adding the indicator twice, setting one instance to MACD and the other to CCI, allowing focused analysis of each component.
Optional CCI divergence detection is also included to help identify momentum exhaustion at statistically significant extremes, without clutter or hidden divergence noise.
The default settings are great, but it is fully customisable and adaptable to suit individual trading styles - simply tweak, turn on/off whatever you feel is needed to improve YOU.
Enjoy
EMA base Market Trend Analysis I this script you will get info about the trends in multiple time frames to make a view about the market. I am mainly using the EMA for this 8 and 33 EMA. This script is a extra assistant to make your perspective about the market. Do your own research before adding to your arsenal.
Gold scalper 1 min or 30 sec V2Gold Scalper V2 is a precision scalping tool designed for XAUUSD, combining classic trend-following with a unique "Hybrid Tick-Flow" capability.
🔥 Core Features:
Golden Ratio Ribbon: A sequence of Fibonacci EMAs (5 to 144) to visually identify strong trends and dynamic support/resistance zones.
Stoch RSI Trigger: Precise entry timing using Stoch RSI crossovers specifically in Overbought/Oversold zones.
Multi-Timeframe Breakout Filter: Filters out bad signals by ensuring price is breaking new highs or lows on a higher timeframe.
💡 The "Secret Weapon": Tick Chart Alarms on 1-Sec Chart This script solves a major limitation on TradingView regarding alerts on Tick Charts.
The Setup: Open your chart on the 1-second (1s) timeframe.
The Hack: In the indicator settings, set the "Filter Timeframe" to "1000T" (or any Tick value).
The Advantage: The script pulls structure data (High/Low) from the 1000 Tick chart (Volume-based structure) but runs the logic on the 1-second chart (Time-based).
Result: You get the precision of Tick Chart analysis WITH functional Server-Side Alerts provided by the 1-second timeframe.
🛠 Strategy Logic:
🟢 LONG (Buy): Trend Ribbon is Green + Stoch RSI Crossup (<20) + Price breaks above the previous Filter High (e.g., 1000T High).
🔴 SHORT (Sell): Trend Ribbon is Red + Stoch RSI Crossdown (>80) + Price breaks below the previous Filter Low (e.g., 1000T Low).
Warning: This script is designed for high-frequency scalping. Please manage your risk properly. Credit: Boss Edit / Code optimized for real-time calculation.
trend system configuration [skyeye]System Overview The Structural Trend & Fibo Nexus is a comprehensive trading system designed to bridge the gap between discretionary technical analysis and quantitative risk management. It integrates Market Structure identification, Multi-Timeframe (MTF) Momentum, and automated Risk/Reward calculation into a single chart interface.
Core Features & Calculation Logic
1. Market Structure Identification (The Backbone)
Algorithm: Utilizes a filtered ZigZag algorithm. Unlike standard ZigZags, this script incorporates a Min Swing % filter and a Min Bars duration filter.
Logic: It identifies valid Higher Highs (HH) and Lower Lows (LL) only when price moves exceed a specific volatility threshold. This effectively filters out market noise.
Visuals:
Green Background: Indicates a Bullish Structure phase.
Red Background: Indicates a Bearish Structure phase.
2. Zero-Lag Momentum Layer (The Trigger)
Algorithm: A Two-Pole Gaussian Filter.
Logic: Gaussian filters offer superior smoothness compared to Simple or Exponential Moving Averages (SMA/EMA) while significantly reducing lag. This allows for faster reaction to trend reversals without the "whipsaw" effect of noisy moving averages.
MTF Dashboard: The table in the bottom-right corner monitors the Gaussian momentum across 5 timeframes (5m to 4h) in real-time, helping traders align with the dominant trend.
3. Quantitative Risk Engine (The Execution)
Auto-Calculation: When a valid trend reversal signal occurs (Structure Flip + Momentum Cross), the script automatically projects a trade setup.
Dynamic Stop Loss (SL): Calculated using the Average True Range (ATR). This ensures the stop loss adapts to the current market volatility (wider stops in volatile markets, tighter stops in calm markets).
Take Profit (TP) Targets: Automatically projects three fixed Reward-to-Risk (R:R) targets:
TP1: 1:1 R:R
TP2: 1:1.5 R:R
TP3: 1:2 R:R
Visuals: Draws colored boxes and dashed lines on the chart to visualize the potential PnL zones immediately upon signal generation.
Strategy Guide: The "Quant Nexus" Method
Step 1: Structural Bias Observe the background color.
Trade Long only when the background is Green.
Trade Short only when the background is Red.
Step 2: Trend Alignment Check the MTF Dashboard. Ideally, the H1 and H4 timeframes should match the color of your intended trade direction (Green for Long, Purple for Short).
Step 3: Signal Execution Wait for the entry signal (indicated by the Risk/Reward boxes appearing).
Entry: At the close of the signal candle.
Stop Loss: Place your SL at the level indicated by the "Stop Loss" label (based on ATR).
Take Profit: Scale out positions at TP1, TP2, and TP3 levels.
Settings Customization
ZigZag Config: Adjust Depth and Min Swing % to tune the sensitivity of market structure.
MTF Trends: Customize the Alpha to adjust the smoothness of the Gaussian line.
Quant Risk: Toggle Use ATR SL or adjust SL Multiplier to fit your risk appetite.
Disclaimer: This tool is for educational purposes only. Automated signals should always be verified with your own analysis.
(Chinese Translation / 中文說明)
系統概述 Structural Trend & Fibo Nexus 是一套綜合交易系統，旨在縮小主觀技術分析與量化風險管理之間的差距。它將市場結構識別、多週期 (MTF) 動能和自動風險/回報計算整合到單一圖表介面中。
核心功能與計算邏輯
1. 市場結構識別 (骨幹)
演算法： 使用經過過濾的 ZigZag 演算法。與標準 ZigZag 不同，本腳本結合了「最小波動百分比」和「最小 K 線數」過濾器。
邏輯： 僅當價格變動超過特定的波動率閾值時，才會識別有效的更高高點 (HH) 和更低低點 (LL)。這有效地過濾了市場雜訊。
視覺效果：
綠色背景： 表示看漲結構階段。
紅色背景： 表示看跌結構階段。
2. 零延遲動能層 (觸發器)
演算法： 雙極高斯濾波器 (Two-Pole Gaussian Filter)。
邏輯： 與簡單或指數移動平均線 (SMA/EMA) 相比，高斯濾波器提供了卓越的平滑度，同時顯著減少了延遲。這允許對趨勢反轉做出更快的反應，而不會產生嘈雜均線的「假突破」效應。
MTF 儀表板： 右下角的表格即時監控 5 個時間週期 (5m 至 4h) 的高斯動能，幫助交易者與主趨勢保持一致。
3. 量化風控引擎 (執行)
自動計算： 當有效的趨勢反轉信號出現（結構翻轉 + 動能交叉）時，腳本會自動投射交易計畫。
動態止損 (SL)： 使用 平均真實波幅 (ATR) 計算。這確保止損能適應當前的市場波動（波動大時止損較寬，平靜時止損較窄）。
止盈 (TP) 目標： 自動投射三個固定的風險回報比 (R:R) 目標：
TP1: 1:1 盈虧比
TP2: 1:1.5 盈虧比
TP3: 1:2 盈虧比
視覺效果： 在信號產生時，立即在圖表上繪製彩色方框和虛線，以視覺化潛在的盈虧區域。
策略指南：量化共振法
第一步：結構偏差 觀察背景顏色。
背景為 綠色 時，僅考慮做多。
背景為 紅色 時，僅考慮做空。
第二步：趨勢對齊 檢查 MTF 儀表板。理想情況下，H1 和 H4 時間週期應與您的預期交易方向顏色相符（做多為綠色，做空為紫色）。
第三步：信號執行 等待進場信號（由出現的風險/回報框指示）。
進場： 在信號 K 線收盤時。
止損： 將止損設置在「Stop Loss」標籤指示的位置（基於 ATR）。
止盈： 在 TP1、TP2 和 TP3 水平分批獲利了結。
設定自定義
ZigZag 設置： 調整 Depth 和 Min Swing % 以微調市場結構的靈敏度。
MTF 趨勢： 自定義 Alpha 以調整高斯線的平滑度。
量化風控： 切換 Use ATR SL 或調整 SL Multiplier 以符合您的風險偏好。
免責聲明：本工具僅供教育用途。自動信號應始終通過您自己的分析進行驗證。
Golden Ratio Fibo Ribbon# Golden Ratio Fibo Ribbon
**Concept & Overview**
The "Golden Ratio Fibo Ribbon" is a comprehensive trend-following system designed to help traders identify the primary trend direction and find high-probability entry points during pullbacks. This script combines the power of Fibonacci Moving Averages (The Golden Ratio sequence) to visualize trend strength with the Stochastic RSI to pinpoint precise entry timing.
The core philosophy of this indicator is: **"Trade with the trend, enter on the pullback."**
---
### 🛠️ How it Works (Logic & Calculation)
**1. The Fibo Ribbon (Trend Filter)**
The trend is determined by a sequence of Moving Averages based on Fibonacci numbers: 5, 8, 13, 21, 34, 55, 89, and 144.
* **The Baseline:** The 144-period MA acts as the major trend filter.
* **The Ribbon:** Shorter-term MAs (5 to 89) create a "Ribbon."
* **Trend Definition:**
* **Uptrend (Bullish):** All shorter-term MAs are *above* the 144 MA Baseline. The ribbon is filled with **Green**.
* **Downtrend (Bearish):** All shorter-term MAs are *below* the 144 MA Baseline. The ribbon is filled with **Red**.
**2. Signal Generation (Stochastic RSI)**
Instead of taking every crossover, this script filters signals based on the trend direction established by the Ribbon.
* **Buy Signal (Long):**
* Condition 1: The Ribbon must be fully **Bullish** (Green).
* Condition 2: Stochastic RSI (K line) crosses *above* the D line.
* Condition 3: The crossover must happen in the **Oversold zone** (default < 20).
* **Sell Signal (Short):**
* Condition 1: The Ribbon must be fully **Bearish** (Red).
* Condition 2: Stochastic RSI (K line) crosses *below* the D line.
* Condition 3: The crossover must happen in the **Overbought zone** (default > 80).
---
### 🎯 How to Use
1. **Identify the Trend:** Look at the background color and the ribbon. Green indicates a strong uptrend, Red indicates a strong downtrend.
2. **Wait for Pullbacks:** Do not chase the price. Wait for the price to pull back towards the ribbon.
3. **Execute on Signals:** Look for the "BUY" or "SELL" labels. These appear when the momentum (Stoch RSI) turns back in favor of the main trend.
* *Example:* In a Green Ribbon trend, wait for the price to drop (Stoch RSI goes oversold), then buy when the "BUY" label appears.
### ⚙️ Settings
* **Ribbon Source:** Choose between EMA (Exponential) or SMA (Simple) moving averages.
* **Stoch RSI Settings:** Adjustable K, D, RSI Length, and Stochastic Length to fit different timeframes.
* **Overbought/Oversold Levels:** Customize the trigger zones (default 80/20).
### ⚠️ Disclaimer
This indicator is a technical analysis tool and does not guarantee profits. Past performance is not indicative of future results. Always use proper risk management and combine this tool with your own price action analysis.
Stage Analysis & Minervini Trend AnalysisStage Analysis & Minervini
This Pine Script indicator is a comprehensive technical analysis suite designed for traders following Mark Minervini's Trend Template and Stan Weinstein’s Stage Analysis. It automates the heavy lifting of checking moving average alignments, volume characteristics, and 52-week price relative strength.
### Key Features ###
Minervini Trend Template Validation: Automatically checks if price and moving averages (50, 150, 200 SMA) meet the "Trend Template" criteria.
Adaptive Moving Averages: Includes 10, 20, 50, 150, and 200 SMAs. You can "lock" these to the Daily timeframe so they remain consistent even when you switch to lower timeframes.
Smart Volume Analysis:
Highlights bars based on volume intensity and price close (Top vs. Bottom Quartile).
Calculates a Weekly Volume Ratio to identify institutional accumulation or distribution.
Volatility Profiling: Categorizes stocks into four risk buckets (Ultra-Steady to High Volatility) based on ATR-to-SMA ratios.
Automated Stop Loss (SL) & Swing Markers:
Displays a dynamic 2x ATR Stop Loss line.
Identifies Swing Highs (SH) and Swing Lows (SL) with vertical markers.
Calculates suggested stop levels based on major moving averages at the most recent pivot low.
### The Dashboard ###
The top-right (default) table provides a real-time health check of the asset:
Metric: Description
MA Statistics: Current values for 10, 20, 50, 150, and 200 SMAs.
MA Alignment: A green arrow appears if Price > 50 > 150 > 200 SMA.
52W High/Low Ratios: Validates if the price is within 25% of its 52-week high and at least 30% above its 52-week low.
SMA Trends: Status (Up/Down/Flat) for the 50, 150, and 200 SMAs based on a 30-day slope.
ADR & ATR: Shows Average Daily Range and Average True Range over 20 periods.
### Visual Guide ###
Bar Coloring Logic
When Highlight Volume is enabled, bars change color during high-volume events:
Green : Price closed in the top 25% of its daily range (Strong Demand).
Yellow : Price closed in the bottom 25% or lower than the previous close (Distribution).
Black : High volume but price closed in the middle of the range (Indecision).
Swing Markers
The script automatically identifies pivot points:
Yellow "SL" Label: Recent Swing Low with a vertical dotted line and projected SMA support levels.
Blue "SH" Label: Recent Swing High.
### Inputs & Settings ###
Lock SMAs to Daily: Keep this checked to ensure your 200-day SMA doesn't turn into a 200-period SMA when switching to an hourly chart.
ATR Multiplier: Adjust the volatility stop loss (default is 2.0).
Pivot Strength: Change the left/right bar count required to confirm a Swing High or Low.
Table Position: Move the dashboard to any corner of your chart to avoid overlapping with other indicators.
### Usage Tips ###
Stage 2 Selection: Look for the "MA Alignment" arrow to be green. This indicates the stock is in a confirmed uptrend.
Volume Clues: Watch for green-highlighted bars on high volume—this often signals the start of a "Power Play" or institutional entry.
Weekly View: On the Weekly timeframe, the script plots a volume ratio label. A ratio > 2.0 with a green triangle indicates massive accumulation.
Disclaimer: This script is for educational and informational purposes only. Trading involves significant risk. Always perform your own due diligence.
