Dynamic Symmetry Levels [TeamCash]Dynamic Symmetry Levels
The Dynamic Symmetry Levels (DSL) indicator plots key price levels to guide your trading decisions. It uses the daily opening price as a reference, drawing a purple dashed line, and calculates symmetrical support and resistance levels above and below it, shown as white lines with price labels.
How It Works: DSL identifies potential reversal zones where price may react. If the price stays above the daily open, it leans bullish, targeting upper levels; if below, it leans bearish, aiming for lower levels. Levels reset daily for fresh analysis.
Why Use DSL?
Pinpoints high-probability reversal zones for entries and exits.
Enhances any strategy by aligning with your key areas of interest.
Offers clear, labeled visuals for quick and confident trading decisions.
Ideal for traders seeking a simple, effective tool to complement their technical analysis.
OKX:BTCUSD BITSTAMP:ETHUSD
รูปแบบชาร์ต
Universal Trade Levels & Signal Classifierscript has been enhanced and generalized for all instruments — not just ES or SPX.
You now get the following classifications:
💎 Perfect Trade – trend confirmed, strong signal, ATR + VWAP + volume aligned
🚀 Sure Shot Trade – very high volume + ATR breakout + directional bias
⚡ Quick Call/Put – fast actionable setups
❌ No Trade – avoid/no confirmation
The logic works across any timeframe and any ticker.
You can now test this live on any instrument in TradingView. Let me know if you’d like to add things like:
Multi-timeframe confirmation
Re-entry logic
Heatmap table of confidence levels
Signal filtering based on RSI, OBV, etc.
F2D Highlighter + FTFC + Volume Spike + Dashboard🧪 Why F2D Works
It traps short sellers who expect a breakdown
When it reclaims prior ranges, buyers flood back in
Paired with timeframe continuity (green on higher timeframes), it increases the edge
💸 F2D in Options Trading
Ideal for Calls when:
You're near a key level (VWAP, support, inside week/day)
Volume surges on reclaim
You catch a 2D that flips into a 2U (strong reversal)
🔧 Strike selection: ATM or 1–2 strikes OTM
⏰ Expiration: Same day or next day (if late in the day)
💥 Targets: 30–50% profit, then trail or scale out
CRT + PO3 Range Theory Hey everyone, I’ve put together a little script for TradingView that tries to show the classic CRT + PO3 (Power of Three) pattern. It’s still a work in progress, so please use it on a demo account and let me know what you think!
What It Does
Accumulation Phase: On each higher‐timeframe bar (e.g. 2-hour), it draws a shaded zone where price is hanging out. That’s when we assume “big players” are quietly building positions.
Manipulation Phase: If price briefly pokes above or below that zone but then slips back inside, it marks that wick as a shake-out.
Distribution Phase: When price finally closes cleanly outside the zone, it draws another shaded area and drops a “Distribution” label plus a big LONG or SHORT arrow on that bar.
You can tweak it so it only shows signals when a bar closes (no more weird flashing mid-bar), or even allow “direct” Distribution on a clean breakout without waiting for a fake wick first.
How to Set It Up
Add the script from your Indicators list.
Pick your HTF (I like 2-hour or 4-hour).
Turn “Show Zone Labels” on or off—these are the little “Accumulation/Manipulation/Distribution” tags.
Turn “Show Entry Signals” on to get the big LONG/SHORT arrows.
If you hate flicker, check “Show signals only at bar close.”
If you want to catch a swift breakout (no fake-out needed), check “Allow direct Distribution on clean breakout.”
There are also sliders for zone colors, transparency, label size, and how far above/below the bars the labels sit.
Why It’s Still a Beta
I’m not a CRT/PO3 guru—this is more of a hobby project and a little facination for this strategy.
There might be edge cases where it misses a shake-out or flags a Distribution too early.
I take no responsibility for your trades—please only run it on a demo account until we’ve worked out the quirks.
Feedback Wanted!
If you try it out, I’d love to hear:
Did the Manipulation wicks line up where you expected?
Were the Distribution arrows on the right bars?
Any ideas for easier settings or extra alerts?
Thanks for testing and helping me turn this into something solid!
20/40/6020/40/60 candle separator. Three lines only on all timeframes. Range length and height included. Doesn't mess up the scaling. Togglable elements and movable lines.
DCA by Vuong Thai v2 %verview of "DCA by Vuong Thai %" – Upgraded Version
Main Function:
This script automatically detects optimal DCA (Dollar-Cost Averaging) buy points and smart profit-taking zones based on a combination of technical signals: EMA, candlestick patterns, volume, RSI, and price distance from EMA.
It helps you optimize capital allocation using a structured averaging-down strategy and exit trades when a target price range is reached.
✅ Buy Logic (Buy Signal)
A buy signal is triggered when all of the following conditions are met:
Strong bullish candlestick: Green candle with a longer lower wick than upper wick
Price is below the EMA → indicating a downtrend
Volume is above the moving average (if volume filtering is enabled)
Price is at least a certain percentage below the EMA (e.g., ≥ 1%)
RSI is below 30 → indicating an oversold condition
No repeat buys unless price makes a new low → helps avoid premature entries
👉 When a buy signal appears:
A DCA Zone (buy region) is drawn on the chart
A label with the corresponding DCA percentage is displayed automatically (e.g., "DCA 5%", "DCA 10%")
Universal 10 MA be @cryptoingenerUniversal Multi MA (10 Moving Averages, Dynamic Colors, Multi-TF, By @CryptoIngener
Short Description (Краткое описание):
Indicator for plotting up to 10 moving averages of any type (SMA, EMA, WMA, HMA, RMA, DEMA, KAMA) on any timeframe, with dynamic coloring and customizable line thickness. Includes a subtle green watermark for copyright.
“This script is provided for educational and informational purposes only.”
Silver Bull Flag Breakout AlertDescription:
This script detects a bullish breakout in Silver (XAGUSD) above $37.60, confirming a bull flag continuation pattern on the daily chart. It optionally plots a 21 EMA as a trailing stop and includes a customizable alert condition for trade execution or monitoring.
Features:
• Alerts on daily close above $37.60
• Optional trailing stop (21 EMA)
• Visual breakout marker
• Ideal for swing trades targeting $41–$45
RNDMandar_RND This indicator give buy sell signal. Mandar_RND This indicator give buy sell signal Mandar_RND This indicator give buy sell signal Mandar_RND This indicator give buy sell signal Mandar_RND This indicator give buy sell signal Mandar_RND This indicator give buy sell signal Mandar_RND This indicator give buy sell signal Mandar_RND This indicator give buy sell signal Mandar_RND This indicator give buy sell signal Mandar_RND This indicator give buy sell signal Mandar_RND This indicator give buy sell signal
Fibonacci Optimal Entry Zone [OTE] (Zeiierman)Bitcoin is breaking out of the symmetrical triangle and showing major signs of strength, so we can expect to hit a new all-time high in the short term! Bitcoin was struggling in the past weeks compared to the stock market, but this should end!
Why do I think that the alt season is starting? To answer this question, we need to look at the BTC.D (Bitcoin dominance chart). if BTC.D goes up, that means money is flowing out of altcoins to Bitcoin, and when BTC.D goes down, that means money is flowing from Bitcoin to altcoins. And we want BTC.D to go up! So what is the chart telling us?
Candle Range Theory (CRT) indicator📌 Indicator Name: Candle Range Theory (CRT) indicator
This indicator detects potential bullish and bearish reversal setups based on specific candlestick price action behavior. It is designed to highlight moments when the market may be rejecting extremes and preparing to reverse direction — but only after confirmation with the closing price.
🔍 How It Works:
Bullish Setup (Long Signal):
The previous candle is bearish (closes lower than it opens).
The current candle makes a lower low than the previous one.
The current candle closes above the previous candle’s close.
Bearish Setup (Short Signal):
The previous candle is bullish (closes higher than it opens).
The current candle makes a higher high than the previous one.
The current candle closes below the previous candle’s close.
Signals are only triggered after the bar is fully closed, to avoid premature entries.
🔔 The script includes alert conditions for both long and short setups so you can receive notifications instantly.
🎥 Inspiration:
The idea for this indicator came from the excellent educational content presented in this video:
"How to Read Candlesticks Like a Pro"
We highly recommend watching it to better understand the price action principles behind this signal.
CPR with MAs, Super Trend & VWAP by Manoj Kumar Patidar JiIt's a best way to trading to one simple indicator
HTF Candle Extremes Zigzag (Drawn on LTF)HTF Candle Extremes Zigzag (Drawn on LTF)
This indicator plots zigzag lines connecting the extremes (highs and lows) of Higher Timeframe (HTF) candles directly on your lower timeframe (LTF) chart. It visually highlights trend changes and HTF candle structure by drawing colored lines representing uptrends and downtrends based on HTF candle extremes.
"Key Features"
Higher Timeframe Tracking: Select any HTF to track candle extremes using the built-in security function.
Zigzag Lines: Connects HTF candle lows to highs in an intuitive zigzag pattern.
Trend Indication: Uptrend lines are green, downtrend lines are red (customizable colors).
Customizable Line Width: Adjust the thickness of the zigzag lines for better visibility.
Drawn on Lower Timeframe: All lines appear on your active lower timeframe chart, allowing easy visual correlation.
"How It Works"
The script fetches the open, high, low, close, and time data of the specified HTF candle. It detects new HTF bars and identifies trend direction changes by comparing the highs and lows of consecutive HTF candles.
- When an uptrend is detected, vertical lines are drawn from low to high of the HTF candle, connected to the previous extreme low.
- When a downtrend is detected, vertical lines are drawn from high to low, connected to the previous extreme high.
- Transitions between trends are highlighted by connecting the last extreme of the previous trend to the current extreme, creating a clean zigzag pattern.
Usage Notes:
Ideal for traders who want to visualize HTF market structure and trend changes while analyzing price action on lower timeframes.
---
© The_Forex_Steward
(mozilla.org)
Fair Value Gap & Liquidity Zones [Combined]mixed FVG and buyside and sellside liquidity
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
DP_ORB Entry & Exit IndicatorDisclaimer:
This indicator is for educational purposes only. It does not constitute financial advice. Always do your own research and manage your risk. Also, I cannot take full credit for 'ORB' as its a well known strategy amongst many traders, but I do need to give a special shout out to @TheBigDaddyMax for putting me on to this.
DP_ORB Entry & Exit Indicator
Description:
The DP_ORB Entry & Exit Indicator is a powerful tool designed for traders who utilize the Opening Range Breakout (ORB) strategy on the NYSE session. This indicator visually identifies the initial volatility window of the trading day, by marking the 15m High, and 15m Low into a ORB Box, & then tracks breakout opportunities, and provides clear, dynamic trade management levels—all directly on your chart.
Key Features:
Automatic Opening Range (ORB) Box:
Identifies and plots the high and low of the user-defined opening range (default 9:30–9:45 NYSE) for visual reference and strategy foundation.
Breakout Entry Signals:
Automatically detects and marks long or short breakout entries when price closes above or below the ORB range, with additional momentum confirmation.
Dynamic Stop Loss:
Stop loss is intelligently set to the previous bar’s low for long trades (or high for shorts), adapting to market structure at entry.
Take Profit Targets:
Up to three fully adjustable take-profit levels are plotted, calculated as percentages from entry, supporting progressive trade management.
Visual Trade Management:
Entry, stop loss, and take profit levels are displayed as extending dashed lines from entry point to the current bar, with labels always shown just to the right of price for clarity on all timeframes.
Automatic Reset and Cleanup:
Visuals and logic reset daily and upon exit, ensuring a clean, uncluttered chart experience.
How to Use:
Set your preferred opening range time and take profit levels in the settings.
Wait for a breakout and confirmation during the NYSE session.
Use the on-chart lines and labels to manage your trade according to your risk and strategy plan.
Best For:
Day traders and scalpers seeking a disciplined, visual, and fully-automated approach to opening range breakout trading.
Renko Alerts📢 Renko Alerts – by Marcelo Ulisses Sobreiro Ribeiro
🧱 Detection of Bricks and Hammers on Renko Charts with Alerts
This indicator was designed for traders who use Renko charts and want to receive automated alerts when bricks and hammer-like patterns are formed, helping with price action reading and quick, objective decision-making.
✅ Indicator Function
Renko Alerts automatically identifies:
Bullish Brick: A clean bullish brick (no wicks), indicating potential trend continuation to the upside.
Bearish Brick: A clean bearish brick (no wicks), indicating potential trend continuation to the downside.
Bullish Hammer: A bullish brick with a lower wick.
Bearish Hammer: A bearish brick with an upper wick.
ℹ️ Important:
Hammer patterns are widely used as entry triggers, both for reversal and trend continuation — it all depends on the market context in which they appear (e.g., support/resistance, pullback zones, indicator confluence).
⚙️ Inputs & Settings
🔹 Box Size (points)
Description: Defines the Renko brick size in points.
Default value: 3.0
Why it matters: This setting is essential for the script to accurately detect brick formations. It calculates the body size and distinguishes between clean bricks and those with wicks (hammers).
Technical Note: A small tolerance is applied automatically to prevent floating-point comparison errors.
🔔 Available Alerts
The indicator provides four ready-to-use alert conditions for use within TradingView:
Alert Name Technical Condition Message
Bullish Brick Bullish brick with body equal to Box Size New Bullish Brick
Bearish Brick Bearish brick with body equal to Box Size New Bearish Brick
Bullish Hammer Bullish brick with a lower wick New Bullish Hammer
Bearish Hammer Bearish brick with an upper wick New Bearish Hammer
These alerts are ideal for automating chart monitoring and receiving real-time notifications about potential trade setups.
📌 Additional Notes
This script is designed to work exclusively with Renko charts using fixed box sizes.
It is not suitable for time-based candlestick charts.
You can use this indicator alongside other tools (moving averages, RSI, stochastics, etc.) to build confluent strategies.
First FVG📘 Indicator Description (English)
First FVG – NY Open is a TradingView indicator designed to automatically identify the first Fair Value Gap (FVG) that appears during the New York session, following the ICT (Inner Circle Trader) methodology.
It highlights institutional inefficiencies in price caused by imbalanced price action and helps traders spot high-probability entry zones, especially after the 9:30 AM EST (New York Open).
⚙️ How It Works
Session time: The indicator scans for FVGs starting at 9:32 AM (allowing 3 candles after the NY Open to form).
FVG Conditions:
Bullish FVG: When the high of 2 candles ago is lower than the low of the current candle and the middle candle is bullish.
Bearish FVG: When the low of 2 candles ago is higher than the high of the current candle and the middle candle is bearish.
Only the first FVG per session is drawn, as taught by ICT for setups like Judas Swing or NY Reversal models.
A colored box is drawn to represent the FVG zone.
A dotted horizontal line (CE) is drawn at the midpoint of the FVG box (Consequent Encroachment), a key level watched by smart money traders.
A dashed vertical line is drawn at 9:30 NY time to mark the open.
🧠 How to Use It
Wait for the NY Open (9:30 AM EST) – the indicator becomes active at 9:32 AM.
Watch for the first FVG box of the day. This is often a high-probability reaction zone.
Use the CE line (center of the FVG) as a reference for entries, rejections, or liquidity grabs.
Combine with market structure, PD Arrays, and liquidity concepts as taught by ICT for confluence.
The FVG box and CE line will extend forward for several candles for visual clarity.
🎛️ Customizable Settings
Session time (default: 09:32–16:00 NY)
FVG box color (up/down)
Text color
Max number of days to keep boxes on chart
Option to show or hide the 9:30 NY Open vertical line
Supply/Demand Zones with Midline (No Overlap Logic)Supply and demand formations based on inside bar breakouts. Automatically plots zones to buy and sell from. MTF analysis available.
Customized ATR Trailing Stop with Fixed ATR DisplayCustomized ATR Trailing Stop with Fixed ATR Display
Daily MAs IntradayThis script overlays up to 6 customizable daily moving averages on any intraday chart. It’s designed for traders who want to see higher-timeframe trend levels while operating on lower timeframes (e.g., 5m, 15m, 1h).
Each line is calculated from daily candle data and projected forward into your intraday chart. This makes it ideal for intraday traders who rely on daily MA levels for trend confirmation, support/resistance, or bounce setups.
Opening Print Line (Customizable)📈 Opening Print Line (Customizable) is a simple yet powerful intraday tool that plots the opening price of the regular trading session (RTH) and keeps it visible across the entire chart—including during pre-market and extended hours.
💡 Key Features:
🕒 Configurable time zone selector (choose from Pacific, Mountain, Central, or Eastern)
🎯 Automatically detects and plots the 9:30 AM local opening price
🎨 Customizable line color
🏷️ Optional on-chart label with editable text
This indicator is especially useful for:
Identifying opening breakout or fade setups
Anchoring support/resistance levels to the session open
Building opening range strategies or scalp setups
🔧 Built with Pine Script v6. Fully compatible with stocks, ETFs, futures, or any instrument that follows a regular session open time.
⚠️ Note: The script assumes the regular trading session starts at 9:30 AM in the selected time zone. You can modify the time if using it for futures, crypto, or other markets.
RSI Pivot Markers + Breakout Alerts + Anchored VWAPMarks RSI high price with a dotted line and marks low Pivot and puts an anchored vwap to the last rsi low price.
