รูปแบบชาร์ต
HSI First 30m Candle Strategy (5m Chart)## HSI First Candle Breakout Strategy
USE on 10m TF for max profit rate.
**The HSI First Candle Breakout Strategy** is a systematic trading approach tailored for Hang Seng Index Futures during the main Hong Kong day session. The strategy is designed to capture early market momentum by reacting to the first significant move of the day.
### How It Works
- **Reference Candle:** At the start of each day session (09:00), the high and low of the first 15-minute candle are recorded.
- **Breakout Trigger:**
- A **buy (long) trade** is initiated if price breaks above the first candle’s high.
- A **sell (short) trade** is initiated if price breaks below the first candle’s low.
- **Stop Loss & Take Profit:**
- Stop-loss is placed on the opposite side of the reference candle.
- Take-profit target is set at a distance equal to the size of the reference candle (1R).
- **Filters:**
- Skip the day if the first candle’s range exceeds 200 index points.
- Only the first triggered direction is traded per session.
- All trades are closed before the market closes if neither target nor stop is hit.
- **Execution:** The strategy works best on intraday charts (5m or 15m) and is ideal for traders seeking disciplined, systematic intraday setups.
### Key Features
- Captures the day’s initial momentum burst.
- Strict risk management with predefined stops and targets.
- One trade per day, reducing overtrading and noise.
- Clear-cut, rule-based, and objective system—no discretion required.
**This strategy offers a transparent and robust framework for traders to systematically capture high-probability breakouts in the Hang Seng Index Futures market.**
EMA 20 and Anchored VWAP with Typical PriceIntraday scalping using EMA 20 and VWAP along with targets and Stoploss
Break and Retest High Probability StrategyWhat does the script Do:
Script uses Break and Retest strategy on Key Levels like PMH, PDH, PMH, PML and ORB levels. Based on the strength of the candle at these key levels a position is taken and based on Dynamic stop loss, we scale out of the position at key levels. Scale out can also happen based on the QQQ trend.
How it does it:
First the script identifies No Trade Zone - which is higher of PMH and PDH for Highest position of No Trade Zone, and lower of PML and PDL. Any trades within this doesnt take any Trade entries.
Entries are taken in only Regular Trading Hours.
Candle strength is constantly tracked for break out these levels and then wait for retest levels based on Volatality on that day with ATR levels. If it fails to come back to retest - it is ignored else at retest levels strength of the bar is tracked. Scaling out can be done based on various Input parameters given in the strategy. VWAP and 9 EMA is also tracked for taking an entry or not.
How to use it:
Make sure to use various parameters within Inputs like Candle Strength at vwap, QQQ confluence to tweak and see what works best for the time frame and stock.
In the Multi Time frame construct - if you are on 5min time frame the candle stregth can be tracked in lower time frame which can be 1, 2, 3 min etc. This is also configurable within the Inputs.
Make sure to use the levels and values displayed in the table to see real time data.
Also, You can just have the Long entry, Short Entry and Plot variables selected in Style section to declutter the chart. Feel free to reuse the chart
what makes it original.
Strategy Parameters
• Is representative of real world trading conditions.
Break and Retest at key levels while following various confluence set ups makes it completely real world and battle tested indicator. All the parameters used within Inputs and Style are completely known Market variables.
• Is compatible with the markets their strategy is written for.
This is best for doing scalping where momentum and volatality is the king.
• Produces realistic results.
Like any strategy nothing is 100% guaranteed. But the key is to monitor the Profit factor and exit at right positions even if it means lesser number of trades.
This strategy is tested against lot of Tech stocks like nvidia, tesla, amazon against QQQ confluence.
. to help traders interpret the results they publish with their strategy,
Please feel free to tweak the parameters to tweak the strategy and see what works best for the stock you are placing this indicator on.
I primarily take the default parameters of this strategy to do scalping. The Multitime frame restest ( which goes to lower timeframe to check the strength of bars - which is again configurable by Fixed Retest bars and Retest Time Frame. I would recommend you to use Enable candle pattern filter to further refine the trades to be high probability.
This is a high probability set up - so please dont expect many trades from each stock. The strategy only gets triggered when it sees valid signal as per parameters set on the strategy.
Bollinger + Supertrend Hybrid Pro (Auto-Backtest)This strategy tell you when to huy and sell it is bollinger and supertrend
Supertrend StrategySupertrend Strateg BTCUSD
This is a trend-following strategy using the Supertrend indicator to identify market direction shifts. Here's the core logic:
Indicator Calculation:
Uses Supertrend with:
10-period ATR (volatility measurement)
3.0 multiplier (determines distance from price)
Entry Signals:
Long Entry: When Supertrend flips from downtrend (-1) to uptrend (1)
Short Entry: When Supertrend flips from uptrend (1) to downtrend (-1)
Position Management:
15% of equity risked per trade
Only 1 active position allowed (no pyramiding)
Auto-exits previous position on reversal signal
Visualization:
Price chart: Green/red Supertrend line showing current trend
Separate pane: Purple equity curve tracking performance
In essence:
The strategy goes long when a new uptrend is confirmed, goes short when a new downtrend starts, and holds only one position at a time. It aims to capture sustained trends while minimizing false signals through confirmed reversals.
New chat
Vortex Hunter X - Strategy | 2 Symbol Signal (Binance)⚙️ Vortex Hunter X - Strategy | 2 Symbol Signal (Binance)
🚨 To test the strategy and get more guidance, contact me via my communication channels!
👉 For more details, please refer to the contact sections in my profile.
This strategy is designed for trading the WIF/USDT and PEPE/USDT pairs in the Binance Futures market on the TradingView platform.
However, trades can be executed on any preferred exchange.
💡 This strategy is fully optimized and configured and requires no additional settings!
All parameters are pre-optimized, and you only need to follow the instructions to run the strategy.
For each position:
🎯 Take Profit (TP): Exactly 4% profit
❌ Stop Loss (SL): Exactly 2% loss
These values are fixed in the code (not dynamic).
🔎 Signal Accuracy | No Repainting (No Repaint)
Signals are completely non-repainting; once issued, they do not change.
Backtesting and live execution on TradingView are exactly the same, demonstrating the strategy’s high reliability.
🔁 Note on Replay Mode
In Replay mode on TradingView, discrepancies may occur compared to live or backtesting mode.
These differences arise due to how data is processed in Replay mode and the limitation of some filters accessing past data.
✅ However, this is NOT a sign of repainting;
Signals in live and backtesting modes are issued exactly the same.
🔄 Important Note: Correct Script Loading
Due to complex logic and multi-layer filters, sometimes the browser cache may prevent the script from fully loading.
✅ To ensure accurate execution:
Before first run and every few days:
🧹 Clear your browser cache
or
Use Ctrl + F5 for a full page refresh.
⚠️ Important Usage Notes
This strategy is designed ONLY for the following conditions:
🔹 Symbol: PEPEUSDT, WIFUSDT
🔹 Exchange: Binance
🔹 Market: Futures
🔹 Timeframe: 3 minutes
🔹 Chart Type: Candlestick
To receive valid signals, be sure to run it only on the PEPEUSDT or WIFUSDT chart with the above specifications on TradingView.
⚠️ Very Important Warning:
Signals are valid ONLY on the chart and settings specified in TradingView.
However, real trades can be executed on any preferred exchange (such as Binance, Bybit, OKX, etc.).
⚡️ Signal generation must be done only on TradingView with exact settings,
but order execution and trading can be done on any exchange without restriction.
⚠️ Running the strategy on the wrong symbol or timeframe will lead to incorrect signals.
✅ Signal reception and strategy execution must be done exactly with the above settings on TradingView, but trading is free on any exchange.
ℹ️ Strategy Naming Convention
Vortex Hunter X - Strategy | 1 Symbol Signal (Binance) → for 1 currency
Vortex Hunter X - Strategy | 2 Symbol Signal (Binance) → for 2 currencies
Vortex Hunter X - Strategy | 3 Symbol Signal (Binance) → for 3 currencies
Vortex Hunter X - Strategy | 4 Symbol Signal (Binance) → for 4 currencies
Vortex Hunter X - Strategy | ... Symbol Signal (Binance) → for …currencies
📌 Currently, this is active for two pairs:
PEPEUSDT (Futures – Binance)
WIFUSDT (Futures – Binance)
✅ Summary of Settings
🔧 Required settings on TradingView (by user):
⏱️ Timeframe: 3 minutes
📈 Chart Type: Candlestick
🧪 Market: Futures – Symbol: PEPEUSDT or WIFUSDT – Exchange: Binance
⚠️ Final and Very Important Note:
Due to complex logic and multi-layer filters used in this strategy, sometimes the number of signals, performance stats, or other details may not display correctly.
These changes may be caused by browser cache or incomplete page loading, preventing accurate data display.
✅ If you notice such an issue, please follow these steps:
Remove the strategy from the chart
Fully refresh the page using Ctrl + F5
Apply the strategy on the chart again
This method ensures all data and filters load correctly and full information is displayed.
❗️ Note: This issue is NOT related to repainting.
Signals remain fixed and unchanged; sometimes they may display incorrectly due to cache or incomplete loading.
❗️ Important Note for Smoother Strategy Execution:
If you are using non-Basic TradingView accounts and your chart covers more than 15 days of data,
it is recommended to activate the Signal Date Filter in the strategy settings
and set the start date to 10 or 15 days before today’s date.
This improves strategy performance, reduces processing load, and allows faster and more accurate signal display.
N4A.Dynamic ORB Algo v7.3N4A – Dynamic ORB Algo v7.3
A precision-crafted intraday breakout strategy designed for futures traders (NQ, MNQ, ES, MES), combining adaptive Opening Range Breakout (ORB) logic with a multi-layer filter engine and structured risk management. Built for flexibility across global trading sessions.
Invite-only · Source-protected
🔍 What it does
Dynamic ORB Algo captures the initial range of a selected session (Pre-London, London, New York, or Custom), waits for a confirmed breakout, and applies a configurable stack of validation filters. Its goal is to reduce false breakouts, improve signal quality, and maintain consistent risk control.
🧠 Validation Layers (Mode-dependent)
EMA Bias Filter – Enforces directional alignment using dual EMA-200 zones (High and Close).
EMA Cross-Frequency Guard – Filters unstable markets by counting trend direction flips over a selected time window.
RG Volatility Stop – Measures directional flow within a dynamic range geometry, preventing trades in sideways conditions.
Momentum Shift Check – Detects active breakouts using a custom KC-MACD derivative.
Weekday Filter – Allows disabling trades on low-liquidity days.
Each layer can be controlled manually (Custom mode) or pre-configured via:
Basic – No filters
Conservative – Trend-focused, stricter validation
Aggressive – Fast breakout capture with momentum guard
Custom – Full control of every logic component
⚙️ Execution Logic
One trade per session, triggered after a candle closes beyond the ORB high or low.
Stop-loss – Set at the mid-point of the ORB ± 7 ticks.
Profit targets – Optional exits at 0.5x, 1.0x, 1.5x, and 2.0x the ORB range; user defines the percentage split.
Time stop – Closes all trades after 270 minutes.
💲 Risk Engine
Risk per trade is controlled either via:
Fixed dollar amount (default $400), or
Percentage of account equity (default 0.8%)
Contract size is dynamically calculated using the distance from entry to stop-loss, ensuring consistent monetary risk regardless of volatility.
🌐 Session & Time-Zone Adaptability
The script includes a full time-zone selector and auto-adjusting session presets. All internal time/session functions respect your time-zone choice, making it DST-aware and usable across global markets.
🔔 Built-In Alerts
Alerts are available for validated breakout entries (long and short), ready for webhook, email, or app push notifications.
🧪 Backtest Parameters
Default backtest assumptions:
Commission: $1.80 per contract
Slippage: 2 ticks
Risk sizing logic: Matches live execution
These settings reflect realistic conditions for futures trading and align with common retail brokerage structures.
🚀 What makes this original?
This script isn’t a mash-up of common public logic. It includes:
A proprietary EMA-frequency filter that monitors directional stability over time.
An adaptive risk grid that keeps dollar exposure fixed regardless of market volatility.
Unique session handling logic that enables clean integration across major markets without user reconfiguration.
Volatility filtering based on RG envelope behavior, distinct from ATR or Bollinger-based models.
⚠️ Risk Disclosure
This strategy is provided for educational purposes only. All performance data is simulated and not indicative of future results. Do your own testing and consult a licensed advisor before live trading.
📩 To request access, message @AntonyN4A directly on TradingView.
Pine v5 · Copyright © 2025 N4A Trading Systems – All rights reserved
Curry/Schlink AKA: The Kitchen Sink! (Enhanced)# The Kitchen Sink Strategy: A Story of Brotherhood and Innovation
## The Origin Story
Deep in the Pacific Northwest, at McChord Air Force Base in Washington, two aircraft maintainers were grinding through another long shift on the flight line. The massive C-17 Globemaster towered above them as they worked side by side, turning wrenches and troubleshooting systems that kept America's airlift capability running.
These weren't just any maintainers - they were brothers in arms, bound by the unique camaraderie that only comes from working on multi-million dollar aircraft where precision and attention to detail literally means life or death. One was a seasoned Crew Chief, the other an Engine troop - different specialties, but united by the same Air Force blue and the same dream of financial freedom beyond their military paychecks.
During those long nights between sorties, conversations would drift from hydraulic systems and engine diagnostics to something that fascinated them both: the financial markets. They'd watch charts on their phones during breaks, discussing price movements with the same analytical mindset they brought to aircraft troubleshooting.
**The Air Force taught them systems thinking** - how multiple components work together to create something greater than the sum of their parts. It taught them discipline, risk management, and the critical importance of checklists and procedures. Most importantly, it taught them that when lives are on the line, you don't wing it - you follow proven processes.
They realized that if they could master the complexities of keeping 585,000-pound aircraft mission-ready, they could certainly figure out how to read market patterns.
## Birth of "The Kitchen Sink"
Working in the maintenance world, they knew the value of redundancy. Aircraft have backup systems for their backup systems. So when they started developing their trading strategy, they applied the same principle: **multiple confirmation systems working together**.
They called it "The Kitchen Sink" - not because it was messy, but because they threw everything reliable into it. Just like their aircraft pre-flight checklists, every component had to work in harmony before they'd commit to a trade.
**Their mission was clear**: Create a strategy that would help fellow maintainers - Crew Chiefs, Engine troops, Avionics techs, and all the hardworking enlisted personnel - dominate the markets and build wealth beyond their military careers.
## How to Use The Kitchen Sink Strategy
### Understanding the Components
This strategy combines multiple technical indicators, just like aircraft systems work together:
**1. Triple Moving Average System (The Trend Engine)**
- Uses three different timeframe averages that must align
- Think of it like your aircraft's three-engine redundancy
- **For uptrends**: Price must be above the short average, short above medium, medium above long
- **For downtrends**: The reverse - everything cascading downward
- This creates a strong directional filter
**2. Volume Confirmation (The Power Check)**
- Requires above-average volume to validate moves
- Like checking engine power settings before takeoff
- No volume = no conviction = no trade
**3. RSI Filter (The Momentum Gauge)**
- Choose your RSI logic based on market conditions:
- **"Standard (Momentum)"**: Trade with the trend - buy strength, sell weakness
- **"Contrarian (Mean Reversion)"**: Trade pullbacks - buy dips, sell spikes
- **"Disabled"**: Remove RSI filter entirely
- Experiment to see what works for your trading style
**4. Time Filter (Operations Schedule)**
- Only trades during active market hours (default: 7 AM - 4 PM)
- Avoids low-liquidity periods
- Just like how aircraft ops follow specific schedules
### Risk Management (Mission Critical)
**ATR-Based Stop Losses and Take Profits:**
- **ATR (Average True Range)** automatically adjusts your risk based on market volatility
- Volatile markets = wider stops, Calm markets = tighter stops
- Default settings: 2.0 ATR for profits, 1.5 ATR for stops
- This gives you approximately 1.33:1 reward-to-risk ratio
**Position Sizing:**
- Default: **2% of account per trade** (much safer for beginners)
- Can be adjusted from 1-3% based on your risk tolerance and experience
- **Never risk more than you can afford to lose**
- As a maintainer, you know that safety margins save lives - same principle applies to trading
### How to Read the Signals
**Buy Signal Requirements (ALL must be true):**
- Bullish moving average alignment ✓
- Volume above average ✓
- RSI condition met (based on your selected logic) ✓
- Within trading hours ✓
- Green arrow appears below the candle
**Sell Signal Requirements (ALL must be true):**
- Bearish moving average alignment ✓
- Volume above average ✓
- RSI condition met ✓
- Within trading hours ✓
- Red arrow appears above the candle
### Pro Tips for Success
**1. Start Small**
- Paper trade first to understand the signals
- Begin with smaller position sizes until you're comfortable
**2. Backtest Different Settings**
- Try different RSI logic modes
- Adjust ATR multipliers based on your risk tolerance
- Test various timeframes to find your sweet spot
**3. Maintain Discipline**
- Follow the signals - don't second-guess the system
- Stick to your risk management rules
- Keep detailed trade logs
**4. Market Adaptation**
- Switch RSI logic based on market conditions
- Use "Standard" in trending markets
- Use "Contrarian" in ranging markets
### The Maintainer's Advantage
As military maintainers, you already have the discipline, attention to detail, and systems thinking that most traders lack. You understand:
- Following procedures saves lives (and money)
- Redundant systems prevent failures
- Regular maintenance prevents major breakdowns
- Teamwork and continuous learning are essential
**Crew Chiefs and Engine troops unite!** This strategy was built by maintainers, for maintainers. It's your ticket to financial freedom beyond the flight line.
Remember: Just like aircraft maintenance, trading is about consistency, discipline, and following proven procedures. The markets might not have Technical Orders, but this strategy is your trading manual.
*Stay disciplined, stay profitable, and may your trades always be mission-ready.*
---
**Disclaimer**: Trading involves risk. Always use proper risk management and never trade with money you can't afford to lose. This strategy was developed for educational purposes and past performance doesn't guarantee future results.
LANZ Strategy 6.0 [Backtest]🔷 LANZ Strategy 6.0 — Precision Backtesting Based on 09:00 NY Candle, Dynamic SL/TP, and Lot Size per Trade
LANZ Strategy 6.0 is the simulation version of the original LANZ 6.0 indicator. It executes a single LIMIT BUY order per day based on the 09:00 a.m. New York candle, using dynamic Stop Loss and Take Profit levels derived from the candle range. Position sizing is calculated automatically using capital, risk percentage, and pip value — allowing accurate trade simulation and performance tracking.
📌 This is a strategy script — It simulates real trades using strategy.entry() and strategy.exit() with full money management for risk-based backtesting.
🧠 Core Logic & Trade Conditions
🔹 BUY Signal Trigger:
At 09:00 a.m. NY (New York time), if:
The current candle is bullish (close > open)
→ A BUY order is placed at the candle’s close price (EP)
Only one signal is evaluated per day.
⚙️ Stop Loss / Take Profit Logic
SL can be:
Wick low (0%)
Or dynamically calculated using a % of the full candle range
TP is calculated using the user-defined Risk/Reward ratio (e.g., 1:4)
The TP and SL levels are passed to strategy.exit() for each trade simulation.
💰 Risk Management & Lot Size Calculation
Before placing the trade:
The system calculates pip distance from EP to SL
Computes the lot size based on:
Account capital
Risk % per trade
Pip value (auto or manual)
This ensures every trade uses consistent, scalable risk regardless of instrument.
🕒 Manual Close at 3:00 p.m. NY
If the trade is still open by 15:00 NY time, it will be closed using strategy.close().
The final result is the actual % gain/loss based on how far price moved relative to SL.
📊 Backtest Accuracy
One trade per day
LIMIT order at the candle close
SL and TP pre-defined at execution
No repainting
Session-restricted (only runs on 1H timeframe)
✅ Ideal For:
Traders who want to backtest a clean and simple daily entry system
Strategy developers seeking reproducible, high-conviction trades
Users who prefer non-repainting, session-based simulations
👨💻 Credits:
💡 Developed by: LANZ
🧠 Logic & Money Management Engine: LANZ
📈 Designed for: 1H charts
🧪 Purpose: Accurate simulation of LANZ 6.0's NY Candle Entry system
MNQ 5m FVG MTF StrategyMNQ 5m FVG MTF Strategy** is a single-contract breakout system built for Micro NASDAQ futures. It uses a multi-timeframe approach to align with smart-money trading principles:
* **4H** trend direction via EMA 200 and MACD histogram
* **1H** fair value gap (FVG) detection
* **5M** entry confirmation with momentum above/below EMA 20
* Dynamic **ATR-based take profit**, **trailing stop**, and **timeout exits**
Designed for clean directional trades with minimal noise.
Gold 15m Candlestick + MACD Strategy with ATR SL/TP + AlertsThis strategy is designed for trading Gold (XAUUSD) on short timeframes. It identifies potential reversal points in the market using price action and confirms momentum before entering trades. Each position includes a predefined stop loss and take profit, with every trade targeting at least 1.5 times the risk taken. The strategy also filters out low-volume conditions to avoid false signals and adapts to market volatility for smarter risk management.
MNQ 3m 3-Con Momentum Breakout**Description:**
This is a high-frequency momentum breakout scalping strategy built for the MNQ futures contract on the 3-minute chart. It uses multi-timeframe confirmation from the 1-hour EMA and MACD histogram to align trades with broader trends. Trade entries trigger on breakout conditions with additional RSI filtering for confirmation. The bot opens positions with 3 contracts and scales out dynamically in two stages as profits accumulate. A trailing stop and timeout logic are used for final exits, while a cooldown between trades helps reduce overtrading.
---
**Trade Logic Summary:**
**Buy Entry (Long):**
* Price > 1H EMA200
* 1H MACD histogram > 0
* RSI > 50
* Breakout above recent 20-bar high (on 3m)
* No open position, cooldown period met
* Enters with 3 contracts
**Sell Entry (Short):**
* Price < 1H EMA200
* 1H MACD histogram < 0
* RSI < 50
* Breakdown below recent 20-bar low (on 3m)
* No open position, cooldown period met
* Enters with 3 contracts
**Exit/Scaling Logic:**
* Scales out 1 contract after ATR-based profit level hit
* Scales out another after 1.5× ATR profit
* Remaining contract managed with a trailing stop and timeout exit
MNQ 3m 2-Con Momentum Breakout**Description:**
This is a multi-timeframe momentum breakout scalping strategy designed for trading the MNQ (Micro E-mini Nasdaq) futures contract on the 3-minute chart. It leverages higher-timeframe trend confirmation (1-hour EMA200 and MACD histogram) to filter trades in the direction of market momentum, then executes breakout entries based on recent price extremes. The bot enters with 2 contracts and dynamically scales out 1 contract at a predefined ATR-based profit level. Trailing stops and timeout exits help secure profits and limit exposure.
**Trade Logic:**
**Buy Conditions:**
* 1H trend is bullish: Price > EMA200 and MACD histogram > 0
* 3M breakout above last 20-bar high
* Enters 2 contracts
* Scales out 1 contract once price exceeds entry + ATR \* multiplier
* Trailing stop and timeout used for final contract
**Sell Conditions:**
* 1H trend is bearish: Price < EMA200 and MACD histogram < 0
* 3M breakdown below last 20-bar low
* Enters 2 contracts
* Scales out 1 contract once price drops below entry - ATR \* multiplier
* Trailing stop and timeout used for final contract
**Features:**
* Higher timeframe (1H) trend filtering for directional bias
* ATR-based profit trigger and stop logic
* Dynamic contract scaling for smoother exits
* Timeout logic for stale trades
* Fully compatible with automated strategy testing
XAUUSD Reversal + MACD + ATR + Volume StrategyThis strategy is designed for trading Gold (XAUUSD) on short timeframes. It identifies potential reversal points in the market using price action and confirms momentum before entering trades. Each position includes a predefined stop loss and take profit, with every trade targeting at least 1.5 times the risk taken. The strategy also filters out low-volume conditions to avoid false signals and adapts to market volatility for smarter risk management.
MNQ 3m Momentum Breakout3 Con MNQ Scaling
The script has been updated to:
Enter trades with 3 contracts.
Scale out 1 contract at a time at two separate profit trigger levels for smoother exit behavior.
Maintain your existing logic and filters.
MNQ 3m Momentum BreakoutThis MNQ 3-minute momentum breakout strategy identifies high-probability trades in the direction of the 1-hour trend, enters with 2 contracts on breakouts, and intelligently scales out after reaching an ATR-based profit target. The remaining position is managed with a trailing stop or closed after a timeout.
**Entry Logic:**
* **Long:** Price breaks above 20-bar high **and** 1H trend is up (EMA 200 + MACD > 0)
* **Short:** Price breaks below 20-bar low **and** 1H trend is down
**Position Management:**
* **Start:** Enter with 2 contracts
* **Scale out:** Close 1 contract after reaching ATR-based profit trigger
* **Final exit:** Trailing stop or timeout (30 bars)
**Filters:**
* Multi-timeframe EMA + MACD for trend confirmation
* 3-minute chart for high-frequency entries with precision
MNQ 1H Liquidity + MTF BotThis Pine Script is a 1-hour trading strategy for MNQ futures that uses higher-timeframe confirmation, liquidity grabs, MACD alignment, and ATR-based targets to identify high-probability trades. The strategy only triggers entries during specific hours and includes a simple risk-reward structure with defined stop loss and take profit levels.
**Buy (Long) Conditions:**
* Current hour is within allowed trading window
* 4H price is above 4H EMA 200
* 4H MACD line is above its signal
* 1H MACD is bullish
* Either a breakout above recent highs or a liquidity grab below recent lows
* No existing long position
**Sell (Short) Conditions:**
* Current hour is within allowed trading window
* 4H price is below 4H EMA 200
* 4H MACD line is below its signal
* 1H MACD is bearish
* Either a breakdown below recent lows or a liquidity grab above recent highs
* No existing short position
**Core Strategy Components:**
* Multi-timeframe trend alignment (4H MACD + EMA 200)
* 1H MACD for local momentum
* Liquidity grab detection using price structure
* ATR-based stop loss and take profit
* Time window filter for active trading hours
* Fixed percentage position sizing
Monday-Range Strategy This strategy takes range-breakout entries based on Monday’s daily open, high, low, and midpoint (EQ).
* - Entries:
* • Long when price crosses above Monday’s Open
* • Short when price crosses below Monday’s EQ (midpoint)
* - Exits:
* • Long exits at Monday’s High (limit) or Monday’s EQ (stop)
* • Short exits at Monday’s Low (limit) or Monday’s Open (stop)
Vortex Hunter X - Strategy | SUI Signal (Binance)⚙️ Vortex Hunter X - Strategy | SUI Signal (Binance)
🚨 To test the strategy and get more guidance, contact me via my communication channels! 🚨
👉 For more details, please refer to the contact sections in my profile.
This strategy is designed for executing trades on the SUI/USDT pair in the Futures market on Binance and on the TradingView platform. However, trades can be executed on any preferred exchange.
💡 This strategy is perfectly optimized and configured, and requires no additional settings!
All parameters and settings are pre-optimized, and you just need to follow the instructions to run the strategy.
For each position:
Target (TP): Exactly 4% profit
Stop Loss (SL): Exactly 2% loss
These values are fixed in the code (not dynamic).
🔎 Signal Accuracy | No Repainting
Signals are completely non-repainting; once a signal is issued, it does not change.
Backtesting and live execution on TradingView are exactly the same, demonstrating the high reliability of the strategy.
🔁 Note about Replay Mode
In Replay mode on TradingView, there may be discrepancies compared to live execution or backtesting.
These differences arise due to how data is processed in Replay mode and the limitation of some filters accessing past data.
✅ However, this is NOT a sign of repainting;
Signals in live mode and backtesting are issued exactly the same without any difference.
🔄 Important Note: Correct Script Loading
Due to complex logic and multi-layer filters, sometimes browser cache may prevent the script from fully loading.
✅ To ensure accurate performance:
Before first run and every few days:
Clear your browser cache
Or use Ctrl + F5 for a full refresh.
⚠️ Important Usage Notes
This strategy is designed ONLY for the following conditions:
Symbol: SUIUSDT
Exchange: Binance
Market: Futures
Timeframe: 3 minutes (3m)
Chart Type: Candlestick (Candles)
To receive valid signals, be sure to run it only on the SUIUSDT chart (Futures | 3m | Binance | Standard Candles) on TradingView.
⚠️ Critical and Important Note:
Signals are valid ONLY on the above chart and settings on TradingView.
However, you can execute real trades on any preferred exchange (Binance, Bybit, OKX, etc.)!
⚡️ Signal generation must be done only on TradingView with exact settings,
but order execution and trading have no restrictions on the exchange used.
⚠️ Running the strategy on wrong symbol or timeframe will lead to incorrect signals.
✅ Strategy execution and signal reception must be done exactly with the above settings on TradingView, but trades can be executed on different exchanges.
ℹ️ Strategy Naming Convention
The currency name is clearly stated in each strategy name:
Vortex Hunter X - Strategy | SUI Signal (Binance) → for SUI
Vortex Hunter X - Strategy | PEPE Signal (Binance) → for PEPE
📌 Currently, this strategy is active for the following two pairs:
SUIUSDT (Futures – Binance)
PEPEUSDT (Futures – Binance)
🪙 By purchasing one subscription, you will have access to both versions.
🚀 New currencies will be added soon and subscribers will have access to future versions.
✅ Settings Summary
🔧 Required settings on TradingView (by user):
⏱️ Timeframe: 3 minutes
📈 Chart Type: Candlestick (Candles)
🧪 Market: Futures – Symbol: SUIUSDT – Exchange: Binance
⚠️ Final and Important Note:
Due to the use of complex logic and multi-layer filters in this strategy, sometimes the number of signals, performance stats, or other details may not display correctly. These changes may be caused by issues like browser cache or incomplete page loading, which prevent accurate data display.
✅ If you notice such an issue, please follow these steps:
Remove the strategy from the chart
Completely close the browser
Reopen the browser and go back to TradingView
Refresh the page fully using Ctrl + F5
Apply the strategy to the chart again
This method ensures all data and filters load correctly and full information is displayed.
❗️ Note: This issue is NOT related to repainting. Signals remain fixed and unchanged; sometimes they may display incorrectly due to cache or incomplete loading.
Multi-Pair Matrix📊 Multi-Pair Matrix — Strategy Overview
This invite-only strategy works across five major crypto pairs: BTC, ETH, XRP, DOT, and SOL. It combines multiple confirmation signals and risk-management tools into one unified script.
🔍 Core Logic
The strategy uses a combination of proven technical tools:
Price Action Patterns: Breakouts, rejections, and reversal zones
EMA Crossovers: Short- and long-term trend confirmation
Stochastic Oscillator: Identifies exhaustion and entry opportunities
MACD Histogram: Filters entries by confirming directional momentum
Dynamic SL/TP Logic: Each trade has an independent stop-loss and take-profit based on market conditions
Delayed Entry System: Prevents immediate re-entry after closing in the opposite direction
Smart Trailing Stop-Loss: Adjusts as price moves to secure gains
⚙️ Capital Allocation & Pyramiding
The strategy uses strategy.percent_of_equity = 100, but only ~10% margin is used per position
This leaves headroom for controlled pyramiding without risking full account exposure
🔁 Recommended Pyramiding Settings per Pair
Pair -Pyramiding
BTC - 6
ETH - 6
XRP - 8
DOT - 5
SOL - 7
🧪 Backtest Conditions
Commission: 0.1% per trade
Slippage: 3 ticks
Capital: realistic margin use per trade
Pair displayed in this publication: XRP
This pair is shown in the current backtest example due to platform limitations
The remaining pairs follow the same internal logic and backtest methodology, but are not visible in a single report
⚠️ Usage Instructions
To use this script for real-time alerts:
Open the Inputs tab and enable “Live Trading Mode”
Choose your desired pair from the dropdown — this will automatically apply the correct settings
The script is designed for lower timeframe markets and is optimized for high-activity, volatile periods
All logic is contained in a single script as required — no suite publishing or duplicated variations
Vortex Hunter X - Strategy (3-Min TF) | PEPE Signal (Binance)⚙️ Vortex Hunter X - Strategy (3-Min TF) | PEPE Signal (Binance)
This strategy is designed for analyzing the PEPE/USDT pair on Binance Futures within the TradingView platform, and can be used to execute trades on any exchange of your choice.
Each position has a fixed 4% profit target and a fixed 2% stop loss. These parameters are hard-coded and do not change dynamically. The risk-to-reward ratio is fixed at 1:2.
🔎 Non-Repainting Signals and Consistency Between Backtest and Live Trading
The signals generated by this strategy are completely non-repainting, meaning once a signal is issued, it will not be altered or modified later.
Backtesting results and live trading performance on TradingView are exactly consistent, demonstrating the high reliability of the strategy.
🔁 Note About Replay Mode on TradingView
When running the strategy in Replay mode on TradingView (historical playback of the chart), you may notice some differences compared to live or backtest results.
These differences arise due to the way data is processed in Replay mode and delays in how certain filters access past information.
✅ However, it is important to understand that these differences do not indicate any repainting of signals. In live and backtest modes, signals are generated exactly according to the strategy’s logic without any changes.
🔄 Important Recommendation for Proper Script Loading
Due to the use of complex filters, multi-stage processing, and sensitive conditions in the signal logic, sometimes the browser cache may cause the script not to load fully or precisely, or some components may load with delays.
This can lead to signals not displaying correctly or minor issues in the strategy’s performance.
✅ Therefore, it is strongly recommended to clear your browser cache or press Ctrl + F5 for a full refresh on the TradingView chart page before the first use and periodically (e.g., every few days).
This ensures the script loads freshly and completely from TradingView servers, enabling accurate and smooth strategy operation.
⚠️ Important Usage Notes:
🔸 This strategy is specifically designed and optimized only for the following conditions:
Symbol: PEPEUSDT
Exchange: BINANCE
Market: Futures
Timeframe: 3 minutes (3m)
🔸 For accurate signals, please ensure the strategy runs only on the PEPE/USDT Futures chart on Binance with a 3-minute timeframe in TradingView.
🔸 ⚠️ Note: For actual trading execution, you may use any exchange (e.g., Binance, Bybit, OKX, etc.), but analysis and strategy operation must be performed strictly within TradingView with the exact above settings.
Using the strategy on incorrect symbols, timeframes, or markets may result in invalid signals.
ℹ️ Strategy Naming:
Each strategy’s name clearly indicates the asset it is configured for.
For example:
Vortex Hunter X - Strategy (3-Min TF) | PEPE Signal (Binance) for PEPE
Vortex Hunter X - Strategy (3-Min TF) | SUI Signal (Binance) for SUI
Currently, the strategy is configured and optimized for only these two pairs:
PEPEUSDT (Binance Futures)
SUIUSDT (Binance Futures)
📌 Purchasing a single subscription grants you access to both strategies (PEPE and SUI).
📈 More assets will be added to this strategy in the future, and subscribers will gain access to new versions automatically.
✅ Summary of Settings:
🎯 Take Profit (TP): 4%
⛔ Stop Loss (SL): 2%
📊 Risk-to-Reward Ratio: 1:2
⏱️ Timeframe: 3 minutes
🧪 Target Market: PEPE Futures on Binance
📩 For access or support, contact:
GOLD - 3min - LA TimeZone | US Daily Trade🔰 Strategy Description
GOLD - 3min - LA TimeZone (Buy & Sell) is a precision-engineered breakout-reentry strategy designed for Gold (XAUUSD) during the Los Angeles session, optimized for the 3-minute timeframe.
It identifies the Opening Range (first 60 minutes starting at 18:00 LA time), waits for price to break outside the range, and then looks for a reentry signal back into the range — a powerful reversal pattern often seen in gold.
📌 Key Features
⏰ Session Time: Designed for the LA session (18:00–19:00)
📈 Reentry Logic: Signals when price moves back inside the range from outside (either top or bottom)
🎯 Take-Profit & Stop-Loss: Fully adjustable via inputs (default TP: 1%, SL: 0.5%)
🛑 Force Close: Automatically closes open positions at 17:55 LA time
🔔 Alerts Enabled: Buy, Sell, and Force Close alerts included
🧠 Notes
Only one trade per day is allowed to reduce overtrading.
Built for fast scalping and reversal catching on gold.
Works best on volatile days with clear opening moves.
Feel free to test, customize risk settings, and align this tool with your own trading plan.
Backtest it thoroughly before using in live environments.
📊 Published by: US Daily Trade