Michael LipsiusTitle: Michael Multi-Timeframe Trend Dashboard (HTF Bias & LTF Execution)
Description:
Overview This indicator is a specialized Top-Down Analysis tool designed to assist traders in identifying the dominant market direction across multiple timeframes instantly. Built around the principles of Michael's Trading Strategy and institutional trend following, this dashboard eliminates the noise and provides a clear, color-coded directional bias (Prognosis) for both High Time Frame (HTF) structure and Low Time Frame (LTF) momentum.
Core Functionality The dashboard generates a real-time matrix displayed directly on the chart, analyzing price action relative to the 50-period Exponential Moving Average (EMA). This specific metric is chosen to filter out minor fluctuations and reveal the true institutional flow of money.
1. High Time Frame (HTF) Prognosis – The "Compass" The indicator monitors the Daily (D1) and 4-Hour (H4) timeframes to establish the macro trend.
Bullish 🟢: Price is holding above the 50 EMA. This indicates that Smart Money is accumulating, and traders should focus primarily on Long setups.
Bearish 🔴: Price is trading below the 50 EMA. This suggests institutional distribution, meaning Short setups have a higher probability of success.
Purpose: The HTF modules act as your safety filter. By respecting the D1/H4 signals, you avoid trading against the major trend, significantly reducing the risk of being stopped out by macro flows.
2. Low Time Frame (LTF) Execution – The "Trigger" Simultaneously, the indicator analyzes the 1-Hour (H1) and 15-Minute (M15) timeframes.
These timeframes are crucial for timing entries and managing intraday volatility.
Conflict Warning: If the HTF is Bullish (Green) but the LTF is Bearish (Red), the market is likely in a pullback phase. This warns the trader to wait for the LTF to realign with the HTF before entering.
How to Use This Tool This dashboard is designed to be the first step in your trading routine:
Check Confluence: Look for a "Full Green" or "Full Red" board. When D1, H4, and H1 align, the probability of a successful trade increases exponentially.
Identify Pullbacks: If D1/H4 are Green, but M15 is Red, do not sell. Instead, treat this as a discount phase and wait for the M15 to flip back to Green for a high-precision entry.
Risk Management: Use the HTF bias to determine your risk exposure. Trade with full risk only when HTF and LTF are aligned.
Settings & Customization
Table Position: Fully adjustable (Top Right, Bottom Right, etc.) to fit your workspace.
EMA Period: Default is set to 50 (Standard Michael Strategy), but can be adjusted to fit other strategies.
Visuals: Clean, non-intrusive design with clear color coding for instant readability.
Disclaimer This tool is for informational purposes only and serves as a trend-confirmation aid. It should be used in conjunction with price action analysis, key levels, and proper risk management.
การวิเคราะห์แท่งเทียน
Harmonic & Candle Confluence [Trader-Alex]Overview
This indicator is a comprehensive Price Action system designed to validate trade setups through Candlestick Patterns and Real-Time RSI Divergence.
While it is optimized to work as the perfect companion for my Ultimate Auto Harmonic Pattern indicator, it functions fully as a standalone tool for any trader looking to combine specific market structures with precise entry timing.
Design Philosophy
Harmonics define the "Where": The Auto HP indicator (seen in screenshots) locates the reversal structure.
Candles define the "When": This indicator validates the reversal with specific candlestick patterns and RSI divergence.
Key Features
1. Smart Candle Coloring (Reversal & Continuation)
Aqua (Bullish) / Fuchsia (Bearish): Highlights high-probability reversal patterns (Engulfing, Hammer/Star, Morning/Evening Star) specifically filtered by RSI extremes.
Yellow (Continuation/Indecision): Identifies strong momentum candles (RSI 40-60 break) or neutral Dojis, helping you stay in the trend or wait for clarity.
Note: Includes a 0.01% tolerance logic to adapt to Crypto market fluctuations.
2. Real-Time MTF Divergence Dashboard
A dashboard in the top-right corner monitors RSI Divergence across 4 timeframes (5m, 15m, 1H, 4H) simultaneously.
Status Indicators:
Warning: Divergence structure formed, but RSI hasn't hooked yet (Early sign).
Confirmed: RSI has hooked, validating the divergence (Entry signal).
3. One-Click Theme Switcher
Built-in "Dark Mode" and "Light Mode" switch in settings to instantly adapt colors to your chart background.
How to Use with Harmonic Patterns
1. Wait for the PRZ: Let the Ultimate Auto Harmonic Pattern indicator complete a pattern (e.g., Gartley, Bat, Shark).
2. Watch for Color: Wait for a Fuchsia (Bearish) or Aqua (Bullish) candle to close inside or near the PRZ.
3. Check the Dashboard: Look for a "Confirmed" divergence signal on the current or higher timeframe to increase win rate.
⚠️ Important Note The Harmonic Patterns (Gartley, Crab, Shark, etc.) shown in the screenshots are generated by the "Ultimate Auto Harmonic Pattern ". This script ("Harmonic & Candle Confluence") contains the Candle Coloring and the MTF Table only. It is intended to be used as an auxiliary tool to validate harmonic setups.
--------------------------------------------------------------------------------------------
Harmonic & Candle Confluence (諧波K線共振系統)
簡介
這是一個綜合性的價格行為（Price Action）交易系統，旨在透過 K線型態識別 與 即時 RSI 背離偵測 來驗證交易機會。
雖然此指標特別優化作為 "Ultimate Auto Harmonic Pattern" 的輔助確認工具，但它完全具備獨立運作的能力，適合任何希望結合「關鍵價位」與「精確進場時機」的交易者使用。
設計核心
諧波負責「空間 (Where)」: 由主指標負責尋找蝴蝶、蝙蝠等型態。
本指標負責「時機 (When)」: 利用K線型態與背離，確認反轉已經發生。
核心功能
1. 智慧 K 線染色 (反轉與中繼)
淺藍 (看多) / 洋紅 (看空): 標記高勝率的反轉 K 線組合（如吞噬、錘頭、晨星/暮星）。系統內建 RSI 過濾與容錯機制，過濾無效雜訊。
黃色 (中繼/猶豫): 標記趨勢延續的大實體 K 線（RSI 強勢區）或中性十字線，協助判斷是該加碼還是觀望。
2. 即時多週期背離儀表板 (MTF Dashboard)
圖表右上角表格即時監控 5分、15分、1小時、4小時 的 RSI 背離狀態。
狀態區分:
徵兆 (Warning): 價格創新高/低，但 RSI 尚未反轉（預警訊號）。
確立 (Confirmed): RSI 已勾頭，背離確認生效（進場訊號）。
3. 一鍵主題切換
設定中內建「深夜模式」與「明亮模式」開關，一鍵切換所有配色以適應您的看盤環境。
搭配諧波型態的實戰用法
1. 等待 PRZ: 當主指標 (Ultimate Auto HP) 繪製出諧波型態（如 Gartley, Bat, Shark）。
2. 確認 K 線: 觀察價格是否在 PRZ 內出現 洋紅色 (看空) 或 淺藍色 (看多) 的 K 線訊號。
3. 儀表板共振: 檢查右上角表格，確認是否出現該週期或更大週期的「背離確立」訊號，達成共振即可進場。
⚠️ 重要說明 說明圖中顯示的諧波型態連線（Gartley, Crab 等）來自 "Ultimate Auto Harmonic Pattern "。 本腳本 ("Harmonic & Candle Confluence") 僅包含 K 線染色與背離表格功能。 它是為了輔助確認諧波交易訊號而設計的專用工具。
LuxAlgo Swing Breakout Sequence modified by Burdy TraderSwing Breakout Sequence - Modified with Doji Detection
📊 OVERVIEW
This modified version of LuxAlgo's Swing Breakout Sequence indicator enhances the original pattern detection with an advanced Doji candlestick detection feature. The indicator identifies 5-point swing sequences (A, B, 1, 2, 3) and optionally extends to detect points 4 and 5 for complete breakout patterns.
🔍 KEY FEATURES
Automatic Swing Detection: Identifies bullish and bearish swing sequences based on customizable pivot length
Visual Sequence Mapping: Clear labeling of all sequence points (A, B, 1, 2, 3, 4, 5)
Doji Detection System (NEW): Detects doji candles forming outside the A-B range after point 2 is confirmed
Smart Timeout Logic: Automatically marks failed doji signals with red ✕ if point 3 doesn't confirm within 5 candles
Flexible Display Options: Toggle boxes, lines, paths, and customize colors
Strict/Relaxed Modes: Choose between strict equal H/L requirements or relaxed threshold-based matching for point 5
⚙️ CUSTOMIZATION
Swing Length: Adjust pivot detection sensitivity (default: 5)
Point 4 Beyond Point 2: Enable stricter point 4 placement rules
Show Point 5: Toggle double top/bottom detection
Doji Threshold: Control doji sensitivity (0.1 = 10% body-to-range ratio)
Auto/Manual Coloring: Smart color adaptation or custom scheme
💡 HOW TO USE
Bullish sequences form when price creates lower swing points that stay within defined ranges
Bearish sequences form when price creates higher swing points within ranges
Blue dots indicate potential continuation when doji appears outside A-B range
Red ✕ marks indicate doji signals that failed to confirm within 5 bars
Use confirmed sequences (points 1-4) for potential reversal/continuation setups
📈 TRADING APPLICATIONS
Identify potential reversal zones at point 5 (double top/bottom)
Spot early continuation signals via doji detection after point 2
Track multi-swing price structures for better context
Combine with volume/momentum indicators for confirmation
👍 SUPPORT THIS WORK
If you find this indicator helpful, please:
Like this script to show your appreciation
Follow me for more trading tools and updates
Share your feedback and suggestions in the comments
Your support helps me continue developing free tools for the trading community!
© CREDITS
Original indicator: Swing Breakout Sequence by LuxAlgo
Modified by:
This work is licensed under Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)
creativecommons.org
⚠️ DISCLAIMER
This indicator is for educational and informational purposes only. It is NOT financial advice. Trading involves substantial risk of loss and is not suitable for all investors. Past performance does not guarantee future results. Always conduct your own research and consult with a qualified financial advisor before making any trading decisions. The author and LuxAlgo assume no responsibility for any losses incurred from using this indicator.
SilverHawk SmoothHA DuoSilverHawk SmoothHA Duo
This indicator plots dual smoothed Heiken Ashi candles (10/10 fast + 20/20 slow) for trend confirmation.
Features:
- Fast (10/10) smoothed HA candles (lime/red)
- Slow (20/20) smoothed HA candles (lighter lime/red)
- Alignment note (middle-left): shows if 10/10 and 20/20 match (bull/bear/not aligned)
- Alerts on trend flips (bullish/bearish for each layer or any flip)
Settings:
- Show 10/10 or 20/20 candles: toggle visibility
- Len / Len2: smoothing periods (default 10/10 and 20/20)
- Colors: customize bullish/bearish gradients
- Show Alignment Note: toggle status text
- Enable Alerts: toggle flip alerts
- Trigger On Bar Close Only: non-repainting alerts
Best used on H1 to D1 timeframes in Forex or indices for confirming trend direction and alignment. Use with proper risk management and confirmation.
Educational tool only. Not financial advice. Trading involves risk.
FVG Scalping (HieuMinh)Script Description: Multi-Timeframe Trend & FVG Scalper
This indicator is a comprehensive technical analysis tool designed for scalpers and day traders who focus on price action and trend confluence. It combines dynamic trend tracking, imbalance identification, and multi-timeframe analysis into a single, clean interface.
Key Features:
Advanced Trend Visualization: Uses a multi-EMA system to define market direction. It includes a ribbon fill to visualize momentum and a customizable long-term moving average to help traders stay on the right side of the primary trend.
Automated Fair Value Gap (FVG) Detection: The script automatically identifies and highlights bullish and bearish price imbalances (Fair Value Gaps). These zones are plotted as visual boxes and can be extended to predict future areas of institutional interest or price magnets.
Interactive "Touch" Highlights: A unique feature that alerts traders when price action interacts with established FVG zones. The script visually modifies candle colors and adds signal markers when a "retest" or "touch" of an imbalance occurs, aiding in high-precision entries.
Multi-Timeframe Trend Dashboard: Includes an integrated on-screen table that monitors trend status across six different timeframes simultaneously (from 2-minute to 15-minute intervals). This allows traders to confirm that lower-timeframe scalps are aligned with higher-timeframe momentum without switching charts.
Visual Signal System: Provides clear "Long" and "Short" diamond markers based on momentum crossovers, designed to filter out market noise and focus on high-probability trend shifts.
Highly Customizable UI: Traders can toggle visibility for individual components (EMA lines, FVG boxes, labels, and dashboard) to maintain a clean workspace tailored to their specific strategy.
How to Trade with FVG Scalping (Hiếu Minh)
This indicator simplifies complex price action into color-coded signals. Here is the general strategy for identifying potential entries:
🔵 Finding Long Opportunities (Bullish Confluence)
Focus on buying when the market shows strength and institutional support.
The Setup: Look for the Multi-Timeframe Dashboard to show green status across several timeframes.
The Trigger: When price retraces into a Bullish FVG zone and the script identifies a successful test, the candle will turn Blue and a Blue Dot will appear below the bar.
Confirmation: Ideally, the "LONG" diamond signal should be visible, confirming that the short-term EMAs have crossed bullishly.
🟠 Finding Short Opportunities (Bearish Confluence)
Focus on selling when the market shows weakness and overhead resistance.
The Setup: Look for the Multi-Timeframe Dashboard to show red status, indicating a broad downtrend.
The Trigger: When price bounces into a Bearish FVG zone and meets resistance, the script will highlight the candle in Orange/Red and place a Red Dot above the bar.
Confirmation: Look for the "SHORT" diamond signal to appear, indicating that momentum has shifted back to the downside.
Inside Bar Breakout ( candlestick pattern).📌 What Is This Indicator?
BOIB Pro identifies a very strict form of inside bar:
✅ The inside bar candle’s entire range (body + wicks) must be inside the BODY of the previous candle (mother candle).
❌ If even a single wick is outside the mother body, the setup is rejected.
This filters out weak and noisy inside bars and focuses only on true compression candles.
⸻
📐 Pattern Rules (Strict)
1️⃣ Mother Candle
• The candle immediately before the inside bar
2️⃣ Body-Only Inside Bar (BOIB)
A valid BOIB must satisfy:
• Inside bar high ≤ mother candle body high
• Inside bar low ≥ mother candle body low
⚠️ Normal inside bars (inside wicks only) are ignored.
⸻
⏱️ Breakout Window Logic
After a valid BOIB forms:
• The indicator waits for the next 1 to 5 candles (user-configurable)
• Entry is triggered only if price CLOSES outside the BOIB range
✅ Long Signal
• Candle closes above BOIB high
✅ Short Signal
• Candle closes below BOIB low
If no breakout occurs within the window → setup expires automatically
⸻
🎯 Entry, Stop Loss & Take Profit Logic
Once a valid breakout/breakdown occurs, the indicator automatically draws a professional trade template:
Entry
• At the close of the breakout candle
Stop Loss
• Long → below BOIB low
• Short → above BOIB high
• Optional buffer:
• ATR-based
• Percentage-based
• Or none
Take Profits
• TP1: Risk-Reward based (default 1R)
• TP2: Extended target (default 2R)
All levels are clearly visualized using:
• Horizontal price lines
• Risk and reward boxes
• Informational labels
⸻
📊 Best Use Cases
• Crypto (BTC, ETH, major alts)
• Timeframes:
• Scalping: 5m
• Day trading: 15m / 30m
• Works best when combined with:
• Market structure
• Trend bias
• Support / resistance
⸻
⚠️ Important Notes
• This is NOT an auto-trading system
• Signals should always be used with:
• Proper risk management
• Market context
• Inside bars in sideways or low-volume markets may fail
⸻
📚 Educational Purpose Disclaimer
This indicator is provided for educational and analytical purposes only.
It does not constitute financial advice.
Trading involves risk, and past behavior does not guarantee future results.
Delta Microstructure AnalysisDelta Microstructure Analysis
Market microstructure analysis using footprint data for divergence, exhaustion, absorption, and trapped trader detection
Overview
Delta Microstructure Analysis is an order flow indicator that uses TradingView's footprint data to identify market conditions including divergences, exhaustion patterns, absorption zones, and trapped trader scenarios. The indicator calculates delta at each bar and tracks cumulative delta to identify potential reversals and continuations.
Key Features
Footprint Data Integration: Uses TradingView's built-in footprint data for accurate buy/sell volume delta calculation. Falls back to synthetic delta calculation when footprint data is unavailable.
Adaptive Tick Calculation: Automatically adjusts footprint tick size based on asset type and timeframe. Baseline values: crypto (200), forex (10), stocks (5), indices/futures (1), with timeframe scaling.
Cumulative Volume Delta (CVD): Tracks cumulative delta with reset options (None, Daily, Fixed Bars) to identify overall buying/selling pressure trends.
Divergence Detection: Identifies bullish and bearish divergences between price action and cumulative delta using configurable pivot strength (3-20 bars).
Exhaustion Pattern Recognition: Detects buying and selling exhaustion when delta exceeds configurable multiplier (2.0-10.0x) of average delta over lookback period (10-100 bars).
Absorption Zone Analysis: Identifies areas where aggressive orders are absorbed by resting liquidity, indicating potential support/resistance zones.
Trapped Trader Detection: Recognizes scenarios with strong initial momentum followed by sharp reversals, suggesting trapped positions.
Visual Labeling System: Displays signals as monospace labels (DIV↑/DIV↓, EXH↑/EXH↓, ABS↑/ABS↓, TRAP↑/TRAP↓) above/below candles.
Info Table Display: Shows current CVD, delta, average delta, data source, and active signals in a monospace-formatted table.
Alert System: Individual alerts for each signal type (divergences, exhaustion, absorption, trapped traders).
How It Works
Footprint Data Request: The indicator requests footprint data using adaptive tick sizing. If unavailable, uses synthetic delta calculation based on candle characteristics.
Delta Calculation: For footprint data, uses fp.delta() function. For synthetic delta, considers body size, wick analysis, and volume characteristics.
Cumulative Delta Tracking: Maintains running cumulative delta that resets based on selected mode (daily session changes or fixed bar intervals).
Pivot Detection: Uses configurable pivot strength to identify significant highs and lows in both price and cumulative delta.
Divergence Analysis: Compares price pivots with cumulative delta pivots. Bullish divergence: lower price lows with higher delta lows. Bearish divergence: higher price highs with lower delta highs.
Exhaustion Detection: Calculates average absolute delta over lookback period and identifies when current delta exceeds multiplier threshold.
Absorption Identification: Analyzes footprint patterns to detect when aggressive orders are met with sufficient resting liquidity.
Trapped Trader Recognition: Identifies strong momentum followed by sharp reversals using proprietary pattern recognition.
Signal Display: Shows signals as labels on chart and summarizes in info table with current market conditions.
Use Cases
Divergence Trading: Use divergence signals to identify potential trend reversals before they appear in price action.
Exhaustion Monitoring: Identify when buying or selling pressure may be exhausted, suggesting potential reversals.
Support/Resistance Levels: Use absorption zones to identify key price levels where institutional activity occurs.
Risk Management: Use trapped trader signals to anticipate sharp reversals and adjust position sizing.
Market Structure Analysis: Understand underlying order flow dynamics driving price movements.
Confirmation Tool: Combine with other technical indicators to confirm signals and improve trade probability.
Settings
Footprint Settings:
Use Footprint Data: Toggle between footprint and synthetic delta
Tick Size Mode: Auto (adaptive) or Manual tick sizing
Tick Density Multiplier: Adjusts price bucket size in footprint data
Manual Footprint Ticks: Custom tick size for Manual mode
CVD Settings:
CVD Reset Mode: None, Daily, or Fixed Bars
Reset Every N Bars: Number of bars between resets (10-1000)
Divergence Settings:
Pivot Strength: Bars required for pivot detection (3-20)
Show Divergence Lines: Toggle line display
Bullish/Bearish Divergence Color: Custom colors
Divergence Line Width: Line thickness (1-5)
Exhaustion Settings:
Delta Multiplier: Threshold multiplier (2.0-10.0)
Lookback for Avg Delta: Period for average calculation (10-100)
Show Exhaustion Markers: Toggle signal display
Display Options:
Show Info Table: Toggle table display
Table Position: Choose table location on chart
Table Styling:
Background, text, and border colors
Header styling options
Label Styling:
Label text color
Alert Settings:
Individual toggles for each signal type
Technical Notes
The indicator uses TradingView's footprint functions (request.footprint(), fp.delta()) for order flow analysis.
Adaptive tick calculation converts all timeframes to minutes for consistent scaling across chart intervals.
Synthetic delta calculation uses body size (70% weight), wick analysis, and body-to-range ratio for fallback when footprint data unavailable.
The indicator uses barstate.isconfirmed for calculations to prevent repainting.
All text displays use monospace font for consistent readability.
Table displays current CVD, delta, average delta, data source, and active signals in real-time.
Best Practices
Use on symbols where footprint data is available for most accurate analysis.
Combine divergence signals with price action for higher probability setups.
Monitor exhaustion signals in context of overall trend direction.
Pay attention to absorption zones at key technical levels.
Use trapped trader signals as early warning for potential reversals.
Adjust pivot strength based on trading timeframe (lower for shorter timeframes).
Consider data source indicator - synthetic delta may be less reliable than footprint data.
Set up alerts for preferred signal types when monitoring multiple symbols.
This indicator analyzes market microstructure using footprint data to identify divergences, exhaustion, absorption, and trapped trader patterns.
VaCs MLL V2Quick User Guide
S/R Levels: These are dynamic Support and Resistance lines. They represent "unmitigated" price levels. As soon as the price hits a line, it disappears to keep your chart clean.
BSL/SSL Zones: The red and green boxes represent Buy-Side Liquidity (Previous Day High) and Sell-Side Liquidity (Previous Day Low). These are magnet zones where the price often heads to hunt stop losses.
Leverage Calculator: The dashboard calculates the exact leverage you should use. If you set your "Risk Per Trade" to 5%, and the price hits the "Stop Loss Price," you will lose exactly 5% of your total capital.
Trend Status: Based on the Daily 30 EMA. If the background is Green (Bullish), look for long entries at S/R levels. If Red (Bearish), look for short entries.
StO Price Action - Engulfing TypesShort Summary
- Multi-timeframe engulfing level indicator
- Supports up to 2 independently configurable timeframes
- Visualizes engulfing-based levels instead of candles or symbols
- Multiple engulfing pattern types and strength variants selectable
- Designed for structural breakout, reaction, and retest analysis
Full Description
Overview
- Identifies and visualizes engulfing-based price levels
- Focuses on where significant engulfing events occurred
- Levels are extended visually to highlight potential reaction zones
- Intended for structural price action and level-based trading
Engulfing Types
- Two main engulfing structures are supported
- Each type supports multiple strength variants:
- Type 1-v1:
- Basic engulfing pattern
- Captures frequent market reactions
- Type 1-v2:
- Stronger move with extended confirmation
- Filters weaker engulfing cases
- Type 2-1CS:
- One candle separation before engulfing
- Indicates short-term buildup before expansion
- Type 2-2CS:
- Two candle separation before engulfing
- Indicates stronger accumulation or distribution
Timeframe Configuration
- Up to 2 timeframes configurable independently
- Each timeframe supports:
- Enable / disable visualization
- Timeframe selection from intraday to monthly
- Independent long and short colors
- Line style selection (solid, dashed, dotted)
- Adjustable level length for visual extension
Visualization
- Engulfing events are visualized as adjustable lines
- Levels represent the relevant price reference of the engulfing structure
- Designed to remain visible for retests and reactions
- Clean, non-intrusive visualization focused on structure
Usage
- Useful for identifying potential support and resistance derived from engulfing behavior
- Helps track where aggressive buying or selling entered the market
- Suitable for breakout, pullback and continuation analysis
- Works across multiple timeframes for confluence
Notes
- Level-based visualization only
- Effectiveness depends on selected engulfing types and timeframes
- Best used in combination with market structure or higher-timeframe context
StO Price Action - EngulfingShort Summary
- Multi-timeframe engulfing pattern visualizer
- Supports up to 5 independently configurable timeframes
- Simple or complex engulfing detection logic selectable
- Visual output via candles or ▲▼ markers
- Optional alerts per timeframe
- Designed for pattern-based price action analysis
Full Description
Overview
- Detects and visualizes bullish and bearish engulfing patterns
- Works across multiple selectable timeframes simultaneously
- Focuses on classical price action patterns
- Designed for discretionary and confirmation-based analysis
Engulfing Logic
- Two selectable detection modes:
- Simple:
- Based on classical open/close engulfing definition
- Lightweight and broadly applicable
- Complex:
- Extended conditions including high/low relationships
- Requires stronger price dominance and range expansion
- Filters weaker or marginal engulfing patterns
Timeframe Configuration
- Up to 5 timeframes configurable independently
- Each timeframe supports:
- Enable / disable visualization
- Timeframe selection (Chart to Monthly)
- Independent bull and bear coloring
- Enable / disable bullish and bearish detection
Visualization
- Two visualization modes per timeframe:
- Candle-based highlighting
- Symbol-based visualization using ▲▼
- Allows clean abstraction on lower timeframes
Alerts
- Optional alert activation per timeframe
- Alerts trigger on detected engulfing patterns
- Can be used for monitoring higher-timeframe structures
Usage
- Suitable for price action and pattern traders
- Useful for identifying potential reversal or continuation zones
- Works well as confirmation within market structure
Notes
- Pattern-based visualization only
- No trade execution or strategy logic
- Signal strength depends on selected algorithm and timeframe
- Recommended to use higher timeframes for stronger context
kk s9target 1 is rs 10 and stoploss 15points but always hit target if you have any doubts call : 9963782970, or email : kkraju5@gmail.com , 9966755535
www.youtube.com
Volume InsiderThis indicator shows you the percentage of buyers and sellers per candle on any time frame. Please go into the setting and change the color for buy and sell to whatever you would like.
First presented FVG ICT by @traderbinjFirst Presented FVG ICT by @tradebinj
This indicator identifies the first valid Fair Value Gap (FVG) that forms on the 1-minute (m1) timeframe after the market open (default 09:30 AM). It is designed for ICT concepts, helping traders spot the initial imbalance of the session while ignoring noise and weekend gaps.
Key Features:
Precision M1 Detection: Automatically calculates FVGs strictly on the 1-minute chart but displays them visible on any higher timeframe (5m, 15m, 1H, etc.).
Session & Timezone Control: Customizable start time (default 09:30) and end-of-day cutoff (16:00), with a timezone selector to support any asset class (Futures, Forex, Crypto).
Intelligent Filtering: Includes logic to ignore "New Week Opening Gaps" (weekend data) and strictly filters for the first setup of the session.
Visual Customization: Toggle between "Box" or "Lines Only" modes. Fully adjustable colors for Bullish/Bearish fills and borders.
History & Extension: Choose how many past FVGs to keep on the chart and optionally extend all active zones to the current price.
Smart Text: clearly labels the zone as "1st fvg" with customizable alignment.
Professional Price Action AnalysisProfessional Price Action Analysis - Advanced S/R & Pattern Detection
A comprehensive technical analysis tool combining dynamic support/resistance zones, candlestick pattern recognition, trend analysis, and volume insights.
KEY FEATURES:
✓ Dynamic Support & Resistance Zones
- Automatically identifies swing highs/lows
- Classifies levels based on current price position
- Support zones display BELOW price (green)
- Resistance zones display ABOVE price (red)
- Adjustable zone thickness and lookback period
✓ Candlestick Pattern Detection
- Bullish/Bearish Engulfing patterns
- Pin bars (reversal signals)
- Inside bars (consolidation)
- Rejection candles (wick analysis)
- Visual markers on chart with labels
✓ Trend Analysis
- Customizable moving average (default 50-period SMA)
- Background color zones for trend direction
- Price vs MA percentage calculation
- Bullish/Bearish/Neutral classification
✓ Volume Analysis
- Volume spike detection (configurable multiplier)
- Highlights unusual volume with bar colors
- Helps identify institutional activity
✓ Information Dashboard
- Clean, readable display (top-right corner)
- Current trend status
- Distance to nearest support/resistance
- Volume status (High/Normal)
- Price deviation from moving average
✓ Alert System
- Alerts for all candlestick patterns
- Volume spike notifications
- Customizable alert conditions
CUSTOMIZABLE INPUTS:
• Swing detection length (3-50 bars)
• S/R lookback period (20-200 bars)
• Zone thickness percentage
• Maximum zones displayed
• Trend MA length
• Volume spike multiplier
• Toggle individual pattern types
BEST FOR:
- Swing traders identifying key levels
- Day traders spotting reversal patterns
- Price action enthusiasts
- Multi-timeframe analysis
This indicator does not repaint. All signals are confirmed after candle close. Suitable for all markets: stocks, forex, crypto, commodities.
Educational tool for technical analysis. Not financial advice.
ULTIMATE Multi-TF Previous CloseULTIMATE Multi-TF Previous Close displays previous close levels across multiple timeframes in one simple, non-repainting indicator.
These levels often act as key decision points, providing natural support, resistance, and directional bias.
Ideal for day traders, swing traders, and scalpers who want higher-timeframe context without clutter.
Features include:
Yearly → 5-minute timeframe coverage
Right-extended horizontal levels
Optional labels with exact prices
Tick-accurate rounding
Designed for clarity. Built for precision.
MB-MACD## Description
**MB-MACD** is a custom Pine Script indicator designed to enhance momentum analysis by combining a volume-based "Main Buy Ratio" (MB) calculation with a traditional MACD oscillator. The MB Ratio estimates institutional buying pressure by apportioning volume based on the candle's range and close position, providing a unique proxy for "smart money" flow. This smoothed MB value is then used as the source for MACD computation, allowing for divergence detection between price action, the MB line, and the MACD Histogram.
Key features include:
- **MB Line**: A histogram-style plot showing smoothed buy/sell ratio, colored bullishly (teal) or bearishly (pink) based on direction.
- **MACD Histogram**: Standard MACD applied to the MB source, with optional smoothing.
- **Divergence Detection**: Identifies bullish and bearish divergences on both the MB line and MACD Histogram, with configurable filters for momentum decay and zero-line alignment.
- **Visualization Options**: Display divergence lines and labels in the indicator pane or synced as an overlay on the main chart for better context.
- **Alerts**: Triggers for bullish or bearish divergences to notify users of potential reversal setups.
This indicator is particularly useful for swing traders and momentum followers looking to spot hidden divergences that may signal trend reversals or continuations. It emphasizes risk management by highlighting where price and momentum decouple, but remember: divergences are probabilistic signals and should be confirmed with other tools.
As this is a community-shared script, I encourage users to test it thoroughly and provide feedback. If you spot any bugs, calculation errors, or improvements (e.g., edge cases with low-volume symbols or performance issues on certain timeframes), please comment below or reach out—your input helps refine it for everyone!
## User Manual
### Introduction
The **MB-MACD** indicator integrates volume analysis with MACD to detect divergences in price and momentum. The core innovation is the "Main Buy Ratio" (MB), which approximates buying vs. selling volume within each bar based on its range and close position. This MB value is smoothed and fed into a MACD calculation, enabling divergence scans on both the MB line and the resulting MACD Histogram.
Divergences occur when price makes higher highs/lower lows, but the oscillator (MB or Histogram) fails to confirm—often signaling potential reversals. The script offers flexible display options, filters to reduce false positives, and alerts for real-time notifications.
**Important Notes:**
- This is not financial advice; use it for educational purposes and backtest on your symbols/timeframes.
- Works best on liquid stocks or indices with reliable volume data (e.g., daily or higher timeframes).
- Performance may vary on low-volume assets or during after-hours trading.
- If you encounter issues (e.g., no divergences detected or rendering errors), check your chart settings and report them in the comments for community debugging.
### Inputs Explanation
The inputs are grouped for ease of configuration. Adjust them via the indicator's settings panel in TradingView.
#### Core Parameters
- **Show MB Line** (Default: True): Enables/disables the MB Ratio histogram plot.
- **Show MACD Histogram** (Default: True): Enables/disables the MACD line and histogram plots.
- **MB Smoothing (SMA)** (Default: 10, Min: 1): Length for smoothing the raw MB Ratio using a Simple Moving Average (SMA). Higher values reduce noise but may lag.
- **Pivot Lookback Length** (Default: 5, Min: 2): Bars to look back/forward for detecting price pivots (highs/lows) used in divergence logic.
- **Max Lines Kept** (Default: 100, Min: 10): Limits the number of divergence lines/labels to prevent chart clutter.
#### Display Settings
- **Show Lines (Indicator Pane)** (Default: True): Draws divergence lines on the MB line in the indicator pane.
- **Show Labels (Indicator Pane)** (Default: True): Adds labels (e.g., "L" for line divergence) at divergence points in the pane.
- **Show Hist Divergence Lines** (Default: True): Draws dashed lines for MACD Histogram divergences in the pane.
- **Show Hist Divergence Labels** (Default: True): Adds labels (e.g., "H" for histogram divergence) in the pane.
- **Sync Lines to Main Chart (Overlay)** (Default: True): Mirrors divergence lines and labels onto the main price chart for context (slightly offset for visibility).
#### Filters & Tolerance
- **Peak Alignment Tolerance (Bars)** (Default: 5, Min: 0): Allows flexibility in matching oscillator peaks/valleys to price pivots (e.g., within ±5 bars).
- **Max Divergence Distance (Bars)** (Default: 20, Min: 5): Maximum bars between two pivots for a valid divergence; prevents detecting overly distant signals.
- **Enable Momentum Decay Filter** (Default: True): For Histogram divergences, requires the current peak/valley to have a smaller absolute value than the previous (indicating convergence/decay).
- **Enable Zero-Side Filter** (Default: False): Ensures both peaks/valleys in a divergence are on the same side of the zero line (e.g., both positive or both negative).
#### MACD Settings
- **MACD Fast Length** (Default: 12): Fast EMA length for MACD.
- **MACD Slow Length** (Default: 26): Slow EMA length for MACD.
- **MACD Signal Length** (Default: 9): Smoothing length for the MACD signal line.
- **MACD Source Smoothing** (Default: 3, Min: 1): Additional SMA smoothing applied to the MB Ratio before MACD calculation.
### How It Works
1. **MB Ratio Calculation**: For each bar, the script computes the position of the close within the high-low range (0-1). This scales the volume into "buy" and "sell" portions, then derives a net ratio (-100% to +100%). It's smoothed via SMA for the final MB line.
2. **MACD Application**: The (optionally smoothed) raw MB is used as the MACD source, producing a MACD line, signal line, and histogram.
3. **Pivot Detection**: Uses Pine's `ta.pivothigh`/`ta.pivotlow` to find price highs/lows over the lookback period.
4. **Divergence Scanning**:
- **Bearish (on Highs)**: Price makes a higher high, but MB/Hist makes a lower high.
- **Bullish (on Lows)**: Price makes a lower low, but MB/Hist makes a higher low (closer to zero).
- Scans nearby bars for oscillator matches and applies filters.
5. **Rendering**: Lines/labels are drawn in the indicator pane or overlaid on the chart. Colors: Teal for bullish, Pink/Maroon for bearish.
6. **Cleanup**: Automatically removes old lines/labels to stay under the max limit.
### Interpreting the Outputs
- **MB Line (Columns)**: Positive (teal) indicates net buying pressure; negative (pink) shows selling. Watch for crossovers above/below zero as momentum shifts.
- **MACD Histogram (Area)**: Green/teal for positive momentum; red/maroon for negative. Widening bars suggest strengthening trends; narrowing indicates weakening.
- **Divergence Lines/Labels**:
- Solid lines: MB line divergences (thicker, labeled "L").
- Dashed lines: Histogram divergences (thinner, labeled "H").
- Bullish: Teal lines sloping up (potential bottom reversal).
- Bearish: Pink lines sloping down (potential top reversal).
- **Overlay on Chart**: Lines connect price pivots (or offset slightly for Histogram). Use this to visualize how divergences align with candlesticks.
- **Zero Line**: Gray horizontal line; divergences filtered by side if enabled.
**Example Usage**:
- On a daily stock chart, enable overlays and watch for a bullish "L" or "H" label near a price low—could signal a buy if confirmed by volume breakout.
- In a downtrend, bearish divergences on highs might warn of further downside.
### Alerts
- **Bullish Divergence (L or H)**: Triggers on any detected bullish divergence (MB or Histogram).
- **Bearish Divergence (L or H)**: Triggers on bearish divergences.
- Set up via TradingView's alert menu: Select the indicator, choose the condition, and customize the message (e.g., includes ticker).
### Troubleshooting / Known Issues
- **No Divergences Shown**: Increase "Peak Alignment Tolerance" or reduce filters. Ensure pivot length suits your timeframe (shorter for intraday).
- **Too Many Lines/Labels**: Lower "Max Lines Kept" or increase "Max Divergence Distance" to filter distant signals.
- **Performance on Low-Volume Symbols**: MB Ratio may be unreliable; test on high-volume assets first.
- **Rendering Errors**: If lines don't appear, check chart zoom or ensure "force_overlay=true" isn't conflicting with other indicators.
- **NaN/Undefined Values**: Rare on live data but possible in historical backtests; report with symbol/timeframe for fixes.
### Feedback and Contributions
This script is open for community improvement! If you find bugs (e.g., false positives in divergences, calculation edge cases, or UI glitches), or have suggestions (like additional filters or visualizations), please share in the comments. Your feedback helps make it better—let's debug and enhance it together!
NY Open | Opening Drive | Close UTC Open (15m)📝 Indicator Description
This indicator highlights key institutional market timing levels on a 15-minute chart, using New York session time for precision.
It visually marks and colors candles for the most important intraday moments used by active traders:
🔹 Features
NY Open (9:30 AM ET)
- Identifies the official U.S. market open.
Opening Drive Entry (9:45 AM ET)
- Marks the end of the opening volatility window and potential directional confirmation.
NY Close (4:00 PM ET)
- Highlights the U.S. equity market close.
UTC Daily Open (7:00 PM ET / 00:00 UTC)
- Marks the start of the new UTC trading day and colors the candle teal for easy recognition.
🎯 Designed For
- Crypto traders
- Index & futures traders
- Intraday and session-based strategies
- Traders who use time-based entries and session structure
⚙️ Notes
- Built specifically for the 15-minute timeframe
- Automatically adjusts for New York daylight savings
- Works on all markets that trade through the NY session
JATAYU Institutional Vision Engine# JA-VIEW
JATAYU – Institutional Vision Engine
A single-symbol intraday market intelligence dashboard that displays:
• Daily range exhaustion (DATR)
• Activity insights
• 5m & 15m trend structure with strength
Built to help traders observe whether a stock shows expansion potential or exhaustion through objective data visualization.
JA-VIEW is an analysis and observation tool only.
It does not provide buy/sell calls or financial advice.
Access: Invite Only
Instagram: @kraftoncharts
www.instagram.com
For requesting access to JATAYU – Market Vision Engine. Please DM me on Instagram: @kraftoncharts instagram.com/kraftoncharts?igsh=d with your TradingView username and reason for access. This is a private tool shared selectively.
A Humbled Trader Strategy + ChecklistHumbled Trader Swing Strategy + Checklist
This indicator is a complete swing trading system based on the high-probability strategies popularized by Humbled Trader. It is designed to help traders identify trend breakouts and low-risk momentum pullbacks on the Daily Timeframe.
The script combines trend filtering, automated resistance lines, and specific entry triggers into a single chart overlay, complete with a real-time Strategy Checklist Dashboard to confirm your setups instantly.
🎯 Core Components
Trend Filter (Purple Line): The 200 Simple Moving Average (SMA). This acts as your long-term trend filter. We only look for long trades when the price is above this line.
Momentum Guide (Orange Line): The 8 Exponential Moving Average (EMA). This tracks short-term momentum. In a strong trend, price will "ride" this line. We look to enter when price pulls back to touch this area.
Multi-Month Resistance (Orange Horizontal Line): Automatically plots the highest price over the last X Months (adjustable). This helps you instantly visualize the key level the stock needs to break out from.
Checklist Dashboard: A real-time table that evaluates Trend, Resistance, and Momentum conditions to give you a clear "✅ ENTER", "🚀 GAP UP", or "⏳ WAIT" signal.
🛠 How It Works
This indicator scans for two specific setups:
1. The Daily Gap Up ("GAP" Label) This signal appears when a stock shows strong momentum by gapping up overnight.
Condition: The stock opens at least 3% higher (adjustable) than the previous day's Close AND opens above the previous day's High.
Trend: Must be above the 200 SMA.
Visual: Marked with a green "GAP" label on the chart.
2. The Trend Pullback ("ENTER" Signal) This is a trend-following entry that lets you join an existing move with lower risk.
Condition: The stock is in an uptrend but dips down to touch or test the 8 EMA.
Validation: The candle must show a "dip" (red candle or lower close) to ensure we are buying a pullback, not chasing a top.
Visual: The Dashboard "Action Signal" will turn orange and display "✅ ENTER".
📋 The Checklist Dashboard
Located in the corner of your chart, this table provides a live status report for the current bar:
Trend (> 200 SMA):
🟢 Bullish: Price is in an uptrend. Safe to look for entries.
🔴 Bearish: Price is below the 200 SMA. Stay away.
Above Resistance?:
🟢 Breakout: Price has cleared the multi-month resistance line.
⚪ ---: Price is currently below the key breakout level.
Near 8 EMA?:
🟢 Yes: Price is near the "value zone" (8 EMA) for a potential pullback entry.
Action Signal:
🚀 GAP UP: Strong momentum gap detected.
✅ ENTER: Valid pullback entry detected.
⏳ WAIT: No clear setup found.
⚙️ Settings
Momentum EMA Length: Default is 8. Controls the sensitivity of the pullback line.
Trend SMA Length: Default is 200. The standard for long-term trend filtering.
Gap Up % Threshold: Default is 3.0%. Minimum overnight gap size required to trigger a signal.
Resistance Lookback (Months): Default is 3. The script will look back this many months to find and draw the key resistance line.
Table Position: Move the checklist to any corner of your screen.
⚠️ Disclaimer
This tool is for educational purposes only and does not constitute financial advice. Always manage your risk and use a stop loss.
Engulfing Candlestick ScannerThis Indicator is used to Identify Engulfing Candles. It work on any timeframe.
Toby Crabel's HisVolAs in Linda Raschke's Street smarts..... . This indicator shows the signals of Toby Crabel's Historical Volatility 6/100 strategy. The strategy assumes, that volatility contraction measured by two measures would give better results.
There is one other script that is a strategy , but it assumes that the signal requires both inside bar and narrowest range, what is not as in Linda Raschke's.
The strategy and what does the script do:
1) measures short-term unannualized volatility (by default six), long term uannualized volatility (by default 100), and measures the ratio of short volatility / long volatility.
2) checks if the current bar is an inside bar or has narrowest range out of last X bar (by default 4), or both,
3) puts an etiquette if short volatility / long volatility is equal to or smaller than 0,5 AND the day is inside bar, has narrowest range, or both.
Next day both buy-stop and sell-stop should be set. Buy-stop at the high and sell-stop at the low of the bar with etiquette.
This is by no means any financial advice, nor the historical results guarantee future gain.
