เริ่มกันเลย

Bitmex

MKAST V2 (lifetime)PLEASE READ THE ENTIRE POST BEFORE PURCHASING & USING THE MKAST Algorithm. Saves you and me some time in emails and messages. :) This is the NEW LIFETIME ACCESS Version of the MKAST The MKAST Buy Sell Algorithm is a very specific strategy, cut down to its roots and made perfect for the volatile crypto market.
 Many Algorithms focus only on one aspect, one side, one specific rule.
 As you know, this is not how life, the market or anything else works.
 MKAST combines many different aspects at the same time, scans multiple other Algorithms and comes to a conclusion based on over 1350 lines of code. It is based on Divergences, Elliott Waves, Ichimoku, MACD, MACD Histogram, RSI, Stoch, CCI, Momentum, OBV, DIOSC, VWMACD, CMF and multiple EMAs.
 Every single aspect is weighted into the decision before giving out an indication. Most buy/sell Algorithms FAIL because they try to apply the same strategy to every single chart, which are as individual as humans.
 To conquer this problem, MKAST has a wide range of settings and variables which can be easily modified. To make it a true strategy, MKAST has as well settings for Take Profit Points, Multiple Entries and Stop Losses. Everything with an Alert Feature of course. I know from experience that many people take one Algorithm and are simply too LAZY to add multiple Algorithms to make a rational choice. 
 The result of that is that they lose money, by following blatantly only one Algorithm. MKAST has additional 9 Indicators, perfect for the crypto market, which can be turned on and off. Manual MKAST Signals Settings “Show Signals?” - On/Off to show the Buy/Sell Signals.
 “Aggressiveness” - Increase to make the signals less aggressive and decrease to make them more aggressive. “Show Custom Signals?” - On/Off to show custom MKAST Signals as chosen in the settings below. “Custom Buy/Sell Aggressiveness” - Choose a custom Aggressiveness for each buy and sell signal individually. “TJ-Index Requirement For Buy/Sell” - If the TJ-Index is below the given number, it will show the signal in grey, this also applies for normal signals. Buy 0 and Sell 15 shows all signals in their original colour again.
 “Don’t show signals that don’t meet index requirement?” - Checked, it will completely not show signals which would be “grey” as in the explanation above. “Change Backgroundcolour if index is at 15 or 0?” - Checked, changes the colour of the chart if the index is at 15 or 0 points MKAST Panel Settings “Show Info Panel?” - Shows Info Panel on the chart.
 “Move Info Panel UP by %” - Moves Info Panel up/down. “Move Info Panel Left/Right ” - Moves Info Panel Left/Right.
 “Show BitMEX Panel?” - Shows BitMEX Panel on the chart. “Move BitMEX Panel by % ” - Moves BitMEX Panel up/down.
 “Move BitMEX Panel Left/Right” - Moves BitMEX Panel Left/Right. “Signal Source” - Choose source of candle open/close for Equity calculation.
 “Leverage Used?” - Select the used Leverage for your strategy and Equity calculation. “Fees Per Trade in % ” - Deducts these fees after each trade from Equity calculation.
 “Round Current Profit Price?” - Rounds the number on the Panel. “Trading Periods ” - Choose a trading Period which will be used to calculate Period Equity.
 “Show separations of each Trading Period?” - Show separations on the chart of each Trading Period. The very new feature on Tradingview and obviously now as well on MKAST are Information Panels. I have chosen to add an Info Panel and a BitMEX Price Panel into MKAST, to make live and even backtesting easier. With only one blink of an eye the user is able to see ALL relevant information, without having to go through various ways of checking and using other tools. The Info Panel:
 The first row shows the current profit. This is calculated since the signal initiation and the current candle close. Followed by a single number, which represents the current TJ-Index, removing the need of having to add the actual TJ-Index Oscillator on the chart.
 
 The second row shows the current position and its status. This was added on request of many users wanting to know if their position is “about to change” or not. The status shows the users if the position is “endangered” or “okay”.
 
 Followed by the “backtesting tool” already included inside the Panel. No need for complex oscillators with a hard reading for backtesting. With this one and simple panel, you see the Period Equity for the period chosen previously in the settings. This calculates all profits made inside that period and re-sets when the period ends. Right next to it, the Total Equity calculating ALL profits since the beginning of the chart.
 
 Right below, you see the information about the last long and short position which have been open. This helps with the evaluation and documentation of the last trade.
 The BitMEX Panel:
 A convenient panel which shows all BitMEX contracts and their LIVE prices. The need for opening each chart goes away, the quality and experience of trading increases. MKAST custom Signals are one of the notorious possibilities for ADVANCED strategies with MKAST.
 Users who requested these features and use them frequently are the ones, having already a very unique trading strategy and they use these very custom signals as confluence or for multiple entry trades. These custom signals and their settings can be mostly ignored by the majority of traders who are using this Algorithm. The idea behind the grey signals has its roots in the idea of the TJ-Index. The TJ-Index being 15 Algorithms and conditions possible showing a bullish or bearish interpretation. The index counts the Algorithms which are showing a bullish interpretation. Like that we can make sure that signals are shown in the original colour, are only those who have an additional confluence with the TJ-Index, not letting the user buy, if at least the majority is not bullish, and not letting the user sell, if at least the majority is bearish. The custom buy and sell aggressiveness lets the user customise the MKAST algorithm even more.
 Either the users wants to see how signals are changing on a different (slightly lower or higher) aggressiveness, being able to expect a change on their own settings. OR seeing that some signals of the same sort are a little out of place and is able to move these to a different aggressiveness, increasing the profitability even more.
 Needless to say, custom signals are NOT a part of the Info Panel. MKAST Label & Trendline Settings “Show Labels?” - On/Off to show Labels above each signal, with the percentage gain or loss, calculated from the last signal to the new signal.
 “Show Trendlines?” - On/Off to show automatic Trendlines following Gainzy Lines. “Lookback Length” - Choose a length that the automatic trendiness use for calculation. Comparable to Aggressiveness. “Wicks//Bodies” - Change between trendiness connecting from wick to wick or from body to body. “Black lines// Coloured lines” - Change between simply black lines or changing colour lines.
 “Filter Trendlines?” - On/Off to show all trendiness or just resistance decreasing and support increasing ones. “Limit Extensions Of The Lines?” - This value increases by how much the trendiness are being extended. 0 = endless extension, otherwise 100 = maximum custom extension.MKAST Strategy “Take Profit 1” - On/Off to show TP1 points.
 “Take Profit After %” - Set the percentage after which TP1 is active. “Take Profit 2 ” - On/Off to show TP2 points.
 “Take Profit 2 After %” - Set the percentage after which TP1 is active. “Take Profit 3” - On/Off to show TP3 points.
 “Take Profit 3 After %” - Set the percentage after which TP1 is active. “Second Entry” - On/Off to show Second Entry points.
 “Second Entry After %” - Set the percentage after which Second Entry is active. “Third Entry” - On/Off to show Third Entry points.
 “Third Entry After %” - Set the percentage after which Third Entry is active. “Stop Loss” - On/Off to show Stop Loss points.
 “Stop Loss After %” - Set the percentage after which Stop Loss is active. MKAST Strategy To make the life of the MKAST user even easier, I have added all adjustable Take Profit Points, Multiple entry points and Stop Loss points. I have never seen a sustainable and reliable trading strategy without TPs, Multiple entry and especially without a stop loss. Everything in the usual and fully customisable MKAST style. Simply choose how many Take Profit points you would like to have and choose the percentage after which you would like to see the Take Profit point appear on the chart and notify you to take profits. Are you a Trader who likes Multiple Entries? Also no problem with MKAST. Select how many additional entries you would like to have and after how many percent you would like them to appear on the chart and remind you of adding to the position. What would a Strategy be without a Stop Loss? Same settings apply here as on the TPs and MEs. All of the settings are able to take fractions of a number as well. This enables users to even use all of the strategy settings for scalping or FX pairs, where high leverage and the smallest of moves are used for trading. Needless to say, all of these settings work on RENKO and Heikin Ashi as well. These might need adjustment, since the calculation is different, yet there is nothing standing in the way of it anymore. Crypto Modified Indicators “Show Divergences?” - On/Off to show Divergences on the Chart based on the data of 10 different Algorithms.
 “Show Oversold/bought?” - On/Off to change the colour of the chart in Oversold/bought conditions. “Oversold/bought value?” - Choose a value for which the chart is Oversold/bought.
 “Show Fibonacci Levels?” - On/Off to show automatic Fibonacci Levels. “Fibonacci Lookback Lenght” - This value states how many candles from right now are taken into account to paint the Fibonacci Levels. “Fibonacci Custom Period” - Choose a custom Timeframe that should be used to paint the Fibonacci Levels.
 “2nd-7th Fibonacci Level” - Enter a value for the Fibonacci Levels you would like to use and see on the chart.
 “Plot 1.618 Level?” - On/Off for the Fibonacci extension level. Crypto Modified Indicators “Show Bands?” - On/Off to show the TJ-Bands on the chart.
 “Bands Length” - Choose a value for the TJ-Bands Lenght
 “Show Show EMA 1-3?” - On/Off to show the EMAs 1-3 on the chart.
 “EMA Lenght 1-3” - Choose a value for the first to third EMA Lenght “Show Ichimoku? ” - On/Off to show Ichimoku on the chart.
 “Show Tenkin?” - On/Off to show Tenkin on the chart. “Tenkin” - Set the lenght of the Tenkin.
 “Show Kijun?” - On/Off to show Kijun on the chart. “Kijun” - Set the lenght of the Kijun.
 “Show Senkou?” - On/Off to show the Senkou on the chart. “Senkou” - Set the lenght of the Senkou.
 “Displacement” - Set the value of the Displacement. “Show Chikou Span?” - On/Off to show the Chikou Span on the chart. Crypto Custom Indicators In the picture above, you see the first pair of Crypto Custom Indicators. The oversold and overbought conditions are highlighted.
 Bullish and Bearish divergences are also plotted on the chart. This is personally my favourite combination of Indicators and MKAST settings. It shows nicely everything one needs to know and makes it easier to decide wether to follow a signal or not. We here as well a perfect example of the Automatic Fibonacci Lines (Lookback 50, Timeframe 1D).
 It shows all significant levels, which we can see being respected. Orange = 23.6%, Green = 38.2%, Red = 50%, Yellow = 61.8%, Blue = 78.6%, White = 0%;100% In this picture above, we observe the perfect ensemble of MKAST and an EMA strategy, especially modified for crypto markets. Here, as by default, we have the EMAs at 21, 90 and 200. These have shown to be very significant moving support and resistance points in the crypto market. In this picture above, I lowered the timeframe to show the highly significant levels of the Ichimoku. It has not the “usual values”. These here have been modified for the volatile crypto market and set as default. An incredibly powerful tool for anyone who is ready to step up their trading game. It is a huge part of the MKAST back end and the strategy behind it. MKAST Custom Alerts 1 MKAST without any doubt has Custom Alerts for all Signals that it is painting on the chart. One can even choose to receive custom notifications for Take Profit points, Multiple Entry points and the Stop Loss points. The signals appear on the chart DURING the candle, not at the end of the candle. Therefore, the alerts do this as well. These appear during the candle. Here we can see all of the possible Alerts that can be chosen to be displayed. In total it is 14 different custom alerts, based on what the trader is looking for and how he is trading. Personally, I have 10-15 coins that I trade the most and for these I have custom notifications, mostly though only the MKAST Buy/Sell and Stop Loss Signals. To activate Alerts for MKAST, 
 1) Go to the “ALERT” icon on the top tool bar of your Tradingview.
 2) Select “CONDITION” as “—MKAST—“
 3) Then choose ONE condition from the list of conditions.
 4) On “OPTIONS” you can set how many times it appears, I have “Once per Bar”.
 4.1) If you want to make sure that the signal is truly there and not just a condition for a second during the candle, choose “ONCE PER BAR CLOSE”.
 5) “Expiration Time” sets the time until the alert expires. PRO users have no expiration for alerts.
 6) “Alert Actions” give you a row of choices what happens and how you want to be notified.
 7) “Message” is the message that you receive inside the notification. Thank you, Kong
อินดิเคเตอร์ Pine Script™
โดย KongTrading
4
Bitmex Funding Estimate with Moving AverageThis will show an estimate of the Bitmex Funding Rate and also a moving average of the rate. The moving average will be most accurate on the 8 hour chart as funding is paid every 8 hours. Values are NOT official, but can be helpful for sentiment. The Moving Average helps reflect that one or two funding changes do NOT result in a reversal. In a bull trend, funding often does not fully favor shorts until near the middle of the trend.
อินดิเคเตอร์ Pine Script™
โดย ThePuma
3
Altsignals-Running EquityThis is a backtested for the running equity for our Altsignals Indicator PRO+ and SLIM+. It shows you the performance of each trade, shows you periodical equity, resets the equity after each period to 0, shows histograms after each trade. This is an easy visual tool following Gainzys style to see how the algorithm performed previously and which settings might be the most or more profitable ones in the near future. The source of calculation to choose a value between one and close. Added to show LONG ONLY and SHORT ONLY Equity for LONG ONLY or SHORT ONLY strategies. Best regards, Altsignals
อินดิเคเตอร์ Pine Script™
โดย Altsignals
BitMex Liquidation & Bankruptcy PlotsThis script was created for the Bull Bear Bots community to help users manage their risk with respect to avoiding the dreaded liquidation emails from BitMex. Colour legend: Dark Green - Liquidation point for Longs Light Green - Bankruptcy point for Longs Dark Red - Liquidation point for Shorts Light Red - Bankruptcy point for Shorts Disclaimer: As BitMex do not publish the exact calculations for liquidation, this should be used as an approximation only as the results are slightly offset to what the official calculator provides. This issue is not unique to this script and if you cross-check all the other online calculators with the official one, you will find the same issue.
อินดิเคเตอร์ Pine Script™
โดย UnknownUnicorn2092536
HENKO (Renko + HeikinAshi) -- No RepaintThis particular work is completely mine. I have not used anyone else's code (not even a fragment). Parts of the code are used from Open Source library linking to www.investopedia.com and TradingView's example section at www.tradingview.com The above sources have been used to get Custom Heikin Ashi Candles. Calculations on Renko bars is completely on me as I have used Daily close and open values to build my own Renko Candles. Custom Bricksize for Float values has been made available in this public version. I take no responsibility for the performance of this indicator as I have completely turned off the Repainting in this version of my script. I am publishing the script for Public use. I'll be releasing updates for this script in future as the performance is somewhat acceptable. Profit Factor will decrease with bigger backtest data. NO REPAINTING issues shall be reported at all costs as the tradingview's default Time based renko has been completely discarded, thus making it rely on its own. Be advised that as the Renko Bars are calculated at 00:00 UTC, you're not supposed to mess with the timing in the script, unless you're working with Stock markets where it is important that you set your day start and end precisely. You can play with the Brick Size to see what's more beneficial for you. No Repaint RENKO NOTE:= PERFORMANCE OF THIS INDICATOR DEPENDS UPON THE BRICKSIZE OF RENKO BARS.
กลยุทธ์ Pine Script™
โดย puneetghai
18
Bitmex BTC Backwardation / ContangoThis indicator calculates difference between price of Bitmex's XBTUSD, and Bitmex's two nearest futures. If the difference is negative, then it is backwardation. If the difference is positive, then it is contango. This script will be updated every about 3 months, when the nearest Bitmex future will be expired. This is an updated script of , with better description.
อินดิเคเตอร์ Pine Script™
โดย RedAndBlue
13
[astropark - Premium] 1m Renko Scalper V2 [alarms]Dear Followers, today a new Scalper Tool , which works great on 1 minute timeframe , which is the best and more secure timeframe to use on a Renko chart, besides it works great up to 15m (I don't suggest to use a renko chart over 15m timeframe)! It is an upgraded version of Bitmex Renko Scalper that you can find in my tradingview script page. This tool has some cool features: it works on 1 minute timeframe : so you can enjoy high-frequency trading by using a 24/7 running bot; wait bricks optional mode : you may like to make script wait for triggering a new signal by waiting 1 or 2 more confirmation bricks trailing stop : you can set a trailing stop in trade, so script will alert you if it will be reached in chart This strategy can trigger till 5 buy or 5 sell signals in a row before reverting, so use a proper money management . Strategy results are calculated on the timeframe from july to now, so on about 4 months, using 10000$ as initial capital and working at 3x leverage (very safe leverage!). The user who wants to use this strategy, especially via an automated bot, must always set a stoploss at 5% from entry point or use a proper risk management strategy . This is not the "Holy Grail", so use it with caution. This script will let you set all notifications you may need in order to be alerted on each triggered signals. The backtesting script version of this indicator, which will let you backtest this script and find best settings for your preferred market, can be found here below: On Bitmex XBTUSD chart best settings is Traditional Renko chart with 10$ box size. This is a premium indicator , so send me a private message in order to get access to this script .
อินดิเคเตอร์ Pine Script™
โดย astropark
8
[astropark - Premium] 1m Renko Scalper V2 [strategy]Dear Followers, today a new Scalper Tool , which works great on 1 minute timeframe , which is the best and more secure timeframe to use on a Renko chart, besides it works great up to 15m (I don't suggest to use a renko chart over 15m timeframe)! It is an upgraded version of Bitmex Renko Scalper that you can find in my tradingview script page. This tool has some cool features: it works on 1 minute timeframe : so you can enjoy high-frequency trading by using a 24/7 running bot; wait bricks optional mode : you may like to make script wait for triggering a new signal by waiting 1 or 2 more confirmation bricks trailing stop : you can set a trailing stop in trade, so script will alert you if it will be reached in chart This strategy can trigger till 5 buy or 5 sell signals in a row before reverting, so use a proper money management . Strategy results are calculated on the timeframe from july to now, so on about 4 months, using 10000$ as initial capital and working at 3x leverage (very safe leverage!). The user who wants to use this strategy, especially via an automated bot, must always set a stoploss at 5% from entry point or use a proper risk management strategy . This is not the "Holy Grail", so use it with caution. This script will let you backtest this script and find best settings for your preferred market. On Bitmex XBTUSD chart best settings is Traditional Renko chart with 10$ box size. The alarms version of this indicator, which will let you set all notifications you may need in order to be alerted on each triggered signals, can be found by searching for "1m Renko Scalper V2". This is a premium indicator , so send me a private message in order to get access to this script .
กลยุทธ์ Pine Script™
โดย astropark
28
[Aill3urs V.0.4] Strategy Albert - EMA / Level / S&R/ WilliamThis INVIT-ONLY strategy is based on EMA / William / Level / Support & Resistance / Trends and work on low timeframe < 5min NOTE: you can add this strategy to your chart and you should test different timeframe Please use comment section for any feedback. I have also a study with alarms Long Entry / Long Exit / Short Entry / Short Exit For any question DM me for any request.
กลยุทธ์ Pine Script™
โดย Aill3urs
MKAST-IndexThis is one of my free for all Indicators. The TJ-Index is something I have been working on for quite a while and always was wanting to have on my charts, yet it took me longer than expected to finally finish it. Now it is done and you can simply favourite this script and add it to your chart. It is made out of 2 main parts. Part 1: 15 Indicators and conditions like -Delta MACD, -Crypto Indicator, -RSI, -MACD, -Momentum, -CCI, -OBV, -Stochastic, -CMF, -Raw Buy and Sell Volume Domination, -Super Guppy, -Ichimoku, -DIOSC, -Volume Weighted MACD, -Golden cross/Death Cross Part 2: The white line - the index itself. So how this works is, you see 15 horizontal lines in green and red alternating, mentioned in that order above, if a bullish condition islet the horizontal line turn green, if it is a bearish condition, it is red. The white index line, is basically depicting the number of bullish conditions at the same time. I have seen that it is extremely powerful for divergences and especially thinking to take any position, checking if the index is high or low at the time. An extra feature is that if ALL bullish or bearish conditions are met, the background of the oscillator will color itself green or red. You can also turn on and off the horizontal lines for the easier user of the TJ-Index. For now, the code will remain hidden, since I still have some important parts of this Index in my main Invite Only Indicator. I will be publishing an open version of the TJ-Index soy ou can incorporate it in your own indicators. Should you be interested in my main indicator or scripting work, feel free to DM me.
อินดิเคเตอร์ Pine Script™
โดย KongTrading
2
Crypto FOMO Strategy (monthly-access)PLEASE READ THE ENTIRE POST BEFORE PURCHASING & USING THE FOMO INDICATOR. Saves you and me some time in emails and messages. :) This is the NEW MONTHLY ACCESS Version of the Crypto FOMO Strategy Please check the links at the bottom of this post, so you find the way to our shop. 1 Month access is set at $25 10% Disount --> "FOMO25" Any question, DM me here or on Twitter , check for link on the bottom. The FOMO Buy Sell Indicator is a very specific strategy, cut down to its roots and made perfect for the volatile crypto market. Many indicators focus only on one aspect, one side, one specific rule. As you know, this is not how life, the market or anything else works. FOMO combines many different aspects at the same time, scans multiple other indicators and comes to a conclusion based on over 950 lines of code. It is based on Divergences, Elliott Waves , Ichimoku , MACD , MACD Histogram, RSI , Stoch , CCI , Momentum, OBV, DIOSC, VWMACD, CMF and multiple EMAs. Every single aspect is weighted into the decision before giving out an indication. Most buy/sell indicators FAIL because they try to apply the same strategy to every single chart, which are as individual as humans. To conquer this problem, FOMO has a wide range of settings and variables which can be easily modified. To make it a true strategy, FOMO has as well settings for Take Profit Points, Multiple Entries and Stop Losses. Everything with an Alert Feature of course. I know from experience that many people take one indicator and are simply too LAZY to add multiple indicators to make a rational choice. The result of that is that they lose money, by following blatantly only one indicator. FOMO has additional 7 indicators, perfect for the crypto market, which can be turned on and off. FOMO Signals Settings “Show Signals?” - On/Off to show the Buy/Sell Signals. “Aggressiveness” - Increase to make the signals less aggressive and decrease to make them more aggressive. “Show Custom FOMO Timeframe?” - On/Off to show FOMO Signals of a different timeframe in addition to the normal ones. “Custom FOMO Timeframe?” - Choose the timeframe for the custom FOMO signals. “Use Safe FOMO?” - On/Off to show only “safe” (less but more exact) FOMO signals. “Safe FOMO Sells” - Settings for the “safe” FOMO Sell Signals. Decrease number for “less safe” Signals. Increase number for “more safe” Signals. “Safe FOMO Buys” - Settings for the “safe” FOMO Buy Signals. Decrease number for “more safe” Signals. Increase number for “less safe” Signals. FOMO Strategy Settings “Take Profit 1 ” - On/Off to show TP1 points. “Take Profit After %” - Set the percentage after which TP1 is active. “Take Profit 2 ” - On/Off to show TP2 points. “Take Profit 2 After %” - Set the percentage after which TP2 is active. “Take Profit 3 ” - On/Off to show TP3 points. “Take Profit 3 After %” - Set the percentage after which TP3 is active. “Second Entry” - On/Off to show Second Entry points. “Second Entry After %” - Set the percentage after which Second Entry is active. “Third Entry ” - On/Off to Third Entry points. “Third Entry After %” - Set the percentage after which Third Entry is active. “Stop Loss ” - On/Off to show Stop Loss points. “Take Profit After %” - Set the percentage after which Stop Loss is active. The FOMO Lifeguard is a special feature made to cancel out the “noice” of the signals and show only signals with a great technical significance. For this FOMO uses the default settings of +7 and - 7. This references to an index value of multiple settings of almost all indicators used in this script. +7 cuts out all sell signals below the index value of 7. - 7 cuts out all buy signals above the index value of - 7. Using the FOMO Lifeguard is a key element for a sustainable and profitable strategy. As the normal FOMO Signals, the Lifeguard Signals are also bound to the “Aggressiveness”. Should the cut out of signals with the Lifeguard on be too big, try adjusting the “Aggressiveness”. With this, once can choose and make this indicator PERFECT for his own strategy and trading style. Day Traders would use no “Lifeguard” and aggressive signals. Swing Traders would use “Lifeguard” and aggressive signals. To make the life of the FOMO user even easier, I have added all adjustable Take Profit Points, Multiple entry points and Stop Loss points. Simply choose how many Take Profit points you would like to have and choose the percentage after which you would like to see the Take Profit point appear on the chart and notify you to take profits. Are you a Trader who likes multiple entries? Also no problem with FOMO. Select how many additional entries you would like to have and after how many percent you would like them to appear on the chart and remind you of adding to the position. What would a Strategy be without a Stop Loss? Same settings apply here as on the TPs and MEs . Crypto Modified Indicators “Show Divergences?” - On/Off to show Divergences on the Chart based on the data of 10 different indicators. “Show Custom Divergences?” - On/Off to show Divergences on the chart of a custom timeframe. “Custom Divergence Timeframe?” - Choose the Timeframe for which the Custom Divergences should appear on the chart. “Show Oversold/bought?” - On/Off to change the colour of the chart in Oversold/bought conditions. “Oversold/bought value?” - Choose a value for which the chart is Oversold/bought. “Show Fibonacci Levels?” - On/Off to show automatic Fibonacci Levels. “Fibonacci Lookback Lenght” - This value states how many candles from right now are taken into account to paint the Fibonacci Levels. “Fibonacci Lookback Lenght” - Choose a custom Timeframe that should be used to paint the Fibonacci Levels. Crypto Modified Indicators 2 “Show EMAs?” - On/Off to show three EMAs on the chart, after the example of @Teddycleps “EMA Lenght 1” - Choose a value for the first EMA Lenght “EMA Lenght 2 ” - Choose a value for the second EMA Lenght. “EMA Lenght 3” - Choose a value for the third EMA Lenght. The area between the first and third EMA is filled. Is EMA1 above 21, it’s filled green. Is it below, it’s filled red. “Show Ichimoku? ” - On/Off to show Ichimoku on the chart. “Show Tenkin?” - On/Off to show Tenkin on the chart. “Tenkin” - Set the lenght of the Tenkin. “Show Kijun?” - On/Off to show Kijun on the chart. “Kijun” - Set the lenght of the Kijun. “Show Senkou?” - On/Off to show the Senkou on the chart. “Senkou” - Set the lenght of the Senkou. “Displacement” - Set the value of the Displacement. “Show ZIG ZAG Lines?” - On/Off to show ZigZag Lines on the chart, used to identify short-term trends and EW counts. “ZZ Lenght 1” - Set the first lenght of the ZigZag Lines. “ZZ Lenght 2” - Set the second lenght of the ZigZag Lines. FOMO without any doubt has Custom Alerts for all Signals that it is painting on the chart. This goes for the “Normal Signals” as well as for the “Lifeguard Signals”. One can even choose to receive custom notifications for Take Profit points, Multiple Entry points and the Stop Loss points. The signals appear on the chart DURING the candle, not at the end of the candle. Therefore, the alerts do this as well. These appear during the candle. Here we can see all of the possible Alerts that can be chosen to be displayed. In total it is 30 different custom alerts, based on what the trader is looking for and how he is trading. Personally, I have 10-15 coins that I trade the most and for these I have custom notifications, mostly though only the SAFE FOMO Buy and Sell Signals. To activate Alerts for FOMO 1) Go to the “ALERT” icon on the top tool bar of your Tradingview. 2) Select “CONDITION” as “—Crypto FOMO Strategy—“ 3) Then choose ONE condition from the list of conditions. 4) On “OPTIONS” you can set how many times it appears, I have “Once per Bar”. 4.1) If you want to make sure that the signal is truly there and not just a condition for a second during the candle, choose “ONCE PER BAR CLOSE”. 5) “Expiration Time” sets the time until the alert expires. PRO users have no expiration for alerts. 6) “Alert Actions” give you a row of choices what happens and how you want to be notified. 7) “Message” is the message that you receive inside the notification. AFTERWORD/DISCLAIMER FOMO has been created after my goal to #MakeCryptoProfessionalAgain. Every aspect of it has its own and very specific use, which traders have shown to find useful in their trading. This Indicator is meant to help new and experienced traders to understand the various aspects of this market and access all of the most important and most commonly used tools, with JUST ONE CLICK. FOMO should be used responsibly and treated as an indicator. Signals, scripts, algorithms can NEVER be 100% exact. It is up to the trader to make a well thought and educated decision, wether to follow a signal or not. Our brains are way more advanced than any indicator and algorithm. I advise especially for this reason to have not just the signals turned on. Please do not use the SAME settings for each chart. Look which Aggressiveness and Lifeguard Settings fit your chart the most, you will be amazed how well some charts work with FOMO. FOMO should NOT make you FOMO into a trade anymore. It should teach you to make more educated decisions and especially for margin trading reduce the risk of liquidation. Should you have problems with being liquidated multiple times, I advise to use the “STOP LOSS” function. Most importantly, enjoy the indicator and trading in general.
อินดิเคเตอร์ Pine Script™
โดย KongTrading
Crypto Trading France algo indicator V1This is an experimental study which calculates WMA and MA channel crossover over a specified period or interval using custom lengh for its calculations. Some valuable tips: - MUST USED Heikin-Ashi candles - BTCUSD Bitstamp chart for longer backtest results - Longer timeframe (2h, 4h, 1D, W) are better - Moove the "Lengh - Speed" setting to adapt the strategy regarding the asset and timeframe used. For example on BTCUSD ( Bitstamp ) my favorites "Lengh - Speed" values are: 4H > 4, 6, 31 1D > 6, 16 W > 12 Tested with both Crypto & Forex, results are extremly accurate and entry are most of the time predicted in the right way. I don't necessarily recommend using this tool as a standalone, but rather as a supplement to your analysis systems. This indicator DO NOT REPAINT Hope you'll enjoy it :)
กลยุทธ์ Pine Script™
โดย CryptoTradingFrance
1
Long Short Double strategyLong Short Double strategy Long short strategy with stoploss and take profit. I use this script for 5min btcusd on Bitmex. (The strategy also works on other exchanges, with some small adjustments in RSI) Leverage 10x 375% profit in 2 weeks. NO REPAINT. U can Adjust the RSI for long and shorts entry`s. Study is Autoview ready. send me a PM for Paid access. If you like this strategy buy me a Pizza, Dinner, or lambo:) BITCOIN: 3BMEXTEMinsUUqUwr9GEjNA6ZBsVXB1g6u LITECOIN: LdG82pyEMMji9Bynw3hvWgUshbMKfiFdJw
กลยุทธ์ Pine Script™
โดย CryptoHooivork
2
[astropark] Long-Short Strategy V2 [alarms]This indicator is not an holy grail, but it is an amazing trend finder and works nicely between 30m and 4h timeframes :))) This is a modified version of the following strategy: After the great success of V2, as a lot of people around asked me about, I decided to publish a new version which will let you set alarms on Buy and Sell , so each time a signal is triggered you will be notified accordingly and FAST! HOW TO USE THIS INDICATOR Buy/Long at next candle's open price when you see a green "B" label on the chart , trying to buy as low as possible near or below the green cloud, considering it as moving support for more buys/longs. The bigger the cloud, the stronger the bull-trend and so the stronger the support. Sell/Short at next candle's open price when you see a red "S" label on the screen , trying to sell as high as possible near or over the red cloud, considering it as moving resistance for more sells/shorts. The bigger the cloud, the stronger the bear-trend and so the stronger the resistance. Keep in mind that the lower the timeframe you work on, the easier is the trend to change rapidly, so always set a -2% / -5% stop-loss on trades and follow the trend with a good trailing stop strategy . If you need help, just send me a direct message. This is not a free indicator, so send me a private message in order to get access to this script . Do you like my scripts? Offer me a coffee, a beer, a pizza or whatever :) BTC jar: 1K5kuYQPEqoNo6GRmJbHWMPmqwKM5S3oRR ETH jar: 0x091b541a6dd6fe08c4e7bd909baafb2fce9b975e LTC jar: LSVoAChsZrVsvbNyUfdpxtFpDAUSaUTUig XRP jar: (XRP deposit tag) 103997763 (XRP deposit address) rEb8TK3gBgk5auZkwc6sHnwrGVJH8DuaLh PS: Do you need a customization or do you need a dev who implements your strategy? send me a private message ;-)
อินดิเคเตอร์ Pine Script™
โดย astropark
21