IDEAL BB with MA (With Alerts)It gives well combination of Moving average and Bollinger bands with signals
Signaltrading
NEXT Strategy VisualizerAs suggestive by its name, NEXT Strategy Visualizer enables traders to discover, configure, and plot strategy signals (in the form of arrows) based on any of our NEXT TradingView indicators, as well as other TradingView indicators (built-in and 3rd party). It is intended to be a visual strategy builder, primarily for discretionary trading. Historic and real-time signals are plotted when strategy conditions are met. NEXT add-ons can be used standalone or as part of a broader trading system (e.g. validation or enter / exit signal only). As of this writing, NEXT Strategy Visualizer fully supports our first TradingView add-on, NEXT RSI , a volume-weighed RSI indicator. All future NEXT indicators (and we have many planned) will also be fully compatible and pluggable into Strategy Visualizer. Below is an example of a NEXT RSI (Length 9, P/V Weighing 3) overbought/oversold (contra-trend, momentum) strategy plotted on EURUSD 10-Range chart via NEXT Strategy Visualizer.
Input Parameters
Signal Source: This should be set to whichever NEXT add-on strategy you wish to visualize. In the example above, it is NEXT RSI. Signal Source will also take any other built-in or 3rd party TradingView indicator.
LE Level: When this level is crossed from below, a long entry signal is displayed on the chart. In the EURUSD example above, we used 10. Putting it together: when the NEXT RSI line (as selected in the Signal Source) crosses above 10, an up arrow, representing a long signal, is drawn.
SE Level: when this level is crossed from above, a short entry signal is displayed on the chart. In the EURUSD example above, we used 90. Putting it together: when the NEXT RSI line (as selected in the Signal Source) crosses below 90, a down arrow, representing a short signal, is drawn.
Use LX/SX: Checking this box will enable the next 2 parameters, LX Level and SX Level, intended for long exit and short exit signals.
LX Level: When this level is crossed from above, a long exit signal, in the form of a green "X", is displayed on the chart. For example, if we wanted to exit a long signal when RSI reaches and retraces under 75, we would set this value to 75. This way, an up arrow would be drawn at 10 and an "X" at 75.
SX Level: When this level is crossed from below, a short exit signal, in the form of a red "X", is displayed on the chart. For example, if we wanted to exit a short signal when RSI reaches and retraces over 25, we would set this value to 25. This way, a down arrow would be drawn at 90 and an "X" at 25.
Remember, all Level values are relative to the Signal Source . For example, the NEXT RSI scale runs 0 to 100 so numbers in that range make sense. Setting levels to any other number would cause the Strategy Visualizer to never draw a signal.
Important: In order to effectively use the NEXT Strategy Visualizer you must attach both the indicator you wish to visualize (NEXT RSI in our example) and the NEXT Strategy Visualizer indicator itself.
All strategy ideas and tutorials for individual NEXT indicators will be powered by NEXT Strategy Visualizer and published on our TradingView page under Ideas .
GnG - Cuan Sniper with 7MA and Buy Sell SignalThis Indicator possible users to get a signal when buying and selling.
Using Cross EMA :
when short EMA cross-up Long EMA is Signal to Buy
when short EMA cross-down Long EMA is Signal to Sell
Using Stochastic 14-3-3 to get signal overbought and oversold.
when oversold, and StochK is crossing-up stochD, will show signal to buy.
when overbought, and StockK is crossing-down stockD, will show signal to sell.
Using Parabolic SAR, Pivot H/L, Cloud and Linear Regression to find Resistance and Support.
Disclaimer On. Take your own risk.
Bullyena SignalsWhat is Bullyena Signals?
-It is an indicator that aids the trader in making entry/exit decisions.
-Note that this is optimized for swing traders but you can also use this for scalping.
-The algorithm contains multiple modern indicators and some of them are proprietary.
Bullyena Signals usage:
-Gives entry/exit signals
-Shows the trend of the price using a bar color overlay.
-Shows trailing stops
-Shows buy/long and take profit signals
-Ichimoku cloud for trend confirmation
Installation
- For candlestacks, make sure to Right click > Settings > Symbol > disable wicks and borders.
Access and Documentation
- Message or PM me to know how to get access
CoinExpert OverlayCandlestick and Trend Analysis with amazingly accurate Buy/Sell signals and alerts.
Includes warnings for possible tops, market manipulation , etc.
Also contains many perfectly refined indicator s ( VWMA , fast/slow EMAS/SMAS, parabolic SAR flip, auto Support/Resistance levels) that help serve making the right decisions .
Combined with CoinExpert Oscillator and CoinExpert Trend it is possibly the best trading tool up to now .
This is not an indicator, this is a WINdicator!
For access and prices, add me on Discord, Amnesio#0001 or message me here, on Tradingview.
Fib Signals | -- MoonLaunchr --Script that can display signals against key Fibonacci levels based on highs and lows within a given time-frame
Set the number of days back in time that you would like the indicator to look for the high and low for calculating fibs.
Bear Market options include sub-level fibs within the 12.3% range - 38.2 and 61.8% 3 levels deep.
Signals when crossing over and under key fibs.
Set ALERTS for each key fib piercing.
Set ALERTS when new highs or lows are made.
All levels and signals can be displayed or hidden and customised within the indicator options.
Next candle price projection.
Bull Market key fib sub-levels will be added in the next update (top 12.8% sub-levels 1,2 & 3).
Happy trading!
StratXPro Signals - Create your Strats like a ProStratXPro Signals - Create your Strats like a Pro
StratXPro introduces trading with multiple indicators and indicator settings for Buy, DCA and Sell orders.
Create your own strategy and combine up to five different indicators - each for buy, sell and dca buy in different time periods (one min - one week) in one chart at the same time!
We have implemented more than 15 major indicators that you can easily combine in your strategy and act like a pro.
All indicators are reimplemented and do not use the default TradingView indicators to overcome the inaccuracy when using different time periods.
With our backtesting version of this script (backtest.stratxpro.com) you can easily find your best strategy, find out about the indicators and visually check your best strategy.
Finally, run this script and create alerts to trade on the signals.
Have fun and discover the tremendous possibilities of StraXPro.
For access to the full version of StratXPro, please visit stratxpro.com for information.
DISCLAIMER
The creators of this script are not financial advisors, and as such, this script is no financial advice.
Anything seen or used within this script is here simply for educational purposes and it is up to you to decide what to do with this information and its results.
Please do your own research and verify any statements made before deciding to act upon them.
Do not commit any of your own resources to any trading or cryptocurrency activities without first verifying the accuracy of the information and know that your decisions are your own.
CCI Highlighted [ankit4349]>> This script is purely based on Commodity Channel Index (CCI) with multiple CCI instances being used within one oscillator.
>> User can use as much as 5 CCI instances/plot within one oscillator.
> How to use :
1. When Bullish :
Whenever CCI length 14 crosses above -100(negative 100) that means bullish momentum is supported.
Best bullish/long entry would be when CCI length 14 crosses above -100(negative 100) as mentioned above and at the same time CCI length
200 is bouncing on top of +100(positive 100).
2. When Bearish :
Whenever CCI length 14 crosses below +100(positive 100) that means bearish momentum is supported .
Best bearish/short entry would be when CCI length 14 crosses below +100(positive 100) as mentioned above and at the same time CCI length
200 is bouncing at bottom of -100(negative 100) .
> Color Clarity :
a. Bullish support is highlighted GREEN and bearish support is highlighted RED within the oscillator background with respect to
Length 1 (i.e 14 by default) .
b. PURPLE is highhighted when Length 5(i.e 200 by default) is bouncing either on top of +100(for bullish) or at bottom of -100(for bearish).
c. AQUA is highlighted when Length 3(i.e 50 by default) is bouncing on top or at bottom of 0 from either side respectively.
d. Best entry in both cases i.e bullish or bearish as mentioned above('How to use') is highlighted WHITE by default.
> Tip:
Just observe the color outputs on any timeframe in a chart as it works fractally on every timeframe , it will help you understand better with
clarity.
> You are always free to experiment with the CCI lengths, change highlighted color and hide/unhide the Lengths as per your requirements in
setting/format .
Spectro PRO 8X by HypesterThis is the new Spectro™ Pro 8X update including the following features:
✓ Auto renews Each Month
✓ Cancel Any Time & No Extra Fees
✓ Works With Market, Asset & Timeframe
✓ Entry/Exit Points Alerts
✓ Direction Change Warnings
✓ Noise Reduction
✓ Trend Analyser w/ Multiple Resolutions
✓ 8 Types of Moving Average Crossings
✓ Fine Tuning Panel
(Available on Pro 8X only - )
✓ Fine Tuning Advanced Visual Tools
✓ Dynamic Triggering System
✓ Bollinger Band® Triggering System
✓ Highly Customizable For Maximum Precision
Mongerskit Trading System v2.3 lower time frame FIXI had numerous requests and complains on why signals are only generated on larger time frames. (rarely 4hr and mostly daily and weekly time frames)
Now the sensitivity of signals generated can be manually adjusted to work on all time frames.
It is advisable to play around with the sensitivity on your favorite time frame to get a combination that works for you.
Currently we see GBPUSD on hourly time frame at 55 sensitivity which shows a profitable system.
here is a image of a lower sensitivity on 15min TF
(USABILITY)
- Use this system in conjunction to your technical analysis to achieve optimal performance.
- Best time frame is 4 hours and 12 hours on default settings, for 1 hour time frame, sensitivity of 55 has been tested to work, feel free to change sensitivity to something that works for you.
- DO NOT use the system with pairs that are consolidating.
(CHANGES)
v2.3
- Added sensitivity input, users can configure sensitivity to get buy/sell signals on lower time frames.
v2.2
- final tweaks are done to this revision
- few appearance changes
- minor reported bug fixes
v2.1
- changed the sensitivity a little more.
- fixed all the reported bugs and issues
- fixed a problem with chart scaling down when using the indicator
- fixed some typo with signal text
v2.0
- changed the sensitivity and few settings, signals are much more accurate.
- made a few appearance changes.
- Signals may appear less then before but they are much more accurate, use 4 hour and 12 hours together to determine best entry.
- this is the Dark theme, I will release the Light theme too for the ones using lighter background colors.
v1.1
- fixed the amount of times the signals are shown
- fixed some color issues
v1.0
- First free version open to public
This Indicator is not a free indicator, you can request to try the indicator in the comment section below and I will selectively give users access temporarily to try the indicator.
Feel free to message me about any questions related to the indicator.
www.uidubai.net
