Black Fridayลดสูงสุดถึง 80%

ค้นหาในสคริปต์สำหรับ "莱加内斯VS皇家社会"

GBTC & BTCE Premium Indicator- This indicator illustrates the premium of GBTC and the European equivalent, BTCE. Relative to the spot price of Bitcoin - It represents the premium investors are willing to pay to be able to gain exposure to Bitcoin . Whilst holding them in an investment vehicle such as a 401k or an ISA. - The premiums can be plotted. GBTC vs BTCUSD and BTCE vs BTCEUR OR - The "real price" of BTCUSD , GBTC and BTCE (denominated in USD) can be plotted against each other
อินดิเคเตอร์ Pine Script®
โดย Pinnacle_Investor
2
Probability: Bull/Bear Dominance | Ratio | Bar CountIntro What's the probability of the next bar being red? How about green? Well, there are many ways to quantify the probability but I am presenting just one stupidly simple (but generally accurate) way to measure it. Strangely... no one has done this before that I can find. I try to check if someone else has done it first (Pro Tip: Plz do this. We honestly don't need the 5 trillionth "MTF MAs" script.) Indicator Its a basic counting script, but the nice thing about this script is you choose the time range. It starts counting from a specified point of your choosing. It counts up the bull bars and bear bars separately. Bull Bar = Close > Open Bear Bar = Open > Close You can look at them in sum or as a ratio of Green Bars : Red Bars I know, it's almost too simple. But, here's some interesting food for thought from a layman to fellow laymen. Analysis/Edge Between the time of candle open and candle close, the price can do one of three things, close higher, close lower, or close equal to. 'Equal to' is rare on higher timeframes in liquid markets and it provides no useful information. Thus, we'll nix it for purposes of this conversation. So boil it down. The next candle is going to be a red candle or a green candle. It is popular to refer to the general probability of most candles as 50/50, with trader's mission in life being to seek an edge that tilts the probabilities slightly in their favor. The truth is the odds are probably never actually 50/50, but knowing the precisely correct probability is unknowable, just like the accuracy of a weather forecast is inherently unknowable. What we're trying to do as traders is develop systems that give us predictive probabilistic outcomes that correspond with future realities based on various ways of measuring the market (most often heavily dependent on the past). The reality is that the market can be measured in many, many different ways. The important thing is that you measure it in a way that is accurate, relevant, and universally applicable. So look at this indicator here: You start from a point in time on a chosen timeframe and you put red bars in the red column, green in the green column, and count them all up. Then you make a ratio, in this case, Green : Red. What the ratio shows you is the percentage of green bars compared to red bars . At the time of this screenshot, the 4h on the SPX starting from the 2020 bottom is showing a ratio of 1.2. This means there have been 20% more green bars than there have been red bars. Now there are 1,000 directions you can take this discussion. What is the overall volatility picture, the size of the red bars vs the green bars, what happens if you miss out on the 5 biggest green bars... so many more variables that you would need to take into account to develop a true edge from this idea. But, the bottom line fact (which is what I like about this) is that we can take this data and say with a certain level of confidence that on the SPX you have a 20% better shot at making money (otherwise stated there's a 60/40 chance) if you open a LONG trade at the beginning of a 4h candle than if you open a short. That's useful information. One could argue that it's not a complete strategy in and of itself (although I bet it could be with a couple of additional parameters). But I can tell you, based on the 4h candles in the 2020 rally if you open a short, the deck is stacked against you from this perspective. And we can actually somewhat demonstrate this to be true for our dataset because we can look at the price history and see who likely made more money. The SPX is up 1000pts off the bottom. So, thus far, for this dataset, it rings true; Bulls have been doing way better in the latter part of 2020 than the bears. Conclusion Predictive systems with a small number of variables tend to be more robust than a system with many variables when applied to a complex system. I may keep updating this script if people like it and determine aspects like population vs sample size, confidence intervals, volatility, and exclusion of outliers. For now, this is just an opening foray into the basic idea of how we can establish an edge in the markets. It really can be this simple. Thanks for Reading.
อินดิเคเตอร์ Pine Script®
โดย kurtsmock
9
Bar Balance [LucF]Bar Balance extracts the number of up, down and neutral intrabars contained in each chart bar, revealing information on the strength of price movement. It can display stacked columns representing raw up/down/neutral intrabar counts, or an up/down balance line which can be calculated and visualized in many different ways. WARNING: This is an analysis tool that works on historical bars only. It does not show any realtime information, and thus cannot be used to issue alerts or for automated trading. When realtime bars elapse, the indicator will require a browser refresh, a change to its Inputs or to the chart's timeframe/symbol to recalculate and display information on those elapsed bars. Once a trader understands this, the indicator can be used advantageously to make discretionary trading decisions. Traders used to work with my  Delta Volume Columns Pro  will feel right at home in this indicator's Inputs . It has lots of options, allowing it to be used in many different ways. If you value the bar balance information this indicator mines, I hope you will find the time required to master the use of Bar Balance well worth the investment. █  OVERVIEW The indicator has two modes: Columns and Line . Columns • In Columns mode you can display stacked Up/Down/Neutral columns. • The "Up" section represents the count of intrabars where `close > open`, "Down" where `close < open` and "Neutral" where `close = open`. • The Up section always appears above the centerline, the Down section below. The Neutral section overlaps the centerline, split halfway above and below it.  The Up and Down sections start where the Neutral section ends, when there is one. • The Up and Down sections can be colored independently using 7 different methods. • The signal line plotted in Line mode can also be displayed in Columns mode. Line • Displays a single balance line using a zero centerline. • A variable number of independent methods can be used to calculate the line (6), determine its color (5), and color the fill (5).  You can thus evaluate the state of 3 different components with this single line. • A "Divergence Levels" feature will use the line to automatically draw expanding levels on divergence events. Features available in both modes • The color of all components can be selected from 15 base colors, with 16 gradient levels used for each base color in the indicator's gradients. • A zero line can show a 6-state aggregate value of the three main volume balance modes. • The background can be colored using any of 5 different methods. • Chart bars can be colored using 5 different methods. • Divergence and large neutral count ratio events can be shown in either Columns or Line mode, calculated in one of 4 different methods. • Markers on 6 different conditions can be displayed. █  CONCEPTS Intrabar inspection Intrabar inspection means the indicator looks at lower timeframe bars ( intrabars ) making up a given chart bar to gather its information. If your chart is on a 1-hour timeframe and the intrabar resolution determined by the indicator is 5 minutes, then 12 intrabars will be analyzed for each chart bar and the count of up/down/neutral intrabars among those will be tallied. Bar Balances and calculation methods The indicator uses a variety of methods to evaluate bar balance and to derive other calculations from them: 1. Balance on Bar : Uses the relative importance of instant Up and Down counts on the bar. 2. Balance Averages : Uses the difference between the EMAs of Up and Down counts. 3. Balance Momentum : Starts by calculating, separately for both Up and Down counts, the difference between the same EMAs used in Balance Averages and an SMA of double the period used for the EMAs. These differences are then aggregated and finally, a bounded momentum of that aggregate is calculated using RSI. 4. Markers Bias : It sums the bull/bear occurrences of the four previous markers over a user-defined period (the default is 14). 5. Combined Balances : This is the aggregate of the instant bull/bear bias of the three main bar balances. 6. Dual Up/Down Averages : This is a display mode showing the EMA calculated for each of the Up and Down counts. Interpretation of neutral intrabars What do neutral intrabars mean? When price does not change during a bar, it can be because there is simply no interest in the market, or because of a perfect balance between buyers and sellers. The latter being more improbable, Bar Balance assumes that neutral bars reveal a lack of interest, which entails uncertainty. That is the reason why the option is provided to interpret ratios of neutral intrabars greater than 50% as divergences. It is also the rationale behind the option to dampen signal lines on the inverse ratio of neutral intrabars, so that zero intrabars do not affect the signal, and progressively larger proportions of neutral intrabars will reduce the signal's amplitude, as the balance calcs using the up/down counts lose significance. The impact of the dampening will vary with markets. Weaker markets such as cryptos will often contain greater numbers of neutral intrabars, so dampening the Line in that sector will have a greater impact than in more liquid markets. █  FEATURES 1 — Columns • While the size of the Up/Down columns always represents their respective importance on the bar, their coloring mode is independent. The default setup uses a standard coloring mode where the Up/Down columns over/under the zero line are always in the bull/bear color with a higher intensity for the winning side. Six other coloring modes allow you to pack more information in the columns. When choosing to color the top columns using a bull/bear gradient on Balance Averages, for example, you will end up with bull/bear colored tops. In order for the color of the bottom columns to continue to show the instant bar balance, you can then choose the "Up/Down Ratio on Bar — Dual Solid Colors" coloring mode to make those bars the color of the winning side for that bar. • Line mode shows only the line, but Columns mode allows displaying the line along with it. If the scale of the line is different than that of the scale of the columns, the line will often appear flat. Traders may find even a flat line useful as its bull/bear colors will be easily distinguishable. 2 — Line • The default setup for Line mode uses a calculation on "Balance Momentum", with a fill on the longer-term "Balance Averages" and a line color based on the "Markers Bias". With the background set on "Line vs Divergence Levels" and the zero line on the hard-coded "Combined Bar Balances", you have access to five distinct sources of information at a glance, to which you can add divergences, divergences levels and chart bar coloring. This provides powerful potential in displaying bar balance information. • When no columns are displayed, Line mode can show the full scale of whichever line you choose to calculate because the columns' scale no longer interferes with the line's scale. • Note that when "Balance on Bar" is selected, the Neutral count is also displayed as a ratio of the balance line. This is the only instance where the Neutral count is displayed in Line mode. • The "Dual Up/Down Averages" is an exception as it displays two lines: one average for the Up counts and another for the Down counts. This mode will be most useful when Columns are also displayed, as it provides a reference for the top and bottom columns. 3 — Zero Line The zero line can be colored using two methods, both based on the Combined Balances, i.e., the aggregate of the instant bull/bear bias of the three main bar balances. • In "Six-state Dual Color Gradient" mode, a dot appears on every bar. Its color reflects the bull/bear state of the Combined Balances, and the dot's brightness reflects the tally of balance biases. • In "Dual Solid Colors (All Bull/All Bear Only)" a dot only appears when all three balances are either bullish or bearish. The resulting pattern is identical to that of Marker 1. 4 — Divergences • Divergences are displayed as a small circle at the top of the scale. Four different types of divergence events can be detected. Divergences occur whenever the bull/bear bias of the method used diverges with the bar's price direction. • An option allows you to include in divergence events instances where the count of neutral intrabars exceeds 50% of the total intrabar count. • The divergence levels are dynamic levels that automatically build from the line's values on divergence events. On consecutive divergences, the levels will expand, creating a channel. This implementation of the divergence levels corresponds to my view that divergences indicate anomalies, hesitations, points of uncertainty if you will. It excludes any association of a pre-determined bullish/bearish bias to divergences. Accordingly, the levels merely take note of divergence events and mark those points in time with levels. Traders then have a reference point from which they can evaluate further movement. The bull/bear/neutral colors used to plot the levels are also congruent with this view in that they are determined by price's position relative to the levels, which is how I think divergences can be put to the most effective use. 5 — Background • The background can show a bull/bear gradient on four different calculations. You can adjust its brightness to make its visual importance proportional to how you use it in your analysis. 6 — Chart bars • Chart bars can be colored using five different methods. • You have the option of emptying the body of bars where volume does not increase, as does my TLD indicator, the idea behind this being that movement on bars where volume does not increase is less relevant. 7 — Intrabar Resolution You can choose between three modes. Two of them are automatic and one is manual:   a) Fast, Longer history, Auto-Steps (~12 intrabars) : Optimized for speed and deeper history. Uses an average minimum of 12 intrabars.   b) More Precise, Shorter History Auto-Steps (~24 intrabars) : Uses finer intrabar resolution. It is slower and provides less history. Uses an average minimum of 24 intrabars.   c) Fixed : Uses the fixed resolution of your choice. Auto-Steps calculations vary for 24/7 and conventional markets in order to achieve the proper target of minimum intrabars. You can choose to view the intrabar resolution currently used to calculate delta volume. It is the default. The proper selection of the intrabar resolution is important. It must achieve maximal granularity to produce precise results while not unduly slowing down calculations, or worse, causing runtime errors. 8 — Markers Six markers are available: 1. Combined Balances Agreement : All three Bar Balances are either bullish or bearish. 2. Up or Down % Agrees With Bar : An up marker will appear when the percentage of up intrabars in an up chart bar is greater than the specified percentage. Conditions mirror to down bars. 3. Divergence confirmations By Price : One of the four types of balance calculations can be used to detect divergences with price. Confirmations occur when the bar following the divergence confirms the balance bias. Note that the divergence events used here do not include neutral intrabar events. 4. Balance Transitions : Bull/bear transitions of the selected balance. 5. Markers Bias Transitions : Bull/bear transitions of the Markers Bias. 6. Divergence Confirmations By Line : Marks points where the line first breaches a divergence level. Markers appear when the condition is detected, without delay. Since nothing is plotted in realtime, markers do not appear on the realtime bar. 9 — Settings • Two modes can be selected to dampen the line on the ratio of neutral intrabars. • A distinct weight can be attributed to the count of the latter half of intrabars, on the assumption that later intrabars may be more important in determining the outcome of chart bars. • Allows control over the periods of the different moving averages used in calculations. • The default periods used for the various calculations define the following hierarchy from slow to fast:   Balance Averages: 50,   Balance Momentum: 20,   Dual Up/Down Averages: 20,   Marker Bias: 10. █  LIMITATIONS • This script uses a special characteristic of the `security()` function allowing the inspection of intrabars—which is not officially supported by TradingView. • The method used does not work on the realtime bar—only on historical bars. • The indicator only works on some chart resolutions: 3, 5, 10, 15 and 30 minutes, 1, 2, 4, 6, and 12 hours, 1 day, 1 week and 1 month. The script’s code can be modified to run on other resolutions, but chart resolutions must be divisible by the lower resolution used for intrabars and the stepping mechanism could require adaptation. • When using the "Line vs Divergence Levels — Dual Color Gradient" color mode to fill the line, background or chart bars, keep in mind that a line calculation mode must be defined for it to work, as it determines gradients on the movement of the line relative to divergence levels. If the line is hidden, it will not work. • When the difference between the chart’s resolution and the intrabar resolution is too great, runtime errors will occur. The Auto-Steps selection mechanisms should avoid this. • Alerts do not work reliably when `security()` is used at intrabar resolutions. Accordingly, no alerts are configured in the indicator. • The color model used in the indicator provides for fancy visuals that come at a price; when you change values in Inputs , it can take 20 seconds for the changes to materialize. Luckily, once your color setup is complete, the color model does not have a large performance impact, as in normal operation the `security()` calls will become the most important factor in determining response time. Also, once in a while a runtime error will occur when you change inputs. Just making another change will usually bring the indicator back up. █  RAMBLINGS Is this thing useful? I'll let you decide. Bar Balance acts somewhat like an X-Ray on bars. The intrabars it analyzes are no secret; one can simply change the chart's resolution to see the same intrabars the indicator uses. What the indicator brings to traders is the precise count of up/down/neutral intrabars and, more importantly, the calculations it derives from them to present the information in a way that can make it easier to use in trading decisions. How reliable is Bar Balance information? By the same token that an up bar does not guarantee that more up bars will follow, future price movements cannot be inferred from the mere count of up/down/neutral intrabars. Price movement during any chart bar for which, let's say, 12 intrabars are analyzed, could be due to only one of those intrabars. One can thus easily see how only relying on bar balance information could be very misleading. The rationale behind Bar Balance is that when the information mined for multiple chart bars is aggregated, it can provide insight into the history behind chart bars, and thus some bias as to the strength of movements. An up chart bar where 11/12 intrabars are also up is assumed to be stronger than the same up bar where only 2/12 intrabars are up. This logic is not bulletproof, and sometimes Bar Balance will stray. Also, keep in mind that balance lines do not represent price momentum as RSI would. Bar Balance calculations have no idea where price is. Their perspective, like that of any historian, is very limited, constrained that it is to the narrow universe of up/down/neutral intrabar counts. You will thus see instances where price is moving up while Balance Momentum, for example, is moving down. When Bar Balance performs as intended, this indicates that the rally is weakening, which does necessarily imply that price will reverse. Occasionally, price will merrily continue to advance on weakening strength. Divergences Most of the divergence detection methods used here rely on a difference between the bias of a calculation involving a multi-bar average and a given bar's price direction. When using "Bar Balance on Bar" however, only the bar's balance and price movement are used. This is the default mode. As usual, divergences are points of interest because they reveal imbalances, which may or may not become turning points. I do not share the overwhelming enthusiasm traders have for the purported ability of bullish/bearish divergences to indicate imminent reversals. Superfluity In "The Bed of Procrustes", Nassim Nicholas Taleb writes: To bankrupt a fool, give him information . Bar Balance can display lots of information. While learning to use a new indicator inevitably requires an adaptation period where we put it through its paces and try out all its options, once you have become used to Bar Balance and decide to adopt it, rigorously eliminate the components you don't use and configure the remaining ones so their visual prominence reflects their relative importance in your analysis. I tried to provide flexible options for traders to control this indicator's visuals for that exact reason—not for window dressing. █  NOTES For traders • To avoid misleading traders who don't read script descriptions, the indicator shows nothing in the realtime bar. • The Data Window shows key values for the indicator. • All gradients used in this indicator determine their brightness intensities using advances/declines in the signal—not their relative position in a fixed scale. • Note that because of the way gradients are optimized internally, changing their brightness will sometimes require bringing down the value a few steps before you see an impact. • Because this indicator does not use volume, it will work on all markets. For coders • For those interested in gradients, this script uses an advanced version of the Advance/Decline gradient function from the PineCoders Color Gradient (16 colors) Framework . It allows more precise control over the range, steps and min/max values of the gradients. • I use the PineCoders Coding Conventions for Pine to write my scripts. • I used functions modified from the PineCoders MTF Selection Framework for the selection of timeframes. █  THANKS TO: — alexgrover who helped me think through the dampening method used to attenuate signal lines on high ratios of neutral intrabars. — A guy called Kuan who commented on a Backtest Rookies presentation of their Volume Profile indicator . The technique I use to inspect intrabars is derived from Kuan's code. — theheirophant , my partner in the exploration of the sometimes weird abysses of `security()`’s behavior at intrabar resolutions. — midtownsk8rguy , my brilliant companion in mining the depths of Pine graphics. He is also the co-author of the PineCoders Color Gradient Frameworks .
อินดิเคเตอร์ Pine Script®
โดย LucF
29
RedK_Directional Index / K xDMIHere's a modern take on the famous DMI/ADX. i first wrote this on another platform few years ago, so i'm happy to be able to share it on TradingView quick refresher: what does DMI/ADX tell us: ------------------------------------------------------ in simple terms, at the core of this indicator, there are 3 main calculations / lines: the Plus Directional Index ( +DI ) which represents how much the bulls are able to push the high of a bar compared to previous one, the Minus Directional Index ( -DI ), showing how much the bears are able to push the low of a bar from previous one, then the Average Directional index ( ADX ) line, which creates an oscillator of the +DI and -DI to represent the strength of a trend -- usually the lines will be colored accordingly (bulls = green, bears = red, and any different color for the ADX ) Similar to my version of the RSI , we take a classic concept, then use the computing and visualization "super powers" available to us today, to extend and improve on what those masters created in the past. I guess they sort of expected us to do exactly that :) this "extended" version of DMI/ADX provides couple of highly needed features (in my opinion) -- let's explore: trying as much as possible to avoid jargon - pls forgive me if i failed in some places. ------------------------------------------------------------------------------------------------- 1 - the big change: the ability to visualize the ADX in a way that makes some more sense. - the original calculation restricted the ADX to oscillate below zero - i'm sure they had a good reason to build it that way in the past - but to me, it becomes super hard to interpret what the ADX line means, especially when a negative trend (the bears) take over. by removing that restriction and allowing the ADX to oscillate up or down (and we're free to do that, so the indicator shows *us* what *we need* to see), we end up with an improved representation of the trend and the trend strength. - also the original calculation applies a moving average (default 14 bars) of a moving average (another 14 of the Directional Indexes, which represent the strength of bulls vs bears) to calculate the ADX - that makes the ADX very "removed" from the base price values - i change that, and just smooth the initial +Di / -Di then calculate the ADX from there. again, this shows me the outcome of the (relatively) immediate moves. 2 - i use weighted average WMA () in all my averaging calculations .. i believe this type of average is the best to express the importance of recent days / bars vs the ones further in the past, compared to other averaging techniques 3 - ability to make the DMI volume-weighted .. but contrary to my RSI , this is not set by default. 4 - couple of options to view the unrestricted ADX (as an area or as histogram/columns .. which i call Vertical Bars) for improved visualization other stuff: 5 - a "step" option for the ADX .. you can set the step option to an increment of, say 5 or 10. this is in case you prefer to see the trend more in "quality" terms - so the equivalent of weak, medium, strong, v. strong...etc -- since in reality, a number like 47.7683 doesn't really mean anything specific 6 - optional "strong trend" adjustable level Settings & usage suggestion: ----------------------------------- i prefer to use the defaults (length = 7, smoothing = 3, ..etc) -- i believe these are more suitable to the much faster trading that we have now. you can review the comparison chart and see if this works for you, and adjust as you need. from a "signal" standpoint, you can use the xDMI as you use the classic DMI/ADX, bulls (or bears) are in control when the corresponding DI line crosses the other going up, *AND* moving above the "strong trend" level that you can set as an extra filter (usually a value between 20 to 30), while ADX will show the quality/strength of the trend. i suggest you also utilize this indicator with other trend / momentum confirmation methods, and additional analysis and not in isolation - as well as inspecting the prevailing / longer time frame to ensure you're acting in the direction of the broader move / trend. the above chart includes a side-by-side comparison between our new xDMI with the classic DMI/ADX using the same settings - then we add at the bottom panel also the xDMI, but with my default (faster) settings and showing other visualization options that can be utilized - the Moving Averages on the top / price panel is just to help put the price movement into perspective in terms of trend and trend strength. The code is open and commented - please feel free to use, share, comment & provide feedback. if you're a DMI fan, and you find this useful in your trading, i would be more than happy to hear about it Good luck!
อินดิเคเตอร์ Pine Script®
โดย RedKTrader
7
BEST Engulfing + Breakout StrategyHello traders This is a simple algorithm for a Tradingview strategy tracking a convergence of 2 unrelated indicators. Convergence is the solution to my trading problems. It's a puzzle with infinite possibilities and only a few working combinations. Here's one that I like - Engulfing pattern - Price vs Moving average for detecting a breakout Definition Take out the notebooks :) and some coffee (good for focus). I'm bullish in coffee The engulfing pattern is a two-candle reversal pattern. The second candle completely ‘engulfs’ the real body of the first one, without regard to the length of the tail shadows. The bullish Engulfing pattern appears in a downtrend and is a combination of one red candle followed by a larger green candle The bearish Engulfing pattern appears in a downtrend and is a combination of one green candle followed by a larger red candle Example: imgur.com We're bored sir... what's the point of all this? In summary, an engulfing is a pattern to track reversals. (the whole TradingView audience stands up now giving a standing ovation) Adding the Price vs Moving average filters allows to track reversals with momentums (half of the audience collapsed because this is too awesome) Ok sir... you picked up my interest I included some cool backtest filters: - date range filtering - flexible take profit in USD value (plotted in blue) - flexible stop loss in USD value (plotted in red) All the best Dave
กลยุทธ์ Pine Script®
โดย Daveatt
22
Premium/Discount (Input)Used to show Contango or Backwardation in futures contracts vs spot price. You can input your own tickers so can technically can be used to compare anything. * In this example I'm showing Okex Quarterly contract vs Okex spot index price because it showcases it better. * If you are using this after 2019 the default setting will not work because I set it to Bitmex which does not currently have a "current contract in front" ticker available. It should be fairly self explanatory, but just ask below if you have any questions.
อินดิเคเตอร์ Pine Script®
โดย Plumptoiletduck
8
Volume Profile Free Ultra SLI (100 Levels Value Area VWAP) - RRBVolume Profile Free Ultra SLI by RagingRocketBull 2019 Version 1.0 This indicator calculates Volume Profile for a given range and shows it as a histogram consisting of 100 horizontal bars. This is basically the MAX SLI version with +50 more Pinescript v4 line objects added as levels. It can also show Point of Control (POC), Developing POC, Value Area/VWAP StdDev High/Low as dynamically moving levels. Free accounts can't access Standard TradingView Volume Profile, hence this indicator. There are several versions: Free Pro, Free MAX SLI, Free Ultra SLI, Free History. This is the Free Ultra SLI version. The Differences are listed below: - Free Pro: 25 levels, +Developing POC, Value Area/VWAP High/Low Levels, Above/Below Area Dimming - Free MAX SLI: 50 levels, 2x SLI modes for Buy/Sell or even higher res 150 levels - Free Ultra SLI: 100 levels, packed to the limit, 2x SLI modes for Buy/Sell or even higher res 300 levels - Free History: auto highest/lowest, historic poc/va levels for each session Features: - High-Res Volume Profile with up to 100 levels (line implementation) - 2x SLI modes for even higher res: 300 levels with 3x vertical SLI, 100 buy/sell levels with 2x horiz SLI - Calculate Volume Profile on full history - POC, Developing POC Levels - Buy/Sell/Total volume modes - Side Cover - Value Area, VAH/VAL dynamic levels - VWAP High/Low dynamic levels with Source, Length, StdDev as params - Show/Hide all levels - Dim Non Value Area Zones - Custom Range with Highlighting - 3 Anchor points for Volume Profile - Flip Levels Horizontally - Adjustable width, offset and spacing of levels - Custom Color for POC/VA/VWAP levels, Transparency for buy/sell levels WARNING: - Compilation Time: 1 min 20 sec Usage: - specify max_level/min_level/spacing (required) - select range (start_bar, range length), confirm with range highlighting - select volume type: Buy/Sell/Total - select mode Value Area/VWAP to show corresponding levels - flip/select anchor point to position the buy/sell levels - use Horiz Buy/Sell SLI mode with 100 or Vertical SLI with 300 levels if needed - use POC/Developing POC/VA/VWAP High/Low as S/R levels. Usually daily values from 1-3 days back are used as levels for the current day. SLI: use SLI modes to extend the functionality of the indicator: - Horiz Buy/Sell 2x SLI lets you view 100 Buy/Sell Levels at the same time - Vertical Max_Vol 3x SLI lets you increase the resolution to 300 levels - you need at least 2 instances of the indicator attached to the same chart for SLI to work 1) Enable Horiz SLI: - attach 2 indicator instances to the chart - make sure all instances have the same min_level/max_level/range/spacing settings - select volume type for each instance: you can have a buy/sell or buy/total or sell/total SLI. Make sure your buy volume instance is the last attached to be displayed on top of sell/total instances without overlapping. - set buy_sell_sli_mode to true for indicator instances with volume_type = buy/sell, for type total this is optional. - this basically tells the script to calculate % lengths based on total volume instead of individual buy/sell volumes and use ext offset for sell levels - Sell Offset is calculated relative to Buy Offset to stack/extend sell after buy. Buy Offset = Zero - Buy Length. Sell Offset = Buy Offset - Sell Length = Zero - Buy Length - Sell Length - there are no master/slave instances in this mode, all indicators are equal, poc/va levels are not affected and can work independently, i.e. one instance can show va levels, another - vwap. 2) Enable Vertical SLI: - attach the first instance and evaluate the full range to roughly determine where is the highest max_vol/poc level i.e. 0..20000, poc is in the bottom half (third, middle etc) or - add more instances and split the full vertical range between them, i.e. set min_level/max_level of each corresponding instance to 0..10000, 10000..20000 etc - make sure all instances have the same range/spacing settings - an instance with a subrange containing the poc level of the full range is now your master instance (bottom half). All other instances are slaves, their levels will be calculated based on the max_vol/poc of the master instance instead of local values - set show_max_vol_sli to true for the master instance. for slave instances this is optional and can be used to check if master/slave max_vol values match and slave can read the master's value. This simply plots the max_vol value - you can also attach all instances and set show_max_vol_sli to true in all of them - the instance with the largest max_vol should become the master Auto/Manual Ext Max_Vol Modes: - for auto vertical max_vol SLI mode set max_vol_sli_src in all slave instances to the max_vol of the master indicator: "VolumeProfileFree_MAX_RRB: Max Volume for Vertical SLI Mode". It can be tricky with 2+ instances - in case auto SLI mode doesn't work - assign max_vol_sli_ext in all slave instances the max_vol value of the master indicator manually and repeat on each change - manual override max_vol_sli_ext has higher priority than auto max_vol_sli_src when both values are assigned, when they are 0 and close respectively - SLI is disabled - master/slave max_vol values must match on each bar at all times to maintain proper level scale, otherwise slave's levels will look larger than they should relative to the master's levels. - Max_vol (red) is the last param in the long list of indicator outputs - the only true max_vol/poc in this SLI mode is the master's max_vol/poc. All poc/va levels in slaves will be irrelevant and are disabled automatically. Slaves can only show VWAP levels. - VA Levels of the master instance in this SLI mode are calculated based on the subrange, not the whole range and may be inaccurate. Cross check with the full range. WARNING! - auto mode max_vol_sli_src is experimental and may not work as expected - you can only assign auto mode max_vol_sli_src = max_vol once due to some bug with unhandled exception/buffer overflow in Tradingview. Seems that you can clear the value only by removing the indicator instance - sometimes you may see a "study in error state" error when attempting to set it back to close. Remove indicator/Reload chart and start from scratch - volume profile may not finish to redraw and freeze in an ugly shape after an UI parameter change when max_vol_sli_src is assigned a max_vol value. Assign it to close - VP should redraw properly, but it may not clear the assigned max_vol value - you can't seem to be able to assign a proper auto max_vol value to the 3rd slave instance - 2x Vertical SLI works and tested in both auto/manual, 3x SLI - only manual seems to work (you can have a mixed mode: 2nd instance - auto, 3rd - manual) Notes: - This code uses Pinescript v3 compatibility framework - This code is 20x-30x faster (main for cycle is removed) especially on lower tfs with long history - only 4-5 sec load/redraw time vs 30-60 sec of the old Pro versions - Instead of repeatedly calculating the total sum of volumes for the whole range on each bar, vol sums are now increased on each bar and passed to the next in the range making it a per range vs per bar calculation that reduces time dramatically - 100 levels consist of 50 main plot levels and 50 line objects used as alternate levels, differences are: - line objects are always shown on top of other objects, such as plot levels, zero line and side cover, it's not possible to cover/move them below. - all line objects have variable lengths, use actual x,y coords and don't need side cover, while all plot levels have a fixed length of 100 bars, use offset and require cover. - all key properties of line objects, such as x,y coords, color can be modified, objects can be moved/deleted, while this is not possible for static plot levels. - large width values cause line objects to expand only up/down from center while their length remains the same and stays within the level's start/end points similar to an area style. - large width values make plot levels expand in all directions (both h/v), beyond level start/end points, sometimes overlapping zero line, making them an inaccurate % length representation, as opposed to line objects/plot levels with area style. - large width values translate into different widths on screen for line objects and plot levels. - you can't compensate for this unwanted horiz width expansion of plot levels because width uses its own units, that don't translate into bars/pixels. - line objects are visible only when num_levels > 50, plot levels are used otherwise - Since line objects are lines, plot levels also use style line because other style implementations will break the symmetry/spacing between levels. - if you don't see a volume profile check range settings: min_level/max_level and spacing, set spacing to 0 (or adjust accordingly based on the symbol's precision, i.e. 0.00001) - you can view either of Buy/Sell/Total volumes, but you can't display Buy/Sell levels at the same time using a single instance (this would 2x reduce the number of levels). Use 2 indicator instances in horiz buy/sell sli mode for that. - Volume Profile/Value Area are calculated for a given range and updated on each bar. Each level has a fixed length. Offsets control visible level parts. Side Cover hides the invisible parts. - Custom Color for POC/VA/VWAP levels - UI Style color/transparency can only change shape's color and doesn't affect textcolor, hence this additional option - Custom Width - UI Style supports only width <= 4, hence this additional option - POC is visible in both modes. In VWAP mode Developing POC becomes VWAP, VA High and Low => VWAP High and Low correspondingly to minimize the number of plot outputs - You can't change buy/sell level colors from input (only transparency) - this requires 2x plot outputs => 2x reduces the number of levels to fit the max 64 limit. That's why 2 additional plots are used to dim the non Value Area zones - You can change level transparency of line objects. Due to Pinescript limitations, only discrete values are supported. - Inverse transp correlation creates the necessary illusion of "covered" line objects, although they are shown on top of the cover all the time - If custom lines_transp is set the illusion will break because transp range can't be skewed easily (i.e. transp 0..100 is always mapped to 100..0 and can't be mapped to 50..0) - transparency can applied to lines dynamically but nva top zone can't be completely removed because plot/mixed type of levels are still used when num_levels < 50 and require cover - transparency can't be applied to plot levels dynamically from script this can be done only once from UI, and you can't change plot color for the past length bars - All buy/sell volume lengths are calculated as % of a fixed base width = 100 bars (100%). You can't set show_last from input to change it - Range selection/Anchoring is not accurate on charts with time gaps since you can only anchor from a point in the future and measure distance in time periods, not actual bars, and there's no way of knowing the number of future gaps in advance. - Adjust Width for Log Scale mode now also works on high precision charts with small prices (i.e. 0.00001) - in Adjust Width for Log Scale mode Level1 width extremes can be capped using max deviation (when level1 = 0, shift = 0 width becomes infinite) - There's no such thing as buy/sell volume, there's just volume, but for the purposes of the Volume Profile method, assume: bull candle = buy volume, bear candle = sell volume P.S. I am your grandfather, Luke! Now, join the Dark Side in your father's steps or be destroyed! Once more the Sith will rule the Galaxy, and we shall have peace...
อินดิเคเตอร์ Pine Script®
โดย RagingRocketBull
112
Volume Profile Free MAX SLI (50 Levels Value Area VWAP) by RRBVolume Profile Free MAX SLI by RagingRocketBull 2019 Version 1.0 All available Volume Profile Free MAX SLI versions are listed below (They are very similar and I don't want to publish them as separate indicators): ver 1.0: style columns implementation ver 2.0: style histogram implementation ver 3.0: style line implementation This indicator calculates Volume Profile for a given range and shows it as a histogram consisting of 50 horizontal bars. It can also show Point of Control (POC), Developing POC, Value Area/VWAP StdDev High/Low as dynamically moving levels. Free accounts can't access Standard TradingView Volume Profile, hence this indicator. There are several versions: Free Pro, Free MAX SLI, Free History. This is the Free MAX SLI version. The Differences are listed below: - Free Pro: 25 levels, +Developing POC, Value Area/VWAP High/Low Levels, Above/Below Area Dimming - Free MAX SLI: 50 levels, packed to the limit, 2x SLI modes for Buy/Sell or even higher res 150 levels - Free History: auto highest/lowest, historic poc/va levels for each session Features: - High-Res Volume Profile with up to 50 levels (3 implementations) - 20-30x faster than the old Pro versions especially on lower tfs with long history - 2x SLI modes for even higher res: 150 levels with 3x vertical SLI, 50 buy/sell levels with 2x horiz SLI - Calculate Volume Profile on full history - POC, Developing POC Levels - Buy/Sell/Total volume modes - Side Cover - Value Area, VAH/VAL dynamic levels - VWAP High/Low dynamic levels with Source, Length, StdDev as params - Show/Hide all levels - Dim Non Value Area Zones - Custom Range with Highlighting - 3 Anchor points for Volume Profile - Flip Levels Horizontally - Adjustable width, offset and spacing of levels - Custom Color for POC/VA/VWAP levels and Transparency for buy/sell levels Usage: - specify max_level/min_level/spacing (required) - select range (start_bar, range length), confirm with range highlighting - select volume type: Buy/Sell/Total - select mode Value Area/VWAP to show corresponding levels - flip/select anchor point to position the buy/sell levels - use Horiz SLI mode for 50 Buy/Sell or Vertical SLI for 150 levels if needed - use POC/Developing POC/VA/VWAP High/Low as S/R levels. Usually daily values from 1-3 days back are used as levels for the current day. SLI: - use SLI modes to extend the functionality of the indicator: - Horiz Buy/Sell 2x SLI lets you view 50 Buy/Sell Levels at the same time - Vertical Max_Vol 3x SLI lets you increase the resolution to 150 levels - you need at least 2 instances of the indicator attached to the same chart for SLI to work 1) Enable Horiz SLI: - attach 2 indicator instances to the chart - make sure all instances have the same min_level/max_level/range/spacing settings - select volume type for each instance: you can have a buy/sell or buy/total or sell/total SLI. Make sure your buy volume instance is the last attached to be displayed on top of sell/total instances without overlapping. - set buy_sell_sli_mode to true for indicator instances with volume_type = buy/sell, for type total this is optional. - this basically tells the script to calculate % lengths based on total volume instead of individual buy/sell volumes and use ext offset for sell levels - Sell Offset is calculated relative to Buy Offset to stack/extend sell after buy. Buy Offset = Zero - Buy Length. Sell Offset = Buy Offset - Sell Length = Zero - Buy Length - Sell Length - there are no master/slave instances in this mode, all indicators are equal, poc/va levels are not affected and can work independently, i.e. one instance can show va levels, another - vwap. 2) Enable Vertical SLI: - attach the first instance and evaluate the full range to roughly determine where is the highest max_vol/poc level i.e. 0..20000, poc is in the bottom half (third, middle etc) or - add more instances and split the full vertical range between them, i.e. set min_level/max_level of each corresponding instance to 0..10000, 10000..20000 etc - make sure all instances have the same range/spacing settings - an instance with a subrange containing the poc level of the full range is now your master instance (bottom half). All other instances are slaves, their levels will be calculated based on the max_vol/poc of the master instance instead of local values - set show_max_vol_sli to true for the master instance. for slave instances this is optional and can be used to check if master/slave max_vol values match and slave can read the master's value. This simply plots the max_vol value - you can also attach all instances and set show_max_vol_sli to true in all of them - the instance with the largest max_vol should become the master Auto/Manual Ext Max_Vol Modes: - for auto vertical max_vol SLI mode set max_vol_sli_src in all slave instances to the max_vol of the master indicator: "VolumeProfileFree_MAX_RRB: Max Volume for Vertical SLI Mode". It can be tricky with 2+ instances - in case auto SLI mode doesn't work - assign max_vol_sli_ext in all slave instances the max_vol value of the master indicator manually and repeat on each change - manual override max_vol_sli_ext has higher priority than auto max_vol_sli_src when both values are assigned, when they are 0 and close respectively - SLI is disabled - master/slave max_vol values must match on each bar at all times to maintain proper level scale, otherwise slave's levels will look larger than they should relative to the master's levels. - Max_vol (red) is the last param in the long list of indicator outputs - the only true max_vol/poc in this SLI mode is the master's max_vol/poc. All poc/va levels in slaves will be irrelevant and are disabled automatically. Slaves can only show VWAP levels. - VA Levels of the master instance in this SLI mode are calculated based on the subrange, not the whole range. Cross check with the full range. WARNING! - auto mode max_vol_sli_src is experimental and may not work as expected - you can only assign auto mode max_vol_sli_src = max_vol once due to some bug with unhandled exception/buffer overflow in Tradingview. Seems that you can clear the value only by removing the indicator instance - sometimes you may see a "study in error state" error when attempting to set it back to close. Remove indicator/Reload chart and start from scratch - volume profile may not finish to redraw and freeze in an ugly shape after an UI parameter change when max_vol_sli_src is assigned a max_vol value. Assign it to close - VP should redraw properly, but it may not clear the assigned max_vol value - you can't seem to be able to assign a proper auto max_vol value to the 3rd slave instance - 2x Vertical SLI works and tested in both auto/manual, 3x SLI - only manual seems to work Notes: - This code is 20x-30x faster (main for cycle is removed) especially on lower tfs with long history - only 2-3 sec load/redraw time vs 30-60 sec of the old Pro versions - Instead of repeatedly calculating the total sum of volumes for the whole range on each bar, vol sums are now increased on each bar and passed to the next in the range making it a per range vs per bar calculation that reduces time dramatically - hist_base for levels still results is ugly redraw - if you don't see a volume profile check range settings: min_level/max_level and spacing, set spacing to 0 (or adjust accordingly based on the symbol's precision, i.e. 0.00001) - you can view either of Buy/Sell/Total volumes, but you can't display Buy/Sell levels at the same time using a single instance (this would 2x reduce the number of levels). Use 2 indicator instances in horiz buy/sell sli mode for that. - Volume Profile/Value Area are calculated for a given range and updated on each bar. Each level has a fixed length. Offsets control visible level parts. Side Cover hides the invisible parts. - Custom Color for POC/VA/VWAP levels - UI Style color/transparency can only change shape's color and doesn't affect textcolor, hence this additional option - Custom Width - UI Style supports only width <= 4, hence this additional option - POC is visible in both modes. In VWAP mode Developing POC becomes VWAP, VA High and Low => VWAP High and Low correspondingly to minimize the number of plot outputs - You can't change buy/sell level colors from input (only plot transparency) - this requires 2x plot outputs => 2x reduces the number of levels to fit the max 64 limit. That's why 2 additional plots are used to dim the non Value Area zones - All buy/sell volume lengths are calculated as % of a fixed base width = 100 bars (100%). You can't set show_last from input to change it - There's no such thing as buy/sell volume, there's just volume, but for the purposes of the Volume Profile method, assume: bull candle = buy volume, bear candle = sell volume P.S. Gravitonium Levels Are Increasing. Unobtainium is nowhere to be found! Links on Volume Profile and Value Area calculation and usage: www.tradingview.com stockcharts.com onlinelibrary.wiley.com
อินดิเคเตอร์ Pine Script®
โดย RagingRocketBull
25
ST_Trend_ReversalSTRONG TREND REVERSAL INDICATOR The code is the percentage difference between the spot price of a given financial asset and its 200-day MA of that period. My standard setup is Daily, and I think it's got very good predictive power at that timeframe. It can be read in two ways: 1. Values extremely above or below the 200-period MA present chances of buying/selling agains the prevailing trend. 2. Values closely above or below the 200-period MA are make-or-break market periods, where a medium-term trend becomes evident. Breaks above or below the MA are associated with strong chances of directional movements. But it's not fool-proof as false breaks have become commonplace nowadays. Other way to use it is as confirmation of breakdowns: For example, an asset that loses its 200-day MA and then can't rally above it becomes exposed to steep losses afterwards. It's also helpful to use in volatility trading: the closer the asset goes to its MA, the lower goes implied vol, and thus better opportiunities to be long volatility on those occasions where direction is hard to predict. STRI = close/(200dMA) Values over 100 indicate percentage premiums of spot vs its moving average. Values below indicate percentage discounts of spot vs its moving average.
อินดิเคเตอร์ Pine Script®
โดย Daniel_Urdaneta
2
Ersoy-intersection(Kesisme)-Update-1website: www.ersoytoptas.com Newspaper : tr.investing.com hi , Friends i wanna be someone who wants to help everyone updated my script he published some time ago. What happened? * intersection When ever Bar Color Yellow Be * Alarms to be more comprehensible * Short and Long Days Choosing a Opportunities * Source Opportunities All Charts Usable( Example ;15,30,60 ... vs) and ALL MARKETS ( Stocks , forex , ... vs) i strive to improve further Easy to get
อินดิเคเตอร์ Pine Script®
โดย Lemnos
8
4H Bias: Previous Candle FocusStructural Bias Confirmation Checklist Has price broken a significant swing high/low on the 4HR? Has price held beyond this level for at least one complete 4HR candle? Does the candle anatomy (OHLC vs OLHC pattern) confirm directional intent? Are subsequent 4HR candles showing continued momentum in the bias direction? Has a liquidity sweep occurred into the previous structure before the continuation?
อินดิเคเตอร์ Pine Script®
โดย robertmarks478
Bitcoin vs. S&P 500 Performance Comparison**Full Description:** **Overview** This indicator provides an intuitive visual comparison of Bitcoin's performance versus the S&P 500 by shading the chart background based on relative strength over a rolling lookback period. **How It Works** - Calculates percentage returns for both Bitcoin and the S&P 500 (ES1! futures) over a specified lookback period (default: 75 bars) - Compares the returns and shades the background accordingly: - **Green/Teal Background**: Bitcoin is outperforming the S&P 500 - **Red/Maroon Background**: S&P 500 is outperforming Bitcoin - Displays a real-time performance difference label showing the exact percentage spread **Key Features** ✓ Rolling performance comparison using customizable lookback period (default 75 bars) ✓ Clean visual representation with adjustable transparency ✓ Works on any timeframe (optimized for daily charts) ✓ Real-time performance differential display ✓ Uses ES1! (E-mini S&P 500 continuous futures) for accurate comparison ✓ Fine-tuning adjustment factor for precise calibration **Use Cases** - Identify market regimes where Bitcoin outperforms or underperforms traditional equities - Spot trend changes in relative performance - Assess risk-on vs risk-off periods - Compare Bitcoin's momentum against broader market conditions - Time entries/exits based on relative strength shifts **Settings** - **S&P 500 Symbol**: Default ES1! (can be changed to SPX or other indices) - **Lookback Period**: Number of bars for performance calculation (default: 75) - **Adjustment Factor**: Fine-tune calibration to match specific data feeds - **Transparency Controls**: Customize background shading intensity - **Show/Hide Label**: Toggle performance difference display **Best Practices** - Use on daily timeframe for swing trading and position analysis - Combine with other momentum indicators for confirmation - Watch for color transitions as potential regime change signals - Consider using multiple timeframes for comprehensive analysis **Technical Details** The indicator calculates rolling percentage returns using the formula: ((Current Price / Price ) - 1) × 100, then compares Bitcoin's return to the S&P 500's return over the same period. The background color dynamically updates based on which asset is showing stronger performance.
อินดิเคเตอร์ Pine Script®
โดย gman1023
RCV Essentials════════════════════════════════════════════ RCV ESSENTIALS - MULTI-TIMEFRAME & SESSION ANALYSIS TOOL ════════════════════════════════════════════ 📊 WHAT THIS INDICATOR DOES This professional-grade indicator combines two powerful analysis modules: 1. TRADING SESSION TRACKER - Visualizes high/low ranges for major global market sessions (NY Open, London Open, Asian Session, etc.) 2. MULTI-TIMEFRAME CANDLE DISPLAY - Shows up to 8 higher timeframes simultaneously on your chart (15m, 30m, 1H, 4H, 1D, 1W, 1M, 3M) ════════════════════════════════════════════ 🎯 KEY FEATURES ════════════════════════════════════════════ TRADING SESSIONS MODULE: ✓ Track up to 6 custom trading sessions simultaneously ✓ Real-time high/low range detection during active sessions ✓ Pre-configured for NYO (7-9am), LNO (2-3am), Asian Session (4:30pm-12am) ✓ 60+ global timezone options ✓ Customizable colors, labels, and transparency ✓ Daily divider lines (optional Sunday skip for traditional markets) ✓ Only displays on ≤30m timeframes for optimal clarity MULTI-TIMEFRAME CANDLES MODULE: ✓ Display 1-8 higher timeframes with up to 10 candles each ✓ Real-time candle updates (non-repainting) ✓ Fully customizable colors (separate bullish/bearish for body/border/wick) ✓ Adjustable candle width, spacing, and positioning ✓ Smart label system (top/bottom/both, aligned or follow candles) ✓ Automatic timeframe validation (only shows TFs higher than chart) ✓ Memory-optimized with automatic cleanup ════════════════════════════════════════════ 🔧 HOW IT WORKS ════════════════════════════════════════════ TECHNICAL IMPLEMENTATION: Session Tracking Algorithm: • Detects session start/end using time() function with timezone support • Continuously monitors and updates high/low during active session • Finalizes range when session ends using var persistence • Draws boxes using real-time bar_index positioning • Maintains session ranges across multiple days for reference Multi-Timeframe System: • Uses ta.change(time()) detection to identify new MTF candle formation • Constructs candles using custom Type definitions (Candle, CandleSet, Config) • Stores OHLC data in arrays with automatic size management • Renders using box objects (bodies) and line objects (wicks) • Updates current candle every tick; historical candles remain static • Calculates dynamic positioning based on user settings (offset, spacing, width) Object-Oriented Architecture: • Custom Type "Candle" - Stores OHLC values, timestamps, visual elements • Custom Type "CandleSet" - Manages arrays of candles + settings per timeframe • Custom Type "Config" - Centralizes all display configuration • Efficient memory management via unshift() for new candles, pop() for old Performance Optimizations: • var declarations minimize recalculation overhead • Conditional execution (sessions only on short timeframes) • Maximum display limits prevent excessive object creation • Timeframe validation at barstate.isfirst reduces redundant checks ════════════════════════════════════════════ 📈 HOW TO USE ════════════════════════════════════════════ SETUP: 1. Add indicator to chart (works best on 1m-30m timeframes) 2. Open Settings → "Trading Sessions" group - Enable desired sessions (NYO, LNO, AS, or custom) - Select your timezone from 60+ options - Adjust colors and transparency 3. Open Settings → "Multi-TF Candles" group - Enable timeframes (TF1-TF8) - Configure each timeframe and display count - Customize colors and layout READING THE CHART: • Session boxes show high/low ranges during active sessions • MTF candles display to the right of current price • Labels identify each timeframe (15m, 1H, 4H, etc.) • Real-time updates on the most recent MTF candle TRADING APPLICATIONS: Session Breakout Strategy: → Identify session high/low (e.g., Asian session 16:30-00:00) → Wait for break above/below range → Confirm with higher timeframe candle close → Enter in breakout direction, stop at opposite side of range Multi-Timeframe Confirmation: → Spot setup on primary chart (e.g., 5m) → Verify 15m, 1H, 4H candles align with trade direction → Only take trades where higher TFs confirm → Exit when higher TF candles show reversal Combined Session + MTF: → Asian session establishes range overnight → London Open breaks Asian high → Confirm with bullish 15m + 1H candles → Enter long with stop below Asian high ════════════════════════════════════════════ 🎨 ORIGINALITY & INNOVATION ════════════════════════════════════════════ What makes this indicator original: 1. INTEGRATED DUAL-MODULE DESIGN Unlike separate session or MTF indicators, this combines both in a single performance-optimized script, enabling powerful correlation analysis between session behavior and timeframe structure. 2. ADVANCED RENDERING SYSTEM Uses custom Pine Script v5 Types with dynamic box/line object management instead of basic plot functions. This enables: • Precise visual control over positioning and spacing • Real-time updates without repainting • Efficient memory handling via automatic cleanup • Support for 8 simultaneous timeframes with independent settings 3. INTELLIGENT SESSION TRACKING The algorithm continuously recalculates ranges bar-by-bar during active sessions, then preserves the final range. This differs from static zone indicators that simply draw fixed boxes at predefined levels. 4. MODULAR ARCHITECTURE Custom Type definitions (Candle, CandleSet, Config) create extensible, maintainable code structure while supporting complex multi-timeframe operations with minimal performance impact. 5. PROFESSIONAL FLEXIBILITY Extensive customization: 6 configurable sessions, 8 timeframe slots, 60+ timezones, granular color/sizing/spacing controls, multiple label positioning modes—adaptable to any market or trading style. 6. SMART VISUAL DESIGN Automatic timeframe validation, dynamic label alignment options, and intelligent spacing calculations ensure clarity even with multiple timeframes displayed simultaneously. ════════════════════════════════════════════ ⚙️ CONFIGURATION OPTIONS ════════════════════════════════════════════ TRADING SESSIONS: • Session 1-6: On/Off toggles • Time Ranges: Custom start-end times • Labels: Custom text for each session • Colors: Individual color per session • Timezone: 60+ options (Americas, Europe, Asia, Pacific, Africa) • Range Transparency: 0-100% • Outline: Optional border • Label Display: Show/hide session names • Daily Divider: Dotted lines at day changes • Skip Sunday: For traditional markets vs 24/7 crypto MULTI-TF CANDLES: • Timeframes 1-8: Enable/disable individually • Timeframe Selection: Any TF (seconds to months) • Display Count: 1-10 candles per timeframe • Bullish Colors: Body/Border/Wick (independent) • Bearish Colors: Body/Border/Wick (independent) • Candle Width: 1-10+ bars • Right Margin: 0-200+ bars from edge • TF Spacing: Gap between timeframe groups • Label Color: Any color • Label Size: Tiny/Small/Normal/Large/Huge • Label Position: Top/Bottom/Both • Label Alignment: Follow Candles or Align ════════════════════════════════════════════ 📋 TECHNICAL SPECIFICATIONS ════════════════════════════════════════════ • Pine Script Version: v5 • Chart Overlay: True • Max Boxes: 500 • Max Lines: 500 • Max Labels: 500 • Max Bars Back: 5000 • Update Frequency: Real-time (every tick) • Timeframe Compatibility: Chart TF must be lower than selected MTFs • Session Display: Activates only on ≤30 minute timeframes • Memory Management: Automatic cleanup via array operations
อินดิเคเตอร์ Pine Script®
โดย RCVisionaries
Third eye • StrategyThird eye • Strategy – User Guide 1. Idea & Concept Third eye • Strategy combines three things into one system: Ichimoku Cloud – to define market regime and support/resistance. Moving Average (trend filter) – to trade only in the dominant direction. CCI (Commodity Channel Index) – to generate precise entry signals on momentum breakouts. The script is a strategy, not an indicator: it can backtest entries, exits, SL, TP and BreakEven logic automatically. 2. Indicators Used 2.1 Ichimoku Standard Ichimoku settings (by default 9/26/52/26) are used: Conversion Line (Tenkan-sen) Base Line (Kijun-sen) Leading Span A & B (Kumo Cloud) Lagging Span is calculated but hidden from the chart (for visual simplicity). From the cloud we derive: kumoTop – top of the cloud under current price. kumoBottom – bottom of the cloud under current price. Flags: is_above_kumo – price above the cloud. is_below_kumo – price below the cloud. is_in_kumo – price inside the cloud. These conditions are used as trend / regime filters and for stop-loss & trailing stops. 2.2 Moving Average You can optionally display and use a trend MA: Types: SMA, EMA, DEMA, WMA Length: configurable (default 200) Source: default close Filter idea: If MA Direction Filter is ON: When Close > MA → strategy allows only Long signals. When Close < MA → strategy allows only Short signals. The MA is plotted on the chart (if enabled). 2.3 CCI & Panel The CCI (Commodity Channel Index) is used for entry timing: CCI length and source are configurable (default length 20, source hlc3). Two thresholds: CCI Upper Threshold (Long) – default +100 CCI Lower Threshold (Short) – default –100 Signals: Long signal: CCI crosses up through the upper threshold cci_val < upper_threshold and cci_val > upper_threshold Short signal: CCI crosses down through the lower threshold cci_val > lower_threshold and cci_val < lower_threshold There is a panel (table) in the bottom-right corner: Shows current CCI value. Shows filter status as colored dots: Green = filter enabled and passed. Red = filter enabled and blocking trades. Gray = filter is disabled. Filters shown in the panel: Ichimoku Cloud filter (Long/Short) Ichimoku Lines filter (Conversion/Base vs Cloud) MA Direction filter 3. Filters & Trade Direction All filters can be turned ON/OFF independently. 3.1 Ichimoku Cloud Filter Purpose: trade only when price is clearly above or below the Kumo. Long Cloud Filter (Use Ichimoku Cloud Filter) – when enabled: Long trades only if close > cloud top. Short Cloud Filter – when enabled: Short trades only if close < cloud bottom. If the cloud filter is disabled, this condition is ignored. 3.2 Ichimoku Lines Above/Below Cloud Purpose: stronger trend confirmation: Ichimoku lines should also be on the “correct” side of the cloud. Long Lines Filter: Long allowed only if Conversion Line and Base Line are both above the cloud. Short Lines Filter: Short allowed only if both lines are below the cloud. If this filter is OFF, the conditions are not checked. 3.3 MA Direction Filter As described above: When ON: Close > MA → only Longs. Close < MA → only Shorts. 4. Anti-Re-Entry Logic (Cloud Touch Reset) The strategy uses internal flags to avoid continuous re-entries in the same direction without a reset. Two flags: allowLong allowShort After a Long entry, allowLong is set to false, allowShort to true. After a Short entry, allowShort is set to false, allowLong to true. Flags are reset when price touches the Kumo: If Low goes into the cloud → allowLong = true If High goes into the cloud → allowShort = true If Close is inside the cloud → both allowLong and allowShort are set to true There is a key option: Wait Position Close Before Flag Reset If ON: cloud touch will reset flags only when there is no open position. If OFF: flags can be reset even while a trade is open. This gives a kind of regime-based re-entry control: after a trend leg, you wait for a “cloud interaction” to allow new signals. 5. Risk Management All risk management is handled inside the strategy. 5.1 Position Sizing Order Size % of Equity – default 10% The strategy calculates: position_value = equity * (Order Size % / 100) position_qty = position_value / close So position size automatically adapts to your current equity. 5.2 Take Profit Modes You can choose one of two TP modes: Percent Fibonacci 5.2.1 Percent Mode Single Take Profit at X% from entry (default 2%). For Long: TP = entry_price * (1 + tp_pct / 100) For Short: TP = entry_price * (1 - tp_pct / 100) One strategy.exit per side is used: "Long TP/SL" and "Short TP/SL". 5.2.2 Fibonacci Mode (2 partial TPs) In this mode, TP levels are based on a virtual Fib-style extension between entry and stop-loss. Inputs: Fib TP1 Level (default 1.618) Fib TP2 Level (default 2.5) TP1 Share % (Fib) (default 50%) TP2 share is automatically 100% - TP1 share. Process for Long: Compute a reference Stop (see SL section below) → sl_for_fib. Compute distance: dist = entry_price - sl_for_fib. TP levels: TP1 = entry_price + dist * (Fib TP1 Level - 1) TP2 = entry_price + dist * (Fib TP2 Level - 1) For Short, the logic is mirrored. Two exits are used: TP1 – closes TP1 share % of position. TP2 – closes remaining TP2 share %. Same stop is used for both partial exits. 5.3 Stop-Loss Modes You can choose one of three Stop Loss modes: Stable – fixed % from entry. Ichimoku – fixed level derived from the Kumo. Ichimoku Trailing – dynamic SL following the cloud. 5.3.1 Stable SL For Long: SL = entry_price * (1 - Stable SL % / 100) For Short: SL = entry_price * (1 + Stable SL % / 100) Used both for Percent TP mode and as reference for Fib TP if Kumo is not available. 5.3.2 Ichimoku SL (fixed, non-trailing) At the time of a new trade: For Long: Base SL = cloud bottom minus small offset (%) For Short: Base SL = cloud top plus small offset (%) The offset is configurable: Ichimoku SL Offset %. Once computed, that SL level is fixed for this trade. 5.3.3 Ichimoku Trailing SL Similar to Ichimoku SL, but recomputed each bar: For Long: SL = cloud bottom – offset For Short: SL = cloud top + offset A red trailing SL line is drawn on the chart to visualize current stop level. This trailing SL is also used as reference for BreakEven and for Fib TP distance. 6. BreakEven Logic (with BE Lines) BreakEven is optional and supports two modes: Percent Fibonacci Inputs: Percent mode: BE Trigger % (from entry) – move SL to BE when price goes this % in profit. BE Offset % from entry – SL will be set to entry ± this offset. Fibonacci mode: BE Fib Level – Fib level at which BE will be activated (default 1.618, same style as TP). BE Offset % from entry – how far from entry to place BE stop. The logic: Before BE is triggered, SL follows its normal mode (Stable/Ichimoku/Ichimoku Trailing). When BE triggers: For Long: New SL = max(current SL, BE SL). For Short: New SL = min(current SL, BE SL). This means BE will never loosen the stop – only tighten it. When BE is activated, the strategy draws a violet horizontal line at the BreakEven level (once per trade). BE state is cleared when the position is closed or when a new position is opened. 7. Entry & Exit Logic (Summary) 7.1 Long Entry Conditions for a Long: CCI signal: CCI crosses up through the upper threshold. Ichimoku Cloud Filter (optional): If enabled → price must be above the Kumo. Ichimoku Lines Filter (optional): If enabled → Conversion Line and Base Line must be above the Kumo. MA Direction Filter (optional): If enabled → Close must be above the chosen MA. Anti-re-entry flag: allowLong must be true (cloud-based reset). Position check: Long entries are allowed when current position size ≤ 0 (so it can also reverse from short to long). If all these conditions are true, the strategy sends: strategy.entry("Long", strategy.long, qty = calculated_qty) After entry: allowLong = false allowShort = true 7.2 Short Entry Same structure, mirrored: CCI signal: CCI crosses down through the lower threshold. Cloud filter: price must be below cloud (if enabled). Lines filter: conversion & base must be below cloud (if enabled). MA filter: Close must be below MA (if enabled). allowShort must be true. Position check: position size ≥ 0 (allows reversal from long to short). Then: strategy.entry("Short", strategy.short, qty = calculated_qty) Flags update: allowShort = false allowLong = true 7.3 Exits While in a position: The strategy continuously recalculates SL (depending on chosen mode) and, in Percent mode, TP. In Fib mode, fixed TP levels are computed at entry. BreakEven may raise/tighten the SL if its conditions are met. Exits are executed via strategy.exit: Percent mode: one TP+SL exit per side. Fib mode: two partial exits (TP1 and TP2) sharing the same SL. At position open, the script also draws visual lines: White line — entry price. Green line(s) — TP level(s). Red line — SL (if not using Ichimoku Trailing; with trailing, the red line is updated dynamically). Maximum of 30 lines are kept to avoid clutter. 8. How to Use the Strategy Choose market & timeframe Works well on trending instruments. Try crypto, FX or indices on H1–H4, or intraday if you prefer more trades. Adjust Ichimoku settings Keep defaults (9/26/52/26) or adapt to your timeframe. Configure Moving Average Typical: EMA 200 as a trend filter. Turn MA Direction Filter ON if you want to trade only with the main trend. Set CCI thresholds Default ±100 is classic. Lower thresholds → more signals, higher noise. Higher thresholds → fewer but stronger signals. Enable/disable filters Turn on Ichimoku Cloud and Ichimoku Lines if you want only “clean” trend trades. Use Wait Position Close Before Flag Reset to control how often re-entries are allowed. Choose TP & SL mode Percent mode is simpler and easier to understand. Fibonacci mode is more advanced: it aligns TP levels with the distance to stop, giving asymmetric RR setups (two partial TPs). Choose Stable SL for fixed-risk trades, or Ichimoku / Ichimoku Trailing to tie stops to the cloud structure. Set BreakEven Enable BE if you want to lock in risk-free trades after a certain move. Percent mode is straightforward; Fib mode keeps BreakEven in harmony with your Fib TP setup. Run Backtest & Optimize Press “Add to chart” → go to Strategy Tester. Adjust parameters to your market and timeframe. Look at equity curve, PF, drawdown, average trade, etc. Live / Paper Trading After you’re satisfied with backtest results, use the strategy to generate signals. You can mirror entries/exits manually or connect them to alerts (if you build an alert-based execution layer).
กลยุทธ์ Pine Script®
โดย RezzoRedPriest
Student Wyckoff Target Shooter **Target Shooter — Equal Move Target Tool (Larry Williams idea)** **1. What this indicator does** Target Shooter is a tool that measures the last meaningful price swing and projects an **equal move target** in the direction of the breakout. The logic is simple: * The market makes a move from point A to point B (a swing high to a swing low, or vice versa). * Then price breaks out above or below this swing range. * Target Shooter takes the size of that swing and **adds it in the direction of the breakout**, showing a logical **price target zone** where the move may: * slow down, * react, * or potentially reverse. This is a practical implementation of the “Equal Moves” idea often referenced by Larry Williams. --- **2. Core idea (example)** Example from the classic explanation: * Price drops from **80 down to 20** → the move is **60 points**. * The swing range is now: **High = 80, Low = 20**. * Later, price **breaks above 80**. Target Shooter assumes: > “If the market could move 60 points in one direction, after a breakout it may travel another 60 points in the opposite direction.” So the upside target becomes: * Move size: 80 − 20 = 60 * Breakout above 80 * **Target = 80 + 60 = 140** The indicator finds such swings automatically and draws: * **UT (Upper Target)** on upside breakouts * **DT (Down Target)** on downside breakouts --- **3. What you see on the chart** 1. **Target lines** * When price breaks **above** a previous swing range, the indicator plots a horizontal **UT (Upper Target)** line — the projected equal move target. * When price breaks **below** the previous swing range, it plots a **DT (Down Target)** line — the downside target. * Each line is drawn from the breakout bar and extended to the right for a user-defined number of bars. 2. **Price labels** * A small label “UT” or “DT” is shown at the end of the line with the exact target price. * This makes it easy to see where the projected target is without checking the scale. 3. **Optional swing range (debug view)** * There is an option to display the **swing range** that the target is based on (similar to a Donchian channel on previous bars). * This shows the upper (swing high) and lower (swing low) boundaries the indicator used to define the last move. --- **4. Key inputs (plain language)** * **Swing window length (bars)** How many bars back the indicator looks to find the last meaningful swing (highest high and lowest low). This is like the length of a Donchian channel used to define the previous range. Smaller values → more frequent, shorter targets. Larger values → bigger swings and more distant targets. * **Minimum move size (in ticks)** This is a noise filter. If the distance between the swing high and swing low is smaller than this threshold, no targets are drawn. The indicator will only react to moves that are big enough to matter for your trading. * **Breakout type: Close vs High/Low** * **Breakout by Close**: The target appears only when the **bar closes** above/below the swing range. More conservative and fewer false signals. * **Breakout by High/Low**: The target appears as soon as the **high** or **low** of the bar breaks the swing range. Faster and more aggressive, but more sensitive to noise. * **Target line length (bars)** How far to the right the UT/DT lines should be extended. Shorter length → local target zones. Longer length → important levels visible far into the future. * **Appearance settings** * Separate color, width and style for **UT** and **DT** lines. * Option to show or hide labels with price and “UT/DT” text. --- **5. How to use Target Shooter in trading** > Important: this is **not** an entry signal indicator. > Target Shooter is a **targeting and context tool**, not a standalone system. Typical uses: 1. **Planning take-profit zones** * You already have an entry signal from your own strategy (Wyckoff, Larry Williams patterns, levels, volume, whatever you use). * Target Shooter shows a **logical equal move target** where the current wave can reasonably “shoot”. * You can: * place your main take-profit around the target, * scale out part of the position, * tighten stops when price approaches the target. 2. **Finding potential reaction / reversal areas** * Equal move targets often act as **zones of interest**. * If price reaches a UT/DT level and then shows weakness/absorption/volume spikes or reversal candles, this might be a good place to take profits or look for counter-trend opportunities (for experienced traders). 3. **Assessing trend strength** * If price **easily exceeds** the equal move target and keeps going without any reaction, it suggests a very strong trend. * If price **fails to reach** the target and reverses early, the move is weaker than expected. --- **6. Timeframes** Target Shooter can be used on: * **Intraday** (M5, M15, M30, H1) — for shorter-term targets within the day, * **Higher timeframes** (H4, D1 and above) — for swing and position trades. General rule: The **higher the timeframe and the larger the swing**, the **more important** the target level tends to be. --- **7. Notes and limitations** * The indicator does **not** predict the future. It simply projects a geometric equal move from the last swing. * It should be combined with your own trading framework: * support/resistance, * Wyckoff / VSA, * trend tools, * volume/flow, etc. * Always keep proper risk management. A target is a **scenario**, not a guarantee. .
อินดิเคเตอร์ Pine Script®
โดย StudentWyckoff
2
INDIVIDUAL ASSET BIAS DASHBOARD V3Strategy Name: Individual Asset Bias Dashboard V3 Author Concept: Multi-timeframe 3-pivot alignment bias monitor Timeframe: Works on any chart, but bias is calculated on daily close vs higher timeframe pivots Core Idea (3-Pivot Rule) For each asset we compare the current daily closing level against three classic pivots from higher timeframes: Previous Weekly pivot: (H+L+C)/3 of last completed week Previous Monthly pivot: (H+L+C)/3 of last completed month Previous 3-Monthly pivot: (H+L+C)/3 of last completed quarter Bias Logic: BULL → Price is above all three pivots BEAR → Price is below all three pivots MIXED → Price is in between (no clear alignment) This is a clean, objective, and widely used institutional method to gauge short-term momentum alignment across multiple horizons. Assets Tracke SymbolMeaningSPX500S&P 500 IndexVIXVolatility IndexDXYUS Dollar IndexBTCUSDBitcoinXAUUSDGoldUSOILWTI Crude OilUS10Y10-Year US Treasury YieldUSDJPYJapanese Yen pair Key Features Real-time updating table in the bottom-left corner Color coding: Lime = Bullish, Red = Bearish, Gray = Mixed Optional "Change" column showing flips (▲/▼) when bias changes day-over-day No repainting on closed daily bars (critical for reliability) Compliant with TradingView rules (proper lookahead usage explained below) Important Technical Notes (Why No Repainting) lookahead = barmerge.lookahead_on is used only for higher-timeframe historical pivots → allowed and standard practice Current price uses lookahead = barmerge.lookahead_off → reflects actual tradable daily close Table only draws on barstate.islastconfirmedhistory or barstate.islast → prevents false signals on realtime bar Limitations & Warnings On intraday charts, the "current bias" updates with every tick using the running daily close Bias can flip intraday before daily bar closes On daily or higher charts, the dashboard is 100% confirmation-based and non-repainting This is a bias filter, not a standalone trading system
อินดิเคเตอร์ Pine Script®
โดย TokyoTrader101
WSMR v3.8 — WhaleSplash → Mean Reversal# WSMR v3.8 — WhaleSplash → Mean Reversal ### Global, Anchored, Non-Repainting Signal Framework for Futures, Crypto & Index Markets **WSMR v3.8** is a volatility-anchored market-structure framework designed to detect two high-probability turning points: ## 1️⃣ WhaleSplash (WS) — Short Impulse Exhaustion A “WhaleSplash” is a large downside impulse characterised by: - bar range ≥ *k × ATR* - strong % move - volume expansion vs SMA(20) - deep Z-Score oversold - compression away from VWAP - RSI weakness When these conditions align, the indicator marks a short exhaustion event and prints a 🐋 icon below the bar. This is a **non-repainting bar-close confirmation**. --- ## 2️⃣ Mean Reversal (MR) — Bullish Reversal Setup The MR module combines: - RSI bullish divergence (pivot-based, safe) - Z-Score reset above threshold - SMA20 reclaim with positive slope - Higher-low structure When confirmed at bar-close, the indicator identifies conditions favourable for a **mean-reversion long**. MR signals can optionally trigger an “**1st green candle after MR**” confirmation within a user-defined TTL (default 12 bars). --- # 🎯 Key Features ### ✔ Non-Repainting Confirmed Signals WS & MR only fire **after** bar close, using cooldown logic to avoid clustering and noise. ### ✔ VWAP-Anchored Z-Score Framework All signals reference price distance and statistical deviation from VWAP, producing adaptive, volatility-aware setups. ### ✔ Session Filter (Asia-Optimised) Optional session gating allows signals only between **23:00–09:00 UTC**, ideal for systematic Asia-session breakout & mean-reversion traders. ### ✔ Volatility Monitor (Normal → Extreme) Dynamic volatility classification using: - ATR baseline ratio - wickiness index - range Z-Score States: **Normal → Wicky → Spiky → Extreme** Displayed with colour-coded background in the status panel. ### ✔ Rolling WhaleSplash Frequency (Analytics Panel) WSMR tracks the frequency of WhaleSplash events over a rolling window (Bars/Days/Weeks/Months) and estimates average WS/day (on minute timeframes). ### ✔ Status Panel (Bottom-Right) Live display of: - Mode (Global/Asia) - Timeframe + TTL status - WhaleSplash frequency - Volatility state - ATR/Range information --- # 📌 Best Timeframes Optimised and validated on **5-minute charts**, but compatible with all intraday timeframes. --- # 🚨 Alerts Included - WhaleSplash SHORT - WhaleSplash LONG - Volatility Warning (Spiky/Extreme) --- # ⚠️ Notes WSMR v3.8 is not a buy/sell system. It is a **signal framework** highlighting exhaustion and reversal conditions. Always combine with market structure, session context, and risk management. Past performance does not guarantee future results. --- # 💬 Credits Script created by **John Nolan (JohnFrancisNolan)** Pine Script® v6 © 2024–2025 — Published under the **Mozilla Public License 2.0**
อินดิเคเตอร์ Pine Script®
โดย JohnFrancisNolan
Thirdeyechart Gold DoomsdayThirdeyechart Gold Doomsday – Full Description Thirdeyechart Gold Simulation Final 3 is a professional-grade TradingView indicator designed to monitor the global gold market across multiple XAU pairs simultaneously. This version is engineered to provide a complete, multi-timeframe view of gold’s momentum while incorporating buy/sell simulation, trend strength, and safe/unsafe trade detection, all in a clean, visually organized table. Key Functions and Features Custom Pairs Input Traders can specify any number of XAU-related pairs using a comma-separated input. The script dynamically handles all pairs without requiring manual adjustments. Percent Change Function (f_change) Calculates the percentage change for a given symbol and timeframe: pct_change = ((close_tf - open_tf) / open_tf) * 100 Supports weekly (W), daily (D), 4-hour (H4), and 1-hour (H1) timeframes. Positive changes are colored blue, negative changes red for instant visual assessment. Table Setup Dynamically generates a table based on the number of XAU pairs. Displays Symbol, Week %, Day %, H4 %, H1 %, BuySim, SellSim in a clean, boxed format. Color-coded cells for easy recognition of positive vs negative momentum. Buy & Sell Simulation Separates each timeframe into positive (buy) and negative (sell) contributions: Positive value → added to BuySim Negative value → added to SellSim Summed across all timeframes per symbol, allowing a macro-level simulation of market pressure. Total BuySim / SellSim provides a clear view of dominance without signaling actual trades. Total Row Calculation Sums Week, Day, H4, H1 across all symbols to show aggregate market movement. BuySim and SellSim totals highlight overall market pressure. Provides context for trend alignment across multiple pairs. Strength Row (f_strength) Interprets total movement per timeframe: >0 → Strong <0 → Weak 0 → Neutral Combined with BuySim/SellSim to display a trend bias: “Buy Bias” or “Sell Bias.” Safe / Unsafe Trade Detection Compares total BuySim and SellSim: distance = abs(totalBuy - totalSell) threshold = totalAll * 0.50 Trade considered safe if distance ≥ threshold → green label. Trade considered unsafe if distance < threshold → red label. Provides a reasoning context (e.g., “clear dominance by buyers” or “sellers can dominate the market”), allowing quick risk assessment. This function ensures traders know whether market momentum is decisive or uncertain. Visual Design Uses background colors for header, cells, total, and strength rows to improve readability. All data is organized in a compact, easy-to-read table, with dynamic scaling depending on the number of pairs. Why This Indicator is Advanced Multi-Timeframe Analysis: Simultaneously monitors W, D, H4, H1 for each XAU pair. Global Perspective: Shows aggregated momentum across 8 gold pairs to track overall market direction. Risk Awareness: Safe/Unsafe trade detection helps identify strong trends versus indecisive conditions. Institutional Approach: Combines global data and technical calculation similar to professional trading terminals. Disclaimer This indicator is educational and analytical only. It does not provide financial advice or direct trade signals. Users are responsible for their own trading decisions, and all markets carry risk. © 2025 Thirdeyechart. All rights reserved. Redistribution or commercial use without permission is prohibited.
อินดิเคเตอร์ Pine Script®
โดย Spiderweb11
Atlas 8 Currency Session Momentum (6H, London)This indicator calculates real-time currency strength for the 8 major currencies (USD, EUR, GBP, JPY, AUD, NZD, CAD, CHF) using a balanced multi-pair engine and a 6-hour momentum reset. 🔍 How it works The indicator computes the relative strength of each currency by averaging the percentage change of 7 major cross-pairs for each currency. A currency's value increases when pairs where it is the base appreciate, and decreases when pairs where it is the quote depreciate. This creates a symmetric and stable strength calculation similar to institutional relative-value models. 🕒 Session-based Momentum Reset The global trading day is split into 4 × 6-hour blocks: • 00:00–06:00 Tokyo • 06:00–12:00 London • 12:00–18:00 New York • 18:00–24:00 Late US/Asia pre-open At each new 6-hour session, all strength lines reset to 0. This highlights fresh intraday momentum generated by liquidity transitions between sessions. 🎯 What the indicator shows • Relative strength of all 8 currencies • Smooth momentum curves using EMA smoothing • Vertical dividers at each new session • Background color for each session • Real intraday build-up of strength/weakness (not cumulative from previous day) This tool is designed for intraday traders who follow cross-currency momentum during session transitions (Tokyo → London → NY). 🧭 How to use it • Look for the strongest vs weakest currency after each session reset • Identify fresh trends during London and NY opens • Confirm currency-pair bias using strength divergence • Track momentum exhaustion when lines flatten or converge
อินดิเคเตอร์ Pine Script®
โดย pettorossimarco85