Ultimate Moving Average Package (17 MA's)Included is the:
VWAP
Current time frame 10 EMA
Current time frame 20 EMA
Current time frame 50 EMA
Current time frame 10 SMA
Current time frame 20 SMA
Current time frame 50 SMA
Daily 10 EMA
Daily 20 EMA
Daily 50 EMA
Daily 50 SMA
Daily 100 SMA
Daily 200 SMA
Weekly 100 SMA
Weekly 200 SMA
Monthly 100 SMA
Monthly 200 SMA
All Daily/Weekly/Monthly MA's can be seen on intraday charts. Current time frame MA's change depending on your time frame. Obviously you dont need all 17 on your chart but you can pick the ones you like and disable the rest.
ค้นหาในสคริปต์สำหรับ "北证50指数的股票交易方式"
OVL_Kikoocycle Beta_Pine3This script use :
- A custom Chande Kroll Stop for generate the channel
- Some custom Parabolic S.A.R for generate cycles
This script can be separated into 3 categories:
- Channel Kroll generator : one layer for the actual interval and a layer for a Large Timeframe .(with ratio)
- "Range" generator : one layer for actual Interval and a layer for a Large Timeframe.(with automique ratio)
-Targets generator : one layer for actual interval with different trend.
"Channel Kroll" :
- I "hijack" the Chande Kroll Stop formula with custom parameters for generate this channel. Overall, it works like other types of channels like BB, etc... A midline and two borders. The thickness of the borders are relatively important here. A thick border shows some resistance of the area. And so the probability of seeing the market return to its first contact is stronger. While a very thin and vertical border would rather play the role of a breach, a bit like the idea of gaps. Often the market seems to want to go after several cycles.
You can activate its Large TimeFrame version, its midline is strong and fine borders helps to judge the risk.
SARget + "SAR Limited" :
- (S.A.R + targets) The philosophy of this function is simple... When a small cycle is broken, it creates a mark on a higher cycle. So on until the SAR called "SAR Limited". For simplicity, imagine a fractal image but inverted ... Break the small figure, it will mark the larger figure at this time but to get there you still have to make the way to the small figure.
Targets are : cross ("+") for fast targets(hidden by default because, theire work only on lower interval), squares (for medium trend), Xcross(for large trend) and red cross(they try to find a large contexte). When a target proc, it is for later (market need some cycles for going to, but it is relative to your interval). This gives you speculative goals.
Why 2 targets for a same type and a triangle with a 90deg angle : This give a potential area for management.The triangle help to visualize the SAR and to juge the market reaction. You need to adapte your trade with that...
Targets may be slightly too far because I am a bad coder... Currently the targets appear at the moment of rupture but it would be necessary to wait for the end of the breaking movement. Which can bring a positional error if the break is violent.
RnG and LTF RnG :
- Attempt to generate a Fibo range for each cycle and see interressing areas to enter or exit. This is played with the same philosophy as the Fibo extensions and retracement.
When a new RnG is generated, do not rush. It appears showing 50/50 for both sides. When a new RnG is generated, do not rush. It appears showing 50/50 for both sides. As long as the market is out of the middle zone (the 3 lines) keep in mind the past RnG.
When the market is out of range, you can use the FibRetracement tool for have extensions. One point at each end, as on the presentation graph. (Values 1.14, 1.272, 1.414, 1.618, 1.786, 2, 2.4 and 4 work well.) If too extrem you can active the LTF version.
Never fomo a break, market like to pull a level... Observe and be patient.
It's easier to use than to explain xD
NB : Do not use the LTF as context. For this, it is better to look at a higher interval.
I invite you to look in the style tab of the script and deselect the plots named UNCHECKEME, this will ease your browser.
Amazing Crossover System - 100+ pips per day!I got the main concept for this system on another site. While I have made one important change, I must stress that the heart of this system was created by someone else! We must give credit where credit is due!
Y'all know baby pips. @ForexPhantom published about this system and did both back and forward test around 10 years ago.
I found it on the sit and now I put it to code to see how it performs. I assume 10 points spread for every trade. I use Renesource or AxiTrader to get the low spreads.
There are 2 mods, the single trades and constant trading on the direction.
Main concept
Indicators
5 EMA -- YELLOW
10 EMA -- RED
RSI (10 - Apply to Median Price: HL/2) -- One level at 50.
TIME FRAME
1 Hour Only (very important!)
PAIRS
Virtually any pair seems to work as this is strictly technical analysis.
I recommend sticking to the main currencies and avoiding cross currencies (just his preference).
WHEN TO ENTER A TRADE
Enter LONG when the Yellow EMA crosses the Red EMA from underneath.
RSI must be approaching 50 from the BOTTOM and cross 50 to warrant entry.
Enter SHORT when the Yellow EMA crosses the Red EMA from the top.
RSI must be approaching 50 from the TOP and cross 50 to warrant entry.
I've attached a picture which demonstrates all these conditions.
That's it!
f.bpcdn.co
MFIww MFI/RSI_v2[wozdux]A new version of the indicator Mfi_v2. Added new control parameters.
tt - the averaging period of the volume.
Len - the period for calculating the MPI.
nn-averaging period MFI (blue line). level-critical levels from below and above (black horizontal lines).
Level 0 or 50 - switch between different histogram views with the middle at either level 50 or level 0.
key level-key to remove black critical levels.
key ema (MFI, nn) - key to remove mfi averaging (blue line).
key color-key to remove histogram coloring.
key colomns a-line - key switching modes represent the mfi histrogram or line.
---------------------------
Новая версия индикатора MFIww_v2. Добавлены новые управляющие параметры.
tt- период усреднения объема.
Len - период вычисления MFI.
nn- период усреднения MFI (голубая линия).
level- критические уровни снизу и сверху (черные горизонтальные линии).
Level 0 or 50 - переключение между разными представлениями гистрограммы с серединой либо на уровне 50 , либо на уровне 0.
key level- ключ убрать черные критические уровни.
key ema(mfi,nn) - ключ убрать усреднение mfi (голубая линия).
key color- ключ убрать расцветку гистрограммы.
key colomns-line - ключ переключения режимов представления mfi гистрограммой или линией.
GoTiT|Simple Auto Fib v1.0Simple Auto Fib!
Notes:
1. Always set the trend manually! Don't rely on the auto trend detection.
2. The first parameter Length sets the number of candles back (left) to search for highs and lows from the current candle.
3. The High Offset parameter sets the number of candles back (left) to ignore/skip before searching for highs.
4. The Low Offset parameter sets the number of candles back (left) to ignore/skip before searching for lows.
5. The offset parameters change the behavior of the Length parameter.
Example 1:
Length = 100
High Offset = 0
Low Offset = 0
This is the default behavior, and the search for highs and lows occurs on the last 100 candles.
Example 2:
Length = 50
High Offset = 20 (Ignore the last 20 candles, and search for highs starting at candle 21 to 71 (or 50 candles back)
Low Offset = 15 (Ignore the last 15 candles, and search for lows starting at candle 16 to 66 (or 50 candles back)
In example 2, search starts on candle 21 for highs, and candle 16 for lows and extends 50 candles further back from there.
6. The Trend Detection parameter sets the number of candles back (left) to use in the trend calculations. Larger values give better "marco trend" detection. Smaller values give better "micro trend" detection. See note #1.
7. The white fib line is fib0. Assuming you correctly set the trend manually (or the trend is auto detected correctly), in a downtrend fib0 should be bellow the red fib line, and in an uptrend fib0 should be above the red fib line.
MACD + Stochastic + RSI (Long + Short)My strategy uses a combination of three indicators MACD Stochastic RSI .
The Idea is to GO LONG when ( MACD > Signal and RSI > 50 and Stochastic > 50) occures at the same time
and GO SHORT when ( MACD < Signal and RSI < 50 and Stochastic < 50)
This strategy works well on futures and stocks especially during market breaking up after consolidation
The best results are on Daily charts , so its NOT a scalping strategy. But it can work also on 1H charts.
The strategy does not have any stops and profit targets, so we can take all the market can give us at the moment.
The exit point only when MACD goes under/over Signal line
Its Preformance is quite stable.
So, use it, trade it.
If it will help you to imprive your trading results, please donate me
BTC: 12kd1F8buWisUBdq27BBwRkUvzW7Ey3og5
Trend Lines and MoreMulti-Indicator consisting of several useful indicators in a single package.
TREND LINES
-By default the 20 SMA and 50 SMA are shown.
-Use "MOVING AVERAGE TYPE" to select SMA, EMA, Double-EMA, Triple-EMA, or Hull.
-Use "50 MA TREND COLOR" to have the 50 turn green/red for uptrend/downtrend.
-Use "DAILY SOURCE ONLY" to always show daily averages regardless of timeframe.
-Use "SHOW LONG MA" to also include 100, 150, and 200 moving averages.
-Use "SHOW MARKERS" to show a small colored marker identifying which line is which.
OTHER INDICATORS
-You can show Bollinger Bands and Parabolic SAR.
-You can highlight key reversal times (9:50-10:10 and 14:40-15:00).
-You can show price offset markers, where was the price "n" periods ago.
That last one is useful to show the level of prices which are about to "fall off" the moving average
and be replaced with current price. So for example, if current price is significantly below the
200-days-ago price, you can gauge the difficulty for the 200 MA to start climbing again.
Multi SMA EMA WMA HMA BB (4x3 MAs Bollinger Bands) Pro MTF - RRBMulti SMA EMA WMA HMA 4x3 Moving Averages with Bollinger Bands Pro MTF by RagingRocketBull 2018
Version 1.0
This indicator shows multiple MAs of any type SMA EMA WMA HMA etc with BB and MTF support, can show MAs as dynamically moving levels.
There are 4 MA groups + 1 BB group. You can assign any type/timeframe combo to a group, for example:
- EMAs 50,100,200 x H1, H4, D1, W1 (4 TFs x 3 MAs x 1 type)
- EMAs 8,13,21,55,100,200 x M15, H1 (2 TFs x 6 MAs x 1 type)
- D1 EMAs and SMAs 12,26,50,100,200,400 (1 TF x 6 MAs x 2 types)
- H1 WMAs 7,77,231; H4 HMAs 50,100,200; D1 EMAs 144,169,233; W1 SMAs 50,100,200 (4 TFs x 3 MAs x 4 types)
- +1 extra MA type/timeframe for BB
compile time: 25-30 sec
full redraw time after parameter change in UI: 3 sec
There are several versions: Simple, MTF, Pro MTF, Advanced MTF and Ultimate MTF. This is the Pro MTF version. The Differences are listed below. All versions have BB
- Simple: you have 2 groups of MAs that can be assigned any type (5+5)
- MTF: +2 custom Timeframes for each group (2x5 MTF)
- Pro MTF: +4 custom Timeframes for each group (4x3 MTF), MA levels and show max bars back options
- Advanced MTF: +2 extra MAs/group (4x5 MTF), custom Ticker/Symbol, backreferences for type, TF and MA lengths in UI
- Ultimate MTF: +individual settings for each MA, custom Ticker/Symbols
Features:
- 4x3 = 12 MAs of any type including Hull Moving Average (HMA)
- 4x MTF groups with step line smoothing
- BB +1 extra TF/type for BB MAs
- 12 MA levels with adjustable group offsets, indents and shift
- show max bars back
- you can show/hide both groups of MAs/levels and individual MAs
Notes:
1. based on 3EmaBB, uses plot*, barssince and security functions
2. you can't set certain constants from input due to Pinescript limitations - change the code as needed, recompile and use as a private version
3. Levels = trackprice implementation
4. Show Max Bars Back = show_last implementation
5. uses timeframe textbox instead of input resolution to allow for 120 240 and other custom TFs. Also supports TFs in hours: 2H or H2
6. swma has a fixed length = 4, alma and linreg have additional offset and smoothing params
7. Smoothing is applied by default for visual aesthetics on MTF. To use exact ma mtf values (lines with stair stepping) - disable it
MTF Notes:
- uses simple timeframe textbox instead of input resolution dropdown to allow for 120, 240 and other custom TFs, also supports timeframes in H: 2H, H2
- Groups that are not assigned a Custom TF will use Current Timeframe (0).
- MTF will work for any MA type assigned to the group
- MTF works both ways: you can display a higher TF MA/BB on a lower TF or a lower TF MA/BB on a higher TF.
- MTF MA values are normally aligned at the boundary of their native timeframe. This produces stair stepping when a higher TF MA is viewed on a lower TF.
Therefore X Y Point Density/Smoothing is applied by default on MA MTF for visual aesthetics. Set both to 0 to disable and see exact ma mtf values (lines with stair stepping and original mtf alignment).
- Smoothing is disabled for BB MTF bands because fill doesn't work with smoothed MAs after duplicate values are replaced with na.
- MTF MA Value fluctuation is possible on the current bar due to default security lookahead
Smoothing:
- X,Y == 0 - X,Y smoothing disabled (stair stepping on high TFs)
- X == 0, Y > 0 - X,Y smoothing applied to all TFs
- Y == 0, X > 0 - X smoothing applied to all TFs < deltaX_max_tf, Y smoothing disabled
- X > 0, Y > 0 - Y smoothing applied to all TFs, then X smoothing applied to all TFs < deltaX_max_tf
X Smoothing with Y == 0 - shows only every deltaX-th point starting from the first bar.
X Smoothing with Y > 0 - shows only every deltaX-th point starting from the last shown Y point, essentially filling huge gaps remaining after Y Smoothing with points and preserving the curve's general shape
X Smoothing on high TFs with already scarce points produces weird curve shapes, it works best only on high density lower TFs
Y Smoothing reduces points on all TFs, removes adjacent points with prices within deltaY, while preserving the smaller curve details.
A combination of X,Y produces the most accurate smoothing. Higher delta value - larger range, more points removed.
Show Max Bars Back:
- can't set plot show_last from input -> implemented using a timenow based range check
- you can't delete/modify history once plotted, so essentially it just sets a start point for plotting (from num_bars bars back) that works only in realtime mode (not in replay)
Levels:
You can plot current MA value using plot trackprice=true or by checking Show Price Line in Style. Problem is:
- you can only change color (not the dashed line style, width), have both ma + price line (not just the line), and it's full screen wide
- you can't set plot trackprice from input => implemented using plotshape/plotchar with fixed text labels serving as levels
- there's no other way of creating a dynamic level: hline, plot, offset - nothing else works.
- you can't plot a text var - all text strings must be constants, so you can't change the style, width and text labels without recompiling.
- from input you can only adjust offset, indent and shift for each level group, and change color
- the dot below each level line is the exact MA value. If you want just the line swap plotshape with plotchar, recompile and save as your private version, adjust Y shift.
To speed up redraw times: reduce last_bars to ~2000, recompile and use as your own private version
Pinescript is a rudimentary language (should be called Painscript instead) that can basically only plot data. You can't do much else. Please see the code for tips and hints.
Certain things just can't be done or require shady workarounds and weeks of testing trying to resolve weird node.js compiler errors.
Feel free to learn from/reuse/change the code as needed and use as your own private version. See comments in code. Good Luck!
Simple_longshort_signalsLong Entry
Criteria:
1) Green candle close above 50MA
2) Green candle close above 20MA
3) MA of RSI(14) is cross upward 50
Result: displays green up arrow
Long Exit
Criteria:
1) Three red candles in a row
2) Any candle close bellow 20MA
3) MA of RSI(14) cross downward 50
Result: displays green diamond
Short Entry
1) Red candle close bellow 50MA
2) Red candle close bellow 20MA
3) MA of RSI(14) is cross downward 50
Result: displays red down arrow
Short Exit
Criteria
1) Three green candles in a row
2) Any candle close above 20MA
3) MA of RSI(14) is cross upward 50
Result: displays red diamond
Noro's Double RSI Strategy 1.0Strategy uses only 2 RSI indicators. Slow and fast.
If slow RSI > 50 and fast RSI < 50 - to open a long-position
If slow RSI < 50 and fast RSI > 50 - to open a short-position
If the long-position is open and a candle green - to close a long-position
if the short-position is open and a candle red - to close a short-position
GoldenCross by PuffyThis is a simple trading strategy that seeks the Golden Cross and Death Cross on the 4HR chart. The fast moving indicator in this strategy is the EMA 50 and the slow moving indicator is the EMA 200. When the EMA 50 crosses over the EMA 200 the strategy indicates a buy. When the EMA 50 crosses below the EMA 200 the strategy indicates a sell. This strategy averages trades in the 40 - 50 day range and as such should not be used with heavy leverage.
Exponential Moving Average (Set of 3) [Krypt] + 13/34 EMAsI took Krypt's script and essentially added on to it.
the 20/50/100/200 EMAs should be used together as support and resistance as normal.
Wait for price to break 200 EMA
Wait for 50 EMA to cross 200 EMA
Wait for pullback to 50 EMA to open position
20 and 100 EMAs are for extra information about moving support and resistance
and 13/34 EMAs should be used in conjunction
When 13 EMA crosses 34 EMA, open position
When price gets far from 13/34, close position (because price will attempt to revert back to mean)
This is better for scalping and swing trades than the 20/50/100/200 setup.
Twitter: @AzorAhai06
MTF EMAExponential Moving Average indicator that can be configured to display different timeframe EMA's.
Timeframe is set in minutes. Max timeframe currently is the daily (1440 minutes). Any value higher than 1440 will result in no plot.
Examples:
Daily 50 EMA plotted on 4H chart
4H 50 EMA and Daily 50 EMA plotted on 1H chart
Can also work in reverse if needed.
Example, Daily 50 EMA plotted on Weekly Chart
Price vs VolImproved version of OBV/price (this one actually works)
Both lines show where price is going relative to volume metrics (one line uses OBV, the other uses accumulation/distribution).
Green and above 50 means price is rising faster then buying volume
Red and below 50 means price is falling faster then selling volume
you can add smoothing in the controls and color will go according to raw (even if smoothing goes above/below 50)
under the hood: changes price, OBV and AD to RSI for comparability, calculates the difference between price and the others, then an RSI on the result to create an <50< style indicator.
this script replaces the previouse from:
GRG/RGR Signal, MA, Ranges and PivotsThis indicator is a combination of several indicators.
It is a combination of two of my indicators which I solely use for trading
1. EMA 10-20-50-200, Pivots and Previous Day/Week/Month range
2. 3/4-Bar GRG / RGR Pattern (Conditional 4th Candle)
You can use them individually if you already have some of them or just use this one. Belive me when I say, this is all you need, along with market structure knowlege and even if you don’t have that, this indicator has been doing wonders for me. This is all I use. I do not use anything else.
**Note - Do checkout the indicators individually as I have added valuable information in the comment section.
It contains the following,
1. 10 EMA/SMA - configurable
2. 20 EMA/SMA - configurable
3. 50 EMA/SMA - configurable
4. 200 EMA/SMA - configurable
5. Previous Day's Range
6. Previous Week's Range
7. Previous Month's Range
8. Pivots
9. Buy Sell Signal
The Moving Averages
It is a very important combination and using it correctly with price action will strengthen your entries and exits.
The ema's or sma's added are the most powerful ones and they do definitely act as support and resistance.
The Daily/Weekly/Monthly Ranges
The Daily/Weekly/Monthly ranges are extremely important for any trader and should be used for targets and reversals.
Pivots
Pivots can provide support and resistance level. R5 and S5 can be used to check for over stretched conditions. You can customise them however you like. It is a full pivot indicator.
It is defaulted to show R5 and S5 only to reduce noise in the chart but it can be customised.
The 3/4 RGR or GRG Signal Generator
Combined with a 3/4 RGR or GRG setup can be all a trader needs.
You don't need complex strategies and SMC concepts to trade. Simple EMAs, ranges and RGR/GRG setup is the most winning combination.
This indicator can be used to identify the Green-Red-Green or Red-Green-Red pattern.
It is a price action indicator where a price action which identifies the defeat of buyers and sellers.
If the buyers comprehensively defeat the sellers then the price moves up and if the sellers defeat the buyers then the price moves down.
In my trading experience this is what defines the price movement.
It is a 3 or 4 candle pattern, beyond that i.e, 5 or more candles could mean a very sideways market and unnecessary signal generation.
How does it work?
Upside/Green signal
1. Say candle 1 is Green, which means buyers stepped in, then candle 2 is Red or a Doji, that means sellers brought the price down. Then if candle 3 is forming to be Green and breaks the closing of the 1st candle and opening of the 2nd candle, then a green arrow will appear and that is the place where you want to take your trade.
2. Here the buyers defeated the sellers.
3. Sometimes candle 3 falls short but candle 4 breaks candle 1's closing and candle 2's opening price. We can enter on candle 4.
4. Important - We need to enter the trade as soon as the price moves above the candle 1 and 2's body and should not wait for the 3rd or 4th candle to close. Ignore wicks.
5. But for a more optimised entry I have added an option to use candle’s highs and lows instead of open and close. This reduces lot of noise and provides us with more precise entry. This setting is turned on by default.
6. I have restricted it to 4 candles and that is all that is needed. More than that is a longer sideways market.
7. I call it the +-+ or GRG pattern or Green-Red-Green or Buyer-Seller-Buyer or Seller defeated or just Buyer pattern.
8. Stop loss can be candle 2's mid for safe traders (that includes me) or candle 2's body low for risky traders.
9. Back testing suggests that body low will be useless and result in more points in loss because for the bigger move this point will not be touched, so why not get out faster.
Downside/Red signal
1. Say candle 1 is Red, which means sellers stepped in, then candle 2 is Green or a Doji, that means buyers took the price up. Then if candle 3 is forming to be Red and breaks the closing of the 1st candle and opening of the 2nd candle then a Red arrow will appear and that is the place where you want to take your trade.
2. Sometimes candle 3 falls short but candle 4 breaks candle 1's closing and candle 2's opening price. We can enter on candle 4.
3. We need to enter the trade as soon as the price moves below the candle 1 and 2's body and should not wait for the 3rd or 4th candle to close.
4. But for a more optimised entry I have added an option to use candle’s highs and lows instead of open and close. This reduces lot of noise and provides us with more precise entry. This setting is turned on by default.
5. I have restricted it to 4 candles and that is all that is needed. More than that is a longer sideways market.
6. I call it the -+- or RGR pattern or Red-Green-Red or Seller-Buyer-Seller or Buyer defeated or just Seller pattern.
7. Stop loss can be candle 2's mid for safe traders ( that includes me) or candle 2's body high for risky traders.
8. Back testing suggests that body high will be useless and result in more points in loss because for the bigger move this point will not be touched, so why not get out faster.
Important Settings
1. Include 4th Candle Confirmation - You can enable or disable the 4th candle signal to avoid the noise, but at times I have noticed that the 4th candle gives a very strong signal or I can say that the strong signal falls on the 4th candle. This is mostly a coincidence.
2. Bars to check (default 10) - You can also configure how many previous bars should the signal be generated for. 10 to 30 is good enough. To backtest increase it to 2000 or 5000 for example.
3. Use Candle High/Low for confirmation instead of Candle Open/Close - More optimized entry and noise reduction. This option is now defaulted to false.
4. Show Green-Red-Green (bull) signals - Show only bull entries. Useful when I have a predefined view i.e, I know market is going to go up today.
5. Show Red-Green-Red (bear) signals - Show only bear entries. Useful when I have a predefined view i.e, I know market is going to go down today.
6. 3rd candle should be a Strong candle before considering 4th candle - This will enforce additional logic in 4 candle setup that the 3rd candle is the candle in our direction of breakout. This means something like GRGG is mandatory, which is still the default behaviour. If disabled, the 3rd candle can be any candle and 4th candle will act as our breakout candle. This behaviour has led to breakouts and breakdowns as times, hence I added this as a separate feature. Vice-versa for a RGGR.
For a 4 candle setup till now we were expecting GRGG or RGRR but we can let the system ignore the 3rd candle completely if needed.
This will result in additional signals.
7. Three intraday ranges added for index and stock traders - 1 min, 5 min and 15 min ranges will be displayed. These are disabled by default except 15 min. These are very important ranges and in sideways days the price will usually move within the 15 min. A breakout of this range and a positive signal can be a very powerful setup.
Safe traders can avoid taking a trade in this range as it can lead to fakeouts.
The line style, width, color and opacity are configurable.
Pointers/Golden Rules
1. If after taking the trade, the next candle moves in your direction and closes strong bullish or bearish, then move SL to break even and after that you can trail it.
2. If a upside trade hits SL and immediately a down side trade signal is generated on the next candle then take it. Vice versa is true.
3. Trades need to be taken on previous 2 candle's body high or low combined and not the wicks.
4. The most losses a trader takes is on a sideways day and because in our strategy the stop loss is so small that even on a sideways day we'll get out with a little profit or worst break even.
5. Hold trades for longer targets and don't panic.
6. If last 3-4 days have been sideways then there is a good probability that today will be trending so we can hold our trade for longer targets. Inverse is true when the market has been trending for 2-3 days then volatility followed by sideways is coming (DOW theory). Target to hold the trade for whole day and not exit till the day closes.
7. In general avoid trading in the middle of the day for index and stocks. Divide the day into 3 parts and avoid the middle.
8. Use Support/Resistance, 10, 20, 50, 200 EMA/SMA, Gaps, Whole/Round numbers(very imp) for identifying targets.
9. Trail your SL.
10. For indexes I would use 5 min and 15 min timeframe and at times 10 mins.
11. For commodities and crypto we can use higher timeframe as well. Look for signals during volatile time durations and avoid trading the whole day. Signal usually gives good targets on those times.
12. If a GRG or RGR pattern appears on a daily timeframe then this is our time to go big.
13. Minimum Risk to Reward should be 1:2 and for longer targets can be 1:4 to 1:10.
14. Trade with small lot size. Money management will happen automatically.
15. With small lot size and correct Risk-Reward we can be very profitable. Don't trade with big lot size.
16. Stay in the market for longer and collect points not money.
17. Very imp - Watch market and learn to generate a market view.
18. Very imp - Only 3 type of candles are needed in trading -
Strong Bullish (Big Green candle), Strong Bearish (Big Red candle),
Hammer (it is Strong Bullish), Inverse Hammer (it is Strong Bearish)
and Doji (indecision or confusion).
If on daily timeframe I see Strong Bullish candle previous day then I am biased to the upside the next day, if I see Strong Bearish candle the previous day then I am biased to the downside the next day, if I see Doji on the previous day then I am cautious the next day, if there are back to back Dojis forming in daily or weekly then I am preparing for big move so time to go big once I get the signal.
19. Most Important Candlestick pattern - Bullish and Bearish Engulfing
20. The only Chart patterns I need -
a) Falling Wedge Bullish Pattern Uptrend or Bull Flag - Buying - Forming over a couple days for intraday and forming over a couple of weeks for swing
b) Falling Wedge Bullish Pattern Downtrend or Falling Channel - Buying
c) Rising Wedge Bearish Pattern Uptrend or Rising Channel - Selling
d) Rising Wedge Bearish Pattern Downtrend or Bear flag - Selling
e) M and W pattern - Reversal Patterns - They form within the above 4 patterns, usually resulting in the break of trend line
21. How Gaps work -
a) Small Gap up in Uptrend - Market can fill the gap and reverse. The perception is that people are buying. If previous day candle was Strong Bullish then market view is up.
b) Big Gap up in Uptrend - Not news driven - Profit booking will come but may not fill the entire gap
c) Big Gap up in Uptrend - News driven, war related, tax, interest rate - Market can keep going up without stopping.
c) Flat opening in Uptrend - Big chance of market going up. If previous day candle was Strong Bullish then view is upwards, if it was Doji then still upwards.
d) Gap down in Uptrend - Market is surprised. After going down initially it can go up
e) Small Gap down in Downtrend - Market can fill the gap and keep moving down. If previous day candle was Strong Bearish then view is still down.
f) Flat opening in Downtrend - View is down, short today.
g) Big Gap down in Downtrend - Profit booking and foolish buying will come but market view is still down.
h) Gap down with News - Volatility, sideways then down.
22. Go big on bearish days for option traders. Puts are better bought and Calls are better sold.
23. Cluster of green signals can lead to bigger move on the upside and vice versa for red signals.
24. Most of this is what I learned from successful traders (from the top 2%) only the indicator is mine.
JW Clean Adaptive Channel//@version=5
indicator("JW Clean Adaptive Channel", overlay=true)
// Inputs
emaFast = input.int(20, "EMA Fast")
emaMid = input.int(50, "EMA Mid")
emaSlow = input.int(200, "EMA Slow")
atrLen = input.int(14, "ATR Length")
regLen = input.int(100, "Regression Window")
multATR = input.float(2.0, "Channel Width x ATR", step=0.1)
baseATR = input.int(50, "ATR Baseline")
volCap = input.float(2.5, "Max Vol Mult", step=0.1)
// EMAs
ema20 = ta.ema(close, emaFast)
ema50 = ta.ema(close, emaMid)
ema200 = ta.ema(close, emaSlow)
plot(ema20, "EMA 20", color=color.lime)
plot(ema50, "EMA 50", color=color.yellow)
plot(ema200, "EMA 200", color=color.orange, linewidth=2)
// Adaptive regression channel
atr = ta.atr(atrLen)
bAtr = ta.sma(atr, baseATR)
vRat = bAtr == 0.0 ? 1.0 : math.min(atr / bAtr, volCap)
width = atr * multATR * vRat
basis = ta.linreg(close, regLen, 0)
upper = basis + width
lower = basis - width
slope = basis - basis
chanColor = slope > 0 ? color.lime : slope < 0 ? color.red : color.gray
pU = plot(upper, "Upper", color=chanColor)
pL = plot(lower, "Lower", color=chanColor)
pB = plot(basis, "Basis", color=color.gray)
fill(pU, pL, color=color.new(chanColor, 85))
// Candle and background color
ribbonBull = ema20 > ema50 and ema50 > ema200
ribbonBear = ema20 < ema50 and ema50 < ema200
barcolor(ribbonBull ? color.lime : ribbonBear ? color.red : na)
bgcolor(slope > 0 ? color.new(color.green, 85) : slope < 0 ? color.new(color.red, 85) : na)
// MACD buy/sell markers
= ta.macd(close, 12, 26, 9)
buySig = ta.crossover(macdLine, sigLine) and slope > 0
sellSig = ta.crossunder(macdLine, sigLine) and slope < 0
plotshape(buySig, title="Buy", style=shape.triangleup, color=color.lime, location=location.belowbar, size=size.tiny)
plotshape(sellSig, title="Sell", style=shape.triangledown, color=color.red, location=location.abovebar, size=size.tiny)
// Trend strength label (single-line calls; no dangling commas)
strength = slope * vRat * 1000.0
string tText = "Sideways"
color tCol = color.gray
if strength > 2
tText := "Strong Uptrend"
tCol := color.lime
else if strength > 0.5
tText := "Weak Uptrend"
tCol := color.new(color.lime, 40)
else if strength < -2
tText := "Strong Downtrend"
tCol := color.red
else if strength < -0.5
tText := "Weak Downtrend"
tCol := color.new(color.red, 40)
var label tLbl = na
if barstate.islast
if not na(tLbl)
label.delete(tLbl)
tLbl := label.new(x=bar_index, y=high, text=tText, style=label.style_label_right, textcolor=color.white, color=tCol, size=size.normal, yloc=yloc.price)
// 10-day breakout alerts
hi10 = ta.highest(high, 10)
lo10 = ta.lowest(low, 10)
alertcondition(close > hi10, title="10-Day High Break", message="{{ticker}} 10D HIGH @ {{close}}")
alertcondition(close < lo10, title="10-Day Low Break", message="{{ticker}} 10D LOW @ {{close}}")
alertcondition(buySig, title="Buy Alert", message="BUY {{ticker}} @ {{close}}")
alertcondition(sellSig, title="Sell Alert", message="SELL {{ticker}} @ {{close}}")
15-Min RSI Scalper [SwissAlgo]15-Min RSI Scalper
Tracks RSI Momentum Loss and Gain to Generate Signals
-------------------------------------------------------
WHAT THIS INDICATOR CALCULATES
This indicator attempts to identify RSI directional changes (RSI momentum) using a step-by-step "ladder" method. It reads RSI(14) from the next higher timeframe relative to your chart. On a 15-minute chart, it uses 1-hour RSI. On a 5-minute chart, it uses 15-minute RSI, and so on.
How the ladder logic works:
The indicator doesn't track RSI all the time. It only starts tracking when RSI crosses into potentially extreme territory (these are called "events" in the code):
For sell signals : when RSI crosses above a dynamic upper threshold (typically between 60-80, calculated as the 90th percentile of recent RSI)
For buy signals : when RSI crosses below a dynamic lower threshold (typically between 20-40, calculated as the 10th percentile of recent RSI)
Once tracking begins, RSI movement is divided into 2-point steps (boxes). The indicator counts how many boxes RSI climbs or falls.
A signal generates only when:
RSI reverses direction by at least 2 boxes (4 RSI points) from its extreme
RSI holds that reversal for 3 consecutive confirmed bars
Example: Dynamic threshold is at 68. RSI crosses above 68 → tracking starts. RSI climbs to 76 (4 boxes up). Then it drops back to 72 and stays below that level for 3 bars → sell signal prints. The buy signal works the same way in reverse.
-------------------------------------------------------
SIGNAL GENERATION METHODOLOGY
Sell Signal (Red Triangle)
RSI crosses above a dynamic start level (calculated as the 90th percentile of the last 1000 bars, constrained between 60-80)
Indicator tracks upward progression in 2-point boxes
RSI reverses and drops below a boundary 2 boxes below the highest box reached
RSI remains below that boundary for 3 confirmed bars
Red triangle plots above price
Reset condition: RSI returns below 50
Buy Signal (Green Triangle)
RSI crosses below a dynamic start level (10th percentile of last 1000 bars, constrained between 20-40)
Indicator tracks downward progression in 2-point boxes
RSI reverses and rises above a boundary 2 boxes above the lowest box reached
RSI remains above that boundary for 3 confirmed bars
Green triangle plots below price
Reset condition: RSI returns above 50
-------------------------------------------------------
TECHNICAL PARAMETERS
All parameters are hardcoded:
RSI Period: 14
Box Size: 2 RSI points
Reversal Threshold: 2 boxes (4 RSI points)
Confirmation Period: 3 bars
Reset Level: RSI 50
Sell Start Range: 60-80 (dynamic)
Buy Start Range: 20-40 (dynamic)
Lookback for Percentile: 1000 bars
Note: Since the code is open source, users can modify these hardcoded values directly in the script to adjust sensitivity. For example, increasing the confirmation period from 3 to 5 bars will produce fewer but more conservative signals. Decreasing the box size from 2 to 1 will make the indicator more responsive to smaller RSI movements.
-------------------------------------------------------
KEY FEATURES
Automatic Higher Timeframe RSI
When applied to a 15-minute chart, the indicator automatically reads 1-hour RSI data. This is the next standard timeframe above 15 minutes in the indicator's logic.
Dynamic Adaptive Start Levels
Sell signals use the 90th percentile of RSI over the last 1000 bars, constrained between 60-80. Buy signals use the 10th percentile, constrained between 20-40. These thresholds recalculate on each bar based on recent data.
Ladder Box System
RSI movements are tracked in 2-point boxes. The indicator requires a 2-box reversal followed by 3 consecutive bars maintaining that reversal before generating a signal.
Dual Signal Output
Red down-triangles plot above price when the sell signal conditions are met. Green up-triangles plot below the price when buy signal conditions are met.
-------------------------------------------------------
REPAINTING
This indicator does not repaint. All calculations use "barstate.isconfirmed" to ensure signals appear only on closed bars. The request.security() call uses lookahead=barmerge.lookahead_off to prevent forward-looking bias.
-------------------------------------------------------
INTENDED CHART TIMEFRAME
This indicator is designed for use on 15-minute charts. The visual reminder table at the top of the chart indicates this requirement.
On a 15-minute chart:
RSI data comes from the 1-hour timeframe
Signals reflect 1-hour momentum shifts
3-bar confirmation equals 45 minutes of price action
Using it on other timeframes will change the higher timeframe RSI source and may produce different behavior.
-------------------------------------------------------
WHAT THIS INDICATOR DOES NOT DO
Does not predict future price movements
Does not provide entry or exit advice
Does not guarantee profitable trades
Does not replace comprehensive technical analysis
Does not account for fundamental factors, news events, or market structure
Does not adapt to all market conditions equally
-------------------------------------------------------
EDUCATIONAL USE
This indicator demonstrates one approach to momentum reversal detection using:
Multi-timeframe analysis
Adaptive thresholds via percentile calculation
Step-wise momentum tracking
Multi-bar confirmation logic
It is designed as a technical study, not a trading system. Signals represent calculated conditions based on RSI behavior, not trade recommendations. Always do your own analysis before taking market positions.
-------------------------------------------------------
RISK DISCLOSURE
Trading involves substantial risk of loss. This indicator:
Is for educational and informational purposes only
Does not constitute financial, investment, or trading advice
Should not be used as the sole basis for trading decisions
Has not been tested across all market conditions
May produce false signals, late signals, or no signals in certain conditions
Past performance of any indicator does not predict future results. Users must conduct their own analysis and risk assessment before making trading decisions. Always use proper risk management, including stop losses and position sizing appropriate to your account and risk tolerance.
MIT LICENSE
This code is open source and provided as-is without warranties of any kind. You may use, modify, and distribute it freely under the MIT License.
BTC 5-MA Multi Cross Strategy By Hardik Prajapati Ai TradelabThis strategy is built around the five most powerful and commonly used moving averages in crypto trading — 5, 20, 50, 100, and 200-period SMAs (Simple Moving Averages) — applied on a 1-hour Bitcoin chart.
Core Idea:
The strategy aims to identify strong bullish trends by confirming when the price action crosses above all key moving averages. This alignment of multiple MAs indicates momentum shift and helps filter out false breakouts.
⸻
⚙️ How It Works:
1. Calculates 5 Moving Averages:
• 5 MA → Short-term momentum (fastest signal)
• 20 MA → Near-term trend confirmation
• 50 MA → Mid-term trend filter
• 100 MA → Long-term trend foundation
• 200 MA → Macro-trend direction (strongest support/resistance)
2. Buy Condition (Entry):
• A Buy is triggered when:
• The price crosses above the 5 MA, and
• The closing price remains above all other MAs (20, 50, 100, 200)
This signals that momentum is aligned across all time horizons — a strong uptrend confirmation.
3. Sell Condition (Exit):
• The position is closed when price crosses below the 20 MA, showing weakness in short-term momentum.
4. Visual Signals:
• 🟢 BUY triangle below candles → Entry signal
• 🔴 SELL triangle above candles → Exit signal
• Colored MAs plotted for trend clarity.
⸻
📈 Recommended Usage:
• Chart: BTC/USDT
• Timeframe: 1 Hour
• Type: Trend-following crossover strategy
• Ideal for: Identifying major breakout moves and confirming trend reversals.
⸻
⚠️ Notes:
• This script is meant for educational and backtesting purposes only.
• Always apply additional confirmation tools (like RSI, Volume, or VIX-style filters) before live trading.
• Works best during trending markets; may produce whipsaws in sideways zones.
Total Info Indicator (Public)# Total Info Indicator (TII)
A one-stop TradingView dashboard that overlays key market info on your chart and (optionally) prints **breakout warnings/confirmations** and **Smart SELL** signals. It shows MAs, ATR & stop-loss, RSI/CCI, earnings countdown, and a volume block that compares **today’s volume (so far)** vs a **20-day daily average (excluding today)**.
---
## Features
- **Overlay Dashboard (watermark table)**
- **Name & Market Cap**, **Ticker & Timeframe**, **Sector/Industry**
- **ATR (14)** and **ATR%** with traffic-light emoji
- **MA status** (Above/Below for 20/50/150/200)
- **Stop-loss** value + risk emoji
- **Earnings**: days remaining (if data available)
- **RSI (14)** + trend arrow; **CCI (14)** with interpretation
- **Volume** block:
- `Volume Avg (N)` = **daily** SMA(N) **excluding today**
- `Current Volume` = **today-so-far** (intraday cumulative)
- `Volume change %` vs avg + emoji
- `Volume speed` = today’s **pace** vs the average daily pace
- **On-Chart Visuals**
- **MAs**: 20 / 50 / 150 / 200 (toggle individually)
- **Stop-loss label** at `close − ATR × multiplier` (or Auto from last 3 bars)
- **Pivot price labels** at confirmed swing highs/lows
- **Signals (optional)**
- **Predictive Breakout Warnings** (yellow ⚡) — early hints near S/R
- **Confirmed Breakouts** — green “BUY”/red “SELL”; 🔥 marks very high volume
- **Smart SELL** set — small triangles for:
- RSI **overbought** fade
- **Bearish RSI divergence**
- **EMA-cross** with volume filter
- Thin **EMA** line when Smart SELL is enabled (reference for the cross)
---
## Installation
1. Open **TradingView** → **Pine Editor**.
2. Paste your TII script.
3. Click **Save** → **Add to chart**.
4. If the table doesn’t show, ensure `overlay = true` (already set) and you’re on a symbol with data.
---
## Quick Start (2 minutes)
1. Open **Inputs**.
2. **Volume session alignment**:
- If your chart shows **Extended Hours**, turn **Include Extended Hours** **ON**.
- If not, leave it **OFF** (uses the symbol’s regular session).
3. Pick the **MAs** you want and set **ATR thresholds** & **Stop-loss** style (**Auto** or anchored day).
4. (Optional) Enable **Breakout Detection** and/or **Smart SELLs**.
5. Use the table to read:
- Volatility (ATR row), Position (MA row), Risk (Stop row), Momentum (RSI/CCI),
- Volume vs average & pace,
- **Trend summary** at the bottom.
---
## Volume Logic (important)
- **Today’s volume (intraday)** = **sum of intraday bars since session start**.
Reset uses:
- `syminfo.session` when **Include Extended Hours = OFF** (regular trading hours), or
- **00:00–23:59** when **ON** (includes pre/post).
- **Average volume** = **daily SMA(N)** with **today excluded** (prevents intraday skew).
- **Volume speed** assumes **US RTH 09:30–16:00 (America/New_York)**.
Adjust in code if you trade other sessions.
> **Tip:** To match the built-in Volume pane, mirror your chart’s **Extended Hours** setting with the indicator’s **Include Extended Hours** toggle.
---
## Inputs Overview
### Table Visualization
- **Location** (Top/Middle/Bottom × Left/Center/Right)
- **Text color & size**
### General Information
- **Symbol & TF**, **Company Name**, **Industry & Sector**, **Market Cap**
- **Show Days Until Earnings**, **Show Earnings Info**
### Moving Average Position
- Toggle **MA 20 / 50 / 150 / 200** (on-chart lines + table status)
### ATR Indication
- Show **ATR (14)** & percent
- **Red/Yellow thresholds** → 🟢/🟡/🔴 ATR emoji
### Stop-Loss
- **Source**: Today / Yesterday / 2 Days Ago / **Auto** (tightest of last 3 ATR anchors)
- **ATR Multiplier**: widen/tighten stops
### Volume
- **Include Extended Hours**: defines day reset & matching with chart
- **Lookback (days)**: N for daily average (today excluded)
### Trend Calculation
- Weights for **MA**, **RSI**, **Volume** (default 0.6 / 0.3 / 0.1)
- Total ≥ **0.6** ⇒ **📈 Uptrend 🟢**; otherwise **Downtrend 🔴**
### Pivot High/Low Labels
- **pivotStrength**: larger = stronger swings; confirms later
### Breakout Detection (optional)
- **S/R Length** (window), **Volume Multiplier** vs vol SMA20
- Filters: **Use Volume**, **Use RSI**, **Use Trend**, **Use Retest**
- **Min Breakout %**, **Min Candle Body %**
### Smart SELL Signals (optional)
- **RSI Overbought** level
- **RSI Divergence** lookback
- **EMA Cross** length (with volume > avg filter)
---
## Reading Emojis at a Glance
- **ATR**: 🟢 calm • 🟡 medium • 🔴 high volatility
- **MA status**: “Above … 🟢 / Below … 🔴”
- **Stop-loss** row: 🟢 safer distance • 🟡 moderate • 🔴 tight/at risk
- **Volume**: 🔴 below avg • 🟡 ≈ avg • 🟢 above avg
- **Trend**: “📈 Uptrend 🟢” or “Downtrend 🔴”
Trend-Fib-Pivot Sweep [JopAlgo]Trend-Fib-Pivot Sweep — trend rails + Fib touch rules + sweep logic
Core idea
This tool blends two trend MAs, a rolling Fibonacci grid, and pivot sweep tags so you can do three things quickly:
Trend → MA1 vs MA2 stack and slope
Location → Fib touch/bounce/reject rules
Triggers → sweep → reclaim or trend pullback → continuation
Use the MAs for bias, the Fib levels for where price should react, and the sweeps to spot traps and entries after liquidity grabs.
What you’ll see
MA 1 (default 21, purple) and MA 2 (default 50, gray)
Fib lines from the highest/lowest of your lookback: 0.236 (light blue), 0.382 (green), 0.5 (white), 0.618 (orange), 0.786 (red)
Sweep markers: triangle above = high sweep; triangle below = low sweep
Background: soft green when MA1 > MA2, soft red when MA1 < MA2
Read it fast → Trend (background + MA stack)? Which Fib are we near? Any sweep and reclaim?
How the Fib levels work (and what to do at each)
0.236 → shallow pullback in a strong trend
→ Expect quick bounce continuation.
→ If price closes through 0.236 and stalls, momentum may be cooling; look to 0.382.
0.382 → standard trend pullback
→ In a bullish trend, tests here often bounce and continue.
→ Entry idea: touch/bounce at 0.382 with MA1 above MA2 and rising, then a higher-low and push back above 0.382 → enter.
0.5 → midline / fair value
→ Often the “decision” level.
→ Clean continuation if 0.5 holds; deeper rotation if we accept below (for longs).
0.618 (“golden”) → deep pullback / last line for trend
→ Best risk-defined continuation entries come from rejects/reclaims here.
→ For longs: wick below 0.618, then reclaim 0.618 → long with stop under the sweep low.
0.786 → exhaustive pullback / trap zone
→ If trend is truly alive, 0.786 rejects and snaps back.
→ If we accept beyond 0.786 (closes), expect a full range rotation or trend change.
Touch/bounce rule of thumb
You want to see price interact: touch → reject (wick) → reclaim the level.
A close back above the Fib after a downside probe (or below after an upside probe) is a stronger confirmation than intrabar wicks.
What the MAs do (and how to use them)
MA1 (fast) vs MA2 (slow) define bias and momentum.
MA1 above MA2 and both rising (↗) → bullish regime.
MA1 below MA2 and both falling (↘) → bearish regime.
Flat / crossing often → balance; lean on sweeps and the deeper Fibs (0.5/0.618/0.786).
Interaction with Fibs
Highest quality: Fib level + MA confluence (e.g., 0.382 near MA1).
When MA1 = dynamic trigger: reclaim MA1 at a Fib → continuation signal.
When MA2 = last defense: lose MA2 at 0.5/0.618 → expect deeper rotation.
Sweep logic (why it matters and how to execute)
High sweep = current bar’s high takes out the recent high then fails → liquidity grab above.
Low sweep = current bar’s low takes the recent low then fails → liquidity grab below.
Execution idea
Longs: low sweep into 0.5/0.618/0.786, then reclaim the Fib and, ideally, MA1 → enter; stop under sweep low.
Shorts: high sweep into 0.5/0.382/0.236, then reclaim below the Fib and MA1 → enter; stop above sweep high.
Repaint note
If you enable Lag-Confirmed Pivot Mode, sweep labels are stricter and may “finalize” later (can appear as repaint).
For signals/alerts, prefer non-repaint mode; for review/training, lag-confirmed is fine.
How to trade it (simple playbook)
Direction filter (use MAs first)
Bullish bias → MA1 > MA2 and not flat → look for longs at 0.236/0.382/0.5.
Bearish bias → MA1 < MA2 → look for shorts at 0.236/0.382/0.5 from above.
Entries (two clean templates)
Trend pullback → continuation
→ In bull regime: price pulls to 0.382 or 0.5, shows rejection wick, then reclaims level and MA1 → enter long.
→ In bear regime: mirror with short from above.
Sweep → reclaim
→ Downside sweep through 0.618/0.786, then close back above the Fib and through MA1 → enter long.
→ Upside sweep through 0.382/0.236, then close back below and under MA1 → enter short.
Risk & targets
Stops → beyond the sweep extreme or below/above the reclaimed Fib (structure-based).
Targets → next Fib ladder (e.g., long from 0.5 → target 0.382 → 0.236), or obvious POC/HVNs if you use Volume Profile.
Settings that matter (and how to tune)
MA Types/Lengths
EMA (default fast) = responsive trend read.
SMA/HMA = smoother backbone.
21/50 is a solid default; swing traders can run 34/89.
Fib Lookback
Shorter lookback = tighter range, more sensitive levels;
Longer = broader swing map, fewer interactions but stronger signals.
Sweeps
Sweep Detection Range controls how “recent” the pivot must be (default 10).
Lag-Confirmed mode reduces false sweeps but can finalize later.
Starter presets
Intraday (15m–1H) → MA1 21 EMA, MA2 50 SMA, Fib lookback 100–150, Sweeps 10
Swing (4H) → MA1 34 EMA, MA2 89 SMA, Fib lookback 150–250, Sweeps 10–14
Pattern cheat sheet
0.382 kiss & go (trend day) → quick tag and bounce in bull regime → continuation.
0.5 decision → hold = trend resumes; failure = rotate to 0.618.
0.618 sweep + reclaim → high-quality continuation with tight risk.
0.786 trap → deep flush then snapback; if acceptance persists, expect full rotation.
MA pinch → break → MA1 and MA2 compress, then price breaks and holds a Fib → expansion leg.
Best combos (kept simple)
Volume Profile v3.2 → use VAH/VAL/POC/LVNs as concrete targets; look for Fib + VP confluence.
Anchored VWAP → reclaims/rejections at anchored lines with Fib reaction and MA agreement improve timing.
Common mistakes this helps you avoid
Buying into 0.618/0.786 without a reclaim (catching falling knives).
Fading a 0.236 pullback when MAs are strongly ↗ (fighting trend).
Taking sweeps without a reclaim/confirmation.
Ignoring the MA stack when choosing direction.
Disclaimer
This indicator and write-up are for education only, not financial advice. Trading involves risk; results vary by market, venue, and settings. Test first, act at defined levels, and manage risk. No guarantees or warranties are provided.
Triple VWAP [JopAlgo]Triple VWAP — three volume-weighted rails for trend, pullback, and reversion
Core idea
This is three rolling VWAPs (VWMA-style) with user-set lengths. Together they show:
Trend structure → stack & slope of the three lines
Pullback zones → dynamic VWAP supports/resistances
Reversion risk → distance from the fastest VWAP
Use the stack (fast/medium/slow) for bias, slope for momentum, and distance to avoid chasing.
What you’ll see
VWAP 1 (fast), VWAP 2 (medium), VWAP 3 (slow)
Colors match inputs; each line can be toggled on/off
No bands or extras—just three clean volume-weighted rails
Read it fast → Which line is on top? Are they fanning out or braiding? How far is price from the fast VWAP?
How to use it (simple playbook)
Direction filter
Bullish bias → fast above medium above slow and slopes ↗
Bearish bias → fast below medium below slow and slopes ↘
Entry timing
Trend pullback (with level): In a bullish stack, wait for price to retest fast/medium VWAP at a real level → look for the first higher-low and continuation.
Reclaim / reject: Long when price reclaims fast → medium with holds (mirror for shorts on rejects).
Don’t chase: If price is far above the fast VWAP, wait for a revert toward fast before engaging.
Location first (always)
Act at real references → Volume Profile v3.2 (VAH/VAL/POC/LVNs) and Anchored VWAP
No level → no trade
Quality check (optional)
CVDv1 → prefer Alignment OK, avoid entries when Absorption reads against your side
Entries, exits, risk
Continuation long: Bullish stack ↗, pullback into fast/medium at VAL / AVWAP / LVN, hold → enter
Stop → below structure/last swing • Targets → POC/HVNs or prior swing
Break + retest: Price crosses medium and holds above it, lines begin to fan out ↗ → enter on the retest
Fade to value (advanced): Extended move into VAH with price stretched far from fast VWAP → look for reject and revert toward POC/fast
Trim/Avoid: Into HVNs with lines flattening or braiding → take profits / stand down
Settings that matter (and how to tune)
VWAP Length 1 / 2 / 3 → choose a fast / medium / slow ladder
Shorter = more reactive, more noise
Longer = steadier bias, more lag
Visibility toggles → hide one line if cluttered; many traders keep fast & slow only
Starter presets
Scalp (1–5m) → 20 / 50 / 100
Intraday (15m–1H) → 50 / 100 / 200
Swing (2H–4H) → 50 / 150 / 300
High-vol pairs → 30 / 60 / 120
Pattern cheat sheet
Stack flip: Fast crosses medium, then slow, and all slopes turn ↗ / ↘ → regime change
Triple pinch → expansion: Lines braid tight, then fan out with price holding a level → expansion leg
Kiss & go: Pullback tags fast VWAP in trend and bounces → add/enter with structure
Mean-revert tag: Stretch away from fast into VP edge → revert toward fast/POC
Best combos (kept simple)
Volume Profile v3.2 → entries at VAH/VAL/LVNs, targets at POC/HVNs
Anchored VWAP → session/weekly/event anchors for major reclaims/rejections; use Triple VWAP for day-to-day timing
CVDv1 (optional) → take VWAP-aligned setups with flow; skip when Absorption is against you
Common mistakes this helps you avoid
Trading against the VWAP stack
Chasing far from the fast VWAP
Acting mid-range while lines braid (do less; wait for expansion or edges)
Disclaimer
This indicator and write-up are for education only, not financial advice. Trading involves risk; results vary by market, venue, and settings. Test first, trade at defined levels, and manage risk. No guarantees or warranties are provided.
Multi-Timeframe MACD with Color Mix (Nikko)Multi-Timeframe MACD with Color Mix (Nikko) Indicator
This documentation explains the benefits of the "Multi-Timeframe MACD with Color Mix (Nikko)" indicator for traders and provides easy-to-follow steps on how to use it. Written as of 05:06 AM +07 on Saturday, October 04, 2025, this guide focuses on helping you, as a trader, get the most out of this tool with clear, practical advice before diving into the technical details.
Benefits for Traders
1. Multi-Timeframe Insight
This indicator lets you see momentum trends across 15-minute, 1-hour, 1-day, and 1-week timeframes all on one chart. This big-picture view helps you catch both quick market moves and long-term trends without flipping between charts, saving you time and giving you a fuller understanding of the market.
2. Visual Momentum Representation
The background changes from red to green based on short-term (15m) momentum, giving you a quick, easy-to-see signal—red means bearish (prices might drop), and green means bullish (prices might rise). The histogram uses a mix of red, green, and blue colors to show the combined strength of the 1-hour, 1-day, and 1-week timeframes, helping you spot strong trends at a glance (e.g., a bright mix for strong momentum, darker for weaker).
3. Enhanced Decision-Making
The background and histogram colors work together to confirm trends across different timeframes, making it less likely you’ll act on a false signal. This helps you feel more confident when deciding when to buy, sell, or hold.
4. Proactive Alert System
You can set alerts to notify you when the percentage of bullish timeframes hits your chosen levels (e.g., below 10% for bearish, above 90% for bullish). This keeps you in the loop on big momentum shifts without needing to watch the chart all day—perfect for when you’re busy.
5. Flexibility and Efficiency
You can turn timeframes on or off, adjust settings like speed of the moving averages, and tweak transparency to fit your trading style—whether you’re a fast scalper or a patient swing trader. Everything is shown on one chart, saving you effort, and the colors make it simple to read, even if you’re new to trading.
How to Use It
Getting Started
Add the Indicator: Load the "Multi-Timeframe MACD with Color Mix (Nikko)" onto your TradingView chart using the Pine Script editor or indicator library.
Pick Your Timeframes: Turn on the timeframes that match your trading—use 15m and 1h for quick trades, or 1d and 1w for longer holds—using the enable_15m, enable_1h, enable_1d, enable_1w, and enable_background options.
Reading the Colors
Background Gradient: Watch for red to signal bearish 15m momentum and green for bullish momentum. Adjust the Background_transparency (default 75%, or 25% opacity) if the chart feels too busy—try lowering it to 50 for clearer candlesticks in fast markets.
Histogram and EMA Colors:
The histogram and its Exponential Moving Average (EMA) line show a mix of red (1-week), green (1-day), and blue (1-hour) based on how strong the momentum is in each timeframe.
Brighter colors mean stronger momentum—white (all bright) shows all timeframes are pushing up hard, while darker shades (like gray or black) mean weaker or mixed momentum.
Turn off a timeframe (e.g., enable_1h = false) to see how it changes the color mix and focus on what matters to you.
Setting Alerts
Set Your Levels: Choose a threshold_low (default 10%) and threshold_high (default 90%) based on your comfort zone or past market patterns to catch big turns.
Get Notifications: Use TradingView alerts to get pings when the market hits your set levels, so you can act without staring at the screen.
Practical Tips
Pair with Other Tools: Use it with support/resistance lines or the RSI to double-check your moves and build a solid plan.
Tweak Settings: Adjust fast_length, slow_length, and signal_smoothing to match your asset’s speed, and bump up the lookback (default 50) for steadier trends in wild markets.
Practice First: Test different timeframe combos on a demo account to find what works best for you.
Understanding the Colors (Simple Explanation)
How Colors Work
The histogram and its EMA line use a color mix based on a simple idea from color theory, like mixing paints with red, green, and blue (RGB):
Red comes from the 1-week timeframe, green from 1-day, and blue from 1-hour.
When all three timeframes show strong upward momentum, they blend into bright white—the brightest color, like a super-bright light telling you the market’s roaring up.
If some timeframes are weak or pulling down, the mix gets darker (like gray or black), warning you the momentum might not be solid.
Brighter is Better
Bright Colors = Strong Opportunity: The brighter the histogram and EMA (closer to white), the more all your chosen timeframes are in agreement that prices are rising. This is your signal to think about buying or holding, as it points to a powerful trend you can ride.
Dark Colors = Caution: A darker mix (toward black) means some timeframes are lagging or bearish, suggesting you might wait or consider selling. It’s like a dim light saying, “Hold on, check again.”
Benefit in Practice: Watching the brightness helps you jump on the best trades fast. For example, a bright white histogram on a green background is like a green traffic light—go for it! A dark gray on red is like a red light—pause and rethink. This quick color check can save you from bad moves and boost your profits when the trend is strong.
Why It Helps
These colors are your fast friend in trading. A bright histogram means all your timeframes are cheering for an uptrend, giving you the confidence to act. A dull one tells you to be careful, helping you avoid traps. It’s like having a color-coded guide to pick the hottest market moments!
Technical Details
Input Parameters
Fast Length (default: 12): Short-term moving average speed.
Slow Length (default: 26): Long-term moving average speed.
Source (default: close): Price data used.
Signal Smoothing (default: 9): Smooths the signal line.
MA Type (default: EMA): Choose EMA or SMA.
Timeframe and Scaling
Timeframes: 15m, 1h, 1d, 1w, with on/off switches.
Lookback Period (default: 50): Sets the data window for trends.
Background Transparency (default: 75%): Controls background see-through level.
MACD Calculation
Per Timeframe: Uses request.security():
MACD Line: ta.ema(src, fast_length) - ta.ema(src, slow_length).
Signal Line: ta.ema(MACD, signal_length).
Histogram: (macd - signal) / 3.0.
Background Gradient
15m Normalization: norm_value = (hist_15m - hist_15m_min) / max(hist_15m_range, 1e-10), limited to 0-1.
RGB Mix: Red drops from 255 to 0, green rises from 0 to 255, blue stays 0.
Apply: color.new(color.rgb(r_val, g_val, b_val), Background_transparency).
Histogram and EMA Colors
Color Assignment:
1h: Blue (#0000FF) if hist_1h >= 0, else black.
1d: Green (#00FF00) if hist_1d >= 0, else black.
1w: Red (#FF0000) if hist_1w >= 0, else black.
Final Color: final_color = color.rgb(min(r, 255), min(g, 255), min(b, 255)).
Plotting: Histogram and EMA use final_color; MACD (#2962FF), signal (#FF6D00).
Alerts
Bullish Percentage: bullish_pct = (bullish_count / bullish_total) * 100, counting hist >= 0.
Triggers: Below threshold_low or above threshold_high.
--------------------------------------------------------------------
Conclusion
The "Multi-Timeframe MACD with Color Mix (Nikko)" is your all-in-one tool to spot trends, confirm moves, and trade smarter with its bright, easy-to-read colors. By using it wisely, you can sharpen your market edge and trade with more confidence.
This README is tailored for traders and reflects the indicator's practical value as of 05:06 AM +07 on October 04, 2025.
Multiple Moving Averages [JopAlgo]Multiple Moving Averages — read trend, timing, and strength at a glance
What it does:
Mark up to 5 moving averages (you pick type + length + color). Watch how they stack, slope, braid, and fan out to judge trend direction, pullback timing, and breakout quality on any timeframe.
Read it in 5 seconds
Stack order:
Bullish: fast MAs on top of slow MAs.
Bearish: fast MAs below slow MAs.
Slope: up = trend has a tailwind; down = headwind.
Spacing: wide = strong trend; tight/braided = balance/chop.
If you remember only one rule: trade with the stack and slope, enter at levels.
High-probability plays (simple and repeatable)
Trend pullback (with level)
Stack is bullish, slopes up.
Price pulls back to the MA cluster (or AVWAP/VAL), holds, fast MAs curl back up.
Long. Stop: below structure/slowest MA. Target: POC/HVNs or next swing.
(Mirror for shorts in a bearish stack.)
Reclaim + recurl
After a down phase, price closes above fast MAs (MA1–MA2), they turn up, and you’re at a real level (AVWAP/VA edge).
Take the first higher-low with the stack starting to flip.
Squeeze → expansion
MAs braid tight = energy building.
Break at a level, then the lines fan out in your direction.
Enter on the first retest that holds.
Skip trades when the lines are braided mid-range and you’re not at a level.
Timeframe guide (what usually works)
1–5m (scalps): EMA heavy (e.g., 5/9/21/34/55). Expect more signals; filter with levels + CVD.
15m–1H (intraday): 9/21/34/50/200 (mix EMA for fast, SMA for slow).
2H–4H (swing): 10/20/50/100/200 or 8/21/34/55/89 (smoother read).
1D+ (position): 20/50/100/200 (bias) and enter on lower TF.
Tip: Don’t set all five to the same length—stagger them so the stack tells a story.
Settings that matter (and what they mean)
MA types (pick the feel you like):
EMA – fastest response (great for timing).
SMA – smoother backbone (great for bias).
WMA / LWMA – responsive but less twitchy than EMA.
VWMA – weights price by volume (good on assets with uneven volume).
SMMA – very smooth (reduces whips).
DEMA – extra fast (can be noisy).
HEMA – in this script behaves like a double-EMA style response (fast).
RVIMA – not implemented here (will plot nothing if chosen).
Length:
Shorter = earlier turns, more noise.
Longer = slower, cleaner bias.
Keep a sensible spread (e.g., 1:2:3… or Fib-style 9/21/34/55/89).
Colors:
Use consistent colors (e.g., warm = fast, cool = slow) so you can read the stack instantly.
Best combos with other tools
Volume Profile v3.2: take signals at VAH/VAL/LVNs; use POC/HVNs for targets.
Anchored VWAP: reclaims/rejections + MA recurl = clean timing.
CVDv1: execute with flow (Alignment OK, strong Imbalance, no Absorption against you).
Common mistakes this prevents
Shorting into a bullish stack (or buying into a bearish one).
Chasing far from the fast MAs; better to wait for a pullback.
Trading every wiggle in chop—braids tell you to do less.
Quick FAQs
Cluttered chart? Hide 1–2 lines (keep fast, middle, slow) or thin the linewidth.
Which one is “right”? None. Pick a set that fits your tempo and stick to it.
RVIMA option? Not implemented in this version—choose another type.
Starter presets (copy these, then adjust)
Intraday: MA1 EMA9, MA2 EMA21, MA3 SMA34, MA4 SMA50, MA5 SMA200
Swing: MA1 EMA10, MA2 SMA20, MA3 SMA50, MA4 SMA100, MA5 SMA200
Scalp: MA1 EMA5, MA2 EMA9, MA3 EMA21, MA4 EMA34, MA5 EMA55
Mini-disclaimer
Educational tool, not financial advice. Always anchor trades to levels, flow, and risk—this indicator keeps your bias and timing honest; the plan is still yours.
