เริ่มกันเลย

ค้นหาในสคริปต์สำหรับ "Candlestick"

Secondary Candle OverlayThis simple script is meant to allow the user to select another symbol to add onto their chart and plot the candlesticks for that symbol at the selected resolution requested. Please see the tooltip provided by the 'Secondary Symbol' input for more details with regards to properly using this script on symbols that have vastly different valuations, it will help with getting the symbol requested to scale properly with the primary symbol on the chart. The user may also input which colors are used for bullish/bearish candles as well as the symbol itself and its resolution. IMPORTANT NOTE: THIS SCRIPT DOES NOT ACCOUNT FOR SYMBOLS THAT ARE NOT CONTINUOUS (The defval for the symbol is TVC:DXY which closes on weekends whereas a cryptocurrency like Bitcoin does not stop trading ever; candles on these kinds of markets will be repeated when overlaid onto markets that do not have this property.)
อินดิเคเตอร์ Pine Script®
โดย SolCollector
1
Popgun Bar PatternI created this script to research the trading effectiveness of the Popgun Bar Pattern. The Popgun Bar Pattern is found when 3 candlesticks in order form the following pattern: 0. Any bar that is then followed by: 1. An inside bar. This is a bar that is completely engulfed by the bar before it. It will have a lower high and a higher low than the previous bar. 2. An outside bar immediately after. This is a bar that completely engulfs the prior inside bar. It will have a higher high and a lower low than the previous bar. Simply put, the Popgun Bar Pattern is an inside bar followed by an outside bar. I would highly recommend incorporating this signal as a "trigger" for existing technical analysis. Used in isolation it may not have a high probability of success. To make it more effective as a trigger to a trading signal I incorporated into my code an Entry, Stop, and a Target dot. The Entry dot is offset from the low of a bearish Popgun Bar Pattern or the high of a bullish Popgun Bar Pattern by a factor of ATR. The default ATR percentage is 33% but can be adjusted. The Stop dot is based on the recent highest high (bearish) or lowest low (bullish) of a set range (default is 9 bars) plus/minus the ATR percentage buffer. The Target dot is automatically calculated from the entry based on a configurable reward factor (default is 3) from the entry to stop distance. This projects a potential 3:1 reward/risk trade by default. There is an additional alert condition which can be configured at the end of the script.
อินดิเคเตอร์ Pine Script®
โดย norok
1
FREE TRADINGVIEW FOR TIMEFRAMESWhen doing i.e the 3 minute timeframe turn on the closest timeframe available for you or the candles and wicks will be fucked up. So if you're doing the 5 hour timeframe candles turn on the 4hr chart on your main chart. To View the candles in full screen double click the windows with the candlesticks If you don't have TradingView premium and want to look at custom timeframes you can use this. For the ticker/coin/pair you want to show enter it like this: For stocks, only the ticker i.e: MSFT, APPL For Crypto, "Exchange:ticker" i.e: BITFINEX:BTCUSD, BINANCE:AGIBTC, BITMEX:ADAM19 When setting up the timeframe write i.e: For minutes/hourly: 5, 240 (4 hour), 360 (6 hour) For daily/weekly/monthly: 1D, 2W, 3M When doing i.e the 3 minute timeframe turn on the closest timeframe available for you or the candles and wicks will be fucked up. So if you're doing the 5 hour timeframe candles turn on the 4hr chart on your main chart.
อินดิเคเตอร์ Pine Script®
โดย CosmonautCalls
3
UCS_S_Steve Primo - Strategy #5 (FOREX Only)Here we have another Steve Primo Strategy ( #5) This is a short term, trend continuation strategy, Recommend using this on 30 Mins + time frames. I have added few things. 1. PET-D filter, to identify the trend along with the SMA 50. ----> Setup in line with PET-D (EMA,15) trend confirmation. 2. Option for Harami Candle identification (may not be Steve Primo Setup), There is no evidence on any of the videos listed below for Harami or other candlesticks pattern. Future - Planned to add other candle patterns. Videos from Youtube 1. www.youtube.com - 2. www.youtube.com - Hints disclosed on this video. 3. www.youtube.com - Claims this is his GO TO strategy for FOREX. 4. www.youtube.com - Complete Free Lesson. Note - I did not buy this Strategy, I do not own in any way shape or form of this strategy as presented in the videos, The Strategy I am posting is my interpretation based on Steve Primo's videos listed above and few more on youtube. Good Luck folks.
อินดิเคเตอร์ Pine Script®
โดย UDAY_C_Santhakumar
27
Monday's Range Superpowerkyu🔔 Settings You can customize the colors and toggle ON/OFF in the indicator settings. Works on daily, hourly, and minute charts. Easily visualize Monday’s high, low, and mid-line range. 📌 1. Support & Resistance with Monday’s Range Monday High: Acts as the first resistance of the week. ◽ Example: If price breaks above Monday’s high after Tuesday, it signals potential bullish continuation → long setup. Monday Low: Acts as the first support of the week. ◽ Example: If price breaks below Monday’s low, it signals bearish continuation → short setup. 📌 2. Mid-Line Trend Confirmation Monday Mid-Line = average price of Monday. Price above mid-line → bullish bias. Price below mid-line → bearish bias. Use mid-line breaks as entry confirmation for long/short positions. 📌 3. Breakout Strategy Break of Monday’s High = bullish breakout → long entry. Break of Monday’s Low = bearish breakout → short entry. Place stop-loss inside Monday’s range for a conservative approach. 📌 4. False Breakout Strategy If price breaks Monday’s high/low but then falls back inside Monday’s range, it is a False Breakout. Strategy: Trade in the opposite direction. ◽ False Breakout at High → short. ◽ False Breakout at Low → long. Stop-loss at the wick (extreme point) of the failed breakout. 📌 5. Range-Based Scalping Use Monday’s high and low as a trading range. Sell near Monday’s High, buy near Monday’s Low, repeat until breakout occurs. 📌 6. Weekly Volatility Forecast Narrow Monday range → higher chance of strong trend later in the week. Wide Monday range → lower volatility expected during the week. 📌 7. Pattern & Trend Analysis within Monday Range Look for candlestick patterns around Monday’s High/Low/Mid-Line. ◽ Example: Double Top near Monday’s High = short setup. ◽ Repeated bounce at Mid-Line = strong long opportunity. ✅ Summary The Monday’s Range (Superpowerkyu) Indicator helps traders: Identify weekly support & resistance Confirm trend direction with Mid-Line Trade breakouts & false breakouts Apply range scalping strategies Forecast weekly volatility ⚡ Especially, the False Breakout strategy is powerful as it captures failed moves and sudden sentiment reversals.
อินดิเคเตอร์ Pine Script®
โดย superpowerkyu
Hilly's 0010110 Reversal Scalping Strategy - 5 Min CandlesKey Features and Rationale: Timeframe: Restricted to 5-minute candles as requested. Pattern Integration: Includes single (Hammer, Shooting Star, Doji), two (Engulfing, Harami), and three-plus (Morning Star, Evening Star) candlestick patterns, plus reversal patterns based on RSI extremes. VWAP Cross: Incorporates bullish (price crosses above VWAP) and bearish (price crosses below VWAP) signals, enhanced by trend context. Volume Analysis: Uses a volume spike threshold to filter noise, with a simple day-start volume comparison for financial environment context. Financial Environment: Approximates the day's sentiment using early-hour volume compared to current volume, adjusted by trend. Aggregation: Scores each condition (e.g., 1 for basic patterns, 2 for strong patterns like Engulfing, 3 for three-candle patterns) and decides based on weighted consensus, with trendStrength as a tunable threshold. Risky Approach: Minimal filtering and a low trendStrength (default 0.5) allow frequent signals, aligning with your $100-to-$200 goal, but expect higher risk. Suggested Inputs: EMA Length: 10 (short enough for 5-minute sensitivity). VWAP Lookback: 1 (uses current session VWAP). Volume Threshold Multiplier: 1.2 (moderate spike requirement). RSI Length: 14 (standard, adjustable to 7 for more sensitivity). Trend Strength Threshold: 0.5 (balance between signals; lower to 0.4 for more trades, raise to 0.6 for fewer).
กลยุทธ์ Pine Script®
โดย Hilly1976
Percentage Change per 5 Candles 🔎 What this indicator does This indicator calculates and displays the percentage change of each candlestick directly on the chart. • If a candle closed higher than it opened (bullish candle), it shows a positive % change (green). • If a candle closed lower than it opened (bearish candle), it shows a negative % change (red). • Small moves below your chosen threshold (e.g., 0.1%) are ignored to avoid clutter. • The labels are placed above, below, or in the center of the candle (you choose). So essentially, every candle “tells you in numbers” exactly how much it changed relative to its opening price. ________________________________________ ⚙️ How it operates (the logic inside) 1. Calculate the change o Formula: \text{% Change} = \frac{(\text{Close} - \text{Open})}{\text{Open}} \times 100 o Example: If a candle opens at 100 and closes at 105, that’s a +5% change. 2. Round it nicely o You can control decimals (e.g., show 2 decimals → +5.23%). 3. Filter out noise o If a candle barely moved (say 0.02%), the label won’t appear unless you reduce the threshold. 4. Style the labels o Bullish = green text, slightly transparent green background. o Bearish = red text, slightly transparent red background. o Neutral (0%) = gray. 5. Place the labels o Options: above the candle, below the candle, or centered. o Small vertical offset is applied so labels don’t overlap the candle itself. ________________________________________ 📊 How this helps traders This indicator turns visual candles into quantifiable numbers at a glance. Instead of guessing whether a move was “big” or “small,” you see it clearly. Key Benefits: 1. Quick volatility analysis o You can instantly see if candles are making big % swings or just small moves. o This is especially useful on higher timeframes (daily/weekly) where moves can be large. 2. Pattern confirmation o For example, you might spot a strong bullish engulfing candle — the % change label helps confirm whether it was truly significant (e.g., +4.5%) or just modest (+0.7%). 3. Noise filtering o By setting a minimum % threshold, you only see labels when moves are meaningful (say > 0.5%). This keeps focus on important candles. 4. Backtesting & comparison o You can compare moves across time:  “How strong was this breakout candle compared to the last one?”  “Are today’s bearish candles weaker or stronger than yesterday’s bullish candles?” 5. Better decision-making o If you’re trading breakouts, reversals, or trend-following, knowing the % size of each candle helps confirm if the move has enough momentum. ________________________________________ ✅ In short: This indicator quantifies price action. Instead of just seeing “green” or “red” candles, you now know exactly how much the price changed in percentage terms, directly on the chart, in real time. It helps you distinguish between strong and weak moves and makes your analysis more precise. ________________________________________
อินดิเคเตอร์ Pine Script®
โดย SupertradeOfficial
Custom Buy/Sell Pattern BuilderAre you tired of using trading indicators that only let you follow fixed, pre-designed rules? Do you wish you could build your own “Buy” or “Sell” signals, experiment with your own ideas, or see instantly if your unique pattern works—without learning coding or hiring a developer? The Custom Buy/Sell Pattern Builder is designed for YOU. This TradingView indicator lets ANY trader—even a complete beginner—define exactly what kind of price and volume conditions should create a BUY or SELL label on any chart, in any market, at any timeframe. You don’t need to know programming. You don’t need to know the definition of a hammer, doji, volume spike, or Engulfing pattern. With a few clicks and easy dropdown choices, you can: Make your own rules for buying or selling Choose how many candles your pattern should look at Decide if you want the biggest body, the lowest volume, the biggest movement, or any combination you can imagine The result? You’ll see clear “BUY” or “SELL” labels automatically show up on your chart whenever the exact rule YOU built matches current price action. No more guessing. No more forced strategies. Just pure control and visual feedback! Why Is This Powerful? Traditional indicators (like MACD, RSI, or even classic candlestick scanners) work the same for everyone—and only as their inventors defined. But every trader, and every market, is unique. What if you could say: “Show me a ‘SELL’ every time the newest candle is bigger than the one before, but with LESS volume, while the bar before that had an even smaller body—but more volume than all others?” With this tool, it’s EASY! You simply pick which candle you want to compare (most recent, previous, etc), what to compare (body or volume—body means the candle’s “thickness”, from open to close), choose “greater than”, “less than”, or “equal to”, and set a multiplier if you want (like “half as much”, “twice as big”, etc). After this, if any bar on the chart fits all your rules, it will mark it as a BUY or SELL, depending on your selection. This means— Beginners can start experimenting with their intuition or small ideas, without tech hurdles Experienced traders can visualize and fine-tune any possible logic, before they commit to backtesting or automating a real strategy Every “what if” or “I wonder” setup is just 2–3 clicks away How Does It Work? Simple Steps 1. Choose Your Signal Type “Buy” or “Sell” This tells the indicator whether to mark the qualifying bars with a green “BUY” or red “SELL” label 2. Pick How Many Candles To Use “Pattern Candle Count” input (2, 3, or 4) Example: If you use 4, the pattern will be applied to the most recent 4 candles at every step 3. Define Your Pattern With Inputs For each candle (from newest “0” to oldest “3”), you can set: Body Condition (example: “is this candle’s body bigger/smaller/equal to another?”) Pick which candle to compare against Pick “>”, “<”, “>=”, “<=”, or “=” Set a multiplier if needed (like “0.5” to mean “half as big as” or “2” for “twice as big as”) Volume Condition (exact same choices, but based on trading volume—not the candle’s price body) For example: “Candle0 Body > Candle2 Body” means “the latest candle’s real-body (open–close) is bigger than the one two bars ago.” “Candle1 Volume <= Candle2 Volume” means “the previous candle’s volume is less than or equal to the volume of the bar two periods ago.” You can leave a comparison blank if you don’t want to use it for a particular candle. What Happens After You Set Your Rules? Every bar on your chart is checked for your logic: If ALL body AND volume conditions are true (for each candle you specified), AND The signal side (“Buy” or “Sell”) matches your dropdown, Then a green “BUY” or red “SELL” label will show right on the bar, so you can visually spot exactly where your logic works! Practical Example: Suppose you want an entry setup that is: “Sell whenever the newest candle’s body is bigger than two bars ago, body before that is bigger than three bars ago, AND the newest candle’s volume is less than or equal to two bars ago, AND the candle three bars ago’s volume is less than or equal to half the candle two bars ago’s volume.” You’d set: Pattern Candle Count: 4 Side: Sell Candle0 Body Ref#: 2, Op: >, Mult: 1 Candle1 Body Ref#: 3, Op: >, Mult: 1 Candle0 Vol Ref#: 2, Op: <=, Mult: 1 Candle3 Vol Ref#: 2, Op: <=, Mult: 0.5 And the script will find all “SELL” bars on your chart matching these conditions. Inputs Section: What Does Each Setting Do? Let’s break down each input in the indicator’s Settings one by one, so even if you’re new, you’ll understand exactly how to use it! 1. Pattern Candle Count (2–4) What is it? This sets how many candles in a row you want your rule to look at. Example: “4” means your rules are based on the most recent candle and the 3 before it. “2” means you are only comparing the current and previous candles. Tip: Beginners often use 4 to spot stronger patterns, but you can experiment! 2. Signal Side What is it? Choose “Buy” or “Sell”. The word you pick here decides which colored label (green for Buy, red for Sell) appears if your pattern matches. Example: Want to spot where “Sell” is likely? Pick “Sell”. Change to “Buy” if you want bullish signals instead. 3. Body & Volume Comparison Settings (per Candle) For each candle (#0 is newest/current, #3 is oldest in your pattern window): Body Comparison Candle# Body Ref# Choose which other candle you want to compare this one’s body to. “0” = newest, “1” = previous, “2” = two bars ago, “3” = three bars ago Candle# Body Op (Operator; >, <, >=, <=, =) How do you want to compare? “>” means “greater than” (is bigger than) “<” means “less than” (is smaller than) “=” means “equal to” Candle# Body Mult (Multiplier) If you want relative comparisons. For example, with Mult=1: “Candle0 body > Candle2 body x 1” means just “0 is larger than 2.” “Candle0 body > Candle2 body x 2” means “0 is more than double 2.” Volume Comparison Candle# Vol Ref# / Op / Mult Exact same logic as body, but works on the “Volume” of each candle (how much was traded during that bar). How to Set Up a Rule (Step by Step Example) Say you want to mark a Sell every time: The most recent candle’s real body is BIGGER than the candle 2 bars ago; The previous candle’s body is also BIGGER than the candle 3 bars ago; The current candle’s volume is LESS than or equal to the volume of candle 2; The previous candle’s volume is LESS than or equal to candle 2’s volume; The candle 3 bars ago’s volume is LESS than or equal to HALF candle 2’s volume. You’d set: Pattern Candle Count: 4 Side: "Sell" Candle0 Body Ref#: 2, Op: “>”, Mult: 1 Candle1 Body Ref#: 3, Op: “>”, Mult: 1 Candle0 Vol Ref#: 2, Op: “<=”, Mult: 1 Candle1 Vol Ref#: 2, Op: “<=”, Mult: 1 Candle3 Vol Ref#: 2, Op: “<=”, Mult: 0.5 All other comparisons (operators) can be left blank if you don’t want to use them! When these rules are met, a bright red “SELL” label will appear right above the bar matching all your conditions. Practical Tips & FAQ for Beginners What does “body” mean? It’s the “true range” of the candle: the difference between open and close. This ignores wicks for simple setups. What does “volume” mean? This is the total trading activity during that candle/bar. Many traders believe that patterns with different volume “meaning” (such as low-volume up bars, or high-volume down bars) signal a meaningful change. What if nothing shows on chart? It just means your current rules are rarely or never matched! Try making your comparisons simpler (maybe just 2-body and 2-volume conditions to start). You can always hit “Reset Settings” to go back to default. Can I use this for both buying and selling? YES! You can detect both bullish (Buy) and bearish (Sell) custom conditions; just switch “Signal Side.” Do I need to know coding? Not at all! Everything is in simple input panels. Creative Use Cases, Example Recipes & Troubleshooting Creative Ways to Use Spotting Reversals Example: Buy when: the newest candle body is LARGER than the previous 3 bars, but ALL volumes are lower than their neighbors. Why? Sometimes, a big candle with surprisingly low volume after a sequence of small bars can signal a reversal. Finding Exhaustion Moves Example: Sell when: the current bar body is twice as big as two bars ago, but volume is half. Why? A very big candle with very little volume compared to similar bars may show the move is “running out of steam.” Custom “Breakout + Confirmation” Patterns Example: Buy when: Candle 0’s body is greater than Candle 2’s by at least 1.5x, Candle 0’s volume is greater than Candle 1 and Candle 2, Candle 1’s volume is less than Candle 0. Why? This could catch strong breakouts but filter out noisy moves. Multi-bar Bias/Squeeze Filter Use “Pattern Candle Count: 4” Set all 4 volume conditions to “<” and each reference to the previous candle. Now, a BUY or SELL only marks when each bar is “dryer”/less active than the last — a classic squeeze or low-volatility buildup. Troubleshooting Guide “I don’t see any Buy/Sell label; is something broken?” Most likely, your rules are too strict or rare! Try using only two comparisons and leave other “Op” inputs blank as a test. Double-check you have enough candles on the chart: you need at least as many bars as your pattern count. “Why does a label appear but not where I expect?” Remember, the script checks your rules for every NEW candle. The candle “0” is always the most recent, then “1” is one bar back, etc. Check the color and type chosen: “Signal Side” must be “Buy” for green, “Sell” for red. “What if I want a more complex pattern?” Stack conditions! You can demand the body/volume of each candle in your window meet a different rule or all follow the same rule in sequence. Mini Glossary — For Newcomers Candle/Bar: Each bar on the chart, shows price movement during a fixed time (e.g., one minute, one hour, one day). Body: The colored (or filled) part of the candle — the open-to-close price range. Volume: How much of the asset was actually traded that candle/bar. Reference Index: When you pick “2” as a reference, it means “the candle two bars ago in the pattern window.” Operator (“Op”): The math symbol used to compare (>, <, =, etc). Signal Side: Whether you want to highlight bullish (“Buy”) or bearish (“Sell”) bars. Tips for Getting More Value Start Simple—try just one or two conditions at first. See what lights up. Slowly add more logic as you get comfortable. Watch the chart live as you change settings. The labels update instantly—this makes strategy design fast and visual! Try flipping your ideas: If a certain pattern doesn’t work for buys, try reversing the direction for possible “sell” setups. Remember: There is NO wrong idea. This indicator is only limited by your creativity—it’s a “strategy playground.” Example Quick-Start Recipes Classic Sell: 4 candles, side = Sell Candle0 Body > Candle2; Candle1 Body > Candle3 Candle0 Vol <= Candle2; Candle1 Vol <= Candle2; Candle3 Vol <= Candle2 × 0.5 Simple Buy After Pause: 3 candles, side = Buy Candle0 Body > Candle1; Candle0 Vol > Candle1 All other Ops blank Low-Volume Pullback for Entry: 4 candles, side = Buy Candle0 Body > Candle2 Candle0 Vol < Candle1; Candle1 Vol < Candle2; Candle2 Vol < Candle3 Final Words Think of this as your “pattern lab.” No code, no guesswork—just experiment, see what the market actually gives, and design your own visual rulebook. If you’re stuck, reset the script to defaults—it’s always safe to start again! If you want more ready-made “recipes” for different strategies/styles, just ask and I’ll send some more setups for you. Happy building—and may your edge always be YOUR edge!
อินดิเคเตอร์ Pine Script®
โดย cnagda3
RSI Crossover AlertRSI Crossover Alert Indicator - User Guide The RSI Crossover Alert Indicator is a comprehensive technical analysis tool that detects multiple types of RSI crossovers and generates real-time alerts. It combines traditional RSI analysis with signal lines, divergence detection, and multi-level crossing alerts. 1. Multiple Crossover Detection - RSI/Signal Line Cross: Signals a primary trend change. - RSI/Second Signal Cross: Confirmation signals for stronger trends. - Level Crossings: Crosses of Overbought 70, Oversold 30, and Midline 50. - Divergence Detection: Hidden and regular divergences for reversal signals. 2. Alert Types - Alert: RSI > Signal Description: Bullish momentum is building. Signal: Consider long positions. - Alert: RSI < Signal Description: Bearish momentum is building. Signal: Consider short positions. - Alert: RSI > 70 Description: Entering the overbought zone. Signal: Prepare for a potential reversal. - Alert: RSI < 30 Description: Entering the oversold zone. Signal: Watch for a bounce opportunity. - Alert: RSI crosses 50 Description: A shift in momentum. Signal: Trend confirmation. 3. Visual Components - Lines: RSI blue, Signal orange, Second Signal purple - Histogram: Visualizes momentum by showing the difference between RSI and the Signal line. - Background Zones: Red overbought, Green oversold - Markers: Up/down triangles to indicate crossovers. - Info Table: Real-time RSI values and status. Strategy 1: Classic Crossover - Entry Long: RSI crosses above the Signal Line AND RSI is below 50. - Entry Short: RSI crosses below the Signal Line AND RSI is above 50. - Take Profit: On the opposite signal. - Stop Loss: At the recent swing high/low. Strategy 2: Extreme Zone Reversal - Entry Long: RSI is below 30 and crosses above the Signal Line. - Entry Short: RSI is above 70 and crosses below the Signal Line. - Risk Management: Higher win rate but fewer signals. Use a minimum 2:1 risk-reward ratio. Strategy 3: Divergence Trading - Setup: Enable divergence alerts and look for price/RSI divergence. Wait for an RSI crossover for confirmation. - Entry: Enter on the crossover after the divergence appears. Place the stop loss beyond the starting point of the divergence. Strategy 4: Multi-Timeframe Confirmation 1. Check the higher timeframe e.g. Daily to identify the main trend. 2. Use the current timeframe e.g. 4H/1H for your entry. 3. Only enter in the direction of the main trend. 4. Use the RSI crossover as the entry trigger. Optimal Settings by Market - Forex Major Pairs RSI Length: 14, Signal Length: 9, Overbought/Oversold: 70/30 - Crypto High Volatility RSI Length: 10-12, Signal Length: 6-8, Overbought/Oversold: 75/25 - Stocks Trending RSI Length: 14-21, Signal Length: 9-12, Overbought/Oversold: 70/30 - Commodities RSI Length: 14, Signal Length: 9, Overbought/Oversold: 80/20 Risk Management Rules 1. Position Sizing: Never risk more than 1-2% on a single trade. Reduce size in ranging markets. 2. Stop Loss Placement: Place stops beyond the recent swing high/low for crossovers. Using an ATR-based stop is also effective. 3. Profit Taking: Take partial profits at a 1:1 risk-reward ratio. Switch to a trailing stop after reaching 2:1. 1. Filtering Signals - Combine with volume indicators. - Confirm the trend on a higher timeframe. - Wait for candlestick pattern confirmation. 2. Avoid Common Mistakes - Don't trade every single crossover. - Avoid taking signals against a strong trend. - Do not ignore risk management. 3. Market Conditions - Trending Market: Focus on midline 50 crosses. - Ranging Market: Look for reversals from overbought/oversold levels. - Volatile Market: Widen the overbought/oversold levels. - If you get too many false signals: Increase the signal line period, add other confirmation indicators, or use a higher timeframe. - If you are missing major moves: Decrease the RSI length, shorten the signal line period, or check your alert settings. Recommended Combinations 1. RSI + MACD: For dual momentum confirmation. 2. RSI + Bollinger Bands: For volatility-adjusted signals. 3. RSI + Volume: To confirm the strength of a signal. 4. RSI + Moving Averages: To use as a trend filter. This indicator provides a comprehensive RSI analysis. Success depends on proper configuration, risk management, and combining signals with the overall market context. Start with the default settings, then optimize based on your trading style and market conditions.
อินดิเคเตอร์ Pine Script®
โดย Hunk77
Rolling Volatility BandsMake sure to view it from the 1D candlestick chart. The Rolling Volatility Bands indicator provides a statistically-driven approach to visualizing expected daily price movements using true volatility calculations employed by professional options traders. Unlike traditional Bollinger Bands which use price standard deviation around a moving average, this indicator calculates actual daily volatility from log returns over customizable rolling periods (20-day and 60-day), then annualizes the volatility using the standard √252 formula before projecting forward-looking probability bands. The 1 Standard Deviation bands represent a ~68% probability zone where price is expected to trade the following day, while the 2 Standard Deviation bands capture ~95% of expected movements. This methodology mirrors how major exchanges calculate expected moves for earnings and FOMC events, making it invaluable for options strategies like iron condors during low-volatility periods (narrow bands) or directional plays when volatility expands. The indicator works on any timeframe while always utilizing daily candle data via security() calls, ensuring consistent volatility calculations regardless of your chart resolution, and includes real-time annualized volatility percentages plus daily expected range statistics for comprehensive market analysis.
อินดิเคเตอร์ Pine Script®
โดย Refic
Spice • Micro Suite (T/r & B/r)What it is A single Pine v5 indicator that stacks: EMA ribbon + a “special” EMA (11 vs 34) line that flips color on trend. MTF-RSI “pressure” check with simple up/down arrows. Bollinger-Band re-entry system with Top/Bottom triggers (T/B) and confirmations (r) in the next N bars. Classic candlestick add-ons: 3-Line Strike and Leledc exhaustion dots. Your Micro Dots engine (ATR-based regime + Variable Moving Average filter) + an optional VMA trend line. Alerts for all the above. Key signals (what prints on the chart) EMAs (20/50/100/200): plotted faintly; EMA-34 is drawn and colored by the 11>34 trend. RSI arrows Checks RSI(6) on the current TF and (optionally) 5m/15m/30m/1h/4h/1D. Down arrow: current RSI > 70 and the selected higher TF RSIs are also > 70 (pressure cluster just cooled; barssince(redZone)<2). Up arrow: current RSI < 30 and selected higher TFs also < 30 (barssince(greenZone)<2). Bollinger Reversals (your update) T (Top trigger): first close back inside the upper BB (crossunder(close, upper)). B (Bottom trigger): first close back inside the lower BB (crossover(close, lower)). r (Confirm): within the next confirmBars bars (input), price also closes below the T-bar’s low → top r above bar closes above the B-bar’s high → bottom r below bar Bar tinting Only the T/B trigger bars are tinted (yellow/orange). Everything else stays your normal candle colors (unless you add the optional “trend candles” block I gave you). 3-Line Strike Prints a small green/red circle when the 3-line strike pattern appears (bull/bear). Leledc Exhaustion Calculates a running buy/sell index; prints a small ∘ at major highs/lows when exhaustion conditions hit (major==-1 high, major==1 low). Micro Dots (your second script, merged) ATR “micro supertrend” defines regime (up/down). A fast Variable Moving Average + a simple MA(18) filter. Green dot below bar when: VMA < price, price > MA(18), regime up, and VMA not pointing down. Red dot above bar for the bearish mirror. Separate VMA trend line (length = Fast/Med/Slow) that colors green/red/orange by slope. Inputs you’ll care about Top/Bot Reversal → confirmBars (how many bars you allow to confirm the T/B trigger). RSI Timeframes → toggle which HTFs must agree with the OB/OS condition. EMAs → show/hide and lengths. BB → show/hide basis/bands (used for T/B even if hidden). Micro → show dots, show VMA line, choose intensity (Fast/Med/Slow). Alerts Prebuilt alerts for: RSI Up/Down, T/B triggers, T/B confirmations, 3-Line Strike bull/bear, Leledc highs/lows, EMA crosses (20/50/100/200), the special 11/34 trend change, Micro Dots, and VMA price cross. (Alert messages are const strings so they compile cleanly.) How to read clusters (quick playbook) Reversal short: see T on/near upper band → get an r within your window → bonus confidence if an RSI down arrow or Leledc ∘ high shows up around the same time. Reversal long: mirror with B then r, plus RSI up arrow / Leledc ∘ low. Continuation: ignore lone T/B if Micro Dot stays green (or red) and EMA-11 > EMA-34 remains true. Why your candles look “normal” By design, the script only colors bars on T or B trigger bars. If you want always-on trend candles, use the small block I gave you to color by EMA(20/50) (or any rule you like) and let T/B override on trigger bars.
อินดิเคเตอร์ Pine Script®
โดย BigeMarket
SD Bands Filtered Signals### SD Bands Filtered Signals: Reversion & Volatility Scanner **Core Description:** The SD Bands Filtered Signals is a tool developed to help traders identify more accurate buy and sell signals in sideways markets, or during periods of low price movement. It utilizes the principles of Standard Deviation (SD) and a Moving Average (MA), with a unique 'signal filtering' system added to reduce unnecessary noise. **Key Features:** * **SD Bands:** Creates upper and lower bands to define price volatility zones, providing a clear overview of market conditions. * **Intelligent Reversal Signals:** Generates specially filtered Buy/Sell signals for a 'Reversion to the Mean' strategy. These signals appear only when the market has low volatility and the price touches the SD Bands. * **Advanced Signal Filtering System:** Uses a **`Cooldown Bars`** variable to set a rest period between signals. This prevents repetitive arrows in the same zone, helping you find the best signal at the most suitable point. * **Fully Customizable:** You can adjust the **`Length`**, **`Multiplier`**, **`Sideways Threshold`**, and **`Cooldown Bars`** to fit your trading style and asset of choice. **How to Use:** * **Buy Signal (Green Arrow Up):** Look for this signal when the market is sideways and the price moves down to touch the lower band (SD Low). * **Sell Signal (Red Arrow Down):** Look for this signal when the market is sideways and the price moves up to touch the upper band (SD High). * **Customization:** You can adjust the **`Cooldown Bars`** value to control the number of arrows. If you want more accurate but fewer signals, increase this value. **Disclaimer:** * This indicator is an **analytical tool only** and is not a 100% guarantee of profit. * It should be used in conjunction with other forms of analysis, such as candlestick patterns, trading volume, and proper risk management. ไทย ชื่ออินดิเคเตอร์ "SD Bands Filtered Signals: Reversion & Volatility Scanner" คำอธิบายหลัก: อินดิเคเตอร์ SD Bands Filtered Signals เป็นเครื่องมือที่ถูกพัฒนาขึ้นเพื่อช่วยให้นักเทรดสามารถระบุสัญญาณซื้อ (Buy) และขาย (Sell) ที่แม่นยำขึ้นในตลาดแบบ Sideways หรือช่วงที่ราคาเคลื่อนที่ในกรอบแคบๆ โดยใช้หลักการของ Standard Deviation (SD) และ Moving Average (MA) และเพิ่มระบบ 'กรองสัญญาณ' ที่เป็นเอกลักษณ์เพื่อลดสัญญาณรบกวน (Noise) ที่ไม่จำเป็นออกไป คุณสมบัติเด่น: * SD Bands: สร้างเส้นขอบบนและล่างเพื่อระบุโซนความผันผวนของราคา ทำให้เห็นภาพรวมของตลาดได้ง่าย * สัญญาณ Reversal อัจฉริยะ: สร้างสัญญาณ Buy/Sell ที่ถูกคัดกรองมาเป็นพิเศษสำหรับกลยุทธ์การกลับตัว (Reversion to the Mean) โดยจะปรากฏเฉพาะเมื่อตลาดมีความผันผวนต่ำและราคาแตะขอบของ SD Bands * ระบบกรองสัญญาณขั้นสูง: ใช้ตัวแปร Cooldown Bars เพื่อกำหนดระยะเวลาพักสัญญาณ ทำให้ไม่เกิดลูกศรซ้ำๆ ในโซนเดียวกัน และช่วยให้คุณได้สัญญาณที่ดีที่สุดในจุดที่เหมาะสมที่สุด * ปรับแต่งได้เต็มที่: คุณสามารถปรับค่า Length, Multiplier, Sideways Threshold และ Cooldown Bars เพื่อให้เข้ากับสไตล์การเทรดและคู่สินทรัพย์ที่คุณสนใจ วิธีการใช้งาน: * สัญญาณ Buy (ลูกศรสีเขียวขึ้น): มองหาสัญญาณนี้เมื่อตลาดอยู่ในช่วง Sideways และราคาวิ่งลงมาแตะเส้นขอบล่าง (SD Low) * สัญญาณ Sell (ลูกศรสีแดงลง): มองหาสัญญาณนี้เมื่อตลาดอยู่ในช่วง Sideways และราคาวิ่งขึ้นไปแตะเส้นขอบบน (SD High) * การปรับแต่ง: คุณสามารถปรับค่า Cooldown Bars เพื่อให้ได้จำนวนลูกศรที่ต้องการ หากต้องการสัญญาณที่แม่นยำขึ้นแต่จำนวนน้อยลง ให้เพิ่มค่านี้ให้สูงขึ้น ข้อควรระวัง: * อินดิเคเตอร์นี้เป็นเพียงเครื่องมือวิเคราะห์ ไม่ใช่สัญญาณที่การันตีผลกำไร 100% * ควรใช้ประกอบกับการวิเคราะห์อื่นๆ เช่น รูปแบบแท่งเทียน, ปริมาณการซื้อขาย (Volume) และการจัดการความเสี่ยงที่เหมาะสม
อินดิเคเตอร์ Pine Script®
โดย Mr-7TRILL
Volume Pressure Analysis - Live DataVolume Pressure Gauge and Volume Percentage Indicator – Pine Script Guide This indicator provides a simplified, real-time visualization of both volume pressure (buy vs. sell activity) and today’s trading volume in comparison to historical averages. It is designed to help traders assess whether buyers or sellers dominate the current session and whether today’s volume is significant relative to recent behaviour. ________________________________________ Key Functional Segments 1. Inputs and Configuration Users can configure the length of the Simple Moving Average (SMA) used to calculate average volume, set the position of the gauge table on the chart, and toggle the visibility of the volume pressure display. This allows flexibility in integrating the tool with various trading styles and chart layouts. 2. Volume Data Calculations The indicator calculates three key volume metrics: • volToday: The current day’s volume. • volAvg: The average volume over the user-defined SMA period (default is 20 bars). • volPct: The current volume as a percentage of the average. This enables traders to quickly recognize whether current trading activity is above or below normal, which can be a precursor to potential trend strength or weakness. 3. Volume Pressure Calculation The script estimates buying and selling pressure based on price movement and volume. It distributes volume into upward (buy) and downward (sell) segments and expresses them as percentages of the total volume. This gives an immediate sense of whether bulls or bears are more active in the current session. 4. Visual Representation (Progress Bars) The indicator renders a simplified visual gauge using horizontal bar segments (pseudo-bars) to reflect the proportion of buy and sell pressure. The length of each bar correlates with the strength of pressure from buyers or sellers, helping users assess dominance without analyzing candlestick behavior in depth. 5. Table Display A compact table is drawn on the chart showing: • Buy pressure percentage and corresponding bar. • Sell pressure percentage and corresponding bar. • Volume percentage compared to the recent average. This format makes it easy to evaluate volume dynamics at a glance, without cluttering the price chart or relying on separate overlays. ________________________________________ How Traders Benefit from This Indicator • Momentum Shift Detection: Early signs of trend reversal can be observed when volume pressure flips direction. • Breakout Validation: High volume combined with dominant pressure supports the credibility of breakout moves. • False Move Avoidance: If price moves on low volume or mixed pressure, traders can avoid low-probability entries. • Market Context Awareness: Users can assess whether a day is behaving normally in terms of participation or is unusually quiet or aggressive. ________________________________________ Basic Usage Guide 1. Add the script to your TradingView chart and set your preferred SMA length for volume comparison. 2. Customize the table’s position using the X and Y settings for clarity and alignment. 3. Interpret the outputs: o A higher red bar indicates dominant sell pressure. o A higher green bar indicates dominant buy pressure. o Volume % above 100% suggests above-average activity, while values below 100% may imply low conviction. 4. Apply to trading decisions: o High buy pressure and high volume may indicate a strong long opportunity. o High sell pressure and high volume may support short setups. o Low volume or conflicting signals may call for caution. 5. Combine with other tools such as trend indicators, support/resistance zones, or price action patterns for more reliable trade setups. ________________________________________ Practical Example • Sell Pressure: 70% → Suggests strong seller control; potential for short setups. • Buy Pressure: 30% → Weak buying interest; long trades may carry risk. • Volume Percentage: 120% → Indicates a surge in participation; movement may have greater validity. ________________________________________ Tips for New Traders • Use this indicator as a confirmation tool rather than a standalone strategy. • Begin on higher timeframes (4-hour or daily) to develop familiarity. • Compare multiple examples to identify reliable patterns over time. • Always incorporate proper risk management, including stop losses. ________________________________________ Disclaimer from aiTrendview This indicator is intended solely for educational and informational use. It does not constitute investment advice, trade signals, or financial recommendations. aiTrendview and its affiliates are not liable for any trading losses incurred through use of this tool. All trading involves risk. Past performance of any indicator does not guarantee future results. Users should conduct independent research and consult with a certified financial advisor before making any trading decisions.
อินดิเคเตอร์ Pine Script®
โดย aiTrendview-Charting-System
LTHB & HTLB Zones with AlertsIn price action trading, the Lowest Tick of the Highest Bar (LTHB) and the Highest Tick of the Lowest Bar (HTLB) are important concepts for support/resistance identification, trend exhaustion, and reversal confirmation. Here's what they mean and why they matter: 🔹 Definitions 1. Lowest Tick of the Highest Bar (LTHB): The lowest price (tick) of the bar (candlestick) with the highest high in a recent price swing. Significance: It marks the support inside an upward swing. If price breaks below this, it often indicates loss of upward momentum or reversal. 2. Highest Tick of the Lowest Bar (HTLB): The highest price of the bar with the lowest low in a swing. Significance: It acts as a resistance inside a downward swing. If price moves above this, it can signal a bullish reversal. 🔸 Why Are They Significant? Concept LTHB HTLB Trend Reversal - Break below LTHB → possible bearish reversal Break above HTLB → possible bullish reversal Swing Confirmation -Holding above LTHB → continuation of uptrend Holding below HTLB → continuation of downtrend Trap Detection - Stop hunts often occur just below LTHB Stop hunts often occur just above HTLB Risk Management -Acts as logical stop-loss in long trades Acts as logical stop-loss in short trades 🔸 Uses in Strategy 1. Breakout Traders use these levels as entry triggers. 2. Reversal Traders look for price failing to hold these levels for early reversal signs. 3. Structure-Based Traders use them to confirm higher highs/lower lows. 4. Stop Placement: Tight stops just beyond LTHB/HTLB help manage risk in swing trades. 🔔 How to Set Alerts in TradingView: Add the script to your chart. Open the "⚠️ Alerts" tab. Click "Create Alert". In the "Condition" dropdown, select one of: Enter LTHB Zone Exit LTHB Zone Enter HTLB Zone Exit HTLB Zone Set desired alert frequency (e.g., once per bar or once). Click Create.
อินดิเคเตอร์ Pine Script®
โดย navedkhanart
3 Bar Reversal3 Bar Reversal This pattern is described in John Carter's "Mastering the Trade" The 3 Bar Reversal indicator is a simple but effective price action tool designed to highlight potential short-term reversals in market direction. It monitors consecutive bar behavior and identifies turning points based on a three-bar pattern. This tool can assist traders in spotting trend exhaustion or early signs of a reversal, particularly in scalping or short-term trading strategies. How It Works This indicator analyzes the relationship between consecutive bar closes: It counts how many bars have passed since the price closed higher than the previous close (barssince(close >= close )) — referred to as an "up streak". It also counts how many bars have passed since the price closed lower than the previous close (barssince(close <= close )) — known as a "down streak". A reversal condition is met when: There have been exactly 3 bars in a row moving in one direction (up or down), and The 4th bar closes in the opposite direction. When this condition is detected, the script performs two actions: Plots a triangle on the chart to signal the potential reversal: A green triangle below the bar for a possible long (buy) opportunity. A red triangle above the bar for a possible short (sell) opportunity. Triggers an alert condition so users can set notifications for when a reversal is detected. Interpretation Long Signal: The market has printed 3 consecutive lower closes, followed by a higher close — suggesting bullish momentum may be emerging. Short Signal: The market has printed 3 consecutive higher closes, followed by a lower close — indicating possible bearish momentum. These patterns are common in market retracements and can act as confirmation signals when used with other indicators such as RSI, MACD, support/resistance, or volume analysis. Usage Examples Scalping: Use the reversal signal to quickly enter short-term trades after a short-term exhaustion move. Swing Trading: Combine this with trend indicators (e.g., moving averages) to time pullbacks within larger trends. Confirmation Tool: Use this indicator alongside candlestick patterns or support/resistance zones to validate entry or exit points. Alert Setup: Enable alerts based on the built-in alertcondition to receive instant notifications for potential trade setups. Limitations The 3-bar reversal logic does not guarantee a trend change; it signals potential reversals, which may need confirmation. Best used in conjunction with broader context such as trend direction, market structure, or other technical indicators.
อินดิเคเตอร์ Pine Script®
โดย abbadon9
1
Long Explosive V1The “Long Explosive V1” strategy calculates the percentage change in price from the last closing price of the candlestick, so that if it increases by a certain percentage it goes long, but if it decreases by another percentage it sends an exit order, so that the percentage limits above and below the current price function as inherent stop loss and take profit, with the benefit of taking advantage of the volatility of the bull market. Entries and exits are always at the market and based on percentage changes in the price. Of course, the default configuration of the strategy considers a position with a 5% risk control, modest initial capital and standard commissions, which helps to obtain realistic results and protect the user from unexpectedly controlled potential losses. It is again emphasized that it is always advisable to adjust the parameters of the strategy well, so that the risk-reward is well controlled.
กลยุทธ์ Pine Script®
โดย Al-Juarismi-Lab
MestreDoFOMO Future Projection BoxMestreDoFOMO Future Projection Box - Description & How to Use Description The "MestreDoFOMO Future Projection Box" is a TradingView indicator tailored for crypto traders (e.g., BTC/USDT on 1H, 4H, or 1D timeframes). It visualizes current price ranges, projects future levels, and confirms trends using semi-transparent boxes. With labeled price levels and built-in alerts, it’s a simple yet powerful tool for identifying support, resistance, and potential price targets. How It Works Blue Box (Current Channel): Shows the recent price range over the last 10 bars (adjustable). The top is the highest high plus an ATR buffer, and the bottom is the lowest low minus the buffer. Labels display exact levels (e.g., "Top: 114000", "Bottom: 102600"). Green Box (Future Projection): Projects the price range 10 bars ahead (adjustable) based on the trend slope of the moving average. Labels show "Proj Top" and "Proj Bottom" for future targets. Orange Box (Moving Average): Traces a 50-period EMA (adjustable) to confirm the trend. An upward slope signals a bullish trend; a downward slope signals a bearish trend. A label shows the current MA value (e.g., "MA: 105000"). Alerts: Triggers when the price nears the projected top or bottom, helping you catch breakouts or retracements. How to Use Add the Indicator: Apply "MestreDoFOMO Future Projection Box" to your chart in TradingView. Interpret the Trend: Check the orange box’s slope—upward for bullish, downward for bearish. Identify Key Levels: Use the blue box’s top as resistance and bottom as support. On a 4H chart, if the top is 114,000, expect resistance; if the bottom is 102,600, expect support. Plan Targets: Use the green box for future targets—top for profit-taking (e.g., 114,000), bottom for stop-loss or buying (e.g., 102,600). Set Alerts: Enable alerts for "Near Upper Projection" or "Near Lower Projection" to get notified when the price hits key levels. Trade Examples: Bullish: If the price breaks above the blue box top (e.g., 114,000), buy with a target at the green box top. Set a stop-loss below the green box bottom. Bearish: If the price rejects at the blue box top and drops below the orange MA, short with a target at the blue box bottom. Customize: Adjust the lookback period, projection bars, ATR multiplier, and MA length in the settings to fit your trading style. Tips Use on 1H for short-term trades, 4H for swing trades, or 1D for long-term trends. Combine with volume or RSI to confirm signals. Validate levels with market structure (e.g., candlestick patterns).
อินดิเคเตอร์ Pine Script®
โดย MestreDoFOMO
MestreDoFOMO Renko Underground v4.0Description: The "MestreDoFOMO Renko Underground v4.0" is a custom indicator for TradingView that creates a dynamic Renko chart to help identify trends and reversal points in the market. Unlike traditional candlestick charts, Renko focuses solely on significant price movements, ignoring time and market noise. This script includes advanced features like support and resistance channels, moving averages, and alerts to assist with your trading decisions. How It Works: Dynamic Renko Bricks: The brick size (price units to form each "box" on the chart) is calculated automatically using the ATR (Average True Range) with an adjustable multiplier. This means the size adapts to the asset's volatility (e.g., BTC/USDT). When the price moves up or down by the brick size, a new brick is created (green for up, red for down). Reversal Signals: Green triangles (🔼) appear below bars when the trend shifts to bullish, and red triangles (🔽) appear above when it shifts to bearish. These signals only appear on direction changes, reducing false signals. Renko Channel: The script draws two lines (green for resistance and red for support) based on the highs and lows of the last 10 bricks (or the value you set). This helps identify key price zones. Moving Average on Bricks: An orange line shows the moving average (EMA or SMA, your choice) of the last 20 bricks, helping confirm the overall trend. Alerts: You can set up alerts in TradingView to be notified when the trend shifts to bullish or bearish, perfect for active trading. Visualization: A gray dashed line shows the level of the last brick, providing a clear reference for the next expected move. How to Use: Add the indicator to your chart (e.g., BTC/USDT 1D). Adjust parameters like the ATR multiplier, channel length, and moving average type in the settings menu. Watch the bricks and signals to identify trends, and use the channels and moving average to plan entries and exits. Enable alerts to receive real-time notifications. Tip: Test on different timeframes (1H, 4H, 1D) and adjust the ATR multiplier to match the volatility of the asset you're trading. Combine with other indicators (like RSI) for better results!
อินดิเคเตอร์ Pine Script®
โดย MestreDoFOMO
Buy and Sell Pressure Signals (Clean)This script identifies strong buy and sell pressure based purely on candlestick structure — no indicators, no clutter. It highlights key reversal or momentum candles using minimal visuals: 🔼 Green Triangle (Buy Pressure): A bullish candle with a large body and small upper/lower wicks, indicating strong upward momentum and buyer control. 🔽 Red Triangle (Sell Pressure): A bearish candle with a large body and small wicks, showing strong downward momentum and seller dominance. Designed for traders who prefer clean, price-action-based signals without text labels or distracting overlays. Ideal for scalping, trend confirmation, or identifying exhaustion zones.
อินดิเคเตอร์ Pine Script®
โดย hankfdh