เริ่มกันเลย

ค้นหาในสคริปต์สำหรับ "10万亿经济刺激计划"

Volume Profile [Makit0]VOLUME PROFILE INDICATOR v0.5 beta Volume Profile is suitable for day and swing trading on stock and futures markets, is a volume based indicator that gives you 6 key values for each session: POC, VAH, VAL, profile HIGH, LOW and MID levels. This project was born on the idea of plotting the RTH sessions Value Areas for /ES in an automated way, but you can select between 3 different sessions: RTH, GLOBEX and FULL sessions. Some basic concepts: - Volume Profile calculates the total volume for the session at each price level and give us market generated information about what price and range of prices are the most traded (where the value is) - Value Area (VA): range of prices where 70% of the session volume is traded - Value Area High (VAH): highest price within VA - Value Area Low (VAL): lowest price within VA - Point of Control (POC): the most traded price of the session (with the most volume) - Session HIGH, LOW and MID levels are also important There are a huge amount of things to know of Market Profile and Auction Theory like types of days, types of openings, relationships between value areas and openings... for those interested Jim Dalton's work is the way to come I'm in my 2nd trading year and my goal for this year is learning to daytrade the futures markets thru the lens of Market Profile For info on Volume Profile: TV Volume Profile wiki page at www.tradingview.com For info on Market Profile and Market Auction Theory: Jim Dalton's book Mind over markets (this is a MUST) BE AWARE: this indicator is based on the current chart's time interval and it only plots on 1, 2, 3, 5, 10, 15 and 30 minutes charts. This is the correlation table TV uses in the Volume Profile Session Volume indicator (from the wiki above) Chart Indicator 1 - 5 1 6 - 15 5 16 - 30 10 31 - 60 15 61 - 120 30 121 - 1D 60 This indicator doesn't follow that correlation, it doesn't get the volume data from a lower timeframe, it gets the data from the current chart resolution. FEATURES - 6 key values for each session: POC (solid yellow), VAH (solid red), VAL (solid green), profile HIGH (dashed silver), LOW (dashed silver) and MID (dotted silver) levels - 3 sessions to choose for: RTH, GLOBEX and FULL - select the numbers of sessions to plot by adding 12 hours periods back in time - show/hide POC - show/hide VAH & VAL - show/hide session HIGH, LOW & MID levels - highlight the periods of time out of the session (silver) - extend the plotted lines all the way to the right, be careful this can turn the chart unreadable if there are a lot of sessions and lines plotted SETTINGS - Session: select between RTH (8:30 to 15:15 CT), GLOBEX (17:00 to 8:30 CT) and FULL (17:00 to 15:15 CT) sessions. RTH by default - Last 12 hour periods to show: select the deph of the study by adding periods, for example, 60 periods are 30 natural days and around 22 trading days. 1 period by default - Show POC (Point of Control): show/hide POC line. true by default - Show VA (Value Area High & Low): show/hide VAH & VAL lines. true by default - Show Range (Session High, Low & Mid): show/hide session HIGH, LOW & MID lines. true by default - Highlight out of session: show/hide a silver shadow over the non session periods. true by default - Extension: Extend all the plotted lines to the right. false by default HOW TO SETUP BE AWARE THIS INDICATOR PLOTS ONLY IN THE FOLLOWING CHART RESOLUTIONS: 1, 2, 3, 5, 10, 15 AND 30 MINUTES CHARTS. YOU MUST SELECT ONE OF THIS RESOLUTIONS TO THE INDICATOR BE ABLE TO PLOT - By default this indicator plots all the levels for the last RTH session within the last 12 hours, if there is no plot try to adjust the 12 hours periods until the seesion and the periods match - For Globex/Full sessions just select what you want from the dropdown menu and adjust the periods to plot the values - Show or hide the levels you want with the 3 groups: POC line, VA lines and Session Range lines - The highlight and extension options are for a better visibility of the levels as POC or VAH/VAL THANKS TO @watsonexchange for all the help, ideas and insights on this and the last two indicators (Market Delta & Market Internals) I'm working on my way to a 'clean chart' but for me it's not an easy path @PineCoders for all the amazing stuff they do and all the help and tools they provide, in special the Script-Stopwatch at that was key in lowering this indicator's execution time All the TV and Pine community, open source and shared knowledge are indeed the best way to help each other IF YOU REALLY LIKE THIS WORK, please send me a comment or a private message and TELL ME WHAT you trade, HOW you trade it and your FAVOURITE SETUP for pulling out money from the market in a consistent basis, I'm learning to trade (this is my 2nd year) and I need all the help I can get GOOD LUCK AND HAPPY TRADING
อินดิเคเตอร์ Pine Script®
โดย makit0
64
BO - Bar M15 2/3 SignalBO - Bar M15 2/3 Signal show the signal to trade Binary Option with rule below: A. Indicator * Bollinger Band (20,2): avoid waterfall B. Rule of Signal 1. Rule1: Split Bar M15 to 3 part and load them on M5 chart (recommend use M5 IDC chart) 2. Rule 2: Delay 10' after bar M15 open => wait for price's pattern 3. Rule 3: Put Signal row 30-32 * Delay 10' after bar M15 open. * Direction of 1/3 and 2/3 Bar M15 is upward * close of 2/3 Bar M15 below upper band Bb(20,2) on M5 chart => avoid strong buy 4. Rule 4: Call Signal row 36-38 * Delay 10' after bar M15 open. * Direction of 1/3 and 2/3 Bar M15 is downward * close of 2/3 Bar M15 above lower band Bb(20,2) on M5 chart => avoid strong sell C. Recommend Expiry time: Bar M15 close * We try to catch the shadow of Bar M15 but dont trade when price run on the upper or lower band of BB(20,2,M5)
อินดิเคเตอร์ Pine Script®
โดย inno14
Cradle zone with BBand & SARHi All, I have combined a number of indicators all into this 1 option. It has the following: > The Cradle zone represents a methodology to using the 10 and 20 EMA's at your selected time-frame. Where the shading between the 10 and 20 EMA is green for an uptrend and red for a downtrend. Default EMAs 10, 12, 20, and 50 > Those who are familiar using the Cradle method will find this option convenient. > I have also added the Bollinger Band and Parabolic SAR as additional options to this item, to help give additional information by default. Good luck with your trading strategy. Please don't forget to give me a tick\like, as I would appreciate it. Regards, S.Sari /CryptoProspa
อินดิเคเตอร์ Pine Script®
โดย ssari
3
Point and Figure (PnF) Moving AveragesThis is live and non-repainting Point and Figure Chart Moving Averages tool. The script has it’s own P&F engine and not using integrated function of Trading View. Point and Figure method is over 150 years old. It consist of columns that represent filtered price movements. Time is not a factor on P&F chart but as you can see with this script P&F chart created on time chart. P&F chart provide several advantages, some of them are filtering insignificant price movements and noise, focusing on important price movements and making support/resistance levels much easier to identify. Moving averages on Point & Figure charts are based on the average price of each column while bar chart moving averages are based closing price. Average Price means (ClosePrice + OpenPrice) / 2. Because of there is double smoothing, you should use shorter lengths for moving averages. Double smoothing means: using average price smooths once, using length greater than 2 smooths price second time. If you are new to Point & Figure Chart then you better get some information about it before using this tool. There are very good web sites and books. Please PM me if you need help about resources. Options in the Script Box size is one of the most important part of Point and Figure Charting. Chart price movement sensitivity is determined by the Point and Figure scale. Large box sizes see little movement across a specific price region, small box sizes see greater price movement on P&F chart. There are four different box scaling with this tool: Traditional, Percentage, Dynamic (ATR), or User-Defined 4 different methods for Box size can be used in this tool. User Defined: The box size is set by user. A larger box size will result in more filtered price movements and fewer reversals. A smaller box size will result in less filtered price movements and more reversals. ATR: Box size is dynamically calculated by using ATR, default period is 20. Percentage: uses box sizes that are a fixed percentage of the stock's price. If percentage is 1 and stock’s price is $100 then box size will be $1 Traditional: uses a predefined table of price ranges to determine what the box size should be. Price Range Box Size Under 0.25 0.0625 0.25 to 1.00 0.125 1.00 to 5.00 0.25 5.00 to 20.00 0.50 20.00 to 100 1.0 100 to 200 2.0 200 to 500 4.0 500 to 1000 5.0 1000 to 25000 50.0 25000 and up 500.0 Default value is “ATR”, you may use one of these scaling method that suits your trading strategy. If ATR or Percentage is chosen then there is rounding algorithm according to mintick value of the security. For example if mintick value is 0.001 and box size (ATR/Percentage) is 0.00124 then box size becomes 0.001. And also while using dynamic box size (ATR or Percentage), box size changes only when closing price changed. Reversal : It is the number of boxes required to change from a column of Xs to a column of Os or from a column of Os to a column of Xs. Default value is 3 (most used). For example if you choose reversal = 2 then you get the chart similar to Renko chart. Source: Closing price or High-Low prices can be chosen as data source for P&F charting. Options for P&F Moving Averages: Moving averages on P&F charts are based on the average price of each column. Bar chart moving averages are based on each close price. While 10-day SMA on a bar chart is the average of the last ten closing prices, on a P&F chart, a 10-period SMA is the average price of the last 10 column averages. Average price means “(ClosePrice + OpenPrice) / 2” 2 P&F moving averages are shown on the chart. It can show Exponental Moving Average ( EMA ) or Simple Moving Average ( SMA ) Source: You can choose Close Price or Average Price as source. Default is Average Price. “Fast Length” and “Slow Length” are lengths for two moving averages. Default values are 1 and 5. “Fill between MAs” is the option to fill between Moving averages by predefined colors 'Lime/Blue', 'Lime/Red', 'Green/Red', 'Green/Blue', 'Blue/Red' There are alerts when Fast MA crossover or crossunder Slow MA. While adding alert “Once Per Bar Close” option should be chosen.
อินดิเคเตอร์ Pine Script®
โดย LonesomeTheBlue
3
Pocket Pivot IndicatorFrom Gil Morales and ‎Chris Kacher (O'Neil's disciples). Designed to find buy points in bases and continuation buy points in an uptrend. The volume today must be greater then the maximum down volume of the past 10 trading days. Recommended to use in conjunction with the 10 day and/or 50 day moving average. Typical use : Scan for pocket pivots. Is stock strong fundamentally? i.e- leader in it's sector Has the stock developed a base ?(see O'Neil's work for base discussion) Is the stock breaking through or bouncing off the 10 period sma? (can use 50 sma too) If so.. a possible buy. Cheers David
อินดิเคเตอร์ Pine Script®
โดย DavidOConnorSpain
18
Simplified SizingEnsure you Uncheck #1 , #2, #3 in the STYLE tab or it draws the lines you only need the numbers for. The first number is the deviation from the EMA , anything below 1.75 == 1. (less than 0.75 % deviation) NOTE: The fill area turns yellow @ 1.50 and red above 2.75 There are steps built in to slightly lower share size when specific levels of divergence register: From 1.75 to 10 , 1 == 1.10 (10% reduction) From 10 and up, 1 == 1.20 (20% reduction) The second number is the Average True Range , calculated by the input length (RMA smoothed) and a multiplier (in decimal form). NOTE: From 930-936 this value is multiplied by 1.5 The third number is the max share size. The 4th number is the lot price if you take a position at the max size. INPUTS: ATR Length EMA Length for divergence calculation ATR Multiplier (0.1 - 10) Equity in account Max loss per trade. Good Luck!
อินดิเคเตอร์ Pine Script®
โดย kmack282
Ultimate Moving Average Package (17 MA's)Included is the: VWAP Current time frame 10 EMA Current time frame 20 EMA Current time frame 50 EMA Current time frame 10 SMA Current time frame 20 SMA Current time frame 50 SMA Daily 10 EMA Daily 20 EMA Daily 50 EMA Daily 50 SMA Daily 100 SMA Daily 200 SMA Weekly 100 SMA Weekly 200 SMA Monthly 100 SMA Monthly 200 SMA All Daily/Weekly/Monthly MA's can be seen on intraday charts. Current time frame MA's change depending on your time frame. Obviously you dont need all 17 on your chart but you can pick the ones you like and disable the rest.
อินดิเคเตอร์ Pine Script®
โดย Craig_Stine
A.I.Driven Aggressive Intraday Models For 20190610(New to TradingView and trying to learn how best to share our daily Model Trades with the awesome community here. Still learning the tools here and may not be using the best approaches to publish ideas/charts/scirpts - please help us learn by suggesting best practices) >>>>> Model Trades Published pre-market this morning at tradersai blogspot <<<<< ***** Medium-Frequency Models*****: For today, Monday 06/10, our medium-frequency models indicate going long on a break above 2903 with a 10-point trailing stop, and going short on a break below 2845 with an 8-point trailing stop. ---Note: For the trades to trigger, the breaks should occur during the regular session hours starting at 9:30am ET. By design, these models do NOT open any new positions after 3:45pm. Only one open position at any given time.--- ***** Aggressive Intraday Models *****: For today, Monday 06/10, our aggressive intraday models indicate going long on a break above 2895 or 2886 or 2874 with an 8-point trailing stop, and going short on a break below 2890 or 2882 or 2870 with a 6-point trailing stop. ---- Note: For the trades to trigger, the breaks should occur during regular session hours starting at 9:30am ET. Due to the intraday nature of these aggressive models, they indicate closing any open trades at 3:55pm and remaining flat into the session close. No opening of new positions after 3:45pm. Only one open position at any given time.----
กลยุทธ์ Pine Script®
โดย TradersAICorp
Moving Gain Loss PercentTracks the percentage gain/loss in three ranges: single candle (can be turned on or off) custom range of candles custom range of candles For example, with a range of 3 candles, and the serie: 1 - close 10 2 - close 5 3 - close 20 The moving gain would be: 1 - close 10 - gain 10, infinite% 2 - close 5 - gain 5, infinite% 3 - close 18 - gain 8, 80% Or, for example if the range is 12 candles on a monthly chart, then the result is the Year-To-Date gain/loss plotted as a percentage.
อินดิเคเตอร์ Pine Script®
โดย givanse
3
Sexy RSI for sexy tradersHello fellow sexy traders. I was tired of constantly having to add my own horizontals/MAs to the default RSI so I decided to make this modification. The default settings include channels from 40-80 (green horizontals) for a bullish range, and 20-60 (red horizontals) for the bearish range. Also includes white line at 50 level, and blue horizontals at extremes (90 and 10). If RSI stays in one of the red or green range that can signify the trend direction, as directed by Andrew Cardwell (inventor of the RSI). If you wish for other levels to be included, just let me know! Comment on here or dm me on twitter @boss_charts and I can add the settings for you, so all you have to do is click a button and it will set it to your desired config. I want this to be a tool that is useful for heavy traders to save them time. Additionally, in order to tell the level of the RSI and how overextended it might be, I added the setting for the RSI to change color depending on its level. Current settings are as follows: Normal RSI (30-70) = PURPLE Conventional Overbought/Oversold (30-20 + 70-80) = RED 1st extended (20-15 + 80-85) = PINK 2nd extended (15-10 + 85-90) = ORANGE VERY EXTENDED (<10 + >90) = YELLOW That way you can get an idea of how drastic a move is by the color alone. According to Dr. Cardwell, a drastic move to over/under extended can be a sign of strength. Finally, there are the default MAs added that Mr. Cardwell defines as useful for defining the trend. These being the 9 MA and 45 EMA/WMA. The strategy with these is to have the MAs on both price and RSI. If the 9MA is above the 45 MA on both price and RSI, then this is bullish and you can look for longs. Conversely, if the 9 is below the 45 on both RSI and price that is bearish, and you can look for shorts. I added the background color change for the points where the MAs cross each other, so you do not have to have the MAs fogging up your charts to know where they are relative to one another. This is similar to my MA cross indicator which contains the same functionality. Never financial advice. Backtest it for yourself and find MA configurations that work for you. Enjoy! Feel free to send feedback/requests whenever.
อินดิเคเตอร์ Pine Script®
โดย number_juan
Multi SMA EMA WMA HMA BB (5x8 MAs Bollinger Bands) MAX MTF - RRBMulti SMA EMA WMA HMA 4x7 Moving Averages with Bollinger Bands MAX MTF by RagingRocketBull 2019 Version 1.0 All available MAX MTF versions are listed below (They are very similar and I don't want to publish them as separate indicators): ver 1.0: 4x7 = 28 MTF MAs + 28 Levels + 3 BB = 59 < 64 ver 2.0: 5x6 = 30 MTF MAs + 30 Levels + 3 BB = 63 < 64 ver 3.0: 3x10 = 30 MTF MAs + 30 Levels + 3 BB = 63 < 64 ver 4.0: 5(4+1)x8 = 8 CurTF MAs + 32 MTF MAs + 20 Levels + 3 BB = 63 < 64 ver 5.0: 6(5+1)x6 = 6 CurTF MAs + 30 MTF MAs + 24 Levels + 3 BB = 63 < 64 ver 6.0: 4(3+1)x10 = 10 CurTF MAs + 30 MTF MAs + 20 Levels + 3 BB = 63 < 64 Fib numbers: 8, 13, 21, 34, 55, 89, 144, 233, 377 This indicator shows multiple MAs of any type SMA EMA WMA HMA etc with BB and MTF support, can show MAs as dynamically moving levels. There are 4 MA groups + 1 BB group, a total of 4 TFs * 7 MAs = 28 MAs. You can assign any type/timeframe combo to a group, for example: - EMAs 9,12,26,50,100,200,400 x H1, H4, D1, W1 (4 TFs x 7 MAs x 1 type) - EMAs 8,13,21,30,34,50,55,89,100,144,200,233,377,400 x M15, H1 (2 TFs x 14 MAs x 1 type) - D1 EMAs and SMAs 8,13,21,30,34,50,55,89,100,144,200,233,377,400 (1 TF x 14 MAs x 2 types) - H1 WMAs 13,21,34,55,89,144,233; H4 HMAs 9,12,26,50,100,200,400; D1 EMAs 12,26,89,144,169,233,377; W1 SMAs 9,12,26,50,100,200,400 (4 TFs x 7 MAs x 4 types) - +1 extra MA type/timeframe for BB There are several versions: Simple, MTF, Pro MTF, Advanced MTF, MAX MTF and Ultimate MTF. This is the MAX MTF version. The Differences are listed below. All versions have BB - Simple: you have 2 groups of MAs that can be assigned any type (5+5) - MTF: +2 custom Timeframes for each group (2x5 MTF) +1 TF for BB, TF XY smoothing - Pro MTF: 4 custom Timeframes for each group (4x3 MTF), 1 TF for BB, MA levels and show max bars back options - Advanced MTF: +4 extra MAs/group (4x7 MTF), custom Ticker/Symbols, Timeframe <>= filter, Remove Duplicates Option - MAX MTF: +2 subtypes/group, packed to the limit with max possible MAs/TFs: 4x7, 5x6, 3x10, 4(3+1)x10, 5(4+1)x8, 6(5+1)x6 - Ultimate MTF: +individual settings for each MA, custom Ticker/Symbols MAX MTF version tests the limits of Pinescript trying to squeeze as many MAs/TFs as possible into a single indicator. It's basically a maxed out Advanced version with subtypes allowing for mixed types within a group (i.e. both emas and smas in a single group/TF) Pinescript has the following limits: - max 40 security calls (6 calls are reserved for dupe checks and smoothing, 2 are used for BB, so only 32 calls are available) - max 64 plot outputs (BB uses 3 outputs, so only 61 plot outputs are available) - max 50000 (50kb) size of the compiled code Based on those limits, you can only have the following MAs/TFs combos in a single script: 1. 4x7, 5x6, 3x10 - total number of MTF MAs must always be <= 32, and you can still have BB and Num Levels = total MAs, without any compromises 2. 5(4+1)x8, 6(5+1)x6, 4(3+1)x10 - you can use the Current Symbol/Timeframe as an extra (+1) fixed TF with the same number of MTF MAs - you don't need to call security to display MAs on the Current Symbol/Timeframe, so the total number of MTF MAs remains the same and is still <= 32 - to fit that many MAs into the max 64 plot outputs limit you need to reduce the number of levels (not every MA Group will have corresponding levels) Features: - 4x7 = 28 MAs of any type - 4x MTF groups with XY step line smoothing - +1 extra TF/type for BB MAs - 2 MA subtypes within each group/TF - 4x7 = 28 MA levels with adjustable group offsets, indents and shift - supports any existing type of MA: SMA, EMA, WMA, Hull Moving Average (HMA) - custom tickers/symbols for each group - show max bars back option - show/hide both groups of MAs/levels/BB and individual MAs - timeframe filter: show only MAs/Levels with TFs <>= Current TF - hide MAs/Levels with duplicate TFs - support for custom TFs that are not available in free accounts: 2D, 3D etc - support for timeframes in H: H, 2H, 4H etc Notes: - Uses timeframe textbox instead of input resolution dropdown to allow for 240 120 and other custom TFs - Uses symbol textbox instead of input symbol to avoid establishing multiple dummy security connections to the current ticker - otherwise empty symbols will prevent script from running - Possible reasons for missing MAs on a chart: - there may not be enough bars in history to start plotting it. For example, W1 EMA200 needs at least 200 bars on a weekly chart. - for charts with low/fractional prices i.e. 0.00002 << 0.001 (default Y smoothing step) decrease Y smoothing as needed (set Y = 0.0000001) or disable it completely (set X,Y to 0,0) - for charts with high price values i.e. 20000 >> 0.001 increase Y smoothing as needed (set Y = 10-20). Higher values exceeding MAs point density will cause it to disappear as there will be no points to plot. Different TFs may require diff adjustments - TradingView Replay Mode UI and Pinescript security calls are limited to TFs >= D (D,2D,W,MN...) for free accounts - attempting to plot any TF < D1 in Replay Mode will only result in straight lines, but all TFs will work properly in history and real-time modes. This is not a bug. - Max Bars Back (num_bars) is limited to 5000 for free accounts (10000 for paid), will show error when exceeded. To plot on all available history set to 0 (default) - Slow load/redraw times. This indicator becomes slower, its UI less responsive when: - Pinescript Node.js graphics library is too slow and inefficient at plotting bars/objects in a browser window. Code optimization doesn't help much - the graphics engine is the main reason for general slowness. - the chart has a long history (10000+ bars) in a browser's cache (you have scrolled back a couple of screens in a max zoom mode). - Reload the page/Load a fresh chart and then apply the indicator or - Switch to another Timeframe (old TF history will still remain in cache and that TF will be slow) - in max possible zoom mode around 4500 bars can fit on 1 screen - this also slows down responsiveness. Reset Zoom level - initial load and redraw times after a param change in UI also depend on TF. For example: D1/W1 - 2 sec, H1/H4 - 5-6 sec, M30 - 10 sec, M15/M5 - 4 sec, M1 - 5 sec. M30 usually has the longest history (up to 16000 bars) and W1 - the shortest (1000 bars). - when indicator uses more MAs (plots) and timeframes it will redraw slower. Seems that up to 5 Timeframes is acceptable, but 6+ Timeframes can become very slow. - show_last=last_bars plot limit doesn't affect load/redraw times, so it was removed from MA plot - Max Bars Back (num_bars) default/custom set UI value doesn't seem to affect load/redraw times - In max zoom mode all dynamic levels disappear (they behave like text) - Dupe check includes symbol: symbol, tf, both subtypes - all must match for a duplicate group - For the dupe check to work correctly a custom symbol must always include an exchange prefix. BB is not checked for dupes Good Luck! Feel free to learn from/reuse the code to build your own indicators.
อินดิเคเตอร์ Pine Script®
โดย RagingRocketBull
12
APEX - WaveTrend [v1]WaveTrend is a smoothed oscillator which enables it to detect true reversals in an extremely accurate manner. The beauty of this indicator is that does not generate signals during choppy sideways markets. The basic settings are 10 / 3 / 4 these are very aggressive settings, that will generate a lot of signals in all even not so volatile markets. If you need high-quality signals you settings close to 10 / 3 /21. The strongest buy/sell signals are given when the cross occurs above or below the threshold. In the 10 / 3 / 4 you threshold for buy should be around -90 values. If you use the very smoothed variant the threshold will be around -45 to -50 values. This indicator will be first available in APEX v1 currently being beta tested.
อินดิเคเตอร์ Pine Script®
โดย QuantTherapy
1
Schaff Trend Cycle 1.1 with signal codingThis is an edit of Lazy Bear's Schaff Trend Cycle original description here. I've added in the syntax so that you can generate an alert when it crosses the threshold in either direction. Just tick the box to show threshold crosses. More background on the indicator is here. www.investopedia.com Other common settings are fast 23 slow 53 or 10/30, 3/10. I have also set it to 9/20 for test purposes. They have different pluses and minuses on different timeframes.
อินดิเคเตอร์ Pine Script®
โดย ippp0031
Double EMA & ALMA StrategyThe ALMA (50 period) acts as the main trend filter, meaning that long positions are taken above the ALMA and short positions are taken below the ALMA. For instance, the 5 and 10 period exponential moving averages are added on the chart to give early signals to the trend. Therefore, when the 5/10 EMA triggers a bullish crossover, long signals are taken when price is above the ALMA, likewise, when the 5/10 EMA triggers a bearish crossover, short signals are taken when price is below the ALMA. Find out optimal values by trying. May not produce accurate results in horizontal markets. Thank you.
กลยุทธ์ Pine Script®
โดย The_Oracle_Of_Delphi
2
Inverted Yield Curve with VIX Fear IndexUS 2 year and US 10 year comparison, inverted yield curve with VIX. I use this on a weekly chart with 2 moving averages, the 40 week (ma200 daily) and the 520 week (10 year median). The bottom histogram is the VIX and the plot is the yield curve. When the VIX is above a certain level (you can set it in settings) and the ýield curve is close to or at inversion the background goes red. The last seven recessions were preceded by an inverted yield curve. Here I combined the two main fear indexes, the VIX and the run for safe US treasuries (Inverted Yield Curve). This is preset to the 2 year and 10 year US bond, weekly, and the normal VIX ticker but you can set it to whatever you like. Published with source code for anyone to modify. Please comment below if you do so! This is the second in a series of indicators I intend to publish as a package of economic recoverty/recession symptom indicators. Follow me for updates, next one up is commodities with dr Copper and oil!
อินดิเคเตอร์ Pine Script®
โดย monotones
2
Advanced Larry Williams 9.2- By EduHit rate greater than Setup 9.1 However, the stop of this setup becomes more expensive in certain situations. PURCHASE SIGN 1 - Paper comes in a bullish trend in the operational term to be operated. 2 - Exponential moving average of 9 upward periods. 3 - Wait for a candle to make the largest closing (candle reference). 4 - If the next candle CLOSES below the minimum of the candle reference the setup is armed. 5 - Mark the candle maxim that closed below the reference. It's the trigger! 6 - If the next candle exceeds this maximum by 1 cent the trade is triggered. Put the stop loss at the low of the candle that closed below (0.01 to 0.10 below) 7 - If the next candle does not fire, let's lower the trigger to the lower maximums, SINCE the mm9exp does not turn down. 8 - It exceeded the maximum we will have the entrance. 9 - Original stop-loss in the minimum of the candle we set the maximum activated. SIGN OF SALE 1 - Paper comes in a downtrend in the operating period to be operated. 2 - Exponential moving average of 9 periods descending. 3 - Wait for a candle that makes the lowest closing (candle reference). 4 - If the next candle CLOSE above the maximum of the reference candle the setup is armed. 5 - Bookmark the candle that closed above the reference. It's the trigger! 6 - If the next candle breaks this minimum, the trade is triggered. 7 - Place the stop-loss at the maximum of the candle that closed up. 8 - If the next candle does not trigger, we will raise the trigger to the highest minimums SINCE the exponential moving average of 9 periods does not turn upwards. 9 - It broke the minimum we will have the entrance. 10 - Stop-loss original in the maximum of the candle that we set the minimum activated. ********************************************************************************************************************************************************* Índice de acerto Superior ao Setup 9.1 Porém o stop deste setup acaba se tornando mais caro em determinadas situações. SINAL DE COMPRA 1 - Papel vem em tendência de alta no prazo operacional a ser operado. 2 - Média móvel exponencial de 9 períodos ascendente. 3 - Aguardar um candle que faça o maior fechamento (candle referência). 4 - Se o próximo candle FECHAR abaixo da mínima do candle referência o setup está armado. 5 - Marcar a máxima do candle que fechou abaixo do referência. É o gatilho! 6 - Se o próximo candle superar essa máxima em 1 centavo o trade é acionado. Colocar o stop-loss na mínima do candle que fechou abaixo (0,01 a 0,10 abaixo) 7 - Se o próximo candle não acionar, vamos abaixando o gatilho para as máximas menores DESDE QUE a mm9exp não vire para baixo. 8 - Superou a máxima teremos a entrada. 9 - Stop-loss original na mínima do candle que marcamos a máxima ativada. SINAL DE VENDA 1 - Papel vem em tendência de baixa no prazo operacional a ser operado. 2 - Média móvel exponencial de 9 períodos descendente. 3 - Aguardar um candle que faça o menor fechamento (candle referência). 4 - Se o próximo candle FECHAR acima da máxima do candle referência o setup está armado. 5 - Marcar a mínima do candle que fechou acima do referência. É o gatilho! 6 - Se o próximo candle romper essa mínima o trade é acionado. 7 - Colocar o stop-loss na máxima do candle que fechou acima. 8 - Se o próximo candle não acionar, vamos levantando o gatilho para as mínimas maiores DESDE QUE a média móvel exponencial de 9 períodos não vire para cima. 9 - Rompeu a mínima teremos a entrada. 10 - Stop-loss original na máxima do candle que marcamos a mínima ativada.
อินดิเคเตอร์ Pine Script®
โดย eduopc
1
Reset Every (Price)Someone requested a high/low price indicator that would reset the "remembered" prices daily. I started out doing just that, and then decided to make it much more configurable. Choose the units (minutes, hours, days, weeks, months) and the number of those units, and this will reset the highest/lowest value remembered to the current values on your chosen time interval. This should work with any time interval you desire, within reason...asking for resets every 4000 hours on a monthly chart will probably not work. GE, monthly, every 7 months: Ford, weekly, every 18 months: Dow Jones Industrial Average, weekly, every 90 days: LTCBTC, daily, every 10 days: ETHUSD, 30 minutes, every 10 days: BTCUSD, 1 minute, every 10 hours: EURUSD, 1 minute, every 50 minutes: Also, I am about to publish another version of this with just one source input that can be applied to any indicator...stay tuned!
อินดิเคเตอร์ Pine Script®
โดย Lemrin
3
XPloRR MA-Trailing-Stop StrategyXPloRR MA-Trailing-Stop Strategy Long term MA-Trailing-Stop strategy with Adjustable Signal Strength to beat Buy&Hold strategy None of the strategies that I tested can beat the long term Buy&Hold strategy. That's the reason why I wrote this strategy. Purpose: beat Buy&Hold strategy with around 10 trades. 100% capitalize sold trade into new trade. My buy strategy is triggered by the fast buy EMA (blue) crossing over the slow buy SMA curve (orange) and the fast buy EMA has a certain up strength. My sell strategy is triggered by either one of these conditions: the EMA(6) of the close value is crossing under the trailing stop value (green) or the fast sell EMA (navy) is crossing under the slow sell SMA curve (red) and the fast sell EMA has a certain down strength. The trailing stop value (green) is set to a multiple of the ATR(15) value. ATR(15) is the SMA(15) value of the difference between the high and low values. The scripts shows a lot of graphical information: The close value is shown in light-green. When the close value is lower then the buy value, the close value is shown in light-red. This way it is possible to evaluate the virtual losses during the trade. the trailing stop value is shown in dark-green. When the sell value is lower then the buy value, the last color of the trade will be red (best viewed when zoomed)(in the example, there are 2 trades that end in gain and 2 in loss (red line at end)) the EMA and SMA values for both buy and sell signals are shown as a line the buy and sell(close) signals are labeled in blue How to use this strategy? Every stock has it's own "DNA", so first thing to do is tune the right parameters to get the best strategy values voor EMA , SMA, Strength for both buy and sell and the Trailing Stop (#ATR). Look in the strategy tester overview to optimize the values Percent Profitable and Net Profit (using the strategy settings icon, you can increase/decrease the parameters) Then keep using these parameters for future buy/sell signals only for that particular stock. Do the same for other stocks. Important : optimizing these parameters is no guarantee for future winning trades! Here are the parameters: Fast EMA Buy: buy trigger when Fast EMA Buy crosses over the Slow SMA Buy value (use values between 10-20) Slow SMA Buy: buy trigger when Fast EMA Buy crosses over the Slow SMA Buy value (use values between 30-100) Minimum Buy Strength: minimum upward trend value of the Fast SMA Buy value (directional coefficient)(use values between 0-120) Fast EMA Sell: sell trigger when Fast EMA Sell crosses under the Slow SMA Sell value (use values between 10-20) Slow SMA Sell: sell trigger when Fast EMA Sell crosses under the Slow SMA Sell value (use values between 30-100) Minimum Sell Strength: minimum downward trend value of the Fast SMA Sell value (directional coefficient)(use values between 0-120) Trailing Stop (#ATR): the trailing stop value as a multiple of the ATR(15) value (use values between 2-20) Example parameters for different stocks (Start capital: 1000, Order=100% of equity, Period 1/1/2005 to now) compared to the Buy&Hold Strategy(=do nothing): BEKB(Bekaert): EMA-Buy=12, SMA-Buy=44, Strength-Buy=65, EMA-Sell=12, SMA-Sell=55, Strength-Sell=120, Stop#ATR=20 NetProfit: 996%, #Trades: 6, %Profitable: 83%, Buy&HoldProfit: 78% BAR(Barco): EMA-Buy=16, SMA-Buy=80, Strength-Buy=44, EMA-Sell=12, SMA-Sell=45, Strength-Sell=82, Stop#ATR=9 NetProfit: 385%, #Trades: 7, %Profitable: 71%, Buy&HoldProfit: 55% AAPL(Apple): EMA-Buy=12, SMA-Buy=45, Strength-Buy=40, EMA-Sell=19, SMA-Sell=45, Strength-Sell=106, Stop#ATR=8 NetProfit: 6900%, #Trades: 7, %Profitable: 71%, Buy&HoldProfit: 2938% TNET(Telenet): EMA-Buy=12, SMA-Buy=45, Strength-Buy=27, EMA-Sell=19, SMA-Sell=45, Strength-Sell=70, Stop#ATR=14 NetProfit: 129%, #Trade
กลยุทธ์ Pine Script®
โดย XPl0RR
8
Renko Price Bars Overlay// Shows the price renko bars (or range bars) instead of the PERIOD renko // bars that are integrated into Trading View. The normal renko bars that // Trading View offers only consider the drawing of a new brick when the // price closes above or below the required brick size. This can produce // misleading charts since depending on the time interval of a chart, new // bricks may or may not be drawn. True price renko bars will draw a new // brick immediately upon the price exceeding the next target brick size. // When running this script in "Traditional" mode, the painting of the // brick overlay band is INDEPENDENT of the chart interval. If price // exceeds the required target price for the next brick, the band is // updated immediately, instead of waiting for the price bar on the chart // interval to close first. The brick starting anchor point will attempt // to be a "nice number" at a round interval for the chart ticker. For // example, if viewing EURUSD with the box size equal to 50 ticks/pips, // the open and close prices will take the form of 1.2100, 1.2150, 1.2200, // 1.2250, and so on. This is the same behavior as the normal traditional // Renko bars in Trading View and other major trading platforms such as // Meta Trader. // Use the tick size in traditional mode to specify the block size, in // ticks. This may give interesting results in FOREX pairs... as the tick // size in Trading View may be 0.00001 instead of the normal pip size of // 0.0001, so a 10 pip block size may be '100', and not the expected '10'. // FOREX futures should work in the manner expected, a 10 pip block size // will indeed equal 0.0010. // The "ATR" mode functions differently than the Trading View built in // version. The block size is updated each time the range is exceeded. // In Trading View, when using the ATR mode, the ATR is the last ATR // value calculated on the ENTIRE data interval, and is applied to all // past data. You can see this when you press the '+' sign of the ticker // in the top left of the chart window and you will see the brick size // as a constant, the brick size is not a function of the ever changing // ATR value of the price action. The block size of this script is not // updated for each price candle (i.e. each 1HR on a 1HR chart), instead // it is updated only when the price thresholds are exceeded requiring a // the band to be updated. At that point the current ATR is considered // and the brick size is updated. // Options exist to show the current high and low of the brick, and to // show the required levels that the price must exceed to draw a new // brick and update the band. Please leave comments if you notice any bugs or would like any new features added. I don't find much use for plotting the H/L of the current renko candle, but I have seen some request it in the past. Cheers.
อินดิเคเตอร์ Pine Script®
โดย mortdiggiddy
67
Volume Range EventsChanges in the feelings (positive, negative, neutral) in the market concerning the valuation of an instrument are often preceded with sudden outbursts of buying and selling frenzies. The aim of this indicator is to report such outbursts. We can see them as expansions of volume, sometimes 10 times more than usual. and as extensions of the trading range, also sometimes 10 times more than usual (e.g. usual range is 10 cent suddenly a whole dollar.) The changes are calculated in such a way that these fit between plus and minus 100 percent, the bars are scaled in some sort of logarithmic way. The Emoline is the same as the one in the True Balance of Power indicator, which I already published ONLY RISES ARE EVENTS Sometimes analysts are tempted to give meaning to low volume or small ranges. These simply mean that the market has little interest in trading this instrument. I believe that in such cases the trader needs to wait for expansion and extension events to happen, then he can make a better guess of where the market is heading. As events often mark the beginning or ending of a trend, this indicator provides an early and clear signal, because it doesn’t bother us about non-events. WHAT IS USUAL? If the algorithm would use an average as a normal to scale volume or range events, then previous peaks will act as spoilers by making the average so high that a following peak is scaled too small. I developed a function, usual() , that kicks out all extremes of a ‘population of values’ and which returns the average of the non-extreme values. It can be called with any serial. This function is called by both algorithms that report volume and range peaks, which guarantees that the results are really comparable. As this function has a fixed look back of 8 periods, we might state that ‘usual’ is a short lived relative value. I think this doesn’t matter for the practical use of the indicator. COLORING AND INTERPRETATION I follow the categories in the ‘Better Volume Indicator’, published by LeazyBear, these are: 1. Climactic Volumes, event >40 % (this means peak is 1.5 X usual) LIME: Climax Buying Volume, direction up, range event also > 30 % RED: Climax Selling Volume, direction down, range event also > 30 % AQUA: Climax Churning Volume, both directions, range event < 30% 2. Smaller Volumes, event <40 % GREEN: Supportive Volume, both directions, if combined with range event BLUE: Churning Volume, both directions, if not combined with range event (Professional Trading) 3. Just Range Events BLACK histogram bars (Amateurish Trading)
อินดิเคเตอร์ Pine Script®
โดย eykpunter
7
Forex Master v4.0 (EUR/USD Mean-Reversion Algorithm)DESCRIPTION Forex Master v4.0 is a mean-reversion algorithm currently optimized for trading the EUR/USD pair on the 5M chart interval. All indicator inputs use the period's closing price and all trades are executed at the open of the period following the period where the trade signal was generated. There are 3 main components that make up Forex Master v4.0: I. Trend Filter The algorithm uses a version of the ADX indicator as a trend filter to trade only in certain time periods where price is more likely to be range-bound (i.e., mean-reverting). This indicator is composed of a Fast ADX and a Slow ADX, both using the same look-back period of 50. However, the Fast ADX is smoothed with a 6-period EMA and the Slow ADX is smoothed with a 12-period EMA. When the Fast ADX is above the Slow ADX, the algorithm does not trade because this indicates that price is likelier to trend, which is bad for a mean-reversion system. Conversely, when the Fast ADX is below the Slow ADX, price is likelier to be ranging so this is the only time when the algorithm is allowed to trade. II. Bollinger Bands When allowed to trade by the Trend Filter, the algorithm uses the Bollinger Bands indicator to enter long and short positions. The Bolliger Bands indicator has a look-back period of 20 and a standard deviation of 1.5 for both upper and lower bands. When price crosses over the lower band, a Long Signal is generated and a long position is entered. When price crosses under the upper band, a Short Signal is generated and a short position is entered. III. Money Management Rule 1 - Each trade will use a limit order for a fixed quantity of 50,000 contracts (0.50 lot). The only exception is Rule Rule 2 - Order pyramiding is enabled and up to 10 consecutive orders of the same signal can be executed (for example: 14 consecutive Long Signals are generated over 8 hours and the algorithm sends in 10 different buy orders at various prices for a total of 350,000 contracts). Rule 3 - Every order will include a bracket with both TP and SL set at 50 pips (note: the algorithm only closes the current open position and does not enter the opposite trade once a TP or SL has been hit). Rule 4 - When a new opposite trade signal is generated, the algorithm sends in a larger order to close the current open position as well as open a new one (for example: 14 consecutive Long Signals are generated over 8 hours and the algorithm sends in 10 different buy orders at various prices for a total of 350,000 contracts. A Short Signal is generated shortly after the 14th Long Signal. The algorithm then sends in a sell order for 400,000 contracts to close the 350,000 contracts long position and open a new short position of 50,000 contracts).
กลยุทธ์ Pine Script®
โดย Stable_Camel
16