เริ่มกันเลย

ค้นหาในสคริปต์สำหรับ "富时中国50期指"

The Lazy Trader - Index (ETF) Trend Following Robot50/150 moving average, index (ETF) trend following robot. Coded for people who cannot psychologically handle dollar-cost-averaging through bear markets and extreme drawdowns (although DCA can produce better results eventually), this robot helps you to avoid bear markets. Be a fair-weathered friend of Mr Market, and only take up his offer when the sun is shining! Designed for the lazy trader who really doesn't care... Recommended Chart Settings: Asset Class: ETF Time Frame: Daily Necessary ETF Macro Conditions: a) Country must have healthy demographics, good ratio of young > old b) Country population must be increasing c) Country must be experiencing price-inflation Default Robot Settings: Slow Moving Average: 50 (integer) //adjust to suit your underlying index Fast Moving Average: 150 (integer) //adjust to suit your underlying index Bullish Slope Angle: 5 (degrees) //up angle of moving averages Bearish Slope Angle: -5 (degrees) //down angle of moving averages Average True Range: 14 (integer) //input for slope-angle formula Risk: 100 (%) //100% risk means using all equity per trade ETF Test Results (Default Settings): SPY (1993 to 2020, 27 years), 332% profit, 20 trades, 6.4 profit factor, 7% drawdown EWG (1996 to 2020, 24 years), 310% profit, 18 trades, 3.7 profit factor, 10% drawdown EWH (1996 to 2020, 24 years), 4% loss, 26 trades, 0.9 profit factor, 36% drawdown QQQ (1999 to 2020, 21 years), 232% profit, 17 trades, 3.6 profit factor, 2% drawdown EEM (2003 to 2020, 17 years), 73% profit, 17 trades, 1.1 profit factor, 3% drawdown GXC (2007 to 2020, 13 years), 18% profit, 14 trades, 1.3 profit factor, 26% drawdown BKF (2009 to 2020, 11 years), 11% profit, 13 trades, 1.2 profit factor, 33% drawdown A longer time in the markets is better, with the exception of EWH. 6 out of 7 tested ETFs were profitable, feel free to test on your favourite ETF (default settings) and comment below. Risk Warning: Not tested on commodities nor other financial products like currencies (code will not work), feel free to leave comments below. Moving Average Slope Angle Formula: Reproduced and modified from source:
กลยุทธ์ Pine Script®
โดย UnknownUnicorn1373033
3
50-Line Oscillator // (\_/) // ( •.•) // (")_(") 25-Line Oscillator Description: The 25-Line Oscillator is a sophisticated technical analysis tool designed to visualize market trends through the use of multiple Simple Moving Averages (SMAs). This indicator computes a series of 26 SMAs, incrementally increasing the base length, providing traders with a comprehensive view of price dynamics. Features: Customizable Base Length: Adjust the base length of the SMAs according to trading preferences, enhancing versatility for different market conditions. Rainbow Effect: The indicator employs a visually appealing rainbow color scheme to differentiate between the various trend lines, making it easy to identify crossovers and momentum shifts. Crossovers Detection: The script includes logic to detect crossover events between consecutive trend lines, which can serve as signals for potential entry or exit points in trading. Clear Visualization: Suitable for both novice and seasoned traders, the plots enable quick interpretation of trends and market behavior. How to Use: Add the indicator to your chart and customize the base length as desired. Observe the rainbow-colored lines for trend direction. Look for crossover events between the SMAs as potential trading signals. Application: This indicator is particularly useful for swing traders and trend followers who aim to capitalize on market momentum and identify reversals. By monitoring the behavior of multiple SMAs, traders can gain insights into the strength and direction of price movements over various time frames.
อินดิเคเตอร์ Pine Script®
โดย FollowtheWhiteRabbitz
50/100/200 Moving Averages (Pine Script For Copy)by fresca SCRIPT LANGUAGE Copy script below and adjust based on your preferences. -function (change function from "sma" to "ema", "wma" and more) -length (25 Day, 150 Day or add more averages to the three in this script.) -color, (red, yellow, etc. or use color hex codes i.e. #FEDA15, #FFAD8F, etc.) -transparency (set to desired level 1-100) Or add more options. RESOURCES Color hex codes site: www.canva.com Trading View Pine Script Editor Reference Guide: www.tradingview.com
อินดิเคเตอร์ Pine Script®
โดย manifresca
9
QQQ TimingThis is a trend-following position trading strategy designed for the QQQ and the leveraged ETF QLD (ProShares Ultra QQQ). The primary goal is to capture multi-month holds for maximal profit. Key Instruments & Performance The strategy performs best with QLD, which yields far superior results compared to QQQ. TQQQ (triple-leveraged) results in higher drawdowns and is not the optimal choice. Important: The system is not intended for use with other indexes, individual stocks, or investments (like crypto or gold), as performance can vary widely. Buy Signals The strategy's signals are rooted in the S&P 500 Index (SPX), as testing showed it provides more reliable triggers than using QQQ itself. Primary Buy Signal (Credit to IBD/Mike Webster): The SPX triggers a buy when its low closes above the 21-day Exponential Moving Average (EMA) for three consecutive days. Refinement with Downtrend Lines: During corrective or bear periods, results and drawdowns can be significantly improved by incorporating downtrend lines. These lines connect lower highs. The strategy waits for the price to close above a drawn downtrend line before executing a buy. This refinement can modify the primary signal, either by allowing for an earlier entry or, in some cases, completely nullifying a false signal until the trend change proves itself. Risk Management & Exit Strategy Initial Buy Risk: A 3.7% stop loss is applied immediately upon the initial entry. Initial Exit Rule: An exit is required if the QQQ's low drops below the 50-day Simple Moving Average (SMA). Note: The 3.7% stop often provides protection when the initial buy occurs below the 50-day SMA. However, if QQQ is already trading above its 50-day SMA at the time of the SPX signal (indicating relative strength), historically, it has been better to use the 50-day SMA rule to give the position more room to run. Trend Exit (Profit-Taking): To stay in a strong trend for the optimal amount of time, the long position is exited when a moving average crossover to the downside is triggered, based around the 107-day Simple Moving Average (SMA).
กลยุทธ์ Pine Script®
โดย market_quester
Smart VWAP FVG SystemSmart VWAP FVG System - Professional Multi-Filter Trading Indicator 📊 OVERVIEW The Smart VWAP FVG System is an advanced multi-layered trading indicator that combines institutional volume analysis, multi-timeframe VWAP trend confirmation, and Fair Value Gap detection to identify high-probability trade entries. This indicator uses a sophisticated filtering mechanism where signals appear only when multiple independent confirmation criteria align simultaneously. Recommended Timeframe: 5-minute (M5) or higher. The indicator works best on M5, M15, and M30 charts for intraday trading. 🎯 ORIGINALITY & PURPOSE This indicator is original because it combines three distinct analytical methods into a unified decision-making system: Market Profile Volume Analysis - Identifies institutional accumulation/distribution zones Dual VWAP Filtering - Confirms trend direction using two independent VWAP calculations Fair Value Gap Detection - Validates institutional interest through price inefficiency zones The key innovation is the directional filter system: the primary Market Profile generates BUY-ONLY or SELL-ONLY states based on higher timeframe value area reversals, which then controls which signals from the main system are displayed. This creates a multi-timeframe confluence that significantly reduces false signals. Unlike simple indicator mashups, each component serves a specific purpose: Market Profile → Direction bias (trend filter) Primary VWAP (Session) → Short-term trend confirmation Secondary VWAP (Week) → Medium-term trend confirmation FVG Detection → Institutional activity validation 🔧 HOW IT WORKS 1. Primary Market Profile Filter (Higher Timeframe) The indicator calculates Market Profile on a higher timeframe (default: 1 hour) to determine the overall market structure: Value Area High (VAH): Top 70% of volume distribution Value Area Low (VAL): Bottom 70% of volume distribution Point of Control (POC): Price level with highest volume When price reaches VAH and reverses down → SELL-ONLY mode activated When price reaches VAL and reverses up → BUY-ONLY mode activated This higher timeframe filter ensures you're trading in the direction of institutional flow. 2. Dual VWAP System Two independent VWAP calculations provide multi-timeframe trend confirmation: Primary VWAP (Session-based): Resets daily, tracks intraday momentum Secondary VWAP (Week-based): Resets weekly, confirms longer-term trend Filter Logic: BUY signals require: Price > Primary VWAP AND Price > Secondary VWAP SELL signals require: Price < Primary VWAP AND Price < Secondary VWAP This dual confirmation prevents counter-trend trades during ranging conditions. 3. Fair Value Gap (FVG) Detection FVG zones identify price inefficiencies where institutional orders were executed rapidly: Bullish FVG: Gap between candle .high and candle .low (upward imbalance) Bearish FVG: Gap between candle .high and candle .low (downward imbalance) The indicator monitors recent FVG formation (lookback: 50 bars) and requires: Bullish FVG present for BUY signals Bearish FVG present for SELL signals FVG zones are displayed as colored boxes and automatically marked as "mitigated" when price fills the gap. 4. Main Trading Signal Logic The secondary Market Profile (default: 1 hour) generates the actual trading signals: BUY Signal Conditions: Price reaches Value Area Low Reversal pattern confirmed (minimum 1 bar) Price > Primary VWAP Price > Secondary VWAP (if filter enabled) Recent Bullish FVG detected (if filter enabled) Primary MP Filter = BUY-ONLY or NEUTRAL SELL Signal Conditions: Price reaches Value Area High Reversal pattern confirmed (minimum 1 bar) Price < Primary VWAP Price < Secondary VWAP (if filter enabled) Recent Bearish FVG detected (if filter enabled) Primary MP Filter = SELL-ONLY or NEUTRAL All conditions must be TRUE simultaneously for a signal to appear. 📈 VISUAL ELEMENTS On Chart: 🟢 Green Triangle (▲) = BUY Signal 🔴 Red Triangle (▼) = SELL Signal 🟦 Blue horizontal lines = Value Area zones 🟡 Yellow line = Point of Control (POC) 🟩 Green boxes = Bullish FVG zones 🟥 Red boxes = Bearish FVG zones 🔵 Blue line = Primary VWAP (Session) ⚪ White line = Secondary VWAP (Week) Info Panel (Top Right): Real-time status display showing: Filter Direction (BUY ONLY / SELL ONLY / NEUTRAL) Active timeframes for both MP filters FVG filter status and count VWAP positions (ABOVE/BELOW) Signal enablement status Alert status ⚙️ KEY SETTINGS MP/TPO Filter Settings (Primary Indicator) MP Filter Time Frame: 60 minutes (controls directional bias) Filter Value Area %: 70% (standard Market Profile calculation) Filter Alert Distance: 1 bar Filter Min Bars for Reversal: 1 bar Filter Alert Zone Margin: 0.01 (1%) FVG Filter Settings Use FVG Filter: Enabled (toggle on/off) FVG Timeframe: 60 minutes (1 hour) FVG Filter Mode: Both (require bullish FVG for BUY, bearish for SELL) FVG Lookback Period: 50 bars (how far back to search) Show FVG Formation Signals: Optional visual markers Max FVG on Chart: 50 zones Show Mitigated FVG: Display filled gaps Market Profile Settings Higher Time Frame: 60 minutes (for main signals) Percent for Value Area: 70% Show POC Line: Enabled Keep Old MPs: Enabled (maintain historical profiles) Primary VWAP Filter Use Primary VWAP Filter: Enabled Primary VWAP Anchor Period: Session (resets daily) Primary VWAP Source: HLC3 (typical price) Secondary VWAP Filter Use Secondary VWAP Filter: Enabled Secondary VWAP Anchor Period: Week (resets weekly) Secondary VWAP Filter Mode: Both Secondary VWAP Line Color: White Trading Signals Show Trading Signals on Chart: Enabled Show SELL Signals: Enabled Show BUY Signals: Enabled Alert Distance: 1 bar Min Bars for Reversal: 1 bar Alert Zone Margin: 0.01 (1%) Retest Search Period: 20 bars Min Bars Between Retests: 5 bars Show Only Retests: Disabled Alert Settings Enable Trading Notifications: Enabled VAH Reversal Alert: Enabled (SELL signals) VAL Reversal Alert: Enabled (BUY signals) Time Filter Settings Filter Alerts By Time: Optional (exclude specific hours) ⚠️ IMPORTANT WARNINGS & LIMITATIONS 1. Repainting Behavior CRITICAL: This indicator uses lookahead=barmerge.lookahead_on to access higher timeframe data immediately for FVG detection. This is necessary to provide real-time FVG zone visualization but has the following implications: FVG zones may shift slightly until the higher timeframe candle closes FVG detection signals are preliminary until HTF bar confirmation The main trading signals (triangles) appear on confirmed bars and do not repaint Best Practice: Always wait for the current timeframe bar to close before acting on signals. The filter status and FVG zones are informational but may adjust as new data arrives. 2. Minimum Timeframe Do NOT use on timeframes below 5 minutes (M5) Recommended: M5, M15, M30 for intraday trading Higher timeframes (H1, H4) can also be used but will generate fewer signals 3. Multiple Filters Can Block Signals By design, this indicator is conservative. When all filters are enabled: Signals appear ONLY when all conditions align You may see extended periods with no signals This is intentional to reduce false positives If you see no signals: Check the Info Panel to see which filters are failing Consider adjusting FVG lookback period Temporarily disable FVG filter to test Verify VWAP filters match current market trend 4. Market Profile Limitations Market Profile requires sufficient volume data Low-volume instruments may produce unreliable profiles Value Areas update only on higher timeframe bar close Works best on liquid markets (major forex pairs, indices, crypto) 📖 HOW TO USE Step 1: Add to Chart Apply indicator to M5 or higher timeframe chart Ensure chart shows volume data Use standard candles (NOT Heikin Ashi, Renko, etc.) Step 2: Configure Settings Primary MP Filter TF: Set to 60 (1 hour) minimum, or 240 (4 hour) for swing trading Main MP TF: Set to 60 (1 hour) for intraday signals FVG Timeframe: Match or exceed main MP timeframe Leave other settings at default initially Step 3: Understand the Info Panel Monitor the top-right panel: FILTER STATUS: Shows current directional bias NEUTRAL = Both signals allowed BUY ONLY = Only green triangles will appear SELL ONLY = Only red triangles will appear FVG Filter: Shows if bullish/bearish gaps detected recently VWAP positions: Confirms trend alignment Step 4: Take Signals For BUY Signal (Green Triangle ▲): Wait for green triangle to appear Check Info Panel shows ✓ for BUY signals Confirm current bar has closed Enter long position Stop loss: Below recent VAL or swing low Target: Previous Value Area High or 1.5-2× risk For SELL Signal (Red Triangle ▼): Wait for red triangle to appear Check Info Panel shows ✓ for SELL signals Confirm current bar has closed Enter short position Stop loss: Above recent VAH or swing high Target: Previous Value Area Low or 1.5-2× risk Step 5: Risk Management Risk per trade: Maximum 1-2% of account equity Position sizing: Adjust based on stop loss distance Avoid trading: During major news events or time filter periods Multiple confirmations: Look for confluence with price action (support/resistance, trendlines) 🎓 UNDERLYING CONCEPTS Market Profile Theory Developed by J. Peter Steidlmayer in the 1980s, Market Profile organizes price and volume data to identify: Value Areas: Where 70% of trading activity occurred POC: Price level with highest acceptance (most volume) Imbalances: When price moves away from value quickly This indicator uses TPO (Time Price Opportunity) calculation method to build the volume profile distribution. VWAP (Volume Weighted Average Price) VWAP represents the average price weighted by volume, showing where institutional traders are positioned: Price above VWAP = Bullish (institutions accumulated lower) Price below VWAP = Bearish (institutions distributed higher) Using dual VWAP (Session + Week) creates multi-timeframe trend alignment. Fair Value Gaps (FVG) Also known as "imbalance" or "inefficiency," FVG occurs when: Price moves so rapidly that a gap forms in the candlestick structure Indicates institutional order flow (large market orders) Price often returns to "fill" these gaps (rebalance) The 3-candle FVG pattern (gap between candle and candle ) is widely used in ICT (Inner Circle Trader) methodology and Smart Money Concepts. 🔍 CREDITS & CODE ATTRIBUTION This indicator builds upon established technical analysis concepts and combines multiple methodologies: 1. Market Profile / TPO Calculation Concept Origin: J. Peter Steidlmayer (Chicago Board of Trade, 1980s) Code Inspiration: TradingView's public domain Market Profile examples Modifications: Custom filtering logic for directional bias, dual timeframe implementation 2. VWAP Calculation Concept Origin: Standard financial instrument (widely used since 1980s) Code Base: TradingView built-in ta.vwap() function (public domain) Modifications: Dual VWAP system with independent anchor periods, custom filtering modes 3. Fair Value Gap Detection Concept Origin: Inner Circle Trader (ICT) / Smart Money Concepts methodology Code Implementation: Original implementation based on 3-candle gap pattern Features: Multi-timeframe detection, automatic mitigation tracking, visual zone display 4. Pine Script Framework Language: Pine Script v6 (TradingView) Built-in Functions Used: ta.vwap() - Volume weighted average price request.security() - Higher timeframe data access ta.change() - Period detection ta.cum() - Cumulative volume time() - Timestamp functions Note: All code is original implementation. While concepts are based on established trading methodologies, the combination, filtering logic, and execution are unique to this indicator. 📊 RECOMMENDED INSTRUMENTS Best Performance: Major Forex Pairs (EURUSD, GBPUSD, USDJPY) Stock Indices (ES, NQ, SPX, DAX) Major Cryptocurrencies (BTCUSD, ETHUSD) Liquid Stocks (high daily volume) Avoid: Low-volume altcoins Illiquid stocks Exotic forex pairs with wide spreads ⚡ PERFORMANCE TIPS Start Conservative: Enable all filters initially Reduce Filters Gradually: If too few signals, disable Secondary VWAP filter first Match Timeframes: Keep MP Filter TF and FVG TF at same value Backtest First: Review historical performance on your preferred instrument/timeframe Combine with Price Action: Look for support/resistance confluence Use Time Filter: Avoid low-liquidity hours (optional setting) 🚫 WHAT THIS INDICATOR DOES NOT DO Does not guarantee profits - No trading system is 100% accurate Does not predict the future - Based on historical patterns Does not replace risk management - Always use stop losses Does not work on all instruments - Requires volume data and liquidity Does not provide exact entry/exit prices - Signals are zones, not precise levels Does not account for fundamentals - Purely technical analysis 📜 DISCLAIMER This indicator is provided for educational and informational purposes only. It is not financial advice, and past performance does not guarantee future results. Trading Risk Warning: All trading involves risk of loss You can lose more than your initial investment (leverage products) Only trade with capital you can afford to lose Always use appropriate position sizing and risk management Consider seeking advice from a licensed financial advisor Technical Limitations: Indicator may repaint FVG zones until HTF bar closes Signals are based on historical patterns that may not repeat Market conditions change and no system works in all environments Volume data quality varies by exchange/broker By using this indicator, you acknowledge these risks and agree that the author bears no responsibility for trading losses. 📞 SUPPORT & UPDATES Questions? Comment on this publication Issues? Describe the problem with chart screenshot Feature Requests? Suggest improvements in comments Updates: Will be published as new versions using TradingView's update feature 📝 VERSION HISTORY Version 1.0 (Current) Initial public release Multi-filter system: MP + Dual VWAP + FVG Directional bias filter Real-time info panel Comprehensive alert system Time-based filtering Thank you for using Smart VWAP FVG System! Happy Trading! 📈
อินดิเคเตอร์ Pine Script®
โดย Smart-Day-Trader
Daily MA — Higher-Timeframe Daily Moving Average OverlayThis indicator plots a clean, higher-timeframe daily moving average directly on any chart, so you can always see where price sits relative to the daily trend — even while trading on lower timeframes (1m, 5m, etc.). It’s designed to be: Simple – a single, configurable daily MA line Consistent – always anchored to the 1D timeframe Flexible – choose EMA or SMA and customize line width/color ⸻ What This Indicator Does Pulls the 1-Day (1D) moving average of the current symbol, regardless of your chart timeframe. Lets you choose between EMA (Exponential Moving Average) or SMA (Simple Moving Average). Plots that daily MA as a smooth overlay on your current chart. Keeps the line visually clean and continuous, making it easy to see daily trend and dynamic support/resistance. This is not a signals/strategy script. It doesn’t generate buy/sell arrows or backtest logic. It’s a context tool for visualizing the daily trend while you execute your own strategy. ⸻ Why a Daily MA Overlay Is Useful Traders commonly use a daily moving average to: Anchor intraday trades to the higher-timeframe trend Longs when price is holding above the Daily MA Shorts or caution when price is rejecting from the Daily MA Identify dynamic support/resistance Price often reacts around well-watched daily MAs (e.g., 50, 100, 200) Filter setups Only take long setups when price is above the daily trend line Avoid counter-trend trades when price is extended far from the Daily MA Because this script forces the MA to always be computed on 1D, you don’t have to switch back and forth between intraday and daily charts to keep track of the bigger picture. ⸻ Inputs & Settings MA Length Default: 200 Any positive integer (min 1) Common examples: 50, 100, 200 for trend structure MA Type EMA – reacts faster to recent price (default) SMA – smoother, slower, more “classic” feel Line Width Default: 2 Range: 1 to 10 Increase if you want the Daily MA to stand out clearly against other indicators Color Default: Purple tone Fully customizable – pick any color that works with your chart theme ⸻ How to Use It in Your Workflow Intraday traders (scalpers/day-traders): Apply the indicator to your 1m/5m/15m charts. Use the Daily MA as a trend filter : Only look for long scalps when price is above the Daily MA. Be more cautious with longs or consider shorts when price is below it. Swing traders : Use it on 1H/4H charts to see where price sits relative to a longer-term daily trend. Watch for: Pullbacks to the Daily MA in an uptrend as potential demand zones. Rejections at the Daily MA in a downtrend as potential supply zones. Risk management & context : Avoid chasing extended moves far from the Daily MA. Mark confluence with other tools (support/resistance, volume profile, etc.) around the Daily MA. ⸻ Notes & Limitations The moving average itself is calculated from daily candles , then displayed on your current timeframe. This is a visual aid only . It does not guarantee future performance or provide financial advice. Always combine this indicator with your own analysis, risk management, and trading plan. ⸻ Disclaimer : This script is provided for educational and informational purposes only. It is not financial advice and does not constitute a recommendation to buy or sell any financial instrument. Always do your own research and trade at your own risk.
อินดิเคเตอร์ Pine Script®
โดย zazenio
Dual DWMA🔹 Dual DWMA Indicator - حلقه اولی‌ها This indicator displays two Double-Weighted Moving Averages (DWMA) with customizable settings: ✅ Fast Line (DWMA 1): Default 50 periods ✅ Slow Line (DWMA 2): Default 200 periods ✅ Dynamic color highlighting based on trend direction ✅ Cross signals for bullish/bearish crossovers ✅ Fully customizable colors and line widths ✅ Alert conditions for automated notifications 📊 Usage: - Use fast line for short-term trends - Use slow line for long-term trends - Watch for crossovers as potential entry/exit signals 🎯 Exclusive for Halghe Avaliha Group 📧 Contact: majid.tafahomi@gmail.com --- 🔹 اندیکاتور دوگانه DWMA - حلقه اولی‌ها این اندیکاتور دو میانگین متحرک وزن‌دار دوگانه (DWMA) را با تنظیمات قابل تغییر نمایش می‌دهد: ✅ خط سریع: پیش‌فرض 50 دوره ✅ خط کند: پیش‌فرض 200 دوره ✅ رنگ‌بندی پویا بر اساس جهت روند ✅ سیگنال‌های تقاطع صعودی/نزولی ✅ رنگ‌ها و ضخامت خطوط قابل تنظیم ✅ هشدارهای خودکار 📊 نحوه استفاده: - از خط سریع برای روندهای کوتاه‌مدت - از خط کند برای روندهای بلندمدت - تقاطع خطوط = سیگنال ورود/خروج احتمالی 🎯 اختصاصی برای گروه حلقه اولی‌ها
อินดิเคเตอร์ Pine Script®
โดย majid_tafahomi