เริ่มกันเลย

อินดิเคเตอร์และกลยุทธ์

DZDZ – Pivot Demand Zones + Trend Filter + Breadth Override + SL is a structured accumulation indicator built to identify high-probability demand areas after valid pullbacks. The script creates **Demand Zones (DZ)** by pairing **pivot troughs (local lows)** with later **pivot peaks (local highs)**, requiring a minimum **ATR (Average True Range)** gap to confirm real price displacement. Zones are drawn only when market structure confirms strength through a **trend filter** (a required number of higher highs over a recent window) or a **breadth override**, which activates after unusually large expansion candles measured as a percentage move from the prior close. In addition to pivots, the script detects **coiling price action**—tight trading ranges contained within an ATR band—and treats these as alternative demand bases. Entries require price to penetrate a defined depth into the zone, preventing shallow reactions. After the first valid entry, a **DCA (Dollar-Cost Averaging)** system adds buys every 10 bars while trend or breadth conditions persist. A **ratcheting SL (Stop-Loss)** tightens upward only, using demand structure or ATR when zones are unavailable. The focus is disciplined, volatility-aware accumulation aligned with structure.
อินดิเคเตอร์ Pine Script®
โดย Gechwindigkeitsbegrendsung
MP SESSIONS, DST, OTTMP SESSIONS, DST, OTT – What this indicator does This script is a multi-session market timing tool that: Draws full trading sessions on the chart (Asia, Sydney, Tokyo, Shanghai, Europe, London, New York, NYSE) Automatically adjusts for Daylight Saving Time (DST) for Sydney, London, and New York Shows a live info table with session times, DST status, and whether each session is currently open or closed Adds optional custom “OTT” vertical lines at user-defined intraday times (for your own models, killzones, or time blocks) Main Features (high level) 1. Market mode & time zone handling Market Mode: Forex Stock User Custom (you type your own session ranges) TFlab suggestion (predefined “optimized” session times) Time Zone Mode: UTC Session Local Time (local exchange time: Sydney, Tokyo, London, New York etc.) Your Time Zone (converts to the user-selected TZ, e.g. UTC-4:00) Handles separate time zones for: Asia, Sydney, Tokyo, Shanghai, Europe, London, New York, NYSE Has logic to recalculate session start/end depending on DST and the chosen mode. 2. Daylight Saving Time (DST) engine The function DST_Detector: Calculates when DST starts and ends for: Australia/Sydney Europe/London America/New_York Detects the correct Sunday (2nd, 4th, etc.) for start/end using day-of-week and week counts. Returns 'Active' or 'Inactive' for each region. These values are then used to shift the sessions (e.g. New York 13:00–21:00 vs 12:00–20:00 in UTC). The script can also draw vertical lines on the chart when DST starts/ends and label them: “Sydney DST Started / Ended” “London DST Started / Ended” “New York DST Started / Ended” 3. Session timing & sessions on the chart The function Market_TimeZone_Calculator: Based on Market Mode + Time Zone Mode + DST state, it returns: Time ranges for: Sydney, Tokyo, Shanghai, Asia (combined), Europe, London, New York, NYSE These ranges are in "HHMM-HHMM" format. Then the script: Converts these to time() conditions using the proper time zone Creates boolean series like On_sesAsia, On_sesEurope, On_sesNewYork, etc., which are 1 when the session is open and 0 when closed. 4. Session high/low boxes & labels The function LowHighSessionDetector: Tracks high and low of each session while it’s active. When a new session starts: Resets and starts recording the session high/low. While session is active: Updates High with the max of current bar high and previous session high. Updates Low with the min of current bar low and previous session low. When the session is "on": Draws a box from session low to high (box.new) and extends it to the right as long as the session continues. Places a label with session name (Asia, London, New York, etc.) near the high: Style depends on the session (down/right/left). You have visibility toggles per session: Asia Session, Sydney Session, Tokyo Session, Shanghai Session, Europe Session, London Session, New York Session, NYSE (for TFlab mode). So you visually see: A shaded box for each session The full H/L range for that session A text label with the session name. 5. Info table The indicator builds a table in a corner of the chart showing: Header: “FOREX Session”, “Stock Market Trading Hours”, “User Custom Session”, or “TFlab suggestion” depending on mode. Columns: Session name (Asia, Sydney, Tokyo, Shanghai, Europe, London, New York, NYSE) DST status for that region (“Active 🌞 / Inactive 🍂 / Not Observed”) Session start time Session end time Current status (“Open / Closed”, with green/red background) The function SplitFunction: Parses the "HHMM-HHMM" strings for each session. Converts them into: Either raw times (if viewing in UTC/session local) Or converted times in Your Time Zone using timestamp and hour/ minute with YourTZ. Returns formatted Start and End strings like 9:30, 13:00, etc. So the table is effectively a live session schedule that: Auto-adjusts to DST Can show times in your own time zone Shows which session is open right now. 6. OTT vertical lines (custom intraday markers) At the bottom, there is an OTT section which lets you draw up to three sets of vertical lines at specific times: Each OTT block has: Enable toggle (Enable OTT 1/2/3) Start hour & minute End hour & minute Color Global OTT settings: Line style: Solid / Dashed / Dotted Line width Toggle: “Show OTT Labels?” Logic: is_ott_time() checks if current bar’s hour and minute match the OTT input time. draw_ott(): When the bar time matches, draws a vertical line through the candle from low to high (extend.both). Optionally adds a label above the bar, like "OTT1 Start", "OTT1 End", etc. Use cases: Marking open/close of your trading session Defining killzones, news times, or custom model windows Visual anchors for your intraday routine (NY open, 10 AM candle, etc.)
อินดิเคเตอร์ Pine Script®
โดย markoparkhomenko
Confluence Levels + Vol Triangles + No-Trade GrayWhen two levels cross: Premarket High (PMH), Premarket Low (PML), Yesterday High (YH), Yesterday Low (YL), Opening Range High (ORH), Opening Range Low (ORL),VWAP, you get a confluence trigger (line cross) that is green for a bull signal and red for a bear signal. Orange line cross signals confluence, but it is unclear what direction. Additional confluence is signaled by a triangle once volume
อินดิเคเตอร์ Pine Script®
โดย alexcausey9
Liquidity Sweep Reentry ToolkitHere’s a clear breakdown of what your Liquidity Sweep Reentry Toolkit script does, and how you can use it on your charts: 🔎 Script Breakdown 1. Visual Controls (Inputs) • : Master toggle to turn all visuals on/off. • : Show labels when a liquidity sweep + ChoCh condition occurs. • : Plot green/red triangles for bullish/bearish reentry signals. • : Prevent multiple signals within the same swing. • : Show HH/HL/LL/LH market structure letters. • : Slider to adjust how dim the background of HH/HL/LL/LH labels appear. 2. Core Conditions • Defines simple bullish () and bearish () candles. • is a placeholder for your Change of Character logic. 3. Sweep Detection • : Detects when price makes a new high compared to the last 5 bars. • : Detects when price makes a new low compared to the last 5 bars. 4. Restriction Flags • Tracks whether a sweep signal has already triggered in the current swing. • Resets when sweeps end, so new signals can appear. 5. Composite Triggers • : Fires when bullish candle + buy-side sweep + ChoCh condition align. • : Fires when bearish candle + sell-side sweep + ChoCh condition align. 6. Visual Labels • Gold labels mark “BS Sweep + ChoCh” or “SS Sweep + ChoCh” events. • Green triangle below bar = bullish reentry. • Red triangle above bar = bearish reentry. • Blue HH/HL/LL/LH labels narrate market structure pivots, with adjustable transparency. 7. Alerts • Alerts can be set for bullish or bearish sweep reentry triggers, so you get notified when conditions align. 📘 How to Use It 1. Apply to Chart Add the script to your TradingView chart (works best on intraday timeframes like 5‑minute). 2. Configure Visuals • Use the Visual Controls panel to toggle features on/off. • Adjust the Label Transparency slider to dim or brighten the HH/HL/LL/LH labels. 3. Interpret Signals • Gold labels show when a sweep + ChoCh condition occurs. • Triangles mark potential reentry points (green = bullish, red = bearish). • HH/HL/LL/LH labels narrate market structure shifts for clarity. 4. Set Alerts • Use the built‑in alert conditions to get notified when bullish or bearish sweep reentry triggers fire. 👉 In short: this toolkit helps you spot liquidity sweeps, confirm with ChoCh, and visualize reentry signals, while also narrating market structure pivots. It’s modular, so you can toggle features depending on how much visual clutter you want. 🛠 Workflow Example 1. Setup • Apply the script to your chart (e.g., 5‑minute S&P futures). • In the indicator settings, decide which visuals you want: • Turn on Sweep + ChoCh labels if you want to see gold tags narrating liquidity events. • Keep Entry triangles on to highlight actionable reentry points. • Adjust the Label Transparency slider so HH/HL/LL/LH structure labels are dim enough not to clutter. 2. Watch for Sweeps • As price pushes above recent highs → a Buy‑side Sweep is detected. • As price dips below recent lows → a Sell‑side Sweep is detected. • If ChoCh logic is true at the same time, you’ll see a gold label (“BS Sweep + ChoCh” or “SS Sweep + ChoCh”). 3. Confirm Reentry • If conditions align (bullish candle + buy‑side sweep + ChoCh), you’ll see a green triangle below the bar. • If bearish candle + sell‑side sweep + ChoCh, you’ll see a red triangle above the bar. • These triangles are your potential reentry triggers. 4. Narrate Market Structure • HH/HL/LL/LH labels appear at pivots, giving you a running commentary of structure shifts. • Example: HH → HL → HH shows bullish continuation; LH → LL → LH shows bearish pressure. • Use the transparency slider to keep these labels subtle but visible. 5. Alerts • Set alerts for “Bullish Sweep Reentry” or “Bearish Sweep Reentry” so you don’t miss signals even if you’re away from the screen. 📘 How to Use in Practice • Intraday trading: On a 5‑minute chart, use the toolkit to spot liquidity grabs and confirm reentry points. • Narration: The HH/HL/LL/LH labels help you keep track of structure without manually marking pivots. • Decision making: Gold labels + triangles = potential trade setups. Structure labels = context for trend bias. • Customization: Dim labels when you want a cleaner chart, brighten them when you’re focused on structure. 👉 In short: this script gives you a modular toolkit — sweeps, ChoCh confirmation, reentry signals, and structure narration — all adjustable so you can tailor the visuals to your workflow. 📈 Bullish Scenario Walkthrough 1. Market Context • You’re watching the 5‑minute chart. • Price has been consolidating near recent highs, building liquidity above. 2. Liquidity Sweep • Price spikes above the prior swing high → the script detects a buy‑side sweep. • A gold label appears: “BS Sweep + ChoCh” (if your ChoCh condition is true). 3. Change of Character (ChoCh) • The candle closes bullish (). • Your ChoCh condition confirms a structural shift. • Together, sweep + ChoCh = potential reentry setup. 4. Reentry Trigger • The script plots a green triangle below the bar. • This marks a bullish sweep reentry signal: price grabbed liquidity and is now showing strength. 5. Market Structure Narration • At the same time, the HH/HL labels update: • The sweep bar prints a new HH. • The next pivot low prints an HL. • This narrates bullish continuation: HH → HL → HH. 6. Trade Decision • You can use the green triangle as your entry cue. • The HH/HL narration gives you confidence that structure supports the trade. • Alerts can be set so you don’t miss the trigger. 7. Risk Management • Stop placement: below the HL pivot or sweep low. • Target: next liquidity pool above, or measured move. 🧭 How to Use This in Practice • Gold label = liquidity event + ChoCh confirmation. • Green triangle = actionable bullish reentry trigger. • HH/HL narration = context for trend bias and trade management. • Transparency slider = keep structure labels subtle so the chart stays clean. 📉 Bearish Scenario Walkthrough 1. Market Context • You’re watching the 5‑minute chart. • Price has been consolidating near recent lows, building liquidity underneath. 2. Liquidity Sweep • Price spikes below the prior swing low → the script detects a sell‑side sweep. • A gold label appears: “SS Sweep + ChoCh” (if your ChoCh condition is true). 3. Change of Character (ChoCh) • The candle closes bearish (). • Your ChoCh condition confirms a structural shift. • Together, sweep + ChoCh = potential bearish reentry setup. 4. Reentry Trigger • The script plots a red triangle above the bar. • This marks a bearish sweep reentry signal: price grabbed liquidity below and is now showing weakness. 5. Market Structure Narration • At the same time, the LH/LL labels update: • The sweep bar prints a new LL. • The next pivot high prints a LH. • This narrates bearish continuation: LH → LL → LH. 6. Trade Decision • You can use the red triangle as your entry cue. • The LH/LL narration gives you confidence that structure supports the short. • Alerts can be set so you don’t miss the trigger. 7. Risk Management • Stop placement: above the LH pivot or sweep high. • Target: next liquidity pool below, or measured move. 🧭 How to Use This in Practice • Gold label = liquidity event + ChoCh confirmation. • Red triangle = actionable bearish reentry trigger. • LH/LL narration = context for trend bias and trade management. • Transparency slider = keep structure labels subtle so the chart stays clean.
อินดิเคเตอร์ Pine Script®
โดย dscottmuller
BTC - ALSI: Altcoin Season Index (Dynamic Eras)Title: BTC - ALSI: Altcoin Season Index (Dynamic Eras) Overview & Philosophy The Altcoin Season Index (ALSI) is a quantitative tool designed to answer the most critical question in crypto capital rotation: "Is it time to hold Bitcoin, or is it time to take risks on Altcoins?" Most "Altseason" indicators suffer from Survivor Bias or Obsolescence. They either track a static list of coins that includes "dead" assets from previous cycles (ghosts of 2017), or they break completely when major tokens collapse (like LUNA or FTT). This indicator solves this by using a Time-Varying Basket. The indicator automatically adjusts its reference list of Top 20 coins based on historical eras. This ensures the index tracks the winners of the moment—capturing the DeFi summer of 2020, the NFT craze of 2021, and the AI/Meme narratives of 2024/2025. Methodology The indicator calculates the percentage of the Top 20 Altcoins that are outperforming Bitcoin over a rolling window (Default: 90 Days). The "Win" Count: For every major Altcoin performing better than BTC, the index adds a point. Dynamic Eras: The basket of coins changes depending on the date: 2020 Era (DeFi Summer): Tracks the "Blue Chips" of the DeFi revolution like UNI, LINK, DOT, and early movers like VET and FIL. 2021 Era (Layer 1 Wars): Tracks the explosion of alternative smart contract platforms, adding winners like SOL, AVAX, MATIC, and ALGO. 2022 Era (The Survivors): Filters for resilience during the Bear Market, solidifying the status of established assets like SHIB and ATOM. 2023 Era (Infrastructure & Scale): Captures the rise of "Next-Gen" tech leading into the pre-halving year, introducing TON, APT (Aptos), and ARB (Arbitrum). 2024/25 Era (AI & Speed): Tracks the current Super-Cycle leaders, focusing on the AI narrative (TAO, RNDR), High-Performance L1s (SUI), and modern Memes (PEPE). Chart Analysis & Strategy ( The "Alpha" ) As seen in the chart above, there is a strong correlation between ALSI Peaks and local tops in TOTAL3 (The Crypto Market Cap excluding BTC & ETH). The Entry (Rotation): When the indicator rises above the neutral 50 line, it signals that capital is beginning to rotate out of Bitcoin and into Altcoins. This has historically been a strong confirmation signal to increase exposure to high-beta assets. The Exit (Saturation): When the indicator hits 100 (or sustains in the Red Zone > 75), it means every single Altcoin is beating Bitcoin. Historically, this extreme exuberance often marks a local top in the TOTAL3 chart. This is the zone where smart money typically sells into strength, rather than opening new positions. How to Read the Visuals 🚀 Altcoin Season (Red Zone > 75): Strong Altcoin dominance. The market is "Risk On." 🛡️ Bitcoin Season (Blue Zone < 25): Bitcoin dominance. Alts are bleeding against BTC. Historically, this is a defensive zone to hold BTC or Stablecoins. Data Dashboard: A status table in the bottom-right corner displays the live Index Value, current Regime, and a System Check to ensure all 20 data feeds are active. Settings Lookback Period: Default 90 Days. Lowering this (e.g., to 30) makes the index faster but noisier. Thresholds: Adjustable zones for Altcoin Season (Default: 75) and Bitcoin Season (Default: 25). Credits & Attribution This open-source indicator is built on the shoulders of giants. I acknowledge the original creators of the concept and the pioneers of its implementation on TradingView: Original Concept: BlockchainCenter.net. - They established the industry standard definition: 75% of the Top 50 coins outperforming Bitcoin over 90 days = Altseason.. TradingView Implementation: Adam_Nguyen - He implemented the "Dynamic Era" logic (updating the coin list annually) on TradingView. Our code structure for the time-based switching is inspired by his methodology. See also his implementation in the chart. ( Altcoin Season Index - Adam) . Comparison: Why use ALSI | RM? While inspired by the above, ALSI introduces three key improvements: Open Source: Unlike other popular TradingView versions (which are closed-source), this script is fully transparent. You can see exactly which coins are triggering the signal. Sanitized History (Anti-Fragile): Historical Top 20 snapshots are not blindly used. "Dead" coins (like LUNA and FTT) from previous eras are manually filtered out. A raw index would crash during the Terra/FTX collapses, giving a false "Bitcoin Season" signal purely due to bad actors. The curated list preserves the integrity of the market structure signal. Narrative Relevance: The 2024/25 basket was updated to include TAO (Bittensor) and RNDR, ensuring the index captures the dominant AI narrative, rather than tracking fading assets from the previous cycle. You can compare the ALSI indicator with other available tradingview indicators in the chart: Different indicators for the same idea are shown in the 3 Pane window below the BTC and Total3 chart, whereas ALSI is the top pane indicator. Important Note on Coin Selection Baskets are highly curated: Dead/irrelevant coins (FTT, LUNA, BSV) are excluded for clean signals. This prevents historical breaks and ensures Era T5 captures current narratives (AI, Memes) via TAO/RNDR. See above. Users are free to adjust the source code to test their own baskets. Disclaimer This script is for research and educational purposes only. Past correlations between ALSI and TOTAL3 do not guarantee future results. Market regimes can change, and "Altseasons" can be cut short by macro events. Tags bitcoin, btc, altseason, dominance, total3, rotation, cycle, index, alsi, Rob Maths
อินดิเคเตอร์ Pine Script®
โดย Rob_Maths
"Clean Market Structure & Trend Confirmation" TP LADDER(UPDATED)Clean Market Structure & Trend Confirmation — TP Ladder This indicator is designed to identify high-probability intraday trend trades using market structure, momentum confirmation, and a visual ribbon system, with automatic take-profit and stop-loss levels plotted after confirmed signals. WHAT THIS INDICATOR IS FOR This script is built for active intraday traders trading SPY, QQQ, It focuses on trend continuation and directional momentum rather than scalping chop. It works best during regular market hours with extended hours enabled. HOW TO LOAD (IMPORTANT) Add the script to your chart Set chart timeframe to 5-minute Turn Extended Trading Hours ON Use during the NY session (especially open and trend periods) THE RIBBON (MOST IMPORTANT RULE) The ribbon defines the trend. • Blue/Teal ribbon = bullish trend • Red ribbon = bearish trend • Gray ribbon = compression / no trade zone Only trade in the direction of the ribbon. No ribbon alignment = no trade. BULL & BEAR DOTS “BULL” dot appears when structure flips bullish. “BEAR” dot appears when structure flips bearish. These confirm trend direction, not entries by themselves. BUY & SELL ARROWS (ENTRIES) • BUY arrow prints only when bullish ribbon, structure, momentum, and filters align • SELL arrow prints only when bearish ribbon, structure, momentum, and filters align • Arrows are non-repainting when using close-confirmed mode No arrow = no trade. CONTINUATION (C) LOGIC The script allows limited continuation entries after pullbacks when structure realigns. By default, only one continuation per direction per day is allowed to prevent overtrading and signal spam. TAKE-PROFIT (TP) LADDER When a BUY or SELL arrow confirms, the script automatically plots: • TP1 = partial profit • TP2 = extended target • TP3 = final extension • STOP = ATR-based stop loss All levels are calculated using ATR and adjust automatically to volatility. The ladder only appears after a confirmed signal. HOW TO TRADE IT (SIMPLE FLOW) Identify ribbon direction Wait for BUY or SELL arrow Enter on confirmation Scale out at TP1, TP2, TP3 Respect the STOP line If structure breaks or ribbon flips, exit. WHAT TO AVOID • Do not trade against the ribbon • Do not trade in gray ribbon conditions • Do not chase candles without arrows • Do not expect constant signals (quality over quantity)
อินดิเคเตอร์ Pine Script®
โดย webemoon
Liquidity Levels Pro Tool - thewallranka Liquidity Levels Pro Tool is a market-structure and liquidity-mapping indicator designed to help discretionary futures and index traders identify statistically relevant price levels where reactions, continuations, or liquidity sweeps are more likely to occur. This script is a decision-support tool, not a signal generator. It does not issue buy/sell alerts or predict future price movement. Instead, it organizes and scores liquidity information so traders can make their own contextual decisions. What this indicator does The script continuously detects and maintains liquidity zones derived from price pivots, then evaluates those zones using multiple structural and contextual factors: Repeated price interaction (touches) Freshness (time since last interaction) Confluence with key reference levels Reaction behavior after contact Session relevance (RTH vs overnight) Market regime (trend vs mean reversion) Time-of-day effects (open, midday, power hour) Only the most relevant zones—based on a dynamic scoring system—are displayed to reduce chart clutter and focus attention on levels that have historically mattered. Core components 1. Liquidity Zones Zones are built from pivot highs and lows and expanded into areas using a configurable tick-based padding. Nearby zones are merged to avoid redundancy. Each zone is continuously evaluated and assigned a score (0–100) reflecting its relative importance. 2. Zone Scoring (No Lookahead) Zone scores are based on: Number of confirmed interactions Recency of the last touch Confluence with prior day/week levels, VWAP, and Opening Range Reaction quality after touches (speed and follow-through) Session alignment (zones that “work” in the current session are favored) Penalties after liquidity sweeps Zones are not forward-looking and do not rely on future data. 3. Context Engine The script classifies the current environment using VWAP slope and distance: Trend (up or down) Mean reversion Mixed/transition Time-of-day context (Open, Midday, Power Hour) is also tracked internally and influences zone scoring. This context is displayed in the HUD to support situational awareness, not automated decisions. 4. Liquidity Sweeps Optional sweep detection highlights situations where price trades beyond a zone and closes back inside, indicating potential stop runs or failed breakouts. Sweeps are rate-limited and applied conservatively to avoid visual noise. 5. Trade Planning Levels (Optional) When enabled, the script highlights the nearest high-quality liquidity level above and below price based on score thresholds. These are intended as reference targets, not trade entries or exits. HUD (Heads-Up Display) The on-chart HUD summarizes: Key reference levels (prior day/week, Opening Range) Nearest strong liquidity above/below price Market regime and time-of-day context Distance to levels (ticks or points) The HUD is fully optional, positionable, and includes resizable modes (Small / Medium / Large) to fit different chart layouts. How to use this tool This indicator is best used as part of a discretionary trading process, for example: Identifying areas where price is more likely to react or pause Framing trades around higher-quality structure instead of arbitrary levels Filtering setups based on session and regime context Managing expectations near known liquidity rather than chasing price It is intentionally designed not to provide trade signals. Limitations and important notes This script does not predict outcomes or guarantee reactions High-scoring zones can still fail Liquidity behavior is context-dependent and probabilistic No performance claims or backtested results are provided The indicator should not be used in isolation Past behavior does not imply future results. Chart and usage notes The script is intended for standard time-based charts Recommended for liquid futures and index products Use a clean chart for clarity when publishing or sharing No external indicators are required Final note Liquidity Levels Pro (Tool) — v6 is designed to organize complex market structure into a clear, readable framework, allowing traders to focus on execution and risk management rather than raw level detection. This script reflects an analytical approach to intraday liquidity and structure, not an automated trading system.
อินดิเคเตอร์ Pine Script®
โดย thewallranka
Heikin Ashi + Real Price OverlayHeikin-Ashi + Real Price Overlay This indicator combines the smooth trend visualization of Heikin-Ashi candles with the true market price for precise execution. Features: Heikin-Ashi Candles: Provides a clear, smoothed view of market trends and momentum. Real Close Price Overlay: Plots the actual closing price as a line on top of HA candles, ensuring accurate entry, exit, and stop placement. Trend-Based Coloring: The real price line is colored according to HA trend (green for bullish, red for bearish), making trend bias instantly visible. Lightweight and ideal for scalping, day trading, or any strategy where trend bias + exact price matters. Use Case: Use HA candles to identify market bias and momentum. Use the real price line for precise entries, exits, and stop levels. Perfect for traders who want the clarity of HA without sacrificing real price accuracy.
อินดิเคเตอร์ Pine Script®
โดย seeyeahslater
VEGA (Velocity of Efficient Gain Adaptation)VEGA (Velocity of Efficient Gain Adaptation) VEGA is a momentum oscillator that measures the velocity of an efficiency-weighted adaptive moving average. Unlike traditional momentum indicators that react uniformly to all price movements, VEGA intelligently adapts its sensitivity based on market conditions—responding quickly during trending periods and filtering noise during consolidation. -------------------------------- What Makes VEGA Different Efficiency-Driven Adaptation At its core, VEGA uses the Efficiency Ratio (ER) to distinguish between trending and choppy markets. When price moves efficiently in one direction, VEGA's underlying adaptive MA speeds up to capture the move. When price chops sideways, it slows down to avoid whipsaws. This creates a momentum reading that's inherently cleaner than fixed-period alternatives. Linear Regression Smoothed Source VEGA offers an optional LinReg-smoothed price source that blends regular candles with linear regression values. This pre-smoothing reduces noise before it ever enters the calculation, resulting in a histogram that's easier to read without sacrificing responsiveness. The mix ratio lets you dial in exactly how much smoothing you want. Z-Score Normalization with Dead Zone Rather than arbitrary oscillator bounds, VEGA normalizes output as standard deviations from the mean. This gives statistically meaningful levels: readings above +2σ or below -2σ represent genuinely extreme momentum. The configurable dead zone (with Snap, Soft Fade, or None modes) filters out insignificant movements near zero, keeping you focused on signals that matter. -------------------------------- How It Works 1. Source Preparation — Price is smoothed via a LinReg/regular candle blend 2. Efficiency Ratio — Measures directional movement vs total movement over the lookback period 3. Adaptive MA — Applies variable smoothing based on efficiency (fast during trends, slow during chop) 4. Velocity — Calculates the rate of change of the adaptive MA 5. Normalization — Converts to Z-Score (standard deviations) or ATR-normalized percentage 6. Dead Zone — Optionally filters near-zero values to reduce noise -------------------------------- How To Read VEGA Signal and Interpretation Histogram above zero | Bullish momentum Histogram below zero | Bearish momentum Bright color | Momentum accelerating Faded color | Momentum decelerating Beyond ±1σ bands | Above-average momentum Beyond ±2σ bands | Extreme momentum (potential reversal zone) Zero line cross*| Momentum shift -------------------------------- Key Settings ER Length — Lookback for efficiency ratio calculation. Higher = smoother, slower adaptation. Fast/Slow Smoothing — Controls the adaptive MA's responsiveness range. The MA blends between these based on efficiency. LinReg Settings — Enable smoothed candles and adjust the blend ratio (0 = regular candles, 1 = full LinReg, 0.5 = 50/50 mix). Z-Score Lookback — Period for calculating mean and standard deviation. Shorter = more reactive normalization. Dead Zone Type — How to handle near-zero values: Snap — Hard cutoff to zero Soft Fade — Gradual reduction toward zero None — No filtering Dead Zone Threshold — Values within this Z-Score range are affected by the dead zone setting. VEGA works on any timeframe and any market. For best results, adjust the ER Length and LinReg settings to match your trading style and the volatility characteristics of your instrument.
อินดิเคเตอร์ Pine Script®
โดย B3AR_Trades
Harmonic Patterns (Experimental) [Kodexius]Harmonic Patterns (Experimental) is a multi pattern harmonic geometry scanner that automatically detects, validates, and draws classic harmonic structures directly on your chart. The script continuously builds a pivot map (swing highs and swing lows), then evaluates the most recent pivot sequence against a library of harmonic ratio templates such as Gartley, Bat, Deep Bat, Butterfly, Crab, Deep Crab, Cypher, Shark, Alt Shark, 5-0, AB=CD, and 3 Drives. Unlike simple “pattern exists / pattern doesn’t exist” indicators, this version scores candidates by accuracy . Each pattern includes “ideal” ratio targets, and the script computes a total error score by measuring how far the observed ratios deviate from the ideal. When multiple patterns could match the same pivot structure, the script selects the best match (lowest total error) and displays that one. This reduces clutter and makes the output more practical in real market conditions where many ratio ranges overlap. The end result is a clean, information rich visualization of harmonic opportunities that is: -Pivot based and swing aware -Ratio validated with configurable tolerance -Direction filtered (bullish, bearish, or both) -Ranked by accuracy to prefer higher quality matches Note: This is an experimental pattern engine intended for research, confluence and chart study. Harmonic patterns are probabilistic and can fail often. Always combine with your own risk management and confirmation tools. 🔹 Features 🔸Pivot Detection The script uses pivot functions to detect structural turning points: -Pivot Left Bars controls how many bars must exist on the left of the pivot -Pivot Right Bars controls confirmation delay on the right (smaller value reacts faster) Additionally, a Min Swing Distance (%) filter can ignore tiny swings to reduce noise. Pivots are stored separately for highs and lows and capped by Max Pivots to Store to keep the script efficient. 🔸Pattern Library (XABCD and Beyond) Supported structures include: -Gartley, Bat, Deep Bat, Butterfly, Crab, Deep Crab -Cypher (uses XC extension and CD retracement logic) -Shark and Alt Shark (0-X-A-B-C mapping) -5-0 (AB and BC extensions with CD retracement) -AB=CD (symmetry and proportionality checks) -3 Drives (6 point structure, drive and retracement ratios) Each pattern is defined by ratio ranges and also “ideal” ratio targets used for scoring. 🔸 Pattern Fibonacci Rules (Detailed Ratio Definitions) This script validates each harmonic template by measuring a small set of Fibonacci relationships between the legs of the pattern. All measurements are computed using absolute price distance (so the ratios are direction independent), and then a directional sanity check ensures the geometry is positioned correctly for bullish or bearish cases. How ratios are measured Most patterns in this script use the standard X A B C D harmonic structure. Four ratios are evaluated: 1) XB retracement of XA This measures how much price retraces from A back toward X when forming point B . xbRatio = |B - A| / |A - X| 2) AC retracement of AB This measures how much point C retraces the AB leg. acRatio = |C - B| / |B - A| 3) BD extension of BC This measures the “drive” from C into D relative to the BC leg. bdRatio = |D - C| / |C - B| 4) XD retracement of XA This is the most important “completion” ratio in many patterns. It measures where D lands relative to the original XA swing. xdRatio = |D - A| / |A - X| Important: the script applies a user defined Fibonacci Tolerance to each accepted range, meaning the pattern can still pass even if ratios are slightly off from the textbook values. 🔸 XABCD Pattern Ratio Templates Below are the exact ratio rules used by the templates in this script. Gartley -XB must be ~0.618 of XA -AC must be between 0.382 and 0.886 of AB -BD must be between 1.272 and 1.618 extension of BC -XD must be ~0.786 of XA In practice, Gartley is a “non extension” structure, meaning D usually remains inside the X boundary . Bat -XB between 0.382 and 0.50 of XA -AC between 0.382 and 0.886 of AB -BD between 1.618 and 2.618 of BC -XD ~0.886 of XA Bat patterns typically complete deeper than Gartley and often create a sharper reaction at D. Deep Bat -XB ~0.886 of XA -AC between 0.382 and 0.886 of AB -BD between 1.618 and 2.618 of BC -XD ~0.886 of XA Deep Bat uses the same completion zone as Bat, but requires a much deeper B point. Butterfly -XB ~0.786 of XA -AC between 0.382 and 0.886 of AB -BD between 1.618 and 2.618 of BC -XD between 1.272 and 1.618 of XA Butterfly is an extension pattern . That means D is expected to break beyond X (in the completion direction). Crab -XB between 0.382 and 0.618 of XA -AC between 0.382 and 0.886 of AB -BD between 2.24 and 3.618 of BC -XD ~1.618 of XA Crab is also an extension pattern . It often produces a very deep D completion and a strong reaction zone. Deep Crab -XB ~0.886 of XA -AC between 0.382 and 0.886 of AB -BD between 2.0 and 3.618 of BC -XD ~1.618 of XA Deep Crab combines a deep B point with a strong XA extension completion. 🔸 Cypher Fibonacci Rules (XC Based) Cypher is not validated with the same four ratios as XABCD patterns. Instead it uses an XC based completion model: 1) B as a retracement of XA xb = |B - A| / |A - X| // AB/XA Must be between 0.382 and 0.618 . 2) C as an extension from X relative to XA xc = |C - X| / |A - X| // XC/XA Must be between 1.272 and 1.414 . 3) D as a retracement of XC xd = |D - C| / |C - X| // CD/XC Must be ~ 0.786 . This makes Cypher structurally different: the “completion” is defined as a retracement of the entire XC leg, not XA. 🔸 Shark and Alt Shark Fibonacci Rules (0-X-A-B-C Mapping) Shark patterns are commonly defined as 0 X A B C . In this script the pivots are mapped like this: 0 = pX, X = pA, A = pB, B = pC, C = pD So the final pivot (stored as pD) is labeled as C on the chart. Three ratios are validated: 1) AB relative to XA ab_xa = |B - A| / |A - X| Must be between 1.13 and 1.618 . 2) BC relative to AB bc_ab = |C - B| / |B - A| Must be between 1.618 and 2.24 . 3) OC relative to OX oc_ox = |C - 0| / |X - 0| For Shark it must be between 0.886 and 1.13 . For Alt Shark it must be between 1.13 and 1.618 (a deeper / more extended completion). 🔸 5-0 Fibonacci Rules 5-0 is validated as a sequence of extensions and then a fixed retracement: 1) AB extension of XA ab_xa = |B - A| / |A - X| Must be between 1.13 and 1.618 . 2) BC extension of AB bc_ab = |C - B| / |B - A| Must be between 1.618 and 2.24 . 3) CD retracement of BC cd_bc = |D - C| / |C - B| Must be approximately 0.50 . Note that for 5-0 the script does not rely on an XA completion ratio like 0.786 or 1.618. The defining completion is the 0.5 retracement of BC. 🔸 AB=CD Fibonacci Rules AB=CD is a symmetry pattern and is treated differently from the harmonic templates: 1) AB and CD length symmetry The script checks if CD is approximately equal to AB within tolerance. 2) BC proportion BC/AB is expected to fall in a common Fibonacci retracement zone: -approximately 0.618 to 0.786 (with a looser tolerance in code) 3) CD/BC expansion CD/BC is expected to be an expansion ratio: -approximately 1.272 to 1.618 (also with a looser tolerance) This allows the script to capture both classic equal leg AB=CD and common “expanded” variations. 🔸 3 Drives Fibonacci Rules (6 Point Structure) 3 Drives is a 6 point structure and is validated using retracement ratios and extension ratios: Retracement rules Retracement 1 must be between 0.618 and 0.786 of Drive 1 Retracement 2 must be between 0.618 and 0.786 of Drive 2 Extension rules Drive 2 must be between 1.272 and 1.618 of Retracement 1 Drive 3 must be between 1.272 and 1.618 of Retracement 2 This pattern is meant to capture rhythm and proportional repetition rather than a single XA completion ratio. 🔸 Why the script can show “ratio labels” on legs If you enable Show Fibonacci Values on Legs , the script prints the measured ratios near the midpoint of each leg (or diagonal, depending on pattern type). This makes it easy to visually confirm: -Which ratios caused the pattern to pass -How close the structure is to ideal harmonic values -Why one template was preferred over another via the accuracy score 🔸 Fibonacci Tolerance Control All ratio checks use a single tolerance input (percentage). This tolerance expands or contracts the acceptable ratio ranges, letting you decide whether you want: -Tight, high precision matches (lower tolerance) -Broader, more frequent matches (higher tolerance) 🔸 Direction Filter (Bullish Only / Bearish Only / Both) You can restrict scanning to bullish patterns, bearish patterns, or allow both. This is useful if you are aligning with higher timeframe bias or only trading one side of the market. 🔸 Best Match Selection (Anti Clutter Logic) When a new pivot confirms, the script evaluates all enabled patterns against the latest pivot sequence and keeps the one with the smallest total error score. This is especially helpful because many harmonic templates overlap in real time. Instead of drawing multiple conflicting labels, you get one “most accurate” candidate. 🔸 Clean Visual Rendering and Optional Details The drawing system can display: -Main structure lines (X-A-B-C-D or special mappings) -Dashed diagonals for geometric context (XB, AC, BD, XD) -Pattern fill to visually highlight the structure zone -Point labels (X,A,B,C,D or 0..5 for 3 Drives, 0-X-A-B-C for Shark) -Leg Fibonacci labels placed around midpoints for fast ratio reading All colors (bullish and bearish line and fill) are configurable. 🔸 Pattern Spacing and Display Limits To keep charts readable, the script includes: -Max Patterns to Display to limit on-chart drawings -Min Bars Between Patterns to avoid repeated signals too close together in the same direction Older patterns are automatically deleted once the display limit is exceeded. 🔸 Alerts When enabled, alerts trigger on new confirmed detections: -Bullish Pattern Detected -Bearish Pattern Detected Alerts fire once per bar when a new pattern is confirmed by a fresh pivot. 🔹 Calculations This section summarizes the core logic used under the hood. 1) Pivot Detection and Swing Filtering The script confirms pivots using right side confirmation, then optionally filters them by minimum swing distance relative to the last opposite pivot. // Pivot detection float pHigh = ta.pivothigh(high, pivotLeftBars, pivotRightBars) float pLow = ta.pivotlow(low, pivotLeftBars, pivotRightBars) // Example swing distance filter (conceptual) abs(newPivot - lastOppPivot) / lastOppPivot >= minSwingPercent Pivots are stored in capped arrays (high pivots and low pivots), ensuring performance and stable memory usage. 2) Ratio Measurements (Retracement and Extension) The engine measures harmonic ratios using two core helpers: Retracement measures how much the third point retraces the previous leg. Extension measures how much the next leg extends relative to the previous leg. // Retracement: (p3 - p2) compared to (p2 - p1) calcRetracement(p1, p2, p3) => float leg = math.abs(p2.price - p1.price) float retr = math.abs(p3.price - p2.price) leg != 0 ? retr / leg : na // Extension: (p4 - p3) compared to (p3 - p2) calcExtension(p2, p3, p4) => float leg = math.abs(p3.price - p2.price) float ext = math.abs(p4.price - p3.price) leg != 0 ? ext / leg : na For a standard XABCD pattern the script evaluates: -XB retracement of XA -AC retracement of AB -BD extension of BC -XD retracement of XA 3) Tolerance Based Range Check Ratio validation uses a flexible range check that expands min and max by the tolerance percent: isInRange(value, minVal, maxVal, tolerance) => float tolMin = minVal * (1.0 - tolerance) float tolMax = maxVal * (1.0 + tolerance) value >= tolMin and value <= tolMax This means even “fixed” ratios (like 0.786) still allow a user controlled deviation. 4) Positional Sanity Check for D (Beyond X or Not) Some harmonic patterns require D to remain within X (non extension patterns), while others require D to break beyond X (extension patterns). The script enforces that using a boolean flag in each template. Conceptually: -If the pattern is an extension type, D should cross beyond X in the expected direction -If the pattern is not extension type, D should stay on the correct side of X This prevents visually incorrect “ratio matches” that violate the intended geometry. 5) Template Definitions (Ranges + Ideal Targets) Every pattern includes ratio ranges plus ideal values. The ideal values are used only for scoring quality, not for pass/fail. Example concept: -Ranges determine validity -Ideal targets determine ranking 6) Accuracy Scoring (Total Error) When a candidate passes all validity checks, the script computes an accuracy score by summing absolute deviations from ideal ratios: calcError(value, ideal) => math.abs(value - ideal) // Total error is the sum of the four leg errors (as available for the pattern) totalError = calcError(xbRatio, xbIdeal) + calcError(acRatio, acIdeal) + calcError(bdRatio, bdIdeal) + calcError(xdRatio, xdIdeal) Lower score means closer to the “textbook” harmonic proportions. 7) Best Match Resolution (Choosing One Winner) When multiple enabled patterns match the same pivot structure, the script selects the one with the lowest totalError: updateBest(currentBest, newCandidate) => result = currentBest if not na(newCandidate) if na(currentBest) or newCandidate.totalError < currentBest.totalError result := newCandidate result This is a major practical feature because it reduces clutter and highlights the highest quality interpretation. 8) Bullish and Bearish Scanning Logic The scanner runs when pivots confirm: -Bullish patterns are evaluated on a newly confirmed pivot low (potential D) -Bearish patterns are evaluated on a newly confirmed pivot high (potential D) From that D pivot, the script searches backward through stored pivots to build a valid pivot sequence (X,A,B,C,D). If 3 Drives is enabled, it also attempts to find the extra preceding point needed for the 6 point structure. 9) Rendering: Lines, Fill, Labels, and Leg Fib Text After detection the script draws: -Primary legs with thicker lines -Geometric diagonals with dashed lines (for XABCD types) -Optional fill between selected legs to emphasize the structure area -A summary label showing direction, pattern name, and ratios -Optional point labels and leg ratio labels placed near midpoints To avoid overlapping with candles, the script offsets labels using ATR: float yOff = math.max(ta.atr(14) * 0.15, syminfo.mintick * 10) 10) Pattern Lifecycle and Cleanup To respect chart limits and keep visuals clean, the script deletes old drawings once the maximum visible patterns threshold is exceeded. This includes lines, fills, and labels.
อินดิเคเตอร์ Pine Script®
โดย Kodexius
Anchored Cumulative AverageAnchored Cumulative Price Average Overview The Anchored Cumulative Price Average plots the arithmetic mean of price values calculated from a user-defined start date and time. Instead of using a fixed lookback length, the average continuously incorporates every completed candle since the anchor point, producing a stable reference level that evolves as new data becomes available. The indicator supports custom source selection, optional higher-timeframe calculation, and an optional High / Low average mode, making it suitable for contextual market analysis across multiple time horizons. How It Works • A start date and time define the anchor point. • From that moment forward, the script accumulates price values and divides them by the total number of candles included. • The result is a cumulative (since-anchor) average, not a rolling moving average. • When a higher timeframe is selected, calculations are performed only when a new HTF candle completes, ensuring consistent aggregation. This approach creates an average that reflects the market’s mean price relative to a specific event, session, or structural point. Inputs • Calculation Timeframe Choose the timeframe used for the calculation. Leaving this empty uses the chart timeframe. • Start Date / Time Defines the anchor point from which the average begins. Source Select the price input used for the average: • Close, Open, High, Low • HL2, HLC3, OHLC4 • High & Low (plots separate averages for highs and lows) How to Use • Anchor the indicator to a session open, swing point, news event, or structural shift. • Observe how price interacts with the cumulative average as more data is added. • Use the High & Low mode to visualize mean price boundaries instead of a single central line. • Apply a higher timeframe to view broader contextual averages while remaining on a lower-timeframe chart. Common Use Cases • Contextual reference for mean price since a specific date or event • Market structure and balance analysis • Session-based or event-anchored price evaluation • Multi-timeframe alignment and bias assessment • Visual support tool alongside discretionary analysis Notes • This indicator does not predict price or generate trade signals. • It is designed as a contextual analysis tool and should be used in conjunction with other forms of market analysis. • The plotted values will change as new candles form after the anchor point.
อินดิเคเตอร์ Pine Script®
โดย The_Forex_Steward
Kinetic RSI [Vel + Accel] + AlertsThe Problem with Standard RSI Most traders use the Relative Strength Index (RSI) to see if a market is "Overbought" (above 70) or "Oversold" (below 30). The problem? A strong trend can stay overbought for days, burning short sellers, or an asset can stay oversold while price continues to crash. Standard RSI tells you where the price is, but it doesn't tell you how hard it is moving. ​The Solution: Kinetic RSI This script reimagines RSI by applying basic physics concepts: Velocity and Acceleration. Instead of asking "Is RSI below 30?", this indicator asks: "Is RSI below 35 AND did it just make a violent, high-speed turn upwards?" ​It filters out lazy, drifting price action and only signals when momentum is accelerating in a new direction. ​How It Works (The Math) ​Velocity: We calculate the speed of the RSI change (Current RSI - Previous RSI). ​Acceleration: We calculate if that speed is increasing (Current Velocity - Previous Velocity). ​The Trigger: A signal is only generated if the RSI is in an extreme zone (<35 or >65) AND it has high Velocity AND positive Acceleration. ​How to Trade It ​1. The "Kick" Signals (Background Highlights) ​🟢 Green Background (Bullish Kick): The RSI was low, but buyers stepped in aggressively. The momentum is not just positive; it is accelerating upward. This is often a "V-Bottom" catch. ​🔴 Red Background (Bearish Kick): The RSI was high, but sellers slammed the price down. Momentum is accelerating downward. ​2. The Line Color ​Lime Line: Velocity is positive (Momentum is rising). ​Fuchsia Line: Velocity is negative (Momentum is falling). ​Usage: If the background flashes Green (Buy Signal), but the line turns back to Fuchsia (Red) a few bars later, the move has failed—exit the trade. ​Settings & Alerts ​RSI Length: Standard 14 (Adjustable). ​Velocity Threshold: Controls sensitivity. ​Lower (e.g., 2-3): More signals, catches smaller reversals. ​Higher (e.g., 5+): Fewer signals, catches only massive "shocks" to the price. ​Alerts Included: You can set alerts for "Bullish Kick," "Bearish Kick," or "Any Kick" to get notified of volatility spikes. ​Best Practices ​Wait for the Close: This indicator measures the closing velocity. Always wait for the bar to close to confirm the background color signal. ​Trend Filtering: This works best as a "Reversal" indicator. If the market is in a super-strong uptrend, ignore the Bearish (Red) signals and only take the Bullish (Green) dips.
อินดิเคเตอร์ Pine Script®
โดย MonkeyPhone
COIN-Clean Market Structure & Trend Confirmation TP(Updated)COIN-Clean Market Structure & Trend Confirmation TP(Updated) — COIN (Simple Trend + Buy/Sell Confirmation + Take-Profit Targets) This indicator is designed to help you trade COIN by clearly showing trend direction, confirmation signals, and predefined take-profit levels. It removes guesswork and helps you stay on the right side of the move. HOW TO LOAD Add the indicator to a COIN chart. Turn on Extended Hours for best results. The default settings are already optimized and do not need to be changed. THE RIBBON (WHAT TO TRADE) The ribbon shows the overall trend. Teal ribbon = price is trending up (look for BUY setups). Red ribbon = price is trending down (look for SELL setups). Gray ribbon = no clear trend (do not trade). If the ribbon is gray, the indicator will block signals to protect you from choppy markets. BULL AND BEAR DOTS (TREND CHANGE ALERTS) Bull dot appears when the trend turns bullish. Bear dot appears when the trend turns bearish. These dots are early warnings, not entries. Always wait for a BUY or SELL arrow before taking a trade. BUY AND SELL ARROWS (WHEN TO ENTER) BUY arrows appear only when conditions strongly favor upward movement. SELL arrows appear only when conditions strongly favor downward movement. These arrows are confirmation signals. Enter only after the arrow appears. Not every move will get a signal. Fewer, higher-quality signals are intentional. OPENING BIAS (FIRST MINUTES PROTECTION) Right after the market opens, the indicator sets a directional bias. During this time, it will only allow trades in the safer direction. This helps avoid getting chopped up during the opening volatility. TAKE-PROFIT TARGETS AND STOP When a BUY or SELL arrow appears, take-profit levels automatically show on the chart: TP1, TP2, and TP3 are profit targets. STOP is where the trade is considered wrong. You can scale out at each target or exit fully at any level. Only the most recent targets are shown to keep the chart clean. SIMPLE WAY TO USE IT Check the ribbon color (teal or red). Ignore the chart if the ribbon is gray. Wait for a BUY or SELL arrow. Use the take-profit targets and stop provided. Do not chase moves without arrows. IMPORTANT NOTES This indicator does not repaint confirmed signals. It is meant to keep trading simple and disciplined. It works best during strong trend days, not sideways markets.
อินดิเคเตอร์ Pine Script®
โดย webemoon
Selected Days Indicator V3-TrDoes the stock drop every Wednesday? Do March months always move similarly? Does the 1st week of the month behave differently? Do you ever say "it always makes this move in these months"? Don't you want to see more clearly whether it actually makes this move or not? Don't you want to see and test periodically repeating price patterns? Hisse her Çarşamba düşüyor mu? Mart ayları hep benzer mi hareket ediyor? Ayın 1. haftası farklı mı davranıyor? Bazen "bu aylarda hep bu hareketi yapıyor" dediğiniz oluyor mu? Gerçekten de bu hareketi yapıp yapmadığını daha net görmek istemez misiniz? Periyodik tekrarlayan fiyat kalıplarını görmek ve test etmek istemiyor musunuz? 1. Problem Some stocks or crypto assets exhibit systematic behaviors on certain days, weeks, or months. But it's hard to see - everything is mixed together on the chart. This indicator isolates the days/weeks/months you want and shows only them. Hides everything else. 2. How It Works Three-layer filter: Day (Monday, Tuesday...), Week (1st, 2nd, 3rd week of the month), Month (January, February...). Select what you want, let the rest disappear. Example: Show only Thursdays of March-June-September. Or compare every 1st week of the month. View as candlestick, line, or column chart. 3. What's It Good For? Test "end-of-month effect". Find "day-of-the-week anomaly". Analyze crypto volatility by days. See seasonality in commodities. Discover patterns specific to your own strategy. Past data doesn't guarantee the future but provides statistical advantage.
อินดิเคเตอร์ Pine Script®
โดย ExperiMentalist
BTC - Bitcoin Strategic Dashboard by RM Title: BTC - Bitcoin Strategic Dashboard | RM Overview & Philosophy The Bitcoin Strategic Dashboard is a comprehensive analytics tool designed to provide deeper market context beyond simple price action. While a standard chart displays price history, this dashboard focuses on the structural health of the market. It aims to answer clearer questions: Is the asset statistically overextended? Is the current volatility compressed or expanding? How is Bitcoin currently correlating with traditional equity markets? This script aggregates key data points—Performance, Risk, Valuation, and Macro Correlations—into a single, organized table. It is designed to be a quiet, high-density reference tool that sits unobtrusively in the corner of your screen, helping to contextualize daily price movements without cluttering your workspace. Methodology & Module Breakdown The dashboard is divided into 5 strategic modules. Here is exactly how to read them, how they are calculated, and how to interpret the data. 1. PERFORMANCE This section answers: "Is Bitcoin actually beating the traditional market, and by how much?" BTC Return : The raw percentage growth of Bitcoin. Timeframes: 1-Year (Tactical Trend) and 4-Year (The Halving Cycle). Alpha (vs SPX / Gold): Meaning : "Alpha" measures true outperformance. It tells you how much better your capital worked in Bitcoin compared to the S&P 500 (Stocks) or Gold. Calculation : We use a Relative Growth Ratio. Instead of simple subtraction, we calculate the growth factor of BTC divided by the growth factor of the Benchmark. Interpretation : Green: Bitcoin is outperforming. It is the superior vehicle for capital. Red: Bitcoin is underperforming traditional assets (Opportunity Cost is high). 2. RISK PROFILE This section answers: "How dangerous is the market right now?" Drawdown (DD): Meaning : The percentage loss from the 1-Year High. Interpretation : Deep Drawdowns (e.g., > -50%) historically signal generational buying opportunities (Deep Red). Small Drawdowns (< -5%) signal we are near "Discovery Mode" (Blue/Green). Sharpe Ratio: Meaning : The industry standard for "Risk-Adjusted Return." It asks: "Is the profit worth the stress?" Timeframe : Annualized over 365 Days. Interpretation : > 1.0: Good. The return justifies the risk. > 2.0: Excellent. (Dark Green). < 0.0: Bad. You are taking risk for negative returns. Sortino Ratio: Meaning : Similar to Sharpe, but it only counts downside volatility as "risk." Bitcoin often rallies aggressively (Good Volatility); Sortino ignores the upside "risk" and focuses only on minimizing losses. Volatility (Vol) & Rank: Meaning : How violently the price is moving. Calculation : We compare the current 30-Day Volatility against the last 4 Years of volatility history (Rank 0-100). Interpretation (The Squeeze Strategy) : BLUE (Cold / <25%): Volatility is historically low. The market is "compressed." Big moves often follow these periods. RED (Hot / >75%): Volatility is extreme. High risk of mean reversion or panic. 3. VALUATION & MOMENTUM This section answers: "Is Bitcoin cheap or expensive?" Mayer Multiple (MM): Meaning: A "Godfather" of Bitcoin ratios. Calculation : Current Price divided by the 200-Day Moving Average. Interpretation : < 0.8 (Blue): Historically "Cheap." 1.0: Fair Value (Price = Trend). > 2.4 (Red): Speculative Bubble territory. RSI (Relative Strength Index): Timeframe : 14 Days. Interpretation : >70 suggests the market is overheated (Red). <30 suggests oversold conditions (Blue). Trend (ADX) : Meaning : The Average Directional Index measures the strength of a trend, not the direction. Interpretation : Values >25 (Green) indicate a strong trend is present. Values <20 (Gray) indicate a choppy/sideways market (no trend). vs 200W (Macro): Meaning : The distance to the 200-Week Moving Average. Interpretation : This line is historically the "Cycle Bottom" or "Absolute Support" for Bitcoin. Being close to it (or below it) is rare and often marks cycle lows. 4. MACRO CORRELATIONS This section answers: "Is Bitcoin moving on its own, or just following the Stock Market?" vs TradFi (SPX): Timeframe : 90-Day Correlation Coefficient. Interpretation : High Positive (Red): BTC is just acting like a tech stock. No "Safe Haven" status. Negative/Zero (Green): BTC is "decoupled." It is moving independently of Wall Street. vs DXY (US Dollar): Interpretation : Bitcoin usually moves inverse to the Dollar. Negative (Green): Normal healthy behavior. Positive (Red): Warning signal. If both DXY and BTC rise, something is breaking in the system. 5. HISTORICAL LEDGER A Year-by-Year breakdown of returns. Feature : You can toggle the comparison column in the settings to compare Bitcoin against either S&P 500 or Gold. Usage : Helps visualize the cyclical nature of returns (e.g., the 4-year cycle pattern of Green-Green-Green-Red). How to Read the Visuals (Heatmap) The dashboard uses a standardized Bloomberg-style heatmap to let you assess the market state in milliseconds: 🟢 Green: Profit / Good Performance / Positive Alpha. 🔴 Red: Loss / Overheating / High Risk. 🔵 Blue: "Cold" / Cheap / Low Volatility (Potential Buy Zones). 🟠 Orange: Warning / High Drawdown. ⚫ Gray/Black: Neutral or Fair Value. Settings & Customization Visuals: Change the text size (Tiny, Small, Normal) to fit your screen resolution. Modules: You can toggle individual sections on/off to save screen space. Calculation: Switch the Historical Benchmark between "S&P 500" and "Gold" depending on your thesis. Disclaimer This script is for research and educational purposes only. The metrics provided (Sharpe, Sortino, Mayer Multiple) are derived from historical data and do not guarantee future performance. "Cheap" (Low Mayer Multiple) does not mean the price cannot go lower. Always manage your own risk. Tags bitcoin, btc, bloomberg, terminal, dashboard, onchain, mayer multiple, sharpe ratio, volatility, alpha, risk management, Rob Maths
อินดิเคเตอร์ Pine Script®
โดย Rob_Maths
X-Trend Macro Command CenterX-Trend Macro Command Center (MCC) | Institutional Grade Dashboard 📝 Description Body The Invisible Engine of the Market Revealed. Traders often focus solely on Price Action, ignoring the massive underwater currents that actually drive trends: Global Liquidity, Inflation, and Central Bank Policy. We created X-Trend Macro Command Center (MCC) to solve this problem. This is not just an indicator. It is a fundamental heads-up display that bridges the gap between technical charts and macroeconomic reality. 💡 The Idea & Philosophy Markets don't move in a vacuum. Bull runs are fueled by M2 Money Supply expansion and negative real yields. Crashes are triggered by liquidity crunches and aggressive rate hikes. X-Trend MCC was built to give retail traders the same "Macro Awareness" that institutional desks possess. It aggregates fragmented economic data from Federal Reserve databases (FRED) directly onto your chart in real-time. 🚀 Application & Logic This tool is designed for Trend Traders, Crypto Investors, and Macro Analysts. Identify the Regime: Instantly see if the environment is "RISK ON" (High Liquidity, Low Real Rates) or "RISK OFF" (Monetary Tightening). Validate the Trend: Don't buy the dip if Liquidity (M2) is crashing. Don't short the rally if Real Yields are negative. Multi-Region Analysis: Switch instantly between economic powerhouses (US, China, Japan) to see where the capital is flowing. 📊 Dashboard Metrics Explained Every row in the Command Center tells a specific story about the economy: Interest Rate: The "Gravity" of finance. Higher rates weigh down risk assets (Stocks/Crypto). Inflation (YoY): The erosion of purchasing power. We calculate this dynamically based on CPI data. Real Yield (The "Golden" Metric): Calculated as Interest Rate - Inflation. Green: Real Yield is low/negative. Cash is trash, assets fly. Red: Real Yield is high. Cash is King, assets struggle. US Debt & GDP: Fiscal health indicators formatted in Trillions ($T). Watch the Debt-to-GDP ratio—if it spikes >120%, expect currency debasement. M2 Money Supply: The fuel tank of the market. Tracks the total amount of money in circulation. ↗ Trend: Liquidity is entering the system (Bullish). ↘ Trend: Liquidity is drying up (Bearish). 🧩 The X-Trend Ecosystem X-Trend MCC is just the tip of the iceberg. This module is part of the larger X-Trend Project — a comprehensive suite of algorithmic tools being developed to quantify market chaos. While our Price Action algorithms (Lite/Pro/Ultra) handle the Micro, the MCC handles the Macro. Technical Note: Data Sources: Direct connection to FRED (Federal Reserve Economic Data). Zero Repainting: Historical data is requested strictly using closed bars to ensure accuracy. Open Source: We believe in transparency. The code is open for study under MPL 2.0. Build by Dev0880 | X-Trend © 2025
อินดิเคเตอร์ Pine Script®
โดย Dev0880
Rainbow MA Width█ OVERVIEW Rainbow MA Width is a companion indicator for Rainbow MA Cloud. It displays ribbon width as a normalized Z-Score, allowing traders to visualize trend momentum expansion and contraction relative to recent history. █ CONCEPTS Z-Score Normalization: Rather than displaying raw width values (which vary by asset and timeframe), this indicator normalizes the ribbon width using Z-Score calculation: Z-Score = (Current Width - Average Width) / Standard Deviation Z-Score Interpretation: • 0 = Average width (mean) • +1 to +2 = Expanding (above average, strong trend) • -1 to -2 = Contracting (below average, weakening trend) • Beyond ±2 = Extreme (statistical outlier, potential reversal) Width Calculation Modes: • Outer — Distance between fastest and slowest MA: |MA1 - MA8| • Average Gap — Mean of all adjacent MA gaps • Total Gap — Sum of all adjacent MA gaps █ FEATURES 1 — Width Mode Selection Three methods to calculate ribbon width. "Outer" recommended for aligned trends. 2 — Z-Score Period Configurable lookback for mean and standard deviation. Default 20 bars; increase for smoother, less reactive readings. 3 — Zone Fill Coloring Cyan fill when expanding (Z > 0). Orange fill when contracting (Z < 0). Yellow fill for extreme values (|Z| > 2) as warning. 4 — Alignment Background Green background during bullish alignment. Red background during bearish alignment. Synced with Rainbow MA Cloud for consistency. 5 — Reference Lines Horizontal lines at 0 (mean), ±1σ, and ±2σ levels. Provides clear visual boundaries for interpretation. 6 — Raw Width Display Optional secondary line showing original width percentage. Useful for comparing normalized vs absolute values. █ HOW TO USE Trend Confirmation: • Z-Score rising above 0 confirms trend acceleration • Z-Score staying above +1 indicates sustained strong momentum • Use alongside alignment background for confluence Reversal Warning: • Z-Score exceeding +2 suggests overextension (yellow warning zone) • Z-Score dropping below -2 indicates extreme contraction • Extreme readings often precede trend reversals or consolidation Entry Timing: • Enter trends when Z-Score crosses above 0 (expansion beginning) • Avoid entries when Z-Score is at extreme highs (potential exhaustion) • Consider exits when Z-Score peaks and begins declining █ LIMITATIONS • Z-Score is relative to lookback period; different periods give different readings • Extreme zones (±2) are statistical guides, not guarantees • Best used in conjunction with Rainbow MA Cloud for full context █ ALERTS Four built-in alert conditions: • Z-Score crosses above/below zero • Z-Score enters extreme high/low zones (±2)
อินดิเคเตอร์ Pine Script®
โดย viva_lee
Rainbow MA Cloud█ OVERVIEW Rainbow MA Cloud displays 8 Moving Averages as a gradient-colored cloud to visualize trend direction and strength. The "rainbow" effect shows momentum through ribbon width, while perfect MA alignment signals strong trending conditions. █ CONCEPTS The indicator uses 8 MAs with Fibonacci-based default lengths (8, 13, 21, 34, 55, 89, 144, 233) to create a layered view of price momentum across multiple timeframes. Perfect Alignment Detection: • Bullish Alignment — All 8 MAs in ascending order (MA1 > MA2 > ... > MA8) Indicates strong uptrend with momentum across all timeframes • Bearish Alignment — All 8 MAs in descending order (MA1 < MA2 < ... < MA8) Indicates strong downtrend with aligned selling pressure • Mixed — MAs are not in sequential order, suggesting consolidation or transition Ribbon Width: • Widening ribbon = Trend acceleration, increasing momentum • Narrowing ribbon = Trend weakening, potential reversal or consolidation █ FEATURES 1 — MA Configuration Choose from EMA, SMA, WMA, VWMA, or HMA calculation methods. All 8 MA lengths are fully customizable. 2 — Color Themes Five built-in themes: Rainbow, Warm, Cool, Neon, Mono. Creates visually distinct gradient from fast to slow MAs. 3 — Alignment Background Green background during bullish alignment. Red background during bearish alignment. Helps quickly identify strong trending periods. 4 — Trend Signals Labels appear when perfect alignment forms. "BULL ALIGN" for bullish, "BEAR ALIGN" for bearish. 5 — Information Panel Real-time display of alignment status, trend strength percentage, ribbon width, price position relative to cloud, and MA values. █ HOW TO USE Entry Signals: • Look for alignment signals (BULL/BEAR ALIGN) as trend confirmation • Enter long when bullish alignment forms with price above cloud • Enter short when bearish alignment forms with price below cloud Trend Following: • Stay in position while alignment background color persists • Widening ribbon confirms trend continuation • Exit or reduce when alignment breaks (background disappears) Support/Resistance: • Cloud edges act as dynamic support (bullish) or resistance (bearish) • Price entering cloud suggests consolidation or potential reversal █ LIMITATIONS • Alignment signals are lagging by nature (based on MA crossovers) • Works best on trending markets; generates mixed signals during ranging periods • Ribbon width measurement uses outer MAs only (MA1 vs MA8) █ COMPANION INDICATOR Use "Rainbow MA Width" indicator for detailed Z-Score analysis of ribbon expansion/contraction patterns.
อินดิเคเตอร์ Pine Script®
โดย viva_lee