เริ่มกันเลย

อินดิเคเตอร์และกลยุทธ์

UK Public OnesideRSI + Stochastic V1 (Moderate) Strategy This strategy combines RSI, Stochastic Oscillator, and a 50 EMA trend filter to identify moderate-risk trading opportunities in trending markets. How it works: Long entries occur when RSI and Stochastic are in oversold conditions while price is above the 50 EMA. Short entries occur when RSI and Stochastic are in overbought conditions while price is below the 50 EMA. Trades are confirmed on the previous candle, avoiding premature entries and exits. Risk management is handled using fixed percentage stop-loss with configurable risk-to-reward targets. Optional RSI-based exits close positions early during overbought or oversold conditions. Key Features: Trend-filtered entries using EMA 50 Non-repainting logic (confirmed candle signals) Configurable stop-loss and reward ratio Works well for scalping and intraday trading Suitable for crypto, forex, and indices Recommended Timeframes: 5m, 15m, 30m Note: This strategy is designed for educational and research purposes. Always forward-test and apply proper risk management before using in live trading.
กลยุทธ์ Pine Script®
โดย ONESIDEZZ
1
TDZZ ETH 15min Vault: No-Loss Martin Gale StrategyStrategy Overview The ETH 15min Vault is an enhanced, high-frequency Martin Gale strategy designed specifically for Ethereum on the 15-minute chart. Its core innovation lies in integrating pre-calculated margin management with a multi-layer exit system, transforming the traditional high-risk Martingale approach into a controlled, calculated growth engine. The strategy aims for sustainable compound growth of small capitals (e.g., 1000U) in ranging markets while systematically eliminating the risk of account blow-up. Core Concept: The "No-Loss" Guarantee Unlike conventional Martingale systems that risk infinite losses, this strategy pre-calculates and logically reserves the total margin required for all potential layers (configurable, e.g., up to 30) at the initial entry. This ensures sufficient capital is always available for the next averaging order, preventing liquidation due to margin shortage. Combined with intelligent, proactive take-profit and safety-net closures, it creates a theoretically "No-Loss" framework for the Martin Gale method. Key Mechanisms 1、Smart Position Averaging: Averaging distances expand geometrically (configurable multiplier), preventing rapid layer depletion during sharp drops. Averaging order size increases progressively (configurable multiplier) to effectively lower the break-even point. 2、Dynamic Multi-Stage Exit Logic: Rebound TP: Partially closes a position when price rebounds a certain percentage from its entry, locking in profits early during oscillations. Cycle TP: Closes the remaining position upon reaching the primary profit target, which is dynamically recalculated after each average to reflect the new aggregate cost. Safety-Net Close (Defense Mode): Activates after a defined number of averages. Triggers a full exit if price: a) rallies significantly from the lowest point, b) retraces from a recent high, or c) fails to make a new low within a set time. This forms the final protective layer for capital preservation. Main Advantages ✅ True Risk Isolation: Transforms Martingale's "unlimited risk" into a "defined and manageable drawdown" via pre-calculated margins and safety-net exits. ✅ Active Profit Capture: The "Rebound TP" mechanism increases win rate and capital efficiency in ranging markets. ✅ Adaptive to Volatility: Adjustable parameters for averaging distance and size allow tuning for different market conditions. ✅ High-Frequency Compounding Potential: Operates on the 15-min timeframe, offering numerous opportunities to complete profit cycles in consolidating phases. Configuration & Parameters Key adjustable inputs include: Initial Capital %, Averaging Distance % and Multiplier, Order Size Multiplier, Max Layers, Take-Profit %, Rebound Close %, and all Defense Mode thresholds. This strategy significantly reduces liquidation risk through its design but does not eliminate trading risk. Substantial drawdowns can occur during strong, sustained trends. "No-Loss" refers to prevention of margin-call liquidation, not guaranteed profitability. Always conduct thorough backtesting and forward testing in a simulated environment before committing real capital. Past performance is not indicative of future results. Trade responsibly.
กลยุทธ์ Pine Script®
โดย AI-996NB
Tailwind.(BTC)Imagine the price of Bitcoin is like a person climbing a staircase. The Steps (Grid): Instead of watching every single price movement, the strategy divides the market into fixed steps. In your configuration, each step measures **3,000 points**. (Examples: 60,000, 63,000, 66,000...). The Signal: We buy only when the price climbs a full step decisively. The "Expensive Price" Filter: If the price jumps the step but lands too far away (the candle closes too high), we do not buy. It is like trying to board a train that has already started moving too fast; the risk is too high. Rigid Exits: The Take Profit (TP) and Stop Loss (SL) are calculated from the edge of the step, not from the specific price where you managed to buy. This preserves the geometric structure of the market. The Code Logic (Step-by-Step) A. The Math of the Grid (`math.floor`) pinescript level_base = math.floor(close / step_size) * step_size This is the most important line. What does it do? It rounds the price down to the nearest multiple of 3,000. Example: If BTC is at 64,500 and the step size is 3,000: 1. Divide: $64,500 / 3,000 = 21.5$ 2. `math.floor` (Floor): Removes the decimals $\rightarrow$ remains $21$. 3. Multiply: $21 * 3,000 = 63,000$. Result: The code knows that the current "floor" is **63,000**, regardless of whether the price is at 63,001 or 65,999. B. The Strict Breakout (`strict_cross`) pinescript strict_cross = (open < level_base) and (close > level_base) Most strategies only check if `close > level`. We do things slightly differently: `open < level_base`: Requires the candle to have "born" *below* the line (e.g., opened at 62,900). `close > level_base`: Requires the candle to have *finished* above the line (e.g., closed at 63,200). Why? This avoids entering on gaps (price jumps where the market opens already very high) and confirms that there was real buying power crossing the line. C. The "Expensive Price" Filter (`max_dist_pct`) pinescript limit_price_entry = level_base + (step_size * (max_dist_pct / 100.0)) price_is_valid = close <= limit_price_entry Here you apply the percentage rule: -If the level is 63,000 and the next is 66,000 (a difference of 3,000). -If `max_dist_pct` is **60%**, the limit is $63,000 + (60\% \text{ of } 3,000) = 64,800$. -If the breakout candle closes at **65,000**, the variable `price_is_valid` will be **false** and it will not enter the trade. This avoids buying at the ceiling. D. TP and SL Calculation (Anchored to the Level) pinescript take_profit = level_base + (step_size * tp_mult) stop_loss = level_base - (step_size * sl_mult) Note that we use `level_base` and not `close`. -If you entered because the price broke 63,000, your SL is calculated starting from 63,000. -If your SL is 1.0x, your stop will be exactly at 60,000. This is crucial: If you bought "expensive" (e.g., at 63,500), your real stop is wider (3,500 points) than if you bought cheap (63,100). Because you filter out expensive entries, you protect your Risk/Reward ratio. E. Visual Management (`var line`) The code uses `var` variables to remember the TP and SL lines and the `line.set_x2` function to stretch them to the right while the operation remains open, providing that visual reference on the chart until the trade ends. Workflow Summary Strategy Parameters: Total Capital: $20,000 We will use 10% of total capital per trade. Commissions: 0.1% per trade. TP: 1.4 SL: 1 Step Size (Grid): 3,000 We use the 200 EMA as a trend filter. Feel free to experiment with the parameters to your liking. Cheers.
กลยุทธ์ Pine Script®
โดย OldWave96
1
Wavelet Candlestick Slope Follower-Master Edition Here is a short description of this script: This is a **Trend Following strategy** that utilizes advanced mathematics—the **Wavelet Transform**—to filter out market noise. **Key Features:** 1. **Synthetic Candles:** The script does not analyze raw prices. Instead, it constructs "Wavelet Candles"—smoothed candles created through mathematical convolution of prices with a specific wavelet "kernel" (e.g., Mexican Hat, Morlet, Haar). 2. **Auto-Correction (Normalization):** This is the most critical technical feature of this code. The script automatically normalizes the weights. This ensures that even when using complex mathematical shapes (like the Mexican Hat), the output price remains accurate to the real chart scale and is not distorted. 3. **Strategy Logic:** The logic is very straightforward—the system enters a **Long** position when the smoothed closing price (`w_close`) is rising, and closes the position when it starts to fall. 4. **Visualization:** It draws new, cleaner candles (green/red) on the chart, revealing the "true" trend structure after filtering out temporary fluctuations. This is a example of use idea of wavelet candle
กลยุทธ์ Pine Script®
โดย wojlucz
Daily Dynamic Grid StrategyHi everyone, This strategy is built around a dynamic daily grid concept, using an upper and lower daily range that is automatically divided into multiple grid levels. The idea is to take advantage of daily volatility by executing DCA entries on specific grid levels, based on predefined conditions. Key points of the strategy & feature: I recommend using 1H or 2H timeframe for this strategy Take profit by grid When DCA is active (>1 entry), the exit condition switches to close above the average price A hard stop loss is applied Includes an optional Trailing TP / SL to help maximize profit during strong moves Like most DCA-based strategies, it tends to have a high win rate, but during strong market dumps, losses can become relatively large Can also be used for backtest on Forex markets such as Gold, where using the trailing option is generally more effective And still trial for the webhook, may continue to improve and update this strategy in future versions.
กลยุทธ์ Pine Script®
โดย begril
Kairos Bands [v1.1]Overview The Kairos Bands Strategy is a highly modular trading system designed to identify high probability entry points based on volatility exhaustion and momentum shifts... It is built with a proprietary core algorithm that detects when price has extended too far from its mean, but it is wrapped in a Confluence Cloud that allows the user to filter these signals through nine different secondary indicators... This is not just a static strategy... It is a framework that allows you to build your own edge by toggling specific filters on and off to match current market conditions... 1... The Chameleon Feature (Trend or Reversal) One of the most powerful features of Kairos Bands is the Inverse Trades logic... Reversal Mode (Default): By default, the strategy looks for price exhaustion... It buys when the market is oversold and sells when the market is overbought... This is ideal for ranging markets or catching tops and bottoms... Trend Following Mode (Inversed): By checking the Inverse Trades box in the settings, the logic flips completely... A Buy signal becomes a Sell and vice versa... This transforms the strategy into a breakout or trend following system, entering trades in the direction of the momentum rather than against it... 2... The Confluence Cloud While the core trigger is based on proprietary volatility calculations, the user has full control over how strictly those trades are filtered... You can toggle any of the following 9 momentum filters independently for both Long and Short setups... RSI (Relative Strength Index) Stochastic Oscillator CCI (Commodity Channel Index) Williams %R MFI (Money Flow Index) CMO (Chande Momentum Oscillator) Fisher Transform Ultimate Oscillator ROC (Rate of Change) For example, you can require RSI and MFI to agree with the main signal for Longs, but only require Stochastic for Shorts... This allows for granular tuning... 3... Trend Bias & Time Management To further refine entries, the strategy includes: EMA Trend Filter: An optional dual EMA system (Fast vs Slow) that forces the strategy to only trade in the direction of the dominant trend... Precision Time Filtering: You can define exact start and end times (down to the minute) for entries... No Trade Zone (NTZ): A specific time window where the strategy is forbidden from holding positions... If a trade is open when the NTZ begins, it is immediately force closed to avoid volatility events or market closes... 4... Risk Management The strategy moves away from vague percentage based stops and uses precision point based targeting... Fixed Points: Set your Take Profit and Stop Loss in exact price points... Signal Skipping: An optional feature to cool down the strategy after a trade closes, forcing it to skip a set number of subsequent signals to avoid over trading... 5... Professional Analytics Dashboard The visual overlay provides a detailed Heads Up Display (HUD) containing institutional grade metrics... Strategy Grade: An automatic A through F grading system based on the Win Rate Differential (how much better the strategy performs compared to a breakeven coin flip)... Streak Analysis: Tracks the maximum and average consecutive wins and losses to help you understand the psychological drawdown risk... Rolling PnL: A secondary dashboard tracks your hypothetical Net PnL over the last 7 trading days and the last 12 months, giving you a clear view of short term and long term performance...
กลยุทธ์ Pine Script®
โดย kingdomcitizendavid
Hybrid Trend-Following Inside Bar BreakoutHybrid Trend-Following Inside Bar Breakout Strategy The Hybrid Trend-Following Inside Bar Breakout Strategy is a rule-based trading system designed to capture strong directional moves while controlling risk during uncertain market conditions. It combines trend-following, price action, and volatility-based risk management into a single robust framework. Core Concept The strategy trades inside bar breakouts only in the direction of the dominant market trend. Inside bars represent periods of consolidation, and when price breaks out of this consolidation in a trending market, it often leads to impulsive moves with favorable risk–reward characteristics. Key Components 1. Trend Filter Uses 50 EMA and 200 EMA to define the market trend. Bullish bias: 50 EMA above 200 EMA Bearish bias: 50 EMA below 200 EMA This filter prevents counter-trend trades and improves trade quality. 2. Volatility Filter Compares fast ATR (14) with slow ATR (50). Trades are taken only when volatility is expanding or above a minimum threshold. This avoids low-volatility, choppy market conditions. 3. Inside Bar Breakout An inside bar forms when the current candle’s high is lower than the previous candle’s high and the low is higher than the previous candle’s low. A trade is triggered only when price breaks above or below the inside bar range in the direction of the trend. 4. Candle Quality Filter Requires a minimum body-to-range ratio, ensuring that the breakout candle has strong momentum and is not driven by weak wicks. Risk Management & Trade Management Stop Loss (SL) Placed using ATR-based dynamic stops, adapting to current market volatility. Prevents tight stops in volatile conditions and wide stops in calm markets. Partial Profit Taking 50% of the position is exited at 1.5R, locking in profits early. This reduces psychological pressure and improves equity stability. Trailing Stop After partial profit is taken, the remaining position is managed with an ATR-based trailing stop. Allows the strategy to capture large trend moves while protecting gains. Cooldown Mechanism After a losing trade, the system enters a cooldown period and skips a fixed number of bars. This helps avoid revenge trading and overtrading during unfavorable market phases. Why This Strategy Works Trades only high-probability breakouts in trending markets Adapts automatically to changing volatility Combines price action precision with systematic risk control Designed for consistent performance over long historical periods
กลยุทธ์ Pine Script®
โดย JeET369
BRT Support MA [STRATEGY] v2BRT Support MA Strategy v2 - Dynamic Support Line Strategy 📊 Strategy Description BRT Support MA Strategy v2 is an automated trading strategy based on the analysis of dynamic support and resistance levels using volatility calculations on higher timeframes. The strategy is designed to identify key trend reversal moments and enter positions with optimal risk-to-reward ratios. 🎯 Key Features Unique strategy characteristics: 1. Multi-Timeframe Volatility Analysis - indicators are calculated on a user-selected timeframe, which allows filtering market noise and obtaining more reliable signals 2. Adaptive Hedging System - a unique algorithm for dynamic position volume calculation during reversals, which accounts for current drawdown and automatically adjusts order size for optimal risk management 3. Visual Trend Indication - dynamic color change of the main line (green = uptrend, red = downtrend) for quick assessment of current market conditions 4. Automatic Signal Markers - the strategy marks trend change moments on the chart with arrows for convenient analysis 5. Limit Orders - entries into positions occur via limit orders at key levels, ensuring better price execution ⚙️ Strategy Settings Support MA Length - calculation period for the main support/resistance line Support MA Timeframe - timeframe for indicator calculations (can be set higher than current for noise filtering) TP (%) - take profit percentage from entry point SL (%) - stop loss percentage from entry point Hedge Multiplier - volume multiplier for hedging positions during reversals 📈 Operating Logic The strategy analyzes the relationship between two dynamic levels calculated based on market volatility. When price breaks through the main support level in the direction of the trend: Long positions are opened when the main indicator is in an uptrend and price breaks above it Short positions are opened when the main indicator is in a downtrend and price breaks below it When there is an open position and an opposite signal forms, the strategy automatically calculates the optimal volume for a hedging position based on the percentage price movement and the set take profit. 🎨 Visual Elements Blue/Green/Red line - main dynamic support/resistance level (color changes depending on current trend) Green arrows down ▼ - uptrend reversal signals Red arrows up ▲ - downtrend reversal signals TP and SL - displayed in data window for current open position 💡 Usage Recommendations Test the strategy on historical data of different instruments before use Optimize parameters for the specific trading instrument and timeframe Configure TP/SL parameters according to your trading system and risk tolerance Hedge Multiplier controls hedging system aggressiveness - start with conservative values ⚠️ DISCLAIMER IMPORTANT! PLEASE READ BEFORE USE: This script is provided for educational and research purposes only . It is intended for testing on historical data and studying algorithmic trading approaches. The author is NOT responsible for: Any financial losses incurred as a result of using this strategy Trading results in real-time or on demo accounts Losses arising from incorrect parameter configuration Technical failures, slippage, and other market conditions Trading involves a high level of risk and is not suitable for all investors. You can lose all of your invested capital. Do not invest money you cannot afford to lose. Before starting real trading: Conduct thorough testing on historical data Ensure you fully understand the strategy's operating logic Consult with a financial advisor Consider broker commissions and slippage Start with minimum volumes Past performance does not guarantee future profitability. Use of the strategy is at your own risk. © MaxBRFZCO | Version 2.0 | Pine Script v5 For questions and suggestions, please use comments under the publication
กลยุทธ์ Pine Script®
โดย MaxBRFZCO
Monthly DI+ & RSI StrategyOverview This strategy is designed to capture significant trend reversals and continuations on the Monthly timeframe. It combines the trend-following capability of the Directional Movement Index (DMI) with the fast momentum detection of RSI (Period 6). Core Logic The strategy triggers a long position based on a dual-confirmation system. It looks for a specific "handshake" between Trend (DI) and Momentum (RSI). Entry Conditions (OR Logic) A Buy signal is generated if EITHER of the following occurs: Trend Trigger: DI+ crosses over DI- (while RSI is already bullish, trading above its SMA). Momentum Trigger: RSI(6) crosses over RSI SMA(14) (while the trend is already bullish, with DI+ > DI-). Exit Condition (Stop Loss) Trend Reversal: The position is closed immediately if DI- crosses over DI+, indicating the bullish trend has been invalidated. Default Settings Timeframe: Optimized for 1M (Monthly) charts. RSI: Length 6 RSI SMA: Length 14 DMI: Length 14 / Smoothing 14 Risk Warning This script is for educational purposes only. Past performance does not guarantee future results. Always backtest on your specific asset classes before trading.
กลยุทธ์ Pine Script®
โดย Ganamurthy
[Backtest Crypto] Cross MAThis script is designed for testing the moving average crossover strategy. Script settings: Select testing range Indicator settings: Select moving average type (EMA, SMA, WMA, SMMA, HMA) and period Trade management: Select risk-to-reward ratio, stop-loss defined as min/max for a certain number of candles (you can set a desired number), option to partially lock in a position by moving the stop-loss to breakeven, trailing stop, or close a position on an opposite signal. Option to limit the stop-loss by ATR to prevent it from becoming too large during volatile movements. =============================================================== Скрипт предназначен для тестирования стратегии пересечение скользящих средних. Настройки скрипта: Выбор диапазона тестирования Настройки индикатора: выбор типа скользящей (EMA, SMA, WMA, SMMA, HMA) и периода Сопровождение сделки: выбор соотношения риска к прибыли, стоп-лосс определяется как мин/мах за определенное количество свечей (можно устанавливать желаемое количество), возможность частичной фиксации позиции с переносом стоп-лосса в безубыток, трейлинг-стоп, или закрытие позиции по противоположному сигналу. Возможность ограничения стоп-лосса по ATR, чтобы при волатильных движениях он не был слишком большим.
กลยุทธ์ Pine Script®
โดย Backtest_Crypto
Daily Open Shift The "Daily Open Shift" System (V2.0) 1. The Setup (Indicators & Timeframe) • Timeframe: 15-Minute Chart (Execution). • Key Levels: Daily Open (DO) or New York Open (NYO). • Trend Indicators: o 24 & 42 EMA Ribbon (Exponential Moving Averages). o 30-Minute Supertrend. ________________________________________ 2. Phase 1: Establish The Bias (The Filter) This is the V2 upgrade. We do not trade against the day's opening momentum. 1. Mark the Open: Draw a horizontal line at the Daily Open (00:00) or Session Open. 2. The "First 2H" Rule: Observe the price action for the first 2 hours after the open. o First 2H are Green/Bullish? → You are LONG BIAS only for the rest of the session. (Ignore all sell signals). o First 2H are Red/Bearish? → You are SHORT BIAS only for the rest of the session. (Ignore all buy signals). ________________________________________ 3. Phase 2: The Signal (The Switch) Wait for the chart to confirm your bias technically. 1. The Switch: Price must cross and close a 15M candle on the correct side of the Daily Open. o Longs: Price switches from below to above DO. o Shorts: Price switches from above to below DO. 2. Indicator Confluence: o EMAs: Must be crossed in your direction (Green for Long, Red for Short). o 30M Supertrend: Must match your direction. ________________________________________ 4. Phase 3: The Entry (The Trigger) We never chase the breakdown. We wait for the price to come to us. 1. The Pullback: Wait for the price to retrace and touch/wick into the 24/42 EMA Ribbon. 2. The Confirmation: Watch the candle that touches the EMA. o It must reject the EMA (wick off it) and close respecting the trend. o Do not enter if the candle closes forcefully through the EMA, breaking structure. 3. Execution: Enter Market Order immediately on that candle close. ________________________________________ 5. Phase 4: Risk Management (The Math) This is the V2 upgrade. We aim for higher profitability. 1. Stop Loss (SL): o Longs: Placed strictly below the lowest EMA band. o Shorts: Placed strictly above the highest EMA band. o Logic: If price crosses the EMA band completely, the trend is dead. Get out. 2. Take Profit (TP): o FIXED 3R (Reward = 3x Risk). o Example: If Risk is $100, TP is set to make $300. o Rule: Do not move the TP. Do not close early. Let the math play out. ________________________________________ Summary Checklist (Print This) Time: Is the First 2H bias clear? (Green=Buy / Red=Sell) Switch: Did price close above/below the Daily Open? Trend: Are EMAs crossed and Supertrend agreeing? Patience: Did I wait for the price to pull back to the EMA band? Trigger: Did the candle close respecting the EMA? Execution: Market Entry + Stop Loss behind EMA + Fixed 3R Target. Mindset: Am I at "2/10" emotion? Set the trade and walk away.
กลยุทธ์ Pine Script®
โดย purplebelt
Session Volume Profile Sniffer: HVN & Rejection ZonesA simple tool built for traders who rely on intraday volume structure. What this script does This script tracks volume distribution inside a selected session and highlights two key price levels: High Volume Nodes (HVNs) — areas where price spent time building heavy participation. Low Volume Nodes (LVNs) — thin zones where price moved quickly with very little interest. Instead of plotting a full profile, this tool gives you the exact rejection-level lines you usually hunt manually. Why these levels matter HVN → price tends to react, stall, or flip direction LVN → price often rejects strongly since liquidity is thin Rejection patterns around these areas give clean entry signals Positioning trades around HVN/LVN helps filter noise in choppy sessions This script removes the trouble of drawing profiles, counting bins, or guessing node levels. Everything is calculated inside the session you choose. How the detection works Inside your session window, the script: 1. Tracks each tick-based price bucket 2. Accumulates raw volume for every bucket Identifies: HVNs = buckets with volume above a tier LVNs = buckets with volume below a tier 3. Prints each level as a single clean line 4. Generates: Long signal → bounce from LVN Short signal → rejection from HVN Built-in exits use ATR-based conditions for quick testing. Features Session-based volume mapping HVN + LVN levels drawn automatically Entry triggers based on rejection ATR exits for experimental backtests Clean, minimal visual output Best use cases Intraday futures Index scalping FX sessions (London / NY) Crypto sessions (user-timed) Anyone who trades around volume structure Adjustable settings Session window Volume bin size HVN multiplier LVN multiplier Enable/disable zone lines This keeps it flexible enough for both scalpers and slow-paced intraday setups. Important note This script is built for study + idea testing. It is not intended as a final system. Once you identify how price behaves around these nodes, you can blend this tool into your own setup.
กลยุทธ์ Pine Script®
โดย AIScripts
Simple Candle Strategy# Candle Pattern Strategy - Pine Script V6 ## Overview A TradingView trading strategy script (Pine Script V6) that identifies candlestick patterns over a configurable lookback period and generates trading signals based on pattern recognition rules. ## Strategy Logic The strategy analyzes the most recent N candlesticks (default: 5) and classifies their patterns into three categories, then generates buy/sell signals based on specific pattern combinations. ### Candlestick Pattern Classification Each candlestick is classified as one of three types: | Pattern | Definition | Formula | |---------|-----------|---------| | **Close at High** | Close price near the highest price of the candle | `(high - close) / (high - low) ≤ (1 - threshold)` | | **Close at Low** | Close price near the lowest price of the candle | `(close - low) / (high - low) ≤ (1 - threshold)` | | **Doji** | Opening and closing prices very close; long upper/lower wicks | `abs(close - open) / (high - low) ≤ threshold` | ### Trading Rules | Condition | Action | Signal | |-----------|--------|--------| | Number of Doji candles ≥ 3 | **SKIP** - Market is too chaotic | No trade | | "Close at High" count ≥ 2 + Last candle closes at high | **LONG** - Bullish confirmation | Buy Signal | | "Close at Low" count ≥ 2 + Last candle closes at low | **SHORT** - Bearish confirmation | Sell Signal | ## Configuration Parameters All parameters are adjustable in TradingView's "Settings/Inputs" tab: | Parameter | Default | Range | Description | |-----------|---------|-------|-------------| | **K-line Lookback Period** | 5 | 3-20 | Number of candlesticks to analyze | | **Doji Threshold** | 0.1 | 0.0-1.0 | Body size / Total range ratio for doji identification | | **Doji Count Limit** | 3 | 1-10 | Number of dojis that triggers skip signal | | **Close at High Proximity** | 0.9 | 0.5-1.0 | Required proximity to highest price (0.9 = 90%) | | **Close at Low Proximity** | 0.9 | 0.5-1.0 | Required proximity to lowest price (0.9 = 90%) | ### Parameter Tuning Guide #### Proximity Thresholds (Close at High/Low) - **0.95 or higher**: Stricter - only very strong candles qualify - **0.90 (default)**: Balanced - good for most market conditions - **0.80 or lower**: Looser - catches more patterns, higher false signals #### Doji Threshold - **0.05-0.10**: Strict doji identification - **0.10-0.15**: Standard doji detection - **0.15+**: Includes near-doji patterns #### Lookback Period - **3-5 bars**: Fast, sensitive to recent patterns - **5-10 bars**: Balanced approach - **10-20 bars**: Slower, filters out noise ## Visual Indicators ### Chart Markers - **Green Up Arrow** ▲: Long entry signal triggered - **Red Down Arrow** ▼: Short entry signal triggered - **Gray X**: Skip signal (too many dojis detected) ### Statistics Table Located at top-right corner, displays real-time pattern counts: - **Close at High**: Count of candles closing near the high - **Close at Low**: Count of candles closing near the low - **Doji**: Count of doji/near-doji patterns ### Signal Labels - Green label: "✓ Long condition met" - below entry bar - Red label: "✓ Short condition met" - above entry bar - Gray label: "⊠ Too many dojis, skip" - trade skipped ## Risk Management ### Exit Strategy The strategy includes built-in exit rules based on ATR (Average True Range): - **Stop Loss**: ATR × 2 - **Take Profit**: ATR × 3 Example: If ATR is $10, stop loss is at -$20 and take profit is at +$30 ### Position Sizing Default: 100% of equity per trade (adjustable in strategy properties) **Recommendation**: Reduce to 10-25% of equity for safer capital allocation ## How to Use ### 1. Copy the Script 1. Open TradingView 2. Go to Pine Script Editor 3. Create a new indicator 4. Copy the entire `candle_pattern_strategy.pine` content 5. Click "Add to Chart" ### 2. Apply to Chart - Select your preferred timeframe (1m, 5m, 15m, 1h, 4h, 1d) - Choose a trading symbol (stocks, forex, crypto, etc.) - The strategy will generate signals on all historical bars and in real-time ### 3. Configure Parameters 1. Right-click the strategy on chart → "Settings" 2. Adjust parameters in the "Inputs" tab 3. Strategy will recalculate automatically 4. Backtest results appear in the Strategy Tester panel ### 4. Backtesting 1. Click "Strategy Tester" (bottom panel) 2. Set date range for historical testing 3. Review performance metrics: - Win rate - Profit factor - Drawdown - Total returns ## Key Features ✅ **Execution Model Compliant** - Follows official Pine Script V6 standards ✅ **Global Scope** - All historical references in global scope for consistency ✅ **Adjustable Sensitivity** - Fine-tune all pattern detection thresholds ✅ **Real-time Updates** - Works on both historical and real-time bars ✅ **Visual Feedback** - Clear signals with labels and statistics table ✅ **Risk Management** - Built-in ATR-based stop loss and take profit ✅ **No Repainting** - Signals remain consistent after bar closes ## Important Notes ### Before Trading Live 1. **Backtest thoroughly**: Test on at least 6-12 months of historical data 2. **Paper trading first**: Practice with simulated trades 3. **Optimize parameters**: Find the best settings for your trading instrument 4. **Manage risk**: Never risk more than 1-2% per trade 5. **Monitor performance**: Review trades regularly and adjust as needed ### Market Conditions The strategy works best in: - Trending markets with clear directional bias - Range-bound markets with defined support/resistance - Markets with moderate volatility The strategy may underperform in: - Highly choppy/noisy markets (many false signals) - Markets with gaps or overnight gaps - Low liquidity periods ### Limitations - Works on chart timeframes only (not intrabar analysis) - Requires at least 5 bars of history (configurable) - Fixed exit rules may not suit all trading styles - No trend filtering (will trade both directions) ## Technical Details ### Historical Buffer Management The strategy declares maximum bars back to ensure enough historical data: ```pine max_bars_back(close, 20) max_bars_back(open, 20) max_bars_back(high, 20) max_bars_back(low, 20) ``` This prevents runtime errors when accessing historical candlestick data. ### Pattern Detection Algorithm ``` For each bar in lookback period: 1. Calculate (high - close) / (high - low) → close_to_high_ratio 2. If close_to_high_ratio ≤ (1 - threshold) → count as "Close at High" 3. Calculate (close - low) / (high - low) → close_to_low_ratio 4. If close_to_low_ratio ≤ (1 - threshold) → count as "Close at Low" 5. Calculate abs(close - open) / (high - low) → body_ratio 6. If body_ratio ≤ doji_threshold → count as "Doji" Signal Generation: 7. If doji_count ≥ cross_count_limit → SKIP_SIGNAL 8. If close_at_high_count ≥ 2 AND last_close_at_high → LONG_SIGNAL 9. If close_at_low_count ≥ 2 AND last_close_at_low → SHORT_SIGNAL ``` ## Example Scenarios ### Scenario 1: Bullish Signal ``` Last 5 bars pattern: Bar 1: Closes at high (95%) ✓ Bar 2: Closes at high (92%) ✓ Bar 3: Closes at mid (50%) Bar 4: Closes at low (10%) Bar 5: Closes at high (96%) ✓ (last bar) Result: - Close at high count: 3 (≥ 2) ✓ - Last closes at high: ✓ - Doji count: 0 (< 3) ✓ → LONG SIGNAL ✓ ``` ### Scenario 2: Skip Signal ``` Last 5 bars pattern: Bar 1: Doji pattern ✓ Bar 2: Doji pattern ✓ Bar 3: Closes at mid Bar 4: Doji pattern ✓ Bar 5: Closes at high Result: - Doji count: 3 (≥ 3) → SKIP SIGNAL - Market too chaotic ``` ## Performance Optimization ### Tips for Better Results 1. **Use Higher Timeframes**: 15m or higher reduces false signals 2. **Combine with Indicators**: Add volume or trend filters 3. **Seasonal Adjustment**: Different parameters for different seasons 4. **Instrument Selection**: Test on liquid, high-volume instruments 5. **Regular Rebalancing**: Adjust parameters quarterly based on performance ## Troubleshooting ### No Signals Generated - Check if lookback period is too large - Verify proximity thresholds aren't too strict (try 0.85 instead of 0.95) - Ensure doji limit allows for trading (try 4-5 instead of 3) ### Too Many False Signals - Increase proximity thresholds to 0.95+ - Reduce lookback period to 3-4 bars - Increase doji limit to 3-4 - Test on higher timeframes ### Strategy Tester Shows Losses - Review individual trades to identify patterns - Adjust stop loss and take profit ratios - Change lookback period and thresholds - Test on different market conditions ## References - (www.tradingview.com) - (www.tradingview.com) - (www.investopedia.com) - (www.investopedia.com) ## Disclaimer **This strategy is provided for educational and research purposes only.** - Not financial advice - Past performance does not guarantee future results - Always conduct thorough backtesting before live trading - Trading involves significant risk of loss - Use proper risk management and position sizing ## License Created: December 15, 2025 Version: 1.0 --- **For updates and modifications, refer to the accompanying documentation files.**
กลยุทธ์ Pine Script®
โดย masteraux101
Backtest any Indicator [Target Mode] StrategyUniversal Backtester Strategy with Sequential Logic This strategy serves as a highly versatile, universal backtesting engine designed to test virtually any indicator-based trading system without requiring custom code for every new idea. It transforms standard indicator comparisons into a robust trading strategy with advanced features like sequential entry steps, dynamic target modes, and automated webhook alerts. The core philosophy of this script is flexibility. Whether you are testing simple crossovers (e.g., MA Cross) or complex multi-stage setups (e.g., RSI overbought followed by a MACD flip), this tool allows you to configure logic via the settings panel and immediately see backtested results with professional-grade risk management. Core Logic: Source vs. Target Mode The fundamental building block of this strategy is the "Comparator" engine. Instead of hard-coding specific indicators, the script allows users to define logic slots (L1-L5 for Longs, S1-S5 for Shorts). Each slot operates on a flexible comparison logic: Source: The primary indicator you are testing (e.g., Close Price, RSI, Volume). Operator: The condition to check (Equal/Cross, Greater Than, Less Than). Target Mode: Value Mode: Compares the Source against a fixed number (e.g., RSI > 70). Source Mode: Compares the Source against another dynamic indicator (e.g., Close > SMA 200). This "Target Mode" switch allows the strategy to adapt to almost any technical analysis concept, from oscillator levels to moving average trends. Advanced Entry System: Sequential Steps (1-5) Unlike standard backtesters that usually require all conditions to happen simultaneously (AND logic), this strategy implements a State Machine for sequential execution. Each of the 5 entry slots (L1-L5 / S1-S5) is assigned a "Step" number. The logic flows as follows: Stage 1: The strategy waits for all conditions assigned to "Step 1" to be true. Latch & Wait: Once Step 1 is met, the strategy "remembers" this and advances to Stage 2. It waits for a subsequent bar to satisfy Step 2 conditions. Trigger: The actual trade entry is only executed once the highest assigned step is completed. Example Use Case: Step 1: Price closes below the Lower Bollinger Band (Dip). Step 2: RSI crosses back above 30 (Confirmation). Execution: Buy Signal triggers on the Step 2 confirmation candle. This creates a realistic "Setup -> Trigger" workflow common in professional trading, preventing premature entries. Exit Logic & Risk Management The strategy employs a dual-layer exit system to maximize profit retention and protect capital. 1. Signal-Based Exits (OR Logic) There are 5 configurable exit slots (LX1-LX5 / SX1-SX5). Unlike entries, these operate on "OR" logic. If any enabled exit condition is met (e.g., RSI becomes overbought OR Price crosses below EMA), the position is closed immediately. 2. Hard Stop & Take Profit Fixed %: Users can set a hard percentage-based Stop Loss and Take Profit. Trailing Stop: A toggleable "Trailing?" feature allows the Stop Loss to dynamically trail the price. Longs: The SL moves up as the price makes new highs. Shorts: The SL moves down as the price makes new lows. Automated Alerts & Webhooks This script is built with automation in mind. It includes a dedicated makeJson() function that constructs a JSON payload compatible with most trading bots (e.g., 3Commas, TradersPost, Tealstreet). Alert Modes Supported: | Alert Type | Description | | :--- | :--- | | Order Fills Only | Triggers standard TradingView strategy alerts when the broker emulator fills an order. | | Alert() Function | Triggers specific JSON payloads defined in the code ("action": "buy", "ticker": "MNQ", etc.). | The script automatically calculates the alert quantity based on your equity percentage settings, ensuring the payload matches your backtest sizing. Dashboard & Visuals To aid in rapid analysis, the strategy includes visual tools directly on the chart: Performance Table: A dashboard (top-right) displays real-time stats including Net Profit, Win Rate, Profit Factor, and Max Drawdown. Trade Markers: Custom labels (goLong, exLong) show exactly where trades opened and closed, including the trade number and profit percentage. SL/TP Visualization: Dynamic step-lines (Orange for SL, Lime for TP) show exactly where your protection levels are sitting, helping you visually verify if your stops are too tight or too loose.
กลยุทธ์ Pine Script®
โดย jegbejimba