PINE LIBRARY

TA

ที่อัปเดต:
Library "TA"
General technical analysis functions

div_bull(pS, iS, cp_length_after, cp_length_before, pivot_length, lookback, no_broken, pW, iW, hidW, regW)
  Test for bullish divergence
  Parameters:
    pS: Price series (float)
    iS: Indicator series (float)
    cp_length_after: Bars after current (divergent) pivot low to be considered a valid pivot (optional int)
    cp_length_before: Bars before current (divergent) pivot low to be considered a valid pivot (optional int)
    pivot_length: Bars before and after prior pivot low to be considered valid pivot (optional int)
    lookback: Bars back to search for prior pivot low (optional int)
    no_broken: Flag to only consider divergence valid if the pivot-to-pivot trendline is unbroken (optional bool)
    pW: Weight of change in price, used in degree of divergence calculation (optional float)
    iW: Weight of change in indicator, used in degree of divergence calculation (optional float)
    hidW: Weight of hidden divergence, used in degree of divergence calculation (optional float)
    regW: Weight of regular divergence, used in degree of divergence calculation (optional float)
  Returns: [flag,degree,type,lx1,ly1,lx2,ly2]
flag = true if divergence exists (bool)
degree = degree (strength) of divergence (float)
type = 1 = regular, 2 = hidden (int)
lx1 = x coordinate 1 (int)
ly1 = y coordinate 1 (float)
lx2 = x coordinate 2 (int)
ly2 = y coordinate 2 (float)

div_bear(pS, iS, cp_length_after, cp_length_before, pivot_length, lookback, no_broken, pW, iW, hidW, regW)
  Test for bearish divergence
  Parameters:
    pS: Price series (float)
    iS: Indicator series (float)
    cp_length_after: Bars after current (divergent) pivot high to be considered a valid pivot (optional int)
    cp_length_before: Bars before current (divergent) pivot highto be considered a valid pivot (optional int)
    pivot_length: Bars before and after prior pivot high to be considered valid pivot (optional int)
    lookback: Bars back to search for prior pivot high (optional int)
    no_broken: Flag to only consider divergence valid if the pivot-to-pivot trendline is unbroken (optional bool)
    pW: Weight of change in price, used in degree of divergence calculation (optional float)
    iW: Weight of change in indicator, used in degree of divergence calculation (optional float)
    hidW: Weight of hidden divergence, used in degree of divergence calculation (optional float)
    regW: Weight of regular divergence, used in degree of divergence calculation (optional float)
  Returns: [flag,degree,type,lx1,ly1,lx2,ly2]
flag = true if divergence exists (bool)
degree = degree (strength) of divergence (float)
type = 1 = regular, 2 = hidden (int)
lx1 = x coordinate 1 (int)
ly1 = y coordinate 1 (float)
lx2 = x coordinate 2 (int)
ly2 = y coordinate 2 (float)
เอกสารเผยแพร่
v2
Return absolute value of degree to handle series with negative values.
เอกสารเผยแพร่
v3
- Added support for lookback # of pivots for div_bull() and div_bear()
- Fixed divergence degree calculation when indicator series has negative values
- Changed default pivot lengths for div_bull() and div_bear()

Updated:
div_bull(pS, iS, cp_length_after, cp_length_before, pivot_length, lookback, lookback_pivs, no_broken, pW, iW, hidW, regW)
  Test for bullish divergence
  Parameters:
    pS: Price series (float)
    iS: Indicator series (float)
    cp_length_after: Bars after current (divergent) pivot low to be considered a valid pivot (optional int)
    cp_length_before: Bars before current (divergent) pivot low to be considered a valid pivot (optional int)
    pivot_length: Bars before and after prior pivot low to be considered valid pivot (optional int)
    lookback: Bars back to search for prior pivot low (optional int)
    lookback_pivs: Pivots back to search for prior pivot low (optional int)
    no_broken: Flag to only consider divergence valid if the pivot-to-pivot trendline is unbroken (optional bool)
    pW: Weight of change in price, used in degree of divergence calculation (optional float)
    iW: Weight of change in indicator, used in degree of divergence calculation (optional float)
    hidW: Weight of hidden divergence, used in degree of divergence calculation (optional float)
    regW: Weight of regular divergence, used in degree of divergence calculation (optional float)
  Returns: [flag,degree,type,lx1,ly1,lx2,ly2]
flag = true if divergence exists (bool)
degree = degree (strength) of divergence (float)
type = 1 = regular, 2 = hidden (int)
lx1 = x coordinate 1 (int)
ly1 = y coordinate 1 (float)
lx2 = x coordinate 2 (int)
ly2 = y coordinate 2 (float)

div_bear(pS, iS, cp_length_after, cp_length_before, pivot_length, lookback, lookback_pivs, no_broken, pW, iW, hidW, regW)
  Test for bearish divergence
  Parameters:
    pS: Price series (float)
    iS: Indicator series (float)
    cp_length_after: Bars after current (divergent) pivot high to be considered a valid pivot (optional int)
    cp_length_before: Bars before current (divergent) pivot highto be considered a valid pivot (optional int)
    pivot_length: Bars before and after prior pivot high to be considered valid pivot (optional int)
    lookback: Bars back to search for prior pivot high (optional int)
    lookback_pivs: Pivots back to search for prior pivot high (optional int)
    no_broken: Flag to only consider divergence valid if the pivot-to-pivot trendline is unbroken (optional bool)
    pW: Weight of change in price, used in degree of divergence calculation (optional float)
    iW: Weight of change in indicator, used in degree of divergence calculation (optional float)
    hidW: Weight of hidden divergence, used in degree of divergence calculation (optional float)
    regW: Weight of regular divergence, used in degree of divergence calculation (optional float)
  Returns: [flag,degree,type,lx1,ly1,lx2,ly2]
flag = true if divergence exists (bool)
degree = degree (strength) of divergence (float)
type = 1 = regular, 2 = hidden (int)
lx1 = x coordinate 1 (int)
ly1 = y coordinate 1 (float)
lx2 = x coordinate 2 (int)
ly2 = y coordinate 2 (float)
เอกสารเผยแพร่
v4
Changed divergence strength/degree calculation to use the angle of the divergence line divided by 90 degrees (as opposed to the % change in the indicator value). This will keep the unweighted strength value between 0 and 1 for the indicator portion of the calculation, which is desirable because different indicator series can have wildly different ranges.
เอกสารเผยแพร่
v5
Added chk_prev_bar flag as an argument to the divergence checks, which will check for divergence using the indicator value from the prior bar. This is necessary in some cases where the indicator is using a different price source than the one passed into the divergence function.

Updated:
div_bull(pS, iS, chk_prev_bar, cp_length_after, cp_length_before, pivot_length, lookback, lookback_pivs, no_broken, pW, iW, hidW, regW)
  Test for bullish divergence
  Parameters:
    pS: Price series (float)
    iS: Indicator series (float)
    chk_prev_bar: Flag to check for divergence using the indicator value from the prior bar. This is necessary in some cases where the indicator is using a different price source than the one passed in pS.
    cp_length_after: Bars after current (divergent) pivot low to be considered a valid pivot (optional int)
    cp_length_before: Bars before current (divergent) pivot low to be considered a valid pivot (optional int)
    pivot_length: Bars before and after prior pivot low to be considered valid pivot (optional int)
    lookback: Bars back to search for prior pivot low (optional int)
    lookback_pivs: Pivots back to search for prior pivot low (optional int)
    no_broken: Flag to only consider divergence valid if the pivot-to-pivot trendline is unbroken (optional bool)
    pW: Weight of change in price, used in degree of divergence calculation (optional float)
    iW: Weight of change in indicator, used in degree of divergence calculation (optional float)
    hidW: Weight of hidden divergence, used in degree of divergence calculation (optional float)
    regW: Weight of regular divergence, used in degree of divergence calculation (optional float)
  Returns: [flag,degree,type,lx1,ly1,lx2,ly2]
flag = true if divergence exists (bool)
degree = degree (strength) of divergence (float)
type = 1 = regular, 2 = hidden (int)
lx1 = x coordinate 1 (int)
ly1 = y coordinate 1 (float)
lx2 = x coordinate 2 (int)
ly2 = y coordinate 2 (float)

div_bear(pS, iS, chk_prev_bar, cp_length_after, cp_length_before, pivot_length, lookback, lookback_pivs, no_broken, pW, iW, hidW, regW)
  Test for bearish divergence
  Parameters:
    pS: Price series (float)
    iS: Indicator series (float)
    chk_prev_bar: Flag to check for divergence using the indicator value from the prior bar. This is necessary in some cases where the indicator is using a different price source than the one passed in pS.
    cp_length_after: Bars after current (divergent) pivot high to be considered a valid pivot (optional int)
    cp_length_before: Bars before current (divergent) pivot highto be considered a valid pivot (optional int)
    pivot_length: Bars before and after prior pivot high to be considered valid pivot (optional int)
    lookback: Bars back to search for prior pivot high (optional int)
    lookback_pivs: Pivots back to search for prior pivot high (optional int)
    no_broken: Flag to only consider divergence valid if the pivot-to-pivot trendline is unbroken (optional bool)
    pW: Weight of change in price, used in degree of divergence calculation (optional float)
    iW: Weight of change in indicator, used in degree of divergence calculation (optional float)
    hidW: Weight of hidden divergence, used in degree of divergence calculation (optional float)
    regW: Weight of regular divergence, used in degree of divergence calculation (optional float)
  Returns: [flag,degree,type,lx1,ly1,lx2,ly2]
flag = true if divergence exists (bool)
degree = degree (strength) of divergence (float)
type = 1 = regular, 2 = hidden (int)
lx1 = x coordinate 1 (int)
ly1 = y coordinate 1 (float)
lx2 = x coordinate 2 (int)
ly2 = y coordinate 2 (float)
เอกสารเผยแพร่
v6
When calculating the divergence strength on an indicator, Scale the X coordinates to a range similar to the Y scale (X and Y scales should be on the same order of magnitude for the angle value to be meaningful. e.g. if ΔY is 10,000,000 and ΔX is 12, the angle will always be very nearly 90 degrees, which makes for a meaningless value)
เอกสารเผยแพร่
v7
Adjusted multiplier in iDelta() to use the average Y value rather than the difference of the two Y values.
เอกสารเผยแพร่
v8
Now calculating divergence strength in terms of the standard deviation.
= Δ price/StDev + Δ indicator/stDev (multiplied by specified weights)
เอกสารเผยแพร่
v9
เอกสารเผยแพร่
v10
Changes to check more thoroughly for pivots on indicator series.

Updated:
div_bull(pS, iS, cp_length_after, cp_length_before, pivot_length, lookback, lookback_pivs, no_broken, pW, iW, hidW, regW)
  Test for bullish divergence
  Parameters:
    pS: Price series (float)
    iS: Indicator series (float)
    cp_length_after: Bars after current (divergent) pivot low to be considered a valid pivot (optional int)
    cp_length_before: Bars before current (divergent) pivot low to be considered a valid pivot (optional int)
    pivot_length: Bars before and after prior pivot low to be considered valid pivot (optional int)
    lookback: Bars back to search for prior pivot low (optional int)
    lookback_pivs: Pivots back to search for prior pivot low (optional int)
    no_broken: Flag to only consider divergence valid if the pivot-to-pivot trendline is unbroken (optional bool)
    pW: Weight of change in price, used in degree of divergence calculation (optional float)
    iW: Weight of change in indicator, used in degree of divergence calculation (optional float)
    hidW: Weight of hidden divergence, used in degree of divergence calculation (optional float)
    regW: Weight of regular divergence, used in degree of divergence calculation (optional float)
  Returns: [flag,degree,type,lx1,ly1,lx2,ly2]
flag = true if divergence exists (bool)
degree = degree (strength) of divergence (float)
type = 1 = regular, 2 = hidden (int)
lx1 = x coordinate 1 (int)
ly1 = y coordinate 1 (float)
lx2 = x coordinate 2 (int)
ly2 = y coordinate 2 (float)

div_bear(pS, iS, cp_length_after, cp_length_before, pivot_length, lookback, lookback_pivs, no_broken, pW, iW, hidW, regW)
  Test for bearish divergence
  Parameters:
    pS: Price series (float)
    iS: Indicator series (float)
    cp_length_after: Bars after current (divergent) pivot high to be considered a valid pivot (optional int)
    cp_length_before: Bars before current (divergent) pivot highto be considered a valid pivot (optional int)
    pivot_length: Bars before and after prior pivot high to be considered valid pivot (optional int)
    lookback: Bars back to search for prior pivot high (optional int)
    lookback_pivs: Pivots back to search for prior pivot high (optional int)
    no_broken: Flag to only consider divergence valid if the pivot-to-pivot trendline is unbroken (optional bool)
    pW: Weight of change in price, used in degree of divergence calculation (optional float)
    iW: Weight of change in indicator, used in degree of divergence calculation (optional float)
    hidW: Weight of hidden divergence, used in degree of divergence calculation (optional float)
    regW: Weight of regular divergence, used in degree of divergence calculation (optional float)
  Returns: [flag,degree,type,lx1,ly1,lx2,ly2]
flag = true if divergence exists (bool)
degree = degree (strength) of divergence (float)
type = 1 = regular, 2 = hidden (int)
lx1 = x coordinate 1 (int)
ly1 = y coordinate 1 (float)
lx2 = x coordinate 2 (int)
ly2 = y coordinate 2 (float)
เอกสารเผยแพร่
v11
div_bull() and div_bear() - adjusted indicator pivot checking to be more inclusive.
เอกสารเผยแพร่
v12
Added function for validating harmonic XABCD patterns: harmonic_validate_xabcd()

Added:
harmonic_validate_xabcd(xX, xY, aX, aY, bX, bY, cX, cY, dX, dY, pErr, pAsym, pivot_length, gart, bat, bfly, crab)
  Validate harmonic XABCD pattern
  Parameters:
    xX: X coordinate of point X (int)
    xY: Y coordinate of point X (float)
    aX: X coordinate of point A (int)
    aY: Y coordinate of point A (float)
    bX: X coordinate of point B (int)
    bY: Y coordinate of point B (float)
    cX: X coordinate of point C (int)
    cY: Y coordinate of point C (float)
    dX: X coordinate of point D (int)
    dY: Y coordinate of point D (float)
    pErr: Acceptable percent error of leg ratios (does not apply to legs defined within a range) (float)
    pAsym: Acceptable percent asymmetry of leg ΔX (each leg tested against average ΔX of prior legs) (float)
    pivot_length: Bars before and after prior pivot high to be considered valid pivot (optional int)
    gart: Flag to validate Gartley pattern (bool)
    bat: Flag to validate Bat pattern (bool)
    bfly: Flag to validate Butterfly pattern (bool)
    crab: Flag to validate Crab pattern (bool)
  Returns: [flag,t1,t2,t3,t4]
flag = true if valid harmonic
t1 = true if valid gartley
t2 = true if valid bat
t3 = true if valid butterfly
t4 = true if valid crab
เอกสารเผยแพร่
v13

Added pattern_xabcd() - determine if an XABCD pattern has just completed.

Added:
pattern_xabcd(x_is_low, pivot_length, source)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
เอกสารเผยแพร่
v14

Added:
pat_xabcd(x_is_low, pivot_length, source)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)

Removed:
pattern_xabcd(x_is_low, pivot_length, source)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
เอกสารเผยแพร่
v15
Fixed point D validation for harmonic XABCD pattern
เอกสารเผยแพร่
v16
Fixed harmonic XABCD ΔX symmetry validation
เอกสารเผยแพร่
v17

Added:
harmonic_xabcd_validate(xX, xY, aX, aY, bX, bY, cX, cY, dX, dY, pErr, pAsym, pivot_length, gart, bat, bfly, crab)
  Validate harmonic XABCD pattern
  Parameters:
    xX: X coordinate of point X (int)
    xY: Y coordinate of point X (float)
    aX: X coordinate of point A (int)
    aY: Y coordinate of point A (float)
    bX: X coordinate of point B (int)
    bY: Y coordinate of point B (float)
    cX: X coordinate of point C (int)
    cY: Y coordinate of point C (float)
    dX: X coordinate of point D (int)
    dY: Y coordinate of point D (float)
    pErr: Acceptable percent error of leg ratios (does not apply to legs defined within a range) (float)
    pAsym: Acceptable percent asymmetry of leg ΔX (each leg tested against average ΔX of prior legs) (float)
    pivot_length: Bars before and after prior pivot high to be considered valid pivot (optional int)
    gart: Flag to validate Gartley pattern (bool)
    bat: Flag to validate Bat pattern (bool)
    bfly: Flag to validate Butterfly pattern (bool)
    crab: Flag to validate Crab pattern (bool)
  Returns: [flag,t1,t2,t3,t4]
flag = true if valid harmonic
t1 = true if valid gartley
t2 = true if valid bat
t3 = true if valid butterfly
t4 = true if valid crab

harmonic_xabcd_prz(type, xY, aY, bY, cY)
  Get the potential reversal zone (PRZ) levels of a harmonic XABCD pattern
  Parameters:
    type: Harmonic pattern type (int - 1 = Gartley, 2 = Bat, 3 = Butterfly, 4 = Crab)
    xY: Y coordinate of point X (float)
    aY: Y coordinate of point A (float)
    bY: Y coordinate of point B (float)
    cY: Y coordinate of point C (float)
  Returns: [bc_u, bc_l, xa_u, xa_l]
bc_u = nearest BC retracement/extension level (nearest to point C)
bc_l = farthest BC retracement/extension level (nearest to point C)
xa_u = nearest XA retracement/extension level (or the only XA level, if applicable)
xa_l = farthest XA retracement/extension level (or na if not applicable)

Removed:
harmonic_validate_xabcd(xX, xY, aX, aY, bX, bY, cX, cY, dX, dY, pErr, pAsym, pivot_length, gart, bat, bfly, crab)
  Validate harmonic XABCD pattern
เอกสารเผยแพร่
v18
Fixed harmonic retracement validation
เอกสารเผยแพร่
v19

Added:
harmonic_xabcd_validateIncomplete(xX, xY, aX, aY, bX, bY, cX, cY, pErr, pAsym, pivot_length, gart, bat, bfly, crab)
  Validate the first 3 legs of a harmonic XABCD pattern
  Parameters:
    xX: X coordinate of point X (int)
    xY: Y coordinate of point X (float)
    aX: X coordinate of point A (int)
    aY: Y coordinate of point A (float)
    bX: X coordinate of point B (int)
    bY: Y coordinate of point B (float)
    cX: X coordinate of point C (int)
    cY: Y coordinate of point C (float)
    pErr: Acceptable percent error of leg ratios (does not apply to legs defined within a range) (float)
    pAsym: Acceptable percent asymmetry of leg ΔX (each leg tested against average ΔX of prior legs) (float)
    pivot_length: Bars before and after prior pivot high to be considered valid pivot (optional int)
    gart: Flag to validate Gartley pattern (bool)
    bat: Flag to validate Bat pattern (bool)
    bfly: Flag to validate Butterfly pattern (bool)
    crab: Flag to validate Crab pattern (bool)
  Returns: [flag,t1,t2,t3,t4]
flag = true if valid harmonic
t1 = true if valid gartley
t2 = true if valid bat
t3 = true if valid butterfly
t4 = true if valid crab
เอกสารเผยแพร่
v20
Fixed bug with pat_axbcd() algorithm, checking wrong pivot looking for point C in bearish patterns.
เอกสารเผยแพร่
v21
Fixed bug in pat_xabcd() where intermediate low wasn't being detected between points C and D
เอกสารเผยแพร่
v22

Added:
harmonic_xabcd_przClosest(l1, l2, l3, l4)
  Get the confluent PRZ levels (i.e. the two closest PRZ levels)
Order of arguments does not matter
  Parameters:
    l1: level 1 (float)
    l2: level 2 (float)
    l3: level 3 (float)
    l4: level 4 (optional, float)
  Returns: [lL,lH]
lL = lower confluent PRZ level
lH = higher confluent PRZ level
เอกสารเผยแพร่
v23

Added:
success(entry, stop, t1, t2)
  Determine if trade is successful
  Parameters:
    entry: Entry bar index (int)
    stop: Stop level (float)
    t1: Target 1 level (float)
    t2: Target 2 level (float)
  Returns: [t1Hit,t2Hit,t1x,t1y,t2x,t2y]
เอกสารเผยแพร่
v24

Added:
harmonic_xabcd_rAndE(type, l, l1, l2)
  Get the ratio of two pattern legs, and the percent error from the theoretical harmonic ratio
Order of arguments does not matter
  Parameters:
    type: Harmonic pattern type (int - 1 = Gartley, 2 = Bat, 3 = Butterfly, 4 = Crab)
    l: Leg ID ("xab", "abc", "bcd", or "xad") (string)
    l1: Line 1 height (float)
    l2: Line 2 height (float)
  Returns: [r,e]
เอกสารเผยแพร่
v25

Added:
harmonic_xabcd_przRange()
  Get upper and lower PRZ levels

harmonic_xabcd_eD()
  Measure closeness of D to either of the two closest PRZ levels, relative to height of the XA leg

przScore()
  Measure the closeness of the two closest PRZ levels, relative to the height of the XA leg

harmonic_xabcd_eAvg()
  Get the avg retracement ratio % error

harmonic_xabcd_targets()
  Get target level

pat_xabcd_asym()
  Get the avg asymmetry %
เอกสารเผยแพร่
v26

Added:
harmonic_xabcd_przScore()
  Measure the closeness of the two closest PRZ levels, relative to the height of the XA leg

Removed:
przScore()
  Measure the closeness of the two closest PRZ levels, relative to the height of the XA leg
เอกสารเผยแพร่
v27

Updated:
pat_xabcd(x_is_low, pivot_length, source, conf_length)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
เอกสารเผยแพร่
v28
เอกสารเผยแพร่
v29
เอกสารเผยแพร่
v30

Added:
harmonic_xabcd_score()
  Get score values for a pattern
เอกสารเผยแพร่
v31
Added Shark and Cypher XABCD patterns

Updated:
harmonic_xabcd_validate(xX, xY, aX, aY, bX, bY, cX, cY, dX, dY, pErr, pAsym, pivot_length, gart, bat, bfly, crab, shark, cyph)
  Validate harmonic XABCD pattern
  Parameters:
    xX: X coordinate of point X (int)
    xY: Y coordinate of point X (float)
    aX: X coordinate of point A (int)
    aY: Y coordinate of point A (float)
    bX: X coordinate of point B (int)
    bY: Y coordinate of point B (float)
    cX: X coordinate of point C (int)
    cY: Y coordinate of point C (float)
    dX: X coordinate of point D (int)
    dY: Y coordinate of point D (float)
    pErr: Acceptable percent error of leg ratios (does not apply to legs defined within a range) (float)
    pAsym: Acceptable percent asymmetry of leg ΔX (each leg tested against average ΔX of prior legs) (float)
    pivot_length: Bars before and after prior pivot high to be considered valid pivot (optional int)
    gart: Flag to validate Gartley pattern (bool)
    bat: Flag to validate Bat pattern (bool)
    bfly: Flag to validate Butterfly pattern (bool)
    crab: Flag to validate Crab pattern (bool)
    shark: Flag to validate Shark pattern (bool)
    cyph: Flag to validate Cypher pattern (bool)
  Returns: [flag,t1,t2,t3,t4,t5,t6]
flag = true if valid harmonic
t1 = true if valid gartley
t2 = true if valid bat
t3 = true if valid butterfly
t4 = true if valid crab
t5 = true if valid shark
t6 = true if valid cypher

harmonic_xabcd_validateIncomplete(xX, xY, aX, aY, bX, bY, cX, cY, pErr, pAsym, pivot_length, gart, bat, bfly, crab, shark, cyph)
  Validate the first 3 legs of a harmonic XABCD pattern
  Parameters:
    xX: X coordinate of point X (int)
    xY: Y coordinate of point X (float)
    aX: X coordinate of point A (int)
    aY: Y coordinate of point A (float)
    bX: X coordinate of point B (int)
    bY: Y coordinate of point B (float)
    cX: X coordinate of point C (int)
    cY: Y coordinate of point C (float)
    pErr: Acceptable percent error of leg ratios (does not apply to legs defined within a range) (float)
    pAsym: Acceptable percent asymmetry of leg ΔX (each leg tested against average ΔX of prior legs) (float)
    pivot_length: Bars before and after prior pivot high to be considered valid pivot (optional int)
    gart: Flag to validate Gartley pattern (bool)
    bat: Flag to validate Bat pattern (bool)
    bfly: Flag to validate Butterfly pattern (bool)
    crab: Flag to validate Crab pattern (bool)
    shark: Flag to validate Shark pattern (bool)
    cyph: Flag to validate Cypher pattern (bool)
  Returns: [flag,t1,t2,t3,t4]
flag = true if valid harmonic
t1 = true if valid gartley
t2 = true if valid bat
t3 = true if valid butterfly
t4 = true if valid crab
t5 = true if valid shark
t6 = true if valid cypher
เอกสารเผยแพร่
v32

Updated:
harmonic_xabcd_przScore()
  Measure the closeness of the two closest PRZ levels, relative to the height of the XA leg
เอกสารเผยแพร่
v33

Added:
harmonic_xabcd_fibDispTxt()
  Get fib ratio display text
เอกสารเผยแพร่
v34

Added:
harmonic_xabcd_symbol()
  Get pattern symbol
เอกสารเผยแพร่
v35

Added:
harmonic_xabcd_scoreTot()
  Get total weighted score value for a pattern
เอกสารเผยแพร่
v36

Removed:
harmonic_xabcd_scoreTot()
  Get total weighted score value for a pattern

harmonic_xabcd_fibDispTxt()
  Get fib ratio display text

harmonic_xabcd_symbol()
  Get pattern symbol
เอกสารเผยแพร่
v37

Added:
harmonic_xabcd_scoreTot()
  Get pattern's total weighted score
เอกสารเผยแพร่
v38

Added:
harmonic_xabcd_fibDispTxt()
  Get fib ratio display text

harmonic_xabcd_symbol()
  Get pattern symbol
เอกสารเผยแพร่
v39
เอกสารเผยแพร่
v40
เอกสารเผยแพร่
v41
เอกสารเผยแพร่
v42

Added:
harmonic_xabcd_stop()
  Get stop level
เอกสารเผยแพร่
v43
Fixed bug with cypher validation of point D (retracement of XC, not XA)
เอกสารเผยแพร่
v44
เอกสารเผยแพร่
v45
Removed redundant "==true" comparisons
เอกสารเผยแพร่
v46
Fixed bug with cypher PRZ level
เอกสารเผยแพร่
v47

Added:
pat_xabcd_avgDev()
  Get the average % deviation of an XABCD pattern
เอกสารเผยแพร่
v48
เอกสารเผยแพร่
v49
Testing
เอกสารเผยแพร่
v50
Testing
เอกสารเผยแพร่
v51

Added:
pat_xabcd_validate(xX, xY, aX, aY, bX, bY, cX, cY, dX, dY, pErr, pAsym)
  Validate custom XABCD pattern
  Parameters:
    xX: X coordinate of point X (int)
    xY: Y coordinate of point X (float)
    aX: X coordinate of point A (int)
    aY: Y coordinate of point A (float)
    bX: X coordinate of point B (int)
    bY: Y coordinate of point B (float)
    cX: X coordinate of point C (int)
    cY: Y coordinate of point C (float)
    dX: X coordinate of point D (int)
    dY: Y coordinate of point D (float)
    pErr: Acceptable percent error of leg ratios (does not apply to legs defined within a range) (float)
    pAsym: Acceptable percent asymmetry of leg ΔX (each leg tested against average ΔX of prior legs) (float)
  Returns: TRUE if pattern is valid

pat_xabcd_validateIncomplete(xX, xY, aX, aY, bX, bY, cX, cY, pErr, pAsym)
  Validate the first 3 legs of a custom XABCD pattern
  Parameters:
    xX: X coordinate of point X (int)
    xY: Y coordinate of point X (float)
    aX: X coordinate of point A (int)
    aY: Y coordinate of point A (float)
    bX: X coordinate of point B (int)
    bY: Y coordinate of point B (float)
    cX: X coordinate of point C (int)
    cY: Y coordinate of point C (float)
    pErr: Acceptable percent error of leg ratios (does not apply to legs defined within a range) (float)
    pAsym: Acceptable percent asymmetry of leg ΔX (each leg tested against average ΔX of prior legs) (float)
  Returns: TRUE if first 3 legs are valid

pat_xabcd_prz(xY, aY, bY, cY)
  Get the potential reversal zone (PRZ) levels of a custom XABCD pattern
  Parameters:
    xY: Y coordinate of point X (float)
    aY: Y coordinate of point A (float)
    bY: Y coordinate of point B (float)
    cY: Y coordinate of point C (float)
  Returns: [xad_lvl,bcd_lvl,xcd_lvl]
เอกสารเผยแพร่
v52

Updated:
harmonic_xabcd_eAvg()
  Get the avg retracement ratio % error
เอกสารเผยแพร่
v53
Fixed bug with success(), extra checks on entry bar
เอกสารเผยแพร่
v54

Added:
tradeClosed()
  Determine if Target or Stop was hit on the current bar
เอกสารเผยแพร่
v55
Bug fix for closed trade check
เอกสารเผยแพร่
v56
Bug fix for closed trade check
เอกสารเผยแพร่
v57

Updated:
pat_xabcd(x_is_low, pivot_length, source, conf_length, incomplete)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
    incomplete: Flag to return an incomplete XABC pattern (bool, dft = false)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
เอกสารเผยแพร่
v58
Short circuit incomplete XABCD pattern search
เอกสารเผยแพร่
v59

Updated:
harmonic_xabcd_przRange()
  Get upper and lower PRZ levels
เอกสารเผยแพร่
v60

Added:
harmonic_xabcd_entry()
เอกสารเผยแพร่
v61

Added:
xabcd_entryHit()
  Determine if entry level was reached. Assumes pattern is active/not timed out.
เอกสารเผยแพร่
v62
Updated przClosest check to exclude values of 0 (only used when actual retracement value < 0)
เอกสารเผยแพร่
v63
backed out last change
เอกสารเผยแพร่
v64
test
เอกสารเผยแพร่
v65
dont allow entry value < 0
เอกสารเผยแพร่
v66
Updated to use latest version of Fib script (improved efficiency for precise fibs)
เอกสารเผยแพร่
v67
test

Updated:
pat_xabcd(x_is_low, pivot_length, source, conf_length, incomplete)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
    incomplete: Flag to return an incomplete XABC pattern (bool, dft = false)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
เอกสารเผยแพร่
v68
Reverted test changes

Updated:
pat_xabcd(x_is_low, pivot_length, source, conf_length, incomplete)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
    incomplete: Flag to return an incomplete XABC pattern (bool, dft = false)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
เอกสารเผยแพร่
v69
Test allowing divergence checks with pivot length of 0
เอกสารเผยแพร่
v70

Updated:
pat_xabcd(x_is_low, pivot_length, source, conf_length, incomplete, inc_skipC)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
    incomplete: Flag to return an incomplete XABC pattern (bool, dft = false)
    inc_skipC: skip incomplete patterns whose point C is at or before this bar index (to avoid returning the same pattern on consecutive bars)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
เอกสารเผยแพร่
v71
เอกสารเผยแพร่
v72

Updated:
pat_xabcd(x_is_low, pivot_length, source, conf_length, incomplete, inc_skipC)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
    incomplete: Flag to return an incomplete XABC pattern (bool, dft = false)
    inc_skipC: skip incomplete patterns whose point C is at this bar index (to avoid returning the same pattern on consecutive bars)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
เอกสารเผยแพร่
v73
เอกสารเผยแพร่
v74
เอกสารเผยแพร่
v75

Updated:
pat_xabcd(x_is_low, pivot_length, source, conf_length, incomplete)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
    incomplete: Flag to return an incomplete XABC pattern (bool, dft = false)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
เอกสารเผยแพร่
v76

Updated:
tradeClosed(eX, eY, stop, t1h, t2h, t1, t2)
  Determine if Target or Stop was hit on the current bar
  Parameters:
    eX
    eY
    stop
    t1h
    t2h
    t1
    t2
เอกสารเผยแพร่
v77

Updated:
pat_xabcd(x_is_low, pivot_length, source, conf_length, incomplete)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
    incomplete: Flag to return an incomplete XABC pattern (bool, dft = false)
  Returns: [flag, x, a, b, c, d]
flag = true if valid XABCD pattern completed on previous bar
x = point X
a = point A
b = point B
c = point C
d = point D
เอกสารเผยแพร่
v78
test revert d.y to 0.0
เอกสารเผยแพร่
v79
Reverted changes using point object for pat_xabcd()

Updated:
pat_xabcd(x_is_low, pivot_length, source, conf_length, incomplete)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
    incomplete: Flag to return an incomplete XABC pattern (bool, dft = false)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
เอกสารเผยแพร่
v80
Add stop flag to tradeClosed()
เอกสารเผยแพร่
v81

Added:
test_cd(cd, bc, xa, xc, ad, pErr, p_types)
  Validate CD leg of XABCD
  Parameters:
    cd
    bc
    xa
    xc
    ad
    pErr
    p_types
เอกสารเผยแพร่
v82

Added:
pat_xabcdIncomplete(x_is_low, pivot_length, source, conf_length)
  Determine if an XABCD pattern is in progress (point C was just confirmed)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish M pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy]
flag = true if valid XABC pattern completed on bar_index[conf_length]
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
เอกสารเผยแพร่
v83

Added:
pat_xabcd_testSym(xax, abx, bcx, cdx, pAsym)
  Validate ΔX symmetry of XABCD pattern
  Parameters:
    xax
    abx
    bcx
    cdx
    pAsym
เอกสารเผยแพร่
v84
updated pat_xabcdIncomplete()
เอกสารเผยแพร่
v85
pat_xabcdIncomplete() bug fix
Divergenceharmonic_patternsstatisticstechindicatorxabcd

ไลบรารีไพน์

ด้วยเจตนารมณ์หลักของ TradingView ผู้เขียนได้เผยแพร่ Pine code นี้เป็นโอเพนซอร์ซไลบรารีเพื่อให้ Pine โปรแกรมเมอร์คนอื่นในชุมชนของเราสามารถนำไปใช้ซ้ำได้ ต้องขอบคุณผู้เขียน! คุณสามารถใช้ไลบรารีนี้ในแบบส่วนตัวหรือในการเผยแพร่แบบโอเพนซอร์สอื่น ๆ แต่การนำโค้ดนี้ไปใช้ในการเผยแพร่ซ้ำจะต้องอยู่ภายใต้ กฎระเบียบการใช้งาน


และใน:

คำจำกัดสิทธิ์ความรับผิดชอบ