Inversion Fair Value Gap Oscillator | Flux Charts💎 GENERAL OVERVIEW
Introducing the new Inversion Fair Value Gap Oscillator (IFVG Oscillator) indicator! This unique indicator identifies and tracks Inversion Fair Value Gaps (IFVGs) in price action, presenting them in an oscillator format to reveal market momentum based on IFVG strength. It highlights bullish and bearish IFVGs while enabling traders to adjust detection sensitivity and apply volume and ATR-based filters for more precise setups. For more information about the process, check the "📌 HOW DOES IT WORK" section.
Features of the new IFVG Oscillator:
Fully Customizable FVG & IFVG Detection
An Oscillator Approach To IFVGs
Divergence Markers For Potential Reversals
Alerts For Divergence Labels
Customizable Styling
📌 HOW DOES IT WORK?
Fair Value Gaps are price gaps within bars that indicate inefficiencies, often filled as the market retraces. An Inversion Fair Value Gap is created in the opposite direction once a FVG gets invalidated. The IFVG Oscillator scans historical bars to identify these gaps, then filters them based on ATR or volume. Each IFVG is marked as bullish or bearish according to the opposite direction of the original FVG that got invalidated.
An oscillator is calculated using recent IFVGs with this formula :
1. The Oscillator starts as 0.
2. When a new IFVG Appears, it contributes (IFVG Width / ATR) to the oscillator of the corresponding type.
3. Each confirmed bar, the oscillator is recalculated as OSC = OSC * (1 - Decay Coefficient)
The oscillator aggregates and decays past IFVGs, allowing recent IFVG activity to dominate the signal. This approach emphasizes current market momentum, with oscillations moving bullish or bearish based on IFVG intensity. Divergences are marked where IFVG oscillations suggest potential reversals. Bullish Divergence conditions are as follows :
1. The current candlestick low must be the lowest of last 25 bars.
2. Net Oscillator (Shown in gray line by default) must be > 0.
3. The current Bullish IFVG Oscillator value should be no more than 0.1 below the highest value from the last 25 bars.
Traders can use divergence signals to get an idea of potential reversals, and use the Net IFVG Oscillator as a trend following marker.
🚩 UNIQUENESS
The Inversion Fair Value Gap Oscillator stands out by converting IFVG activity into an oscillator format, providing a momentum-based visualization of IFVGs that reveals market sentiment dynamically. Unlike traditional indicators that statically mark IFVG zones, the oscillator decays older IFVGs over time, showing only the most recent, relevant activity. This approach allows for real-time insight into market conditions and potential reversals based on oscillating IFVG strength, making it both intuitive and powerful for momentum trading.
Another unique feature is the combination of customizable ATR and volume filters, letting traders adapt the indicator to match their strategy and market type. You can also set-up alerts for bullish & bearish divergences.
⚙️ SETTINGS
1. General Configuration
Decay Coefficient -> The decay coefficient for oscillators. Increasing this setting will result in oscillators giving the weight to recent IFVGs, while decreasing it will distribute the weight equally to the past and recent IFVGs.
2. Fair Value Gaps
Zone Invalidation -> Select between Wick & Close price for FVG Zone Invalidation.
Zone Filtering -> With "Average Range" selected, algorithm will find FVG zones in comparison with average range of last bars in the chart. With the "Volume Threshold" option, you may select a Volume Threshold % to spot FVGs with a larger total volume than average.
FVG Detection -> With the "Same Type" option, all 3 bars that formed the FVG should be the same type. (Bullish / Bearish). If the "All" option is selected, bar types may vary between Bullish / Bearish.
Detection Sensitivity -> You may select between Low, Normal or High FVG detection sensitivity. This will essentially determine the size of the spotted FVGs, with lower sensitivies resulting in spotting bigger FVGs, and higher sensitivies resulting in spotting all sizes of FVGs.
3. Inversion Fair Value Gaps
Zone Invalidation -> Select between Wick & Close price for IFVG Zone Invalidation.
4. Style
Divergence Labels On -> You can switch divergence labels to show up on the chart or the oscillator plot.
การวิเคราะห์แนวโน้ม
Support & Resistance AI LevelScopeSupport & Resistance AI LevelScope
Support & Resistance AI LevelScope is an advanced, AI-driven tool that automatically detects and highlights key support and resistance levels on your chart. This indicator leverages smart algorithms to pinpoint the most impactful levels, providing traders with a precise, real-time view of critical price boundaries. Save time and enhance your trading edge with effortless, intelligent support and resistance identification.
Key Features:
AI-Powered Level Detection: The LevelScope algorithm continuously analyzes price action, dynamically plotting support and resistance levels based on recent highs and lows across your chosen timeframe.
Sensitivity Control: Customize the sensitivity to display either major levels for a macro view or more frequent levels for detailed intraday analysis. Easily adjust to suit any trading style or market condition.
Level Strength Differentiation: Instantly recognize the strength of each level with visual cues based on how often price has touched each one. Stronger levels are emphasized, highlighting areas with higher significance, while weaker levels are marked subtly.
Customizable Visuals: Tailor the look of your chart with customizable color schemes and line thickness options for strong and weak levels, ensuring clear visibility without clutter.
Proximity Alerts: Receive alerts when price approaches key support or resistance, giving you a heads-up for potential market reactions and trading opportunities.
Who It’s For:
Whether you're a day trader, swing trader, or just want a quick, AI-driven way to identify high-probability levels on your chart, Support & Resistance AI LevelScope is designed to keep you focused and informed. This indicator is the perfect addition to any trader’s toolkit, empowering you to make more confident, data-backed trading decisions with ease.
Upgrade your analysis with AI-powered support and resistance—no more manual lines, only smart levels!
Rule No.1: Advanced Trading IndicatorRule No.1: Advanced Trading Indicator
This indicator combines multiple trading strategies and tools to assist traders in making informed decisions. Key features include:
EMA Crossovers: Identifies buy and sell signals based on short and long EMA crossovers.
Supertrend Signals: Provides Supertrend-based buy and sell signals.
RSI Alerts: Highlights overbought and oversold conditions using RSI.
Support and Resistance Lines: Automatically plots liquidity swing highs and lows.
Smart Money Concepts: Displays higher highs (HH) and lower lows (LL) for trend analysis.
Risk Management Tools: Calculates and displays Take Profit (TP) and Stop Loss (SL) levels based on ATR or percentage methods.
Volume Oscillator Alerts: Detects volume spikes that may indicate significant market moves.
Customizable Alerts: Allows users to enable or disable specific alerts according to their trading preferences.
How to Use:
Settings: Customize the indicator settings to fit your trading style.
Entry Price: Manually set an entry price to calculate TP and SL levels.
Alerts: Enable the desired alerts to receive notifications on trading signals.
Disclaimer:
This indicator is a tool to assist in technical analysis and should not be considered as financial advice. Always conduct your own analysis before making trading decisions.
Volumetric Rejection Blocks [UAlgo]The Volumetric Rejection Blocks is designed to help traders identify and visualize key price levels where volumetric rejections occur, which may indicate a shift in market sentiment. These rejections can signal potential trend reversals or areas where price action is likely to face support or resistance. By drawing rejection blocks based on volumetric strength, the indicator allows users to observe where significant buying or selling pressure has been exerted, which can be used as a reference point for future price action.
Also indicator dynamically calculates swing highs and lows, analyzes bullish and bearish strengths based on volume-weighted price movements, and displays rejection blocks on the chart. Each rejection block represents an area where the price attempted to move beyond a certain level but faced rejection, either on a close or wick basis. This can be particularly useful for traders who rely on market structure and order flow to make informed decisions about entering or exiting trades.
🔶 Key Features
Swing Length Customization: Allows users to define the swing length, helping tailor the sensitivity of the swing high and low detection to the specific market conditions.
Rejection Block Visualization: Displays up to the last 10 rejection blocks based on user settings, clearly marking areas of significant bullish or bearish rejections.
Volumetric Strength Analysis: The indicator calculates bullish and bearish strength for each rejection block, based on volume-weighted price movements over the last few bars, giving insight into the intensity of the rejection.
Violation Check Type: Offers two options for violation detection—"Close" and "Wick". This allows traders to specify whether a price level is considered broken only if it closes beyond the level or if any wick breaches it.
Bullish and Bearish Block Coloring: Rejection blocks are colored to represent bullish (green) and bearish (red) rejection areas. The color transparency can be adjusted for clear visibility overlaid on the price chart.
Market Structure Labels: Labels and lines marking "Market Structure Shift" (MSS) and "Break of Structure" (BOS) are displayed, giving traders context about significant market structure changes.
🔶 Interpreting the Indicator
Rejection Blocks: These colored blocks on the chart indicate areas where the price faced significant buying or selling pressure. A green block suggests a bullish rejection (support zone), where buyers absorbed the sell-off, potentially pushing the price upward. Conversely, a red block indicates a bearish rejection (resistance zone), where sellers overpowered buyers, potentially driving the price lower.
Strength Analysis: The width of the green and red sections within a rejection block represents the relative bullish and bearish strengths. A wider green section indicates stronger bullish support, while a wider red section suggests more robust bearish resistance. This helps traders gauge the likelihood of price holding or breaching these levels.
Market Structure Shift (MSS) and Break of Structure (BOS): The indicator automatically detects and labels significant changes in market structure. An "MSS" label indicates the first break, suggesting a potential shift in trend direction. A "BOS" label indicates a subsequent confirmation in trend direction, allowing traders to recognize potential trend continuations.
Violation Check: Traders can choose how to interpret breaks of these rejection blocks. Using the "Close" option provides a more conservative approach, requiring a close beyond the level for confirmation. The "Wick" option is more aggressive, treating any wick beyond the level as a break.
🔶 Disclaimer
Use with Caution: This indicator is provided for educational and informational purposes only and should not be considered as financial advice. Users should exercise caution and perform their own analysis before making trading decisions based on the indicator's signals.
Not Financial Advice: The information provided by this indicator does not constitute financial advice, and the creator (UAlgo) shall not be held responsible for any trading losses incurred as a result of using this indicator.
Backtesting Recommended: Traders are encouraged to backtest the indicator thoroughly on historical data before using it in live trading to assess its performance and suitability for their trading strategies.
Risk Management: Trading involves inherent risks, and users should implement proper risk management strategies, including but not limited to stop-loss orders and position sizing, to mitigate potential losses.
No Guarantees: The accuracy and reliability of the indicator's signals cannot be guaranteed, as they are based on historical price data and past performance may not be indicative of future results.
Power Core MAThe Power Core MA indicator is a powerful tool designed to identify the most significant moving average (MA) in a given price chart. This indicator analyzes a wide range of moving averages, from 50 to 400 periods, to determine which one has the strongest influence on the current price action.
The blue line plotted on the chart represents the "Current Core MA," which is the moving average that is most closely aligned with other nearby moving averages. This line indicates the current trend and potential support or resistance levels.
The table displayed on the chart provides two important pieces of information. The "Current Core MA" value shows the length of the moving average that is currently most influential. The "Historical Core MA" value represents the average length of the most influential moving averages over time.
This indicator is particularly useful for traders and analysts who want to identify the most relevant moving average for their analysis. By focusing on the moving average that has the strongest historical significance, users can make more informed decisions about trend direction, support and resistance levels, and potential entry or exit points.
The Power Core MA is an excellent tool for those interested in finding the strongest moving average in the price history. It simplifies the process of analyzing multiple moving averages by automatically identifying the most influential one, saving time and providing valuable insights into market dynamics.
By combining current and historical data, this indicator offers a comprehensive view of the market's behavior, helping traders to adapt their strategies to the most relevant timeframes and trend strengths.
Humble Linear Regression Candles & UT Bot Alerts compilationLinear Regression Candles by ugurvu & UT Bot Alerts by QuantNomad are the codes created by respective owners. I have compiled both codes into one indicator. For any further information / clarification check with respective individual indicator's scripts.
MTF TREND/RSIMTF TREND ANALYSIS
JUST A THEORY
USING RSI FROM xdecow as well for just an added confluence
someone wanted to use this so i decided to publish for just open source use not sure how accurate any of this is
Engulfing BoxThe Engulfing Box indicator is a custom script designed to visually highlight and track bullish and bearish engulfing candlestick patterns on a price chart. These patterns are often used to identify potential reversal points, making them valuable for technical analysis. The script dynamically draws colored boxes around these patterns, helping users easily spot them in the price action.
Key Features:
Bullish Engulfing Pattern: When a candlestick fully engulfs the previous bearish candle (i.e., the close of the current candle is higher than the open of the previous candle, and the open is lower than the close of the previous candle), the script draws a green box around the bullish engulfing candle. This box is drawn from the open of the previous candle to the low of the previous candle.
Bearish Engulfing Pattern: When a candlestick fully engulfs the previous bullish candle (i.e., the close of the current candle is lower than the open of the previous candle, and the open is higher than the close of the previous candle), a red box is drawn around the bearish engulfing candle. This box is drawn from the open of the previous candle to the high of the previous candle.
Dynamic Box Management: Once an engulfing pattern is detected, a box is drawn with the following attributes:
Bullish Engulfing Box: Green, with a transparent background.
Bearish Engulfing Box: Red, with a transparent background.
The box will adjust its color to gray if the price moves past certain thresholds, indicating that the engulfing pattern may no longer be as relevant.
Max Pattern Tracking: The script limits the number of engulfing boxes tracked on the chart to prevent clutter. The maximum number of bullish and bearish engulfing patterns shown is customizable (set to 500 by default), and once this limit is exceeded, older boxes are deleted to maintain a clean chart.
Pattern Expiry: Boxes are deleted if price action moves beyond the pattern’s range, ensuring that outdated signals are removed. If the low price falls below the bottom of the bullish engulfing box, or the high price rises above the top of the bearish engulfing box, the respective box is removed. Additionally, if the low price moves below the top of the bullish box or the high price exceeds the bottom of the bearish box, the box's color is changed to a more neutral tone.
How it Works:
Pattern Detection: The script compares the current price data with the previous candlestick to detect the bullish or bearish engulfing patterns.
Box Creation: If a pattern is detected, a colored box is drawn around the candle to visually highlight the pattern.
Pattern Expiry and Cleanup: The script continuously monitors past boxes. If the price moves too far from the box’s range, the box is either deleted or altered to reflect the reduced significance of the pattern.
B ox Count Limit: To avoid clutter, the script ensures that no more than 500 bullish or bearish engulfing boxes are shown at any time.
Customization:
The number of previous bars to scan for engulfing patterns can be adjusted (maxBarsback).
The maximum number of patterns displayed at any time can be modified.
13/200 EMA Cross with pullback entry (Trend Filter)This indicator first tracks a 13/200 ema cross
then provides a trend affirming dot as the price pulls back to the 13 ema
allowing for optimal trend following entry opportunities.
Indicator includes a 13 and 200 ema and customizable icons to your liking
Also the indicator does not include signals contrary to the trend
(only bullish pullbacks above 200 ema and only bearish below)
as per trend following rules
enjoy :)
30 min Aroon Datlı Strategy Use 30 minute with 100 SMA. If it buys above 100 SMA a long trade will be entered. If it sells below 100 SMA short trade will be entered.
Dynamic Trading Strategy with Key Levels, Entry/Exit Managementjust a strategy tester i dont have any copy right of this indicator
30 min Aroon Datlı StrategyUse 30 minute with 100 SMA. If it buys above 100 SMA a long trade will be entered. If it sells below 100 SMA short trade will be entered.
Rainbow EMA Areas with Volatility HighlightThe indicator provides traders with an enhanced visual tool to observe price movements, trend strength, and market volatility on their charts. It combines multiple EMAs (Exponential Moving Averages) with color-coded areas to indicate the market’s directional bias and a high-volatility highlight for detecting times of increased market activity.
Explanation of Key Components
Multiple EMAs (Exponential Moving Averages):
Six different EMAs are calculated for various periods (15, 45, 100, 150, 200, 300).
Each EMA period represents a different timeframe, from short-term to long-term trends, providing a well-rounded view of price behavior across different market cycles.
The EMAs are color-coded for easy differentiation:
Green shades indicate bullish trends when prices are above the EMAs.
Red shades indicate bearish trends when prices are below the EMAs.
The space between each EMA is filled with a gradient color, creating a "wave" effect that helps identify the market’s overall direction.
ATR-Based Volatility Detection:
The ATR (Average True Range), a measure of market volatility, is used to assess how much the price is fluctuating. When volatility is high, price movements are typically more significant, indicating potential trading opportunities or times to exercise caution.
The indicator calculates ATR and uses a customizable multiplier to set a high-volatility threshold.
When the ATR exceeds this threshold, it signals that the market is experiencing high volatility.
Visual High Volatility Highlight:
A yellow background appears on the chart during periods of high volatility, giving a subtle but clear visual indication that the market is active.
This highlight helps traders spot potential breakout areas or increased activity zones without obstructing the EMA areas.
Volatility Signal Markers:
Small, red triangular markers are plotted above price bars when high volatility is detected, marking these areas for additional emphasis.
These signals serve as alerts to help traders quickly recognize high volatility moments where price moves may be stronger.
How to Use This Indicator
Identify Trends Using EMA Areas:
Bullish Trend: When the price is above most or all EMAs, and the EMA areas are colored in shades of green, it indicates a strong bullish trend. Traders might look for buy opportunities in this scenario.
Bearish Trend: When the price is below most or all EMAs, and the EMA areas are colored in shades of red, it signals a bearish trend. This condition can suggest potential sell opportunities.
Consolidation or Neutral Trend: If the price is moving within the EMA bands without a clear green or red dominance, the market may be in a consolidation phase. This period often precedes a breakout in either direction.
Volatility-Based Entries and Exits:
High Volatility Areas: The yellow background and red triangular markers signal high-volatility areas. This information can be valuable for identifying potential breakout points or strong moves.
Trading in High Volatility: During high-volatility phases, the market may experience rapid price changes, which can be ideal for breakout trades. However, high volatility also involves higher risk, so traders may adjust their strategies accordingly (e.g., setting wider stops or adjusting position sizes).
Trading in Low Volatility: When the yellow background and markers are absent, volatility is lower, indicating a calmer market. In these times, traders may choose to look for range-bound trading opportunities or wait for the next trend to develop.
Combining with Other Indicators:
This indicator works well in combination with momentum or oscillating indicators like RSI or MACD, providing a well-rounded view of the market.
For example, if the indicator shows a bullish EMA area with high volatility, and an RSI is trending up, it could be a stronger buy signal. Conversely, if the indicator shows a bearish EMA area with high volatility and RSI is trending down, this could be a stronger sell signal.
Practical Trading Examples
Bullish Trend in High Volatility:
Price is above the EMAs, showing green EMA areas, and the high volatility background is active.
This indicates a strong bullish trend with significant price movement potential.
A trader could look for breakout or continuation entries in the direction of the trend.
Bearish Reversal Signal:
Price crosses below the EMAs, showing red EMA areas, while high volatility is also detected.
This suggests that the market may be reversing to a bearish trend with increased price movement.
Traders could consider taking short positions or setting stops on existing long trades.
This indicator is designed to provide a rich visual experience, making it easy to spot trends, consolidations, and volatility zones at a glance. It is best used by traders who benefit from visual cues and who seek a quick understanding of both trend direction and market activity. Let me know if you'd like further customization or additional functionalities!
Simplified MetroThis is a derivative of J. Welles Wilder's RSI (Relative Strength Index) from 1978. This version uses a fast and slow offset of the RSI to create signals. The RSI itself has been removed from this version for visual simplicity, but its setting still has an impact on the fast and slow stepped lines.
The "RSI Period" sets the number of bars used to calculate the RSI. A higher value results in a smoother RSI, while a lower value makes it more reactive to price changes.
The "Fast Step Size" defines the step size for the fast trend line. A larger value makes the fast step line less sensitive to RSI changes, creating a smoother line.
The "Slow Step Size" defines the step size for the slow trend line. A larger value makes the slow step line less sensitive to RSI changes, resulting in a smoother line compared to the fast step.
When the faster blue line crosses and closes above the slower fuchsia line we have a signal to go long, and vice versa we take a short position.
This indicator should not be traded on its own, but could be a valuable addition to a system used for identifying trends.
Strong 3rd Wave Signal with Filter By DemirkanUsage Explanation:
The Strong 3rd Wave Signal with Filter indicator is designed to help traders identify high-quality entry points for the beginning of strong uptrends, particularly in the context of Elliott Wave Theory. This indicator integrates multiple technical analysis tools to ensure that only the most reliable signals are generated, avoiding noise and weak trends.
This indicator is built on the following key components:
HMA (Hull Moving Average): The Hull Moving Average is used to capture the trend direction, filtering out market noise. A rising HMA indicates an uptrend, while a falling HMA signals a downtrend.
RSI (Relative Strength Index): RSI is used to confirm that the market is not in an overbought condition when a buy signal is generated. The indicator ensures that the RSI stays within a neutral range, indicating a healthy market condition for potential trend continuation.
ADX (Average Directional Index): ADX is employed to confirm whether the market is in a strong trend. The indicator ensures that only strong trends with a sufficient level of momentum are considered, filtering out weak or sideways markets.
Volume Filter: The indicator uses volume analysis to confirm that the price movement is supported by sufficient market participation. Buy signals are only triggered when the volume exceeds the average volume by a specified multiplier.
EMA 200 and SMA 50: The 200-period Exponential Moving Average (EMA) is used to identify the long-term market trend, while the 50-period Simple Moving Average (SMA) helps in filtering out signals that occur outside of a favorable trend zone. The indicator only generates buy signals when the price is below the EMA 200 but above the SMA 50, ensuring that the market is in a mid-term bullish trend.
How to Use:
Buy Signals: The indicator will plot a Buy Signal when the following conditions are met:
Price is above the 50-period SMA and below the 200-period EMA, indicating a potential uptrend within a mid-term bullish trend.
The Hull Moving Average is rising, signaling an uptrend.
RSI is in a neutral zone (not overbought).
Volume exceeds the average volume, confirming the strength of the move.
Price is making higher highs compared to the last 10 bars, showing increasing buying momentum.
Trend Confirmation: The indicator is designed to avoid generating false signals during weak or sideways trends. By using ADX and volume filters, it ensures that signals are only triggered during strong, trending markets, reducing the likelihood of false breakouts or reversals.
Risk Management: While this indicator helps you identify the most promising trends, it's always recommended to use additional risk management strategies like stop-loss and take-profit levels to protect your investments.
Target Audience:
This indicator is suitable for traders who prefer to trade with the trend and are looking for high-quality, filtered signals that align with the Elliott Wave Theory. It is especially useful for those who focus on medium- to long-term trades and wish to avoid choppy, low-volume market conditions.
Key Benefits:
Helps identify strong uptrends with high probability.
Avoids weak and sideways markets.
Integrates multiple filters like HMA, RSI, ADX, Volume, and EMA/SMA to ensure the quality of the signals.
Focuses on confirming strong trends based on Elliott Wave principles, providing a structured approach for trend-following strategies.
By using this indicator, traders can focus on high-quality setups and improve their decision-making process by filtering out noise and low-probability trades.
RVI-Based Support & Resistance[Kopottaja]RVI-Based Support & Resistance
This indicator is designed to identify dynamic support and resistance levels based on the Relative Vigor Index (RVI) crossover signals. Instead of using static horizontal lines, it marks key levels on the chart using cross symbols (X) where recent Buy and Sell signals occurred.
Green crosses (X) represent potential support levels based on the last Buy signal.
Red crosses (X) indicate potential resistance levels based on the last Sell signal.
The indicator dynamically updates the support and resistance levels whenever a new signal appears.
Features:
Utilizes Relative Vigor Index (RVI) with a customizable length for trend detection.
Displays cross symbols on the chart at the price levels where the latest Buy and Sell signals were detected.
Provides built-in alerts for new Buy and Sell signals, allowing users to react quickly to potential market changes.
Usage:
Green crosses may indicate areas where the price could find support if revisited.
Red crosses may suggest areas where the price could encounter resistance.
Use this tool in conjunction with other technical indicators or trading strategies for enhanced decision-making.
This indicator is suitable for traders looking for a visual representation of key support and resistance levels that adjust dynamically with market conditions.
Yorks RSI Combined Bull and Bear Zone with Adjustable TimeframeBased on 'RSI with Divergences, Reverse Formulas, and Bull/Bear Zones by @kylealberry
I have combined two of Kyle's script together with the option of having one set to current time frame and a second on a higher time frame. You can choose your own theshold's for bull/bear zones on both time frames. When both time frames are in agreement the indicator will show either a green (bull zone) or red (bear zone) background. When the two time frame bull/bear zones are not in agreement the indicator will show a grey background (no trade zone).
For example if you have rsi 1 thresholds set to 35 and 65 and rsi 2 thresholds both set to 50 on your chosen higher time frame, when rsi is in a bull zone (rsi has crossed above 65 and not yet crossed below 35) and rsi 2 is above 50 on higher time frame the indicator background will be green. If rsi drops below 50 the background will turn grey.
My idea for use it is in either a red or green background wait for a pullback (background must remain red or green) and use your favourite entry trigger. Avoid trading when the indicator is showing a grey background.
EMA Cross + RSI Pullback Strategy with 1H ConfirmationThis strategy combines an ema9 and ema21 cross on the 15min timeframe with a short retest of the RSI 50-line (or close to the RSI 50-line) on the candle before the cross, on the cross, or one or two candles after the cross.
The script uses higher time frame confirmation on the 1 hour. It gives only a buy signal on the 15 minute if on the 1 hour the ema21 is above the ema 50. It gives only a sell signal on the 15 minute if on the 1 hour the ema21 is below the ema50.
It is still in the testing phase. So please backtest this strategy before putting money in the game. I combine my trading with the ATR stoploss finder set on 0.8 (instead of 1.5 default) and aim for RR 1:2 or better.
Please feel free to comment (nicely and polite) ;)
Cruce de Medias TotalEs una mejora de la estrategia Cruce de Medias Avanzado permitiendo añadir una tercera media móvil y también permitiendo operar en corto.
Al ser una estrategia se puede ir afinando el rendimiento y personalizando no sólo los períodos de las 3 medias móviles sino activando o desactivando la posibilidad de operar con tres medias o sólo con dos, y también activando o desactivando la opción de operar en corto.
En resumen, es una estrategia de cruce de medias, tienes 7 tipos de medías móviles a elegir, y la posibilidad de operar en corto activando pestaña y también la opción de incluir una tercera media móvil. Por defecto sólo aparece la rentabilidad de operaciones largas (de compras) y cruce de 2 medias móviles.
FOLLOW TREND CUANTEROUSSS//@version=5
indicator("Follow Trend EMA Volume", overlay=true)
/// Mengatur panjang EMA yang dibutuhkan
ema5 = ta.ema(close, 5)
ema7 = ta.ema(close, 7)
ema21 = ta.ema(close, 21)
ema34 = ta.ema(close, 34)
ema55 = ta.ema(close, 55)
ema90 = ta.ema(close, 90)
ema100 = ta.ema(close, 100)
ema161 = ta.ema(close, 161)
ema200 = ta.ema(close, 200)
/// Menghitung rata-rata EMA untuk menentukan tren dominan
ema_avg = (ema5 + ema7 + ema21 + ema34 + ema55 + ema90 + ema100 + ema161 + ema200) / 9
/// Menghitung volume rata-rata untuk menyaring sinyal
vol_avg = ta.sma(volume, 20) // Volume rata-rata 20 periode
/// Aturan untuk trend dominan berdasarkan posisi harga terhadap EMA rata-rata
bullish_trend = close > ema_avg and volume > vol_avg
bearish_trend = close < ema_avg and volume > vol_avg
/// Warna berdasarkan trend dominan
color_trend = bullish_trend ? color.blue : bearish_trend ? color.red : na
/// Plot garis trend dengan warna yang berubah
plot(ema_avg, color=color_trend, linewidth=3, title="Trend Line")
Option Delta CandlesDescription:
The Option Delta Candles with EMA indicator is designed to help traders visualize option delta values as candlesticks, calculated using the Black-Scholes model. It provides a unique way to view the cumulative delta changes in a normalized format, making it easier to identify trends and reversals. The addition of an EMA (Exponential Moving Average) overlay helps smooth out the data for better trend analysis.
Features:
Customizable Inputs:
Risk-Free Interest Rate: Adjust the risk-free rate for more precise option calculations.
Volatility: Input the volatility of the underlying asset to reflect current market conditions.
Strike Price: Enter the desired strike price of the option.
Days to Expiration: Specify the days until the option's expiration.
EMA Length: Modify the length of the EMA to suit different time frames and trading styles.
Visual Styles:
Customizable candle colors for bullish and bearish candles.
Configurable border and wick colors for personalized chart aesthetics.
How It Works:
The indicator uses the Black-Scholes model to calculate the delta of a European call option. Delta measures the sensitivity of the option's price to changes in the price of the underlying asset.
A cumulative delta is calculated and normalized to create candlestick representations, providing a visual cue of how the option delta changes over time.
The scaled delta values are normalized between 0 and 1, allowing for a consistent view of relative strength and weakness.
The EMA overlay helps identify smoothed trends and potential reversals within the delta data.
Applications:
Trend Identification: The indicator helps spot trends and potential reversals in option delta movements.
Volatility Analysis: By visualizing option delta, traders can gain insight into how changes in volatility impact options pricing.
Advanced Analysis: This tool is ideal for options traders and analysts looking to integrate delta analysis into their strategies.
Use Cases:
Traders can use the candlestick view to understand shifts in market sentiment through delta changes.
Options Analysts can visualize delta fluctuations over time, aiding in complex options trading strategies.
Technical Analysts may combine this indicator with other tools to confirm signals and enhance trading decisions.
Indicator Configuration:
Input Settings:
Risk-free interest rate (as a percentage).
Volatility (standard deviation) in percentage.
Strike price of the option.
Days remaining until expiration.
EMA length for trend analysis.
Style Customization:
Select colors for bullish and bearish candles, border, and wicks.
Change the color of the EMA line to distinguish it on the chart.
Release Notes:
Initial Version: Includes full implementation of the Black-Scholes delta calculation with customizable EMA and normalized candlestick view.
Future Updates: Potential additions may include enhancements for put options and integrated alerts.
Supertrend EMA & KNNSupertrend EMA & KNN
The Supertrend EMA indicator cuts through the noise to deliver clear trend signals.
This tool is built using the good old Exponential Moving Averages (EMAs) with a novel of machine learning; KNN (K Nearest Neighbors) breakout detection method.
Key Features:
Effortless Trend Identification: Supertrend EMA simplifies trend analysis by automatically displaying a color-coded EMA. Green indicates an uptrend, red signifies a downtrend, and the absence of color suggests a potential range.
Dynamic Breakout Detection: Unlike traditional EMAs, Supertrend EMA incorporates a KNN-based approach to identify breakouts. This allows for faster color changes compared to standard EMAs, offering a more dynamic picture of the trend.
Customizable Parameters: Fine-tune the indicator to your trading style. Adjust the EMA length for trend smoothing, KNN lookback window for breakout sensitivity, and breakout threshold for filtering noise.
A Glimpse Under the Hood:
Dual EMA Power: The indicator utilizes two EMAs. A longer EMA (controlled by the "EMA Length" parameter) provides a smooth trend direction, while a shorter EMA (controlled by the "Short EMA Length" parameter) triggers color changes, aiming for faster response to breakouts.
KNN Breakout Detection: This innovative feature analyzes price action over a user-defined lookback period (controlled by the "KNN Lookback Length" parameter) to identify potential breakouts. If the price surpasses a user-defined threshold (controlled by the "Breakout Threshold" parameter) above the recent highs, a green color is triggered, signaling a potential uptrend. Conversely, a breakdown below the recent lows triggers a red color, indicating a potential downtrend.
Trading with Supertrend EMA:
Ride the Trend: When the indicator displays green, look for long (buy) opportunities, especially when confirmed by bullish price action patterns on lower timeframes. Conversely, red suggests potential shorting (sell) opportunities, again confirmed by bearish price action on lower timeframes.
Embrace Clarity: The color-coded EMA provides a clear visual representation of the trend, allowing you to focus on price action and refine your entry and exit strategies.
A Word of Caution:
While Supertrend EMA offers faster color changes than traditional EMAs, it's important to acknowledge a slight inherent lag. Breakout detection relies on historical data, and there may be a brief delay before the color reflects a new trend.
To achieve optimal results, consider:
Complementary Tools: Combine Supertrend EMA with other indicators or price action analysis for additional confirmation before entering trades.
Solid Risk Management: Always practice sound risk management strategies such as using stop-loss orders to limit potential losses.
Supertrend EMA is a powerful tool designed to simplify trend identification and enhance your trading experience. However, remember, no single indicator guarantees success. Use it with a comprehensive trading strategy and disciplined risk management for optimal results.
Disclaimer:
While the Supertrend EMA indicator can be a valuable tool for identifying potential trend changes, it's important to note that it's not infallible. Market conditions can be highly dynamic, and indicators may sometimes provide false signals. Therefore, it's crucial to use this indicator in conjunction with other technical analysis tools and sound risk management practices. Always conduct thorough research and consider consulting with a financial advisor before making any investment decisions.
